Currently, timeless mode starts the decode on PERF_RECORD_EXIT, and
non-timeless mode starts decoding on the fist PERF_RECORD_AUX record.
This can cause the "data has no samples!" error if the first
PERF_RECORD_AUX record comes before the first (or any relevant)
PERF_RECORD_MMAP2 record because the mmaps are required by the decoder
to access the binary data.
This change pushes the start of non-timeless decoding to the very end of
parsing the file. The PERF_RECORD_EXIT event can't be used because it
might not exist in system-wide or snapshot modes.
I have not been able to find the exact cause for the events to be
intermittently in the wrong order in the basic scenario:
perf record -e cs_etm/@tmc_etr0/u top
But it can be made to happen every time with the --delay option. This is
because "enable_on_exec" is disabled, which causes tracing to start
before the process to be launched is exec'd. For example:
perf record -e cs_etm/@tmc_etr0/u --delay=1 top
perf report -D | grep 'AUX\|MAP'
0 16714475632740 0x520 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x30 flags: 0 []
0 16714476494960 0x5d0 [0x40]: PERF_RECORD_AUX offset: 0x30 size: 0x30 flags: 0 []
0 16714478208900 0x660 [0x40]: PERF_RECORD_AUX offset: 0x60 size: 0x30 flags: 0 []
4294967295 16714478293340 0x700 [0x70]: PERF_RECORD_MMAP2 8712/8712: [0x557a460000(0x54000) @ 0 00:17 5329258 0]: r-xp /usr/bin/top
4294967295 16714478353020 0x770 [0x88]: PERF_RECORD_MMAP2 8712/8712: [0x7f86f72000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so
Another scenario in which decoding from the first aux record fails is a
workload that forks. Although the aux record comes after 'bash', it
comes before 'top', which is what we are interested in. For example:
perf record -e cs_etm/@tmc_etr0/u -- bash -c top
perf report -D | grep 'AUX\|MAP'
4294967295 16853946421300 0x510 [0x70]: PERF_RECORD_MMAP2 8723/8723: [0x558f280000(0x142000) @ 0 00:17 5213953 0]: r-xp /usr/bin/bash
4294967295 16853946543560 0x580 [0x88]: PERF_RECORD_MMAP2 8723/8723: [0x7fbba6e000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so
4294967295 16853946628420 0x608 [0x68]: PERF_RECORD_MMAP2 8723/8723: [0x7fbba9e000(0x1000) @ 0 00:00 0 0]: r-xp [vdso]
0 16853947067300 0x690 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x3a60 flags: 0 []
...
0 16853966602580 0x1758 [0x40]: PERF_RECORD_AUX offset: 0xc2470 size: 0x30 flags: 0 []
4294967295 16853967119860 0x1818 [0x70]: PERF_RECORD_MMAP2 8723/8723: [0x5559e70000(0x54000) @ 0 00:17 5329258 0]: r-xp /usr/bin/top
4294967295 16853967181620 0x1888 [0x88]: PERF_RECORD_MMAP2 8723/8723: [0x7f9ed06000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so
4294967295 16853967237180 0x1910 [0x68]: PERF_RECORD_MMAP2 8723/8723: [0x7f9ed36000(0x1000) @ 0 00:00 0 0]: r-xp [vdso]
A third scenario is when the majority of time is spent in a shared
library that is not loaded at startup. For example a dynamically loaded
plugin.
Testing
=======
Testing was done by checking if any samples that are present in the
old output are missing from the new output. Timestamps must be
stripped out with awk because now they are set to the last AUX sample,
rather than the first:
./perf script $4 | awk '!($4="")' > new.script
./perf-default script $4 | awk '!($4="")' > default.script
comm -13 <(sort -u new.script) <(sort -u default.script)
Testing showed that the new output is a superset of the old. When lines
appear in the comm output, it is not because they are missing but
because [unknown] is now resolved to sensible locations. For example
last putp branch here now resolves to libtinfo, so it's not missing
from the output, but is actually improved:
Old:
top 305 [001] 1 branches:uH: 402830 _init+0x30 (/usr/bin/top.procps) => 404a1c [unknown] (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 404a20 [unknown] (/usr/bin/top.procps) => 402970 putp@plt+0x0 (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 40297c putp@plt+0xc (/usr/bin/top.procps) => 0 [unknown] ([unknown])
New:
top 305 [001] 1 branches:uH: 402830 _init+0x30 (/usr/bin/top.procps) => 404a1c [unknown] (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 404a20 [unknown] (/usr/bin/top.procps) => 402970 putp@plt+0x0 (/usr/bin/top.procps)
top 305 [001] 1 branches:uH: 40297c putp@plt+0xc (/usr/bin/top.procps) => 7f8ab39208 putp+0x0 (/lib/libtinfo.so.5.9)
In the following two modes, decoding now works and the "data has no
samples!" error is not displayed any more:
perf record -e cs_etm/@tmc_etr0/u -- bash -c top
perf record -e cs_etm/@tmc_etr0/u --delay=1 top
In snapshot mode, there is also an improvement to decoding. Previously
samples for the 'kill' process that was used to send SIGUSR2 were
completely missing, because the process hadn't started yet. But now
there are additional samples present:
perf record -e cs_etm/@tmc_etr0/u --snapshot -a
perf script
stress 19380 [003] 161627.938153: 1000000 instructions:uH: aaaabb612fb4 [unknown] (/usr/bin/stress)
kill 19644 [000] 161627.938153: 1000000 instructions:uH: ffffae0ef210 [unknown] (/lib/aarch64-linux-gnu/ld-2.27.so)
stress 19380 [003] 161627.938153: 1000000 instructions:uH: ffff9e754d40 random_r+0x20 (/lib/aarch64-linux-gnu/libc-2.27.so)
Also tested was the round trip of 'perf inject' followed by 'perf
report' which has the same differences and improvements.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Branislav Rankov <branislav.rankov@arm.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210609130421.13934-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
59d21d67f3 ("KVM: SVM: Software reserved fields")
Picking the new SVM_EXIT_SW exit reasons.
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
f0376edb1d ("KVM: arm64: Add ioctl to fetch/store tags in a guest")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Marc Zyngier <maz@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
1348924ba8 ("x86/msr: Define new bits in TSX_FORCE_ABORT MSR")
cbcddaa33d ("perf/x86/rapl: Use CPUID bit on AMD and Hygon parts")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
dd8b477f9a ("mount: Support "nosymfollow" in new mount api")
That ends up adding support for the new MOUNT_ATTR_NOSYMFOLLOW mount
attribute:
$ tools/perf/trace/beauty/fsmount.sh > before
$ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
$ tools/perf/trace/beauty/fsmount.sh > after
$ diff -u before after
--- before 2021-07-01 13:34:04.542517355 -0300
+++ after 2021-07-01 13:34:12.423694537 -0300
@@ -7,4 +7,5 @@
[ilog2(0x00000020) + 1] = "STRICTATIME",
[ilog2(0x00000080) + 1] = "NODIRATIME",
[ilog2(0x00100000) + 1] = "IDMAP",
+ [ilog2(0x00200000) + 1] = "NOSYMFOLLOW",
};
$
So now one can use it in --filter expressions for tracepoints.
This silences this perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from these csets:
1348924ba8 ("x86/msr: Define new bits in TSX_FORCE_ABORT MSR")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Borislav Petkov <bp@suse.de>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callback cs_etm_find_snapshot() is invoked for snapshot mode, its
main purpose is to find the correct AUX trace data and returns "head"
and "old" (we can call "old" as "old head") to the caller, the caller
__auxtrace_mmap__read() uses these two pointers to decide the AUX trace
data size.
This patch removes cs_etm_find_snapshot() with below reasons:
- The first thing in cs_etm_find_snapshot() is to check if the head has
wrapped around, if it is not, directly bails out. The checking is
pointless, this is because the "head" and "old" pointers both are
monotonical increasing so they never wrap around.
- cs_etm_find_snapshot() adjusts the "head" and "old" pointers and
assumes the AUX ring buffer is fully filled with the hardware trace
data, so it always subtracts the difference "mm->len" from "head" to
get "old". Let's imagine the snapshot is taken in very short
interval, the tracers only fill a small chunk of the trace data into
the AUX ring buffer, in this case, it's wrongly to copy the whole the
AUX ring buffer to perf file.
- As the "head" and "old" pointers are monotonically increased, the
function __auxtrace_mmap__read() handles these two pointers properly.
It calculates the reminders for these two pointers, and the size is
clamped to be never more than "snapshot_size". We can simply reply on
the function __auxtrace_mmap__read() to calculate the correct result
for data copying, it's not necessary to add Arm CoreSight specific
callback.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Denis Nikitin <denik@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20210701093537.90759-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some helper functions will be used for cgroup counting too. Move them
to a header file for sharing.
Committer notes:
Fix the build on older systems with:
- struct bpf_map_info map_info = {0};
+ struct bpf_map_info map_info = { .id = 0, };
This wasn't breaking the build in such systems as bpf_counter.c isn't
built due to:
tools/perf/util/Build:
perf-$(CONFIG_PERF_BPF_SKEL) += bpf_counter.o
The bpf_counter.h file on the other hand is included from places that
are built everywhere.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210625071826.608504-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull misc fs updates from Jan Kara:
"The new quotactl_fd() syscall (remake of quotactl_path() syscall that
got introduced & disabled in 5.13 cycle), and couple of udf, reiserfs,
isofs, and writeback fixes and cleanups"
* tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
writeback: fix obtain a reference to a freeing memcg css
quota: remove unnecessary oom message
isofs: remove redundant continue statement
quota: Wire up quotactl_fd syscall
quota: Change quotactl_path() systcall to an fd-based one
reiserfs: Remove unneed check in reiserfs_write_full_page()
udf: Fix NULL pointer dereference in udf_symlink function
reiserfs: add check for invalid 1st journal block
Marek Behún says:
====================
dsa: mv88e6xxx: Topaz fixes
here comes some fixes for the Topaz family (Marvell 88E6141 / 88E6341)
which I found out about when I compared the Topaz' operations
structure with that one of Peridot (6390).
This is v2. In v1, I accidentally sent patches generated from wrong
branch and the 5th patch does not contain a necessary change in
serdes.c.
Changes from v1:
- the fifth patch, "enable SerDes RX stats for Topaz", needs another
change in serdes.c
- Andrew's Reviewed-by to 1,2,3,4 and 6
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit bf3504cea7 ("net: dsa: mv88e6xxx: Add 6390 family PCS
registers to ethtool -d") added support for dumping SerDes PCS registers
via ethtool -d for Peridot.
The same implementation is also valid for Topaz, but was not
enabled at the time.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: bf3504cea7 ("net: dsa: mv88e6xxx: Add 6390 family PCS registers to ethtool -d")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0df9528736 ("mv88e6xxx: Add serdes Rx statistics") added
support for RX statistics on SerDes ports for Peridot.
This same implementation is also valid for Topaz, but was not enabled
at the time.
We need to use the generic .serdes_get_lane() method instead of the
Peridot specific one in the stats methods so that on Topaz the proper
one is used.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 0df9528736 ("mv88e6xxx: Add serdes Rx statistics")
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 23e8b470c7 ("net: dsa: mv88e6xxx: Add devlink param for ATU
hash algorithm.") introduced ATU hash algorithm access via devlink, but
did not enable it for Topaz.
Enable this feature also for Topaz.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 23e8b470c7 ("net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 9e5baf9b36 ("net: dsa: mv88e6xxx: add RMU disable op")
introduced .rmu_disable() method with implementation for several models,
but forgot to add Topaz, which can use the Peridot implementation.
Use the Peridot implementation of .rmu_disable() on Topaz.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 9e5baf9b36 ("net: dsa: mv88e6xxx: add RMU disable op")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 40cff8fca9 ("net: dsa: mv88e6xxx: Fix stats histogram mode")
introduced wrong .stats_set_histogram() method for Topaz family.
The Peridot method should be used instead.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: 40cff8fca9 ("net: dsa: mv88e6xxx: Fix stats histogram mode")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f3a2cd326e ("net: dsa: mv88e6xxx: introduce .port_set_policy")
introduced .port_set_policy() method with implementation for several
models, but forgot to add Topaz, which can use the 6352 implementation.
Use the 6352 implementation of .port_set_policy() on Topaz.
Signed-off-by: Marek Behún <kabel@kernel.org>
Fixes: f3a2cd326e ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The doc draft-stewart-tsvwg-sctp-ipv4-00 that restricts 198 addresses
was never published. These addresses as private addresses should be
allowed to use in SCTP.
As Michael Tuexen suggested, this patch is to move 198 addresses from
unusable to private scope.
Reported-by: Sérgio <surkamp@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection
logic of the internal PHY to prevent the system from sleeping. Some
internal PHYs will report that energy is detected when the network
interface is closed which can prevent the system from going to sleep
if WoL is enabled when the interface is brought down.
Since the driver does not support waking the system on this logic,
this commit clears the bit whenever the internal PHY is powered up
and the other logic for manipulating the bit is removed since it
serves no useful function.
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DSA core has a layered structure, and even though we end up
returning 0 (success) to user space when setting a bonding/team upper
that can't be offloaded, some parts of the framework actually need to
know that we couldn't offload that.
For example, if dsa_switch_lag_join returns 0 as it currently does,
dsa_port_lag_join has no way to tell a successful offload from a
software fallback, and it will call dsa_port_bridge_join afterwards.
Then we'll think we're offloading the bridge master of the LAG, when in
fact we're not even offloading the LAG. In turn, this will make us set
skb->offload_fwd_mark = true, which is incorrect and the bridge doesn't
like it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya says:
====================
Dynamic LMTST region setup
This patch series allows RVU PF/VF to allocate memory for
LMTST operations instead of using memory reserved by firmware
which is mapped as device memory.
The LMTST mapping table contains the RVU PF/VF LMTST memory base
address entries. This table is used by hardware for LMTST operations.
Patch1 introduces new mailbox message to update the LMTST table with
the new allocated memory address.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The current driver uses static LMTST region allocated by firmware.
This memory gets populated as PF/VF BAR2. RVU PF/VF driver ioremap
the memory as device memory for NIX/NPA operation. Since the memory
is mapped as device memory we see performance degration. To address
this issue this patch implements runtime memory allocation.
RVU PF/VF allocates memory during device probe and share the base
address with RVU AF. RVU AF then configure the LMT MAP table
accordingly.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends the lmtst_tbl_setup_req mbox to support run time
LMTST configuration.
RVU PF/VF and DPDK/ODP allocates a LMT region, creates a translation
entry for a device via VFIO IOCTLs.
This IOVA is shared with AF through above mbox. AF then uses
RVU_SMMU transulation Widget and gets PA for the IOVA and updates
the LMTtable entry for that device.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introducing a new mailbox to support updating lmt entries
and common lmt base address scheme i.e. multiple pcifuncs
can share lmt region to reduce L1 cache pressure for application.
Parameters passed to mailbox includes the primary pcifunc
value whose lmt regions will be shared by other secondary
pcifuncs. Here secondary pcifunc will be the one who is
calling the mailbox.
For example:
By default each pcifunc has its own LMT base address:
PCIFUNC1 LMT_BASE_ADDR A
PCIFUNC2 LMT_BASE_ADDR B
PCIFUNC3 LMT_BASE_ADDR C
PCIFUNC4 LMT_BASE_ADDR D
Application will choose PCIFUNC1 as base/primary pcifunc
and as and when other pcifunc(secondary pcifuncs) gets
probed, this mailbox will be called and LMTST table will
be updated as:
PCIFUNC1 LMT_BASE_ADDR A
PCIFUNC2 LMT_BASE_ADDR A
PCIFUNC3 LMT_BASE_ADDR A
PCIFUNC4 LMT_BASE_ADDR A
On FLR lmtst map table gets resetted to the default lmt
base addresses for all secondary pcifuncs.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_ll_usec is read locklessly from sk_can_busy_loop()
while another thread can change its value in sock_setsockopt()
This is correct but needs annotations.
BUG: KCSAN: data-race in __skb_try_recv_datagram / sock_setsockopt
write to 0xffff88814eb5f904 of 4 bytes by task 14011 on cpu 0:
sock_setsockopt+0x1287/0x2090 net/core/sock.c:1175
__sys_setsockopt+0x14f/0x200 net/socket.c:2100
__do_sys_setsockopt net/socket.c:2115 [inline]
__se_sys_setsockopt net/socket.c:2112 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2112
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff88814eb5f904 of 4 bytes by task 14001 on cpu 1:
sk_can_busy_loop include/net/busy_poll.h:41 [inline]
__skb_try_recv_datagram+0x14f/0x320 net/core/datagram.c:273
unix_dgram_recvmsg+0x14c/0x870 net/unix/af_unix.c:2101
unix_seqpacket_recvmsg+0x5a/0x70 net/unix/af_unix.c:2067
____sys_recvmsg+0x15d/0x310 include/linux/uio.h:244
___sys_recvmsg net/socket.c:2598 [inline]
do_recvmmsg+0x35c/0x9f0 net/socket.c:2692
__sys_recvmmsg net/socket.c:2771 [inline]
__do_sys_recvmmsg net/socket.c:2794 [inline]
__se_sys_recvmmsg net/socket.c:2787 [inline]
__x64_sys_recvmmsg+0xcf/0x150 net/socket.c:2787
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000000 -> 0x00000101
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 14001 Comm: syz-executor.3 Not tainted 5.13.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently tgid_map is sized at PID_MAX_DEFAULT entries, which means that
on systems where pid_max is configured higher than PID_MAX_DEFAULT the
ftrace record-tgid option doesn't work so well. Any tasks with PIDs
higher than PID_MAX_DEFAULT are simply not recorded in tgid_map, and
don't show up in the saved_tgids file.
In particular since systemd v243 & above configure pid_max to its
highest possible 1<<22 value by default on 64 bit systems this renders
the record-tgids option of little use.
Increase the size of tgid_map to the configured pid_max instead,
allowing it to cover the full range of PIDs up to the maximum value of
PID_MAX_LIMIT if the system is configured that way.
On 64 bit systems with pid_max == PID_MAX_LIMIT this will increase the
size of tgid_map from 256KiB to 16MiB. Whilst this 64x increase in
memory overhead sounds significant 64 bit systems are presumably best
placed to accommodate it, and since tgid_map is only allocated when the
record-tgid option is actually used presumably the user would rather it
spends sufficient memory to actually record the tgids they expect.
The size of tgid_map could also increase for CONFIG_BASE_SMALL=y
configurations, but these seem unlikely to be systems upon which people
are both configuring a large pid_max and running ftrace with record-tgid
anyway.
Of note is that we only allocate tgid_map once, the first time that the
record-tgid option is enabled. Therefore its size is only set once, to
the value of pid_max at the time the record-tgid option is first
enabled. If a user increases pid_max after that point, the saved_tgids
file will not contain entries for any tasks with pids beyond the earlier
value of pid_max.
Link: https://lkml.kernel.org/r/20210701172407.889626-2-paulburton@google.com
Fixes: d914ba37d7 ("tracing: Add support for recording tgid of tasks")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Burton <paulburton@google.com>
[ Fixed comment coding style ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The "hbinfo" struct has a 4 byte hole at the end so we have to zero it
out to prevent stack information from being disclosed.
Fixes: fe59379b9a ("sctp: do the basic send and recv for PLPMTUD probe")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current implement when comparing two flow keys, we will return
result after comparing the whole key from start to end.
In our optimization, we will return result in the first none-zero
comparison, then we will improve the flow table looking up efficiency.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After probe/bind sequence is the PHY in active state, even if interface
is stopped. As result, on some systems like Samsung Exynos5250 SoC based Arndale
board, the ASIX PHY will be able to negotiate the link but fail to
transmit the data.
To handle it, suspend the PHY on probe.
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If semctl(), msgctl() and shmctl() are called with IPC_INFO, SEM_INFO,
MSG_INFO or SHM_INFO, then the return value is the index of the highest
used index in the kernel's internal array recording information about all
SysV objects of the requested type for the current namespace. (This
information can be used with repeated ..._STAT or ..._STAT_ANY operations
to obtain information about all SysV objects on the system.)
There is a cache for this value. But when the cache needs up be updated,
then the highest used index is determined by looping over all possible
values. With the introduction of IPCMNI_EXTEND_SHIFT, this could be a
loop over 16 million entries. And due to /proc/sys/kernel/*next_id, the
index values do not need to be consecutive.
With <write 16000000 to msg_next_id>, msgget(), msgctl(,IPC_RMID) in a
loop, I have observed a performance increase of around factor 13000.
As there is no get_last() function for idr structures: Implement a
"get_last()" using a binary search.
As far as I see, ipc is the only user that needs get_last(), thus
implement it in ipc/util.c and not in a central location.
[akpm@linux-foundation.org: tweak comment, fix typo]
Link: https://lkml.kernel.org/r/20210425075208.11777-2-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: <1vier1@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch solves three weaknesses in ipc/sem.c:
1) The initial read of use_global_lock in sem_lock() is an intentional
race. KCSAN detects these accesses and prints a warning.
2) The code assumes that plain C read/writes are not mangled by the CPU
or the compiler.
3) The comment it sysvipc_sem_proc_show() was hard to understand: The
rest of the comments in ipc/sem.c speaks about sem_perm.lock, and
suddenly this function speaks about ipc_lock_object().
To solve 1) and 2), use READ_ONCE()/WRITE_ONCE(). Plain C reads are used
in code that owns sma->sem_perm.lock.
The comment is updated to solve 3)
[manfred@colorfullife.com: use READ_ONCE()/WRITE_ONCE() for use_global_lock]
Link: https://lkml.kernel.org/r/20210627161919.3196-3-manfred@colorfullife.com
Link: https://lkml.kernel.org/r/20210514175319.12195-1-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: <1vier1@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On x86, there is a set of instructions used to save and restore register
state collectively known as the XSAVE architecture. There are about a
dozen different features managed with XSAVE. The protection keys
register, PKRU, is one of those features.
The hardware optimizes XSAVE by tracking when the state has not changed
from its initial (init) state. In this case, it can avoid the cost of
writing state to memory (it would usually just be a bunch of 0's).
When the pkey register is 0x0 the hardware optionally choose to track the
register as being in the init state (optimize away the writes). AMD CPUs
do this more aggressively compared to Intel.
On x86, PKRU is rarely in its (very permissive) init state. Instead, the
value defaults to something very restrictive. It is not surprising that
bugs have popped up in the rare cases when PKRU reaches its init state.
Add a protection key selftest which gets the protection keys register into
its init state in a way that should work on Intel and AMD. Then, do a
bunch of pkey register reads to watch for inadvertent changes.
This adds "-mxsave" to CFLAGS for all the x86 vm selftests in order to
allow use of the XSAVE instruction __builtin functions. This will make
the builtins available on all of the vm selftests, but is expected to be
harmless.
Link: https://lkml.kernel.org/r/20210611164202.1849B712@viggo.jf.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pkey test code keeps a "shadow" of the pkey register around. This
ensures that any bugs which might write to the register can be caught more
quickly.
Generally, userspace has a good idea when the kernel is going to write to
the register. For instance, alloc_pkey() is passed a permission mask.
The caller of alloc_pkey() can update the shadow based on the return value
and the mask.
But, the kernel can also modify the pkey register in a more sneaky way.
For mprotect(PROT_EXEC) mappings, the kernel will allocate a pkey and
write the pkey register to create an execute-only mapping. The kernel
never tells userspace what key it uses for this.
This can cause the test to fail with messages like:
protection_keys_64.2: pkey-helpers.h:132: _read_pkey_reg: Assertion `pkey_reg == shadow_pkey_reg' failed.
because the shadow was not updated with the new kernel-set value.
Forcibly update the shadow value immediately after an mprotect().
Link: https://lkml.kernel.org/r/20210611164200.EF76AB73@viggo.jf.intel.com
Fixes: 6af17cf89e ("x86/pkeys/selftests: Add PROT_EXEC test")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
