[why]
When the system is going into suspend, set_backlight gets called
after the eDP got blanked. Since smooth brightness is enabled,
the driver will make a call into the DMCU to ramp the brightness.
The DMCU would try to enable ABM to do so. But since the display is
blanked, this ends up causing ABM1_ACE_DBUF_REG_UPDATE_PENDING to
get stuck at 1, which results in a dead lock in the DMCU firmware.
[how]
Disable brightness ramping when the eDP display is blanked.
Signed-off-by: Zi Yu Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When we recover from hang, we do not want to skip the audio enable call.
[How]
Disable audio in dc_reinitialize_hardware
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When launch D10.2, driver will write DPCD 0x107 with 0x00
[How]
Read MAX_DOWNSPREAD (0x0003h) then keep in current
link settings
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently we don't wait for blacklight programming completion in DMCU
when setting backlight level. Some sequences such as PSR static screen
event trigger reprogramming requires it to be complete.
[How]
Add generic wait for dmcu command completion in set backlight level.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hardware docs state that we must wait until the GPUVM context is ready
after programming it.
[How]
Poll until the valid bit of PAGE_TABLE_BASE_ADDR_LO32 is set to 1 after
programming it.
v2: fix include for udelay (Alex)
Signed-off-by: Julian Parkin <julian.parkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The current code will not wait for the entire frame
after global unlock.
This causes dsc dynamic target bpp update corruption when
there is a surface update immediately happens after this.
[how]
Wait for the entire whole frame after unlock before continuing
the rest of stream and surface update.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For DCE110, DCE112 and DCE120 the max_clks_by_state for the clk_mgr are
copied from their respective table before the call to
dce_clk_mgr_construct, but then dce_clk_mgr_construct overwrites
these with the dce80_max_clks_by_state.
[How]
Copy these after we call dce_clk_mgr_construct so we're using the
right tables.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We reset the optimized_required in atomic_plane_disable
flag immediately after it is set in atomic_plane_disconnect, causing us to
never have flag set during next flip in UpdatePlanes.
[how]
Optimize directly after each time plane is removed.
Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Fixes issue when we have a display connected using a passive
dongle and then emulate over it using a DP connection at 1 x 1.62 Ghz.
System hangs because register bus returns back 0xFFFFFFFF for all
register reads after setting register DIG_BE_CNTL in
dcn10_link_encoder_connect_dig_be_to_fe(). Hang occurs later
when trying to do a register read.
[How]
At the start of the emulation, dc_link_set_preferred_link_settings()
and dp_retrain_link_dp_test() is called, even though it is connected
using a passive dongle.
Add an extra condition in dp_retrain_link_dp_test() to check for
link->dongle_max_pix_clk > 0. This is the only way we know if the
connection is using passive dongle so we don't retrain DP.
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently logical values are swapped in HW, causing
system aperture to be undefined, so VA and PA cannot co-exist
[how]
program values correctly
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
'second_line_offset_adj' was mistakenly left at zero, even though DSC spec
v1.2a recommends setting this field to 512 for 4:2:0.
[how]
Set 'second_line_offset_adj' to 512 for 4:2:0 and leave at zero otherwise
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are certain MST displays (i.e. Dell P2715Q)
that although have the MST feature set to off may still
report it is a branch device and a non-zero
value for downstream port present.
This can lead to us incorrectly classifying a
dp dongle connection as being active and
disabling the audio endpoint for the display.
[How]
Modified the placement and
condition used to assign
the is_branch_dev bit.
Signed-off-by: Harmanprit Tatla <harmanprit.tatla@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Due to limitation in SMU/PPLIB, it is not possible to know Fmax @ Vmin for DCFCLK.
This causes issues at high display configurations where extra headroom of DCFCLK
can enable P-state switching
[how]
Use existing override logic. If override not defined, then force
min = 507
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some values were not being converted or bit-shifted properly for
HW registers, causing black screen
[how]
Fix up the values before programming HW
Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
On some modes SMU will be in infinite loop state at boot, this is
because driver assumes p_state_support is false, but this is the
opposite of the assumed boot state by SMU. we optimize away
notifying SMU about no pstate, and so they will get stuck
[how]
when we init clk manager, init pstate to true, so it matches driver load
assumption
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we are using the signed FW now, and also using PSP firmware loading,
but it's still potential to break driver when loading FW directly
instead of PSP, so we should add offset.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In function __ttm_dma_alloc_page(), d_page->addr is allocated
by dma_alloc_attrs() but freed with use dma_free_coherent() in
__ttm_dma_free_page().
Use the correct dma_free_attrs() to free d_page->vaddr.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2:
set average clock value on level 1 when current clock equal
min or max clock (fine grained dpm support).
the navi10 gfxclk (sclk) support fine grained DPM,
so use level 1 to show current dpm freq in sysfs pp_dpm_xxx
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this function is not needed any more. error injection is
the only way to validate ras but it can't be executed in
amdgpu_ras_init, where gpu is even not initialized
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
error injection to other IP blocks (except UMC) will be enabled
until RAS feature stablize on those IP blocks
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GDS and GWS blocks default to allowing all VMIDs to
access all entries. Graphics VMIDs can handle setting
these limits when the driver launches work. However,
compute workloads under HWS control don't go through the
kernel driver. Instead, HWS firmware should set these
limits when a process is put into a VMID slot.
Disable access to these devices by default by turning off
all mask bits (for OA) and setting BASE=SIZE=0 (for GDS
and GWS) for all compute VMIDs. If a process wants to use
these resources, they can request this from the HWS
firmware (when such capabilities are enabled). HWS will
then handle setting the base and limit for the process when
it is assigned to a VMID.
This will also prevent user kernels from getting 'stuck' in
GWS by accident if they write GWS-using code but HWS
firmware is not set up to handle GWS reset. Until HWS is
enabled to handle GWS properly, all GWS accesses will
MEM_VIOL fault the kernel.
v2: Move initialization outside of SRBM mutex
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY] dc sw clock implementation of navi10 and raven are not exact the
same. dcccg, dchub reference clock initialization is done after dc calls
vbios dispcontroller_init table. for raven family, before
dispcontroller_init is called by dc, the ref clk values are referred
by sw clock implementation and program asic register using wrong
values. this causes dchub pstate error. This need provide valid ref
clk values. for navi10, since dispcontroller_init is not called,
dchubbub_global_timer_enable = 0, hubbub2_get_dchub_ref_freq will
hit aeert. this need remove hubbub2_get_dchub_ref_freq from this
location and move to dcn20_init_hw.
[HOW] for all asic, initialize dccg, dchub ref clk with data from
vbios firmware table by default. for raven asic family, use these data
from vbios, for asic which support sw dccg component, like navi10,
read ref clk by sw dccg functions and update the ref clk.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dpm sensor function already does this for us. This fixes
the freq*_input files with the new SMU implementation.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Workaround for now to avoid underflow.
The uclk switch time should really be bumped up to 404, but doing so
would expose p-state hang issues for higher bandwidth display
configurations.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Variable allocated by kvmalloc should not be freed by kfree.
Because it may be allocated by vmalloc.
So replace kfree with kvfree here.
Fixes: 9b1f298236 ("net/mlx5: Add support for FW fatal reporter dump")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull module updates from Jessica Yu:
"Summary of modules changes for the 5.3 merge window:
- Code fixes and cleanups
- Fix bug where set_memory_x() wasn't being called when rodata=n
- Fix bug where -EEXIST was being returned for going modules
- Allow arches to override module_exit_section()"
* tag 'modules-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
modules: fix compile error if don't have strict module rwx
ARM: module: recognize unwind exit sections
module: allow arch overrides for .exit section names
modules: fix BUG when load module with rodata=n
kernel/module: Fix mem leak in module_add_modinfo_attrs
kernel: module: Use struct_size() helper
kernel/module.c: Only return -EEXIST for modules that have finished loading
cifs has both source and destination inodes locked throughout the copy.
Like ->write_iter(), we update mtime and strip setuid bits of destination
file before copy and like ->read_iter(), we update atime of source file
after copy.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a route needs to be appended to an existing multipath route,
fib6_add_rt2node() first appends it to the siblings list and increments
the number of sibling routes on each sibling.
Later, the function notifies the route via call_fib6_entry_notifiers().
In case the notification is vetoed, the route is not unlinked from the
siblings list, which can result in a use-after-free.
Fix this by unlinking the route from the siblings list before returning
an error.
Audited the rest of the call sites from which the FIB notification chain
is called and could not find more problems.
Fixes: 2233000cba ("net/ipv6: Move call_fib6_entry_notifiers up for route adds")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A Clang-built kernel is showing the following warning:
arch/x86/kernel/platform-quirks.o: warning: objtool: x86_early_init_platform_quirks()+0x84: unreachable instruction
That corresponds to this code:
7e: 0f 85 00 00 00 00 jne 84 <x86_early_init_platform_quirks+0x84>
80: R_X86_64_PC32 __x86_indirect_thunk_r11-0x4
84: c3 retq
This is a conditional retpoline sibling call, which is now possible
thanks to retpolines. Objtool hasn't seen that before. It's
incorrectly interpreting the conditional jump as an unconditional
dynamic jump.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/30d4c758b267ef487fb97e6ecb2f148ad007b554.1563413318.git.jpoimboe@redhat.com
This fixes objtool for both a GCC issue and a Clang issue:
1) GCC issue:
kernel/bpf/core.o: warning: objtool: ___bpf_prog_run()+0x8d5: sibling call from callable instruction with modified stack frame
With CONFIG_RETPOLINE=n, GCC is doing the following optimization in
___bpf_prog_run().
Before:
select_insn:
jmp *jumptable(,%rax,8)
...
ALU64_ADD_X:
...
jmp select_insn
ALU_ADD_X:
...
jmp select_insn
After:
select_insn:
jmp *jumptable(, %rax, 8)
...
ALU64_ADD_X:
...
jmp *jumptable(, %rax, 8)
ALU_ADD_X:
...
jmp *jumptable(, %rax, 8)
This confuses objtool. It has never seen multiple indirect jump
sites which use the same jump table.
For GCC switch tables, the only way of detecting the size of a table
is by continuing to scan for more tables. The size of the previous
table can only be determined after another switch table is found, or
when the scan reaches the end of the function.
That logic was reused for C jump tables, and was based on the
assumption that each jump table only has a single jump site. The
above optimization breaks that assumption.
2) Clang issue:
drivers/usb/misc/sisusbvga/sisusb.o: warning: objtool: sisusb_write_mem_bulk()+0x588: can't find switch jump table
With clang 9, code can be generated where a function contains two
indirect jump instructions which use the same switch table.
The fix is the same for both issues: split the jump table parsing into
two passes.
In the first pass, locate the heads of all switch tables for the
function and mark their locations.
In the second pass, parse the switch tables and add them.
Fixes: e55a73251d ("bpf: Fix ORC unwinding in non-JIT BPF code")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/e995befaada9d4d8b2cf788ff3f566ba900d2b4d.1563413318.git.jpoimboe@redhat.com
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
If 'insn->func' is NULL, objtool skips some important checks, including
sibling call validation. So if some .fixup code does an invalid sibling
call, objtool ignores it.
Treat all code branches (including alts) as part of the original
function by keeping track of the original func value from
validate_functions().
This improves the usefulness of some clang function fallthrough
warnings, and exposes some additional kernel bugs in the process.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/505df630f33c9717e1ccde6e4b64c5303135c25f.1563413318.git.jpoimboe@redhat.com
After an objtool improvement, it's reporting that __memcpy_mcsafe() is
calling mcsafe_handle_tail() with AC=1:
arch/x86/lib/memcpy_64.o: warning: objtool: .fixup+0x13: call to mcsafe_handle_tail() with UACCESS enabled
arch/x86/lib/memcpy_64.o: warning: objtool: __memcpy_mcsafe()+0x34: (alt)
arch/x86/lib/memcpy_64.o: warning: objtool: __memcpy_mcsafe()+0xb: (branch)
arch/x86/lib/memcpy_64.o: warning: objtool: __memcpy_mcsafe()+0x0: <=== (func)
mcsafe_handle_tail() is basically an extension of __memcpy_mcsafe(), so
AC=1 is supposed to be set. Add mcsafe_handle_tail() to the uaccess
safe list.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/035c38f7eac845281d3c3d36749144982e06e58c.1563413318.git.jpoimboe@redhat.com
On x86-64, with CONFIG_RETPOLINE=n, GCC's "global common subexpression
elimination" optimization results in ___bpf_prog_run()'s jumptable code
changing from this:
select_insn:
jmp *jumptable(, %rax, 8)
...
ALU64_ADD_X:
...
jmp *jumptable(, %rax, 8)
ALU_ADD_X:
...
jmp *jumptable(, %rax, 8)
to this:
select_insn:
mov jumptable, %r12
jmp *(%r12, %rax, 8)
...
ALU64_ADD_X:
...
jmp *(%r12, %rax, 8)
ALU_ADD_X:
...
jmp *(%r12, %rax, 8)
The jumptable address is placed in a register once, at the beginning of
the function. The function execution can then go through multiple
indirect jumps which rely on that same register value. This has a few
issues:
1) Objtool isn't smart enough to be able to track such a register value
across multiple recursive indirect jumps through the jump table.
2) With CONFIG_RETPOLINE enabled, this optimization actually results in
a small slowdown. I measured a ~4.7% slowdown in the test_bpf
"tcpdump port 22" selftest.
This slowdown is actually predicted by the GCC manual:
Note: When compiling a program using computed gotos, a GCC
extension, you may get better run-time performance if you
disable the global common subexpression elimination pass by
adding -fno-gcse to the command line.
So just disable the optimization for this function.
Fixes: e55a73251d ("bpf: Fix ORC unwinding in non-JIT BPF code")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/30c3ca29ba037afcbd860a8672eef0021addf9fe.1563413318.git.jpoimboe@redhat.com
The same getuser/putuser error paths are used regardless of whether AC
is set. In non-exception failure cases, this results in an unnecessary
CLAC.
Fixes the following warnings:
arch/x86/lib/getuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
arch/x86/lib/putuser.o: warning: objtool: .altinstr_replacement+0x18: redundant UACCESS disable
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/bc14ded2755ae75bd9010c446079e113dbddb74b.1563413318.git.jpoimboe@redhat.com
After adding mcsafe_handle_tail() to the objtool uaccess safe list,
objtool reports:
arch/x86/lib/usercopy_64.o: warning: objtool: mcsafe_handle_tail()+0x0: call to __fentry__() with UACCESS enabled
With SMAP, this function is called with AC=1, so it needs to be careful
about which functions it calls. Disable the ftrace entry hook, which
can potentially pull in a lot of extra code.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/8e13d6f0da1c8a3f7603903da6cbf6d582bbfe10.1563413318.git.jpoimboe@redhat.com
