This adds support for the RISCV architecture (32 and 64 bit) to the
nolibc header file.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[willy: minimal rewording of the commit message]
Signed-off-by: Willy Tarreau <w@1wt.eu>
The line6 toneport driver has code for some delayed initialization,
and this hits the kernel Oops because mutex and other sleepable
functions are used in the timer callback. Fix the abuse by a delayed
work instead so that everything works gracefully.
Reported-by: syzbot+a07d0142e74fdd595cfb@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When get_buf_states() gets called with count > 1, it scans the
corresponding number of SBAL states until it encounters a mismatch.
But when these SBALs are in a HW-owned state, the callers don't actually
care _how many_ such SBALs are on the queue. If we can't process the
first SBAL, we can't process any of the following SBALs either. So when
the first SBAL is HW-owned, skip the scan of the remaining SBALs and
thus save some CPU time.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
For a 1-SBAL state inspection, use the corresponding helper.
No functional change, just reducing the number of immediate callers to
get_buf_states().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Old code restricted the number of inspected SBALs to
QDIO_MAX_BUFFERS_PER_Q - 1, as otherwise the first_to_check and
first_to_kick cursors could overlap. Subsequent code would then assume that
there was no progress on the queue, when in fact _all_ SBALs on the queue
were ready-to-process.
This limitation no longer applies, so allow the queue-scan code to inspect
all SBALs on the queue. Note that qeth requires an additional patch
("s390/qeth: stop/wake TX queues based on their fill level"), to avoid
potential queue stalls when all 128 SBALs are reported as ready-to-process.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Since commit d485235b00 "s390: assume diag308 set always works",
the kernel does not use the rchp instruction anymore. So let's
remove the tracing for it.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix the following build error when the kernel is built with CONFIG_KASAN
broken since commit 98587c2d89 ("s390: simplify disabled_wait"):
arch/s390/mm/kasan_init.c: In function 'kasan_early_panic':
arch/s390/mm/kasan_init.c:31:2: error: too many arguments to function
'disabled_wait'
31 | disabled_wait(0);
Fixes: 98587c2d89 ("s390: simplify disabled_wait")
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The build of aica sound driver has been broken since the timer API
conversion and some code rewrite. This patch fixes the breakage by
using the common substream field, as well as a bit cleaning up wrt the
timer handling in the code.
Fixes: d522bb6a10 ("ALSA: sh: aica: Convert timers to use timer_setup()")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently introduced XUSB support for Jetson TX2 is causing boot, CPU
hotplug and suspend/resume failures according to several reports.
Temporarily work around this by disabling the XUSB controller and XUSB
pad controller nodes in device tree, while we figure out what's causing
this.
Reported-by: Bitan Biswas <bbiswas@nvidia.com>
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Tested-by: Bitan Biswas <bbiswas@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 954a03be03 ("iommu/arm-smmu: Break insecure users by disabling
bypass by default") intentionally breaks all devices using the SMMU in
bypass mode. This breaks, among other things, PCI support on Tegra186.
Fix this by populating the iommus property and friends for the PCIe
controller.
Fixes: 954a03be03 ("iommu/arm-smmu: Break insecure users by disabling bypass by default")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 954a03be03 ("iommu/arm-smmu: Break insecure users by disabling
bypass by default") intentionally breaks all devices using the SMMU in
bypass mode. This is breaking various devices on Tegra186 which include
the ethernet, BPMP and HDA device. Fix this by populating the iommus
property for these devices with their stream ID.
Fixes: 954a03be03 ("iommu/arm-smmu: Break insecure users by disabling bypass by default")
Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable ARM_GIC_PM for 64-bit Tegra devices. This is required to ensure
that the driver gets built into kernel and helps to register the AGIC
device when enabled in DT.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
clang warns about an unused variable when CONFIG_PM is disabled, since
it is only referenced from an #ifdef:
drivers/amba/tegra-ahb.c:97:18: error: variable 'tegra_ahb_gizmo' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
Rather than trying to get the #ifdef right, remove it and use
__maybe_unused here, which is less error prone.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
nested_run_pending=1 implies we have successfully entered guest mode.
Move setting from external state in vmx_set_nested_state() until after
all other checks are complete.
Based on a patch by Aaron Lewis.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add tests for KVM_SET_NESTED_STATE and for various code paths in its implementation in vmx_set_nested_state().
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch cleans up fuse_alloc_inode function, just simply the code, no
logic change.
Signed-off-by: zhangliguang <zhangliguang@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Provide system power-off functionality that allows to turn off machine
gracefully.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for Maxim 77663 using the Max77620 driver. The hardware
is very similar to Max77663/20024, although there are couple minor
differences.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Document new generic property that designates the PMIC as the system's
power controller.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Maxim 77663 has a few minor differences in regards to hardware interface
and available capabilities by comparing it with 77620 and 20024 models,
hence re-use 77620 device-tree binding for the 77663.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The previous KVM_CAP_MANUAL_DIRTY_LOG_PROTECT has some problem which
blocks the correct usage from userspace. Obsolete the old one and
introduce a new capability bit for it.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just imaging the case where num_pages < BITS_PER_LONG, then the loop
will be skipped while it shouldn't.
Signed-off-by: Peter Xu <peterx@redhat.com>
Fixes: 2a31b9db15
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_dirty_bitmap_bytes() will return the size of the dirty bitmap of
the memslot rather than the size of bitmap passed over from the ioctl.
Here for KVM_CLEAR_DIRTY_LOG we should only copy exactly the size of
bitmap that covers kvm_clear_dirty_log.num_pages.
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 2a31b9db15
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This nasty little syzbot repro:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Creates overlay mounts where the same directory is both in upper and lower
layers. Simplified example:
mkdir foo work
mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work"
The repro runs several threads in parallel that attempt to chdir into foo
and attempt to symlink/rename/exec/mkdir the file bar.
The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests
that an overlay inode already exists in cache and is hashed by the pointer
of the real upper dentry that ovl_create_real() has just created. At the
point of the WARN_ON(), for overlay dir inode lock is held and upper dir
inode lock, so at first, I did not see how this was possible.
On a closer look, I see that after ovl_create_real(), because of the
overlapping upper and lower layers, a lookup by another thread can find the
file foo/bar that was just created in upper layer, at overlay path
foo/foo/bar and hash the an overlay inode with the new real dentry as lower
dentry. This is possible because the overlay directory foo/foo is not
locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find
it without taking upper dir inode shared lock.
Overlapping layers is considered a wrong setup which would result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn()
instead to cover all cases of failure to get an overlay inode.
The error returned from failure to insert new inode to cache with
inode_insert5() was changed to -EEXIST, to distinguish from the error
-ENOMEM returned on failure to get/allocate inode with iget5_locked().
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Fixes: 01b39dcc95 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add the core MFD driver for max77650 PMIC. We define five sub-devices
for which the drivers will be added in subsequent patches.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add a DT binding document for max77650 ultra-low power PMIC. This
describes the core mfd device and the GPIO module.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This fixes tx and bi-directional dma transfers on rk3399-gru-kevin.
It seems the SPI fifo must have room for 2 bursts when the dma_tx_req
signal is generated or it might skip some words. This in turn makes
the rx dma channel never complete for bi-directional transfers.
Fix it by setting tx burst length to fifo_len / 4 and the dma
watermark to fifo_len / 2.
However the rk3399 TRM says (sic):
"DMAC support incrementing-address burst and fixed-address burst. But in
the case of access SPI and UART at byte or halfword size, DMAC only
support fixed-address burst and the address must be aligned to word."
So this relies on fifo_len being a multiple of 16 such that the
burst length (= fifo_len / 4) is a multiple of 4 and the addresses
will be word-aligned.
Fixes: dcfc861d24 ("spi: rockchip: adjust dma watermark and burstlen")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Adjust the last two rows in the table that display possible values when
MDS mitigation is enabled. They both were slightly innacurate.
In addition, convert the table of possible values and their descriptions
to a list-table. The simple table format uses the top border of equals
signs to determine cell width which resulted in the first column being
far too wide in comparison to the second column that contained the
majority of the text.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Updated the documentation for a new CVE-2019-11091 Microarchitectural Data
Sampling Uncacheable Memory (MDSUM) which is a variant of
Microarchitectural Data Sampling (MDS). MDS is a family of side channel
attacks on internal buffers in Intel CPUs.
MDSUM is a special case of MSBDS, MFBDS and MLPDS. An uncacheable load from
memory that takes a fault or assist can leave data in a microarchitectural
structure that may later be observed using one of the same methods used by
MSBDS, MFBDS or MLPDS. There are no new code changes expected for MDSUM.
The existing mitigation for MDS applies to MDSUM as well.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Jon Masters <jcm@redhat.com>
Support setting a delay between cs assert and deassert as
a multiple of spi clock length.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
For some SPI devices that support speed_hz > 1MHz the default 10 us delay
when cs_change = 1 is typically way to long and may result in poor spi bus
utilization.
This patch makes it possible to control the delay at micro or nano second
resolution on a per spi_transfer basis. It even allows an "as fast as
possible" mode with:
xfer.cs_change_delay_unit = SPI_DELAY_UNIT_NSECS;
xfer.cs_change_delay = 0;
The delay code is shared between delay_usecs and cs_change_delay for
consistency and reuse, so in the future this change_delay_unit could also
apply to delay_usec as well.
Note that on slower SOCs/CPU actually reaching ns deasserts on cs is not
realistic as the gpio overhead alone (without any delays added ) may
already leave cs deasserted for more than 1us - at least on a raspberry pi.
But at the very least this way we can keep it as short as possible.
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
