This reverts commit 9a9259a78c.
It seems schedtune_init_cgroups and schedtune_boostgroup_init
all call raw_spin_lock_init(&bg->lock), it is wrong.
Change-Id: Icbdfeaf81f4fb59fdcc02623ac5e26d41bd1e496
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
LSK 17.07 v4.4-android
* tag 'lsk-v4.4-17.07-android': (402 commits)
dt/vendor-prefixes: remove redundant vendor
Linux 4.4.77
saa7134: fix warm Medion 7134 EEPROM read
x86/mm/pat: Don't report PAT on CPUs that don't support it
ext4: check return value of kstrtoull correctly in reserved_clusters_store
staging: comedi: fix clean-up of comedi_class in comedi_init()
staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
tcp: fix tcp_mark_head_lost to check skb len before fragmenting
md: fix super_offset endianness in super_1_rdev_size_change
md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
perf tools: Use readdir() instead of deprecated readdir_r() again
perf tests: Remove wrong semicolon in while loop in CQM test
perf trace: Do not process PERF_RECORD_LOST twice
perf dwarf: Guard !x86_64 definitions under #ifdef else clause
perf pmu: Fix misleadingly indented assignment (whitespace)
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf tools: Remove duplicate const qualifier
perf script: Use readdir() instead of deprecated readdir_r()
perf thread_map: Use readdir() instead of deprecated readdir_r()
perf tools: Use readdir() instead of deprecated readdir_r()
...
Conflicts:
Makefile
drivers/Kconfig
drivers/Makefile
drivers/usb/dwc3/gadget.c
Change-Id: Ib4aae2e34ebbf0d7953c748a33f673acb3e744fc
commit 425fffd886 upstream.
Currently, inputting the following command will succeed but actually the
value will be truncated:
# echo 0x12ffffffff > /proc/sys/net/ipv4/tcp_notsent_lowat
This is not friendly to the user, so instead, we should report error
when the value is larger than UINT_MAX.
Fixes: e7d316a02f ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5380e5644a upstream.
I saw some very confusing sysctl output on my system:
# cat /proc/sys/net/core/xfrm_aevent_rseqth
-2
# cat /proc/sys/net/core/xfrm_aevent_etime
-10
# cat /proc/sys/net/ipv4/tcp_notsent_lowat
-4294967295
Because we forget to set the *negp flag in proc_douintvec, so it will
become a garbage value.
Since the value related to proc_douintvec is always an unsigned integer,
so we can set *negp to false explictily to fix this issue.
Fixes: e7d316a02f ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: e00ebdcb8a ("sched/tune: don't use schedtune before it is ready")
Change-Id: I86312b6d271365cfb94e6ca570771a6bca46e67b
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
LSK 17.06 v4.4-android
* tag 'lsk-v4.4-17.06-android': (134 commits)
ANDROID: sdcardfs: remove dead function open_flags_to_access_mode()
ANDROID: android-base.cfg: split out arm64-specific configs
usb: gadget: f_fs: Fix possibe deadlock
ANDROID: uid_sys_stats: check previous uid_entry before call find_or_register_uid
ANDROID: sdcardfs: d_splice_alias can return error values
android: base-cfg: disable CONFIG_NFS_FS and CONFIG_NFSD
schedstats/eas: guard properly to avoid breaking non-smp schedstats users
BACKPORT: f2fs: sanity check size of nat and sit cache
FROMLIST: f2fs: sanity check checkpoint segno and blkoff
sched/tune: don't use schedtune before it is ready
sched/fair: use SCHED_CAPACITY_SCALE for energy normalization
sched/{fair,tune}: use reciprocal_value to compute boost margin
sched/tune: Initialize raw_spin_lock in boosted_groups
sched/tune: report when SchedTune has not been initialized
sched/tune: fix sched_energy_diff tracepoint
sched/tune: increase group count to 5
cpufreq/schedutil: use boosted_cpu_util for PELT to match WALT
sched/fair: Fix sched_group_energy() to support per-cpu capacity states
sched/fair: discount task contribution to find CPU with lowest utilization
sched/fair: ensure utilization signals are synchronized before use
...
[ Upstream commit 0d0e57697f ]
The patch fixes two things at once:
1) It checks the env->allow_ptr_leaks and only prints the map address to
the log if we have the privileges to do so, otherwise it just dumps 0
as we would when kptr_restrict is enabled on %pK. Given the latter is
off by default and not every distro sets it, I don't want to rely on
this, hence the 0 by default for unprivileged.
2) Printing of ldimm64 in the verifier log is currently broken in that
we don't print the full immediate, but only the 32 bit part of the
first insn part for ldimm64. Thus, fix this up as well; it's okay to
access, since we verified all ldimm64 earlier already (including just
constants) through replace_map_fd_with_map_ptr().
Fixes: 1be7f75d16 ("bpf: enable non-root eBPF programs")
Fixes: cbd3570086 ("bpf: verifier (add ability to receive verification log)")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 62199770
Change-Id: I62ee47d06ddc669ba2863e8cf24f8f3e7683a461
commit 6e5f32f7a4 upstream.
If we crossed a sample window while in NO_HZ we will add LOAD_FREQ to
the pending sample window time on exit, setting the next update not
one window into the future, but two.
This situation on exiting NO_HZ is described by:
this_rq->calc_load_update < jiffies < calc_load_update
In this scenario, what we should be doing is:
this_rq->calc_load_update = calc_load_update [ next window ]
But what we actually do is:
this_rq->calc_load_update = calc_load_update + LOAD_FREQ [ next+1 window ]
This has the effect of delaying load average updates for potentially
up to ~9seconds.
This can result in huge spikes in the load average values due to
per-cpu uninterruptible task counts being out of sync when accumulated
across all CPUs.
It's safe to update the per-cpu active count if we wake between sample
windows because any load that we left in 'calc_load_idle' will have
been zero'd when the idle load was folded in calc_global_load().
This issue is easy to reproduce before,
commit 9d89c257df ("sched/fair: Rewrite runnable load and utilization average tracking")
just by forking short-lived process pipelines built from ps(1) and
grep(1) in a loop. I'm unable to reproduce the spikes after that
commit, but the bug still seems to be present from code review.
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: commit 5167e8d ("sched/nohz: Rewrite and fix load-avg computation -- again")
Link: http://lkml.kernel.org/r/20170217120731.11868-2-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ceea5e3771 upstream.
In tests, which excercise switching of clocksources, a NULL
pointer dereference can be observed on AMR64 platforms in the
clocksource read() function:
u64 clocksource_mmio_readl_down(struct clocksource *c)
{
return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask;
}
This is called from the core timekeeping code via:
cycle_now = tkr->read(tkr->clock);
tkr->read is the cached tkr->clock->read() function pointer.
When the clocksource is changed then tkr->clock and tkr->read
are updated sequentially. The code above results in a sequential
load operation of tkr->read and tkr->clock as well.
If the store to tkr->clock hits between the loads of tkr->read
and tkr->clock, then the old read() function is called with the
new clock pointer. As a consequence the read() function
dereferences a different data structure and the resulting 'reg'
pointer can point anywhere including NULL.
This problem was introduced when the timekeeping code was
switched over to use struct tk_read_base. Before that, it was
theoretically possible as well when the compiler decided to
reload clock in the code sequence:
now = tk->clock->read(tk->clock);
Add a helper function which avoids the issue by reading
tk_read_base->clock once into a local variable clk and then issue
the read function via clk->read(clk). This guarantees that the
read() function always gets the proper clocksource pointer handed
in.
Since there is now no use for the tkr.read pointer, this patch
also removes it, and to address stopping the fast timekeeper
during suspend/resume, it introduces a dummy clocksource to use
rather then just a dummy read function.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Daniel Mentz <danielmentz@google.com>
Link: http://lkml.kernel.org/r/1496965462-20003-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57db7e4a2d upstream.
Thomas Gleixner wrote:
> The CRIU support added a 'feature' which allows a user space task to send
> arbitrary (kernel) signals to itself. The changelog says:
>
> The kernel prevents sending of siginfo with positive si_code, because
> these codes are reserved for kernel. I think we can allow a task to
> send such a siginfo to itself. This operation should not be dangerous.
>
> Quite contrary to that claim, it turns out that it is outright dangerous
> for signals with info->si_code == SI_TIMER. The following code sequence in
> a user space task allows to crash the kernel:
>
> id = timer_create(CLOCK_XXX, ..... signo = SIGX);
> timer_set(id, ....);
> info->si_signo = SIGX;
> info->si_code = SI_TIMER:
> info->_sifields._timer._tid = id;
> info->_sifields._timer._sys_private = 2;
> rt_[tg]sigqueueinfo(..., SIGX, info);
> sigemptyset(&sigset);
> sigaddset(&sigset, SIGX);
> rt_sigtimedwait(sigset, info);
>
> For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this
> results in a kernel crash because sigwait() dequeues the signal and the
> dequeue code observes:
>
> info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0
>
> which triggers the following callchain:
>
> do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer()
>
> arm_timer() executes a list_add() on the timer, which is already armed via
> the timer_set() syscall. That's a double list add which corrupts the posix
> cpu timer list. As a consequence the kernel crashes on the next operation
> touching the posix cpu timer list.
>
> Posix clocks which are internally implemented based on hrtimers are not
> affected by this because hrtimer_start() can handle already armed timers
> nicely, but it's a reliable way to trigger the WARN_ON() in
> hrtimer_forward(), which complains about calling that function on an
> already armed timer.
This problem has existed since the posix timer code was merged into
2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to
inject not just a signal (which linux has supported since 1.0) but the
full siginfo of a signal.
The core problem is that the code will reschedule in response to
signals getting dequeued not just for signals the timers sent but
for other signals that happen to a si_code of SI_TIMER.
Avoid this confusion by testing to see if the queued signal was
preallocated as all timer signals are preallocated, and so far
only the timer code preallocates signals.
Move the check for if a timer needs to be rescheduled up into
collect_signal where the preallocation check must be performed,
and pass the result back to dequeue_signal where the code reschedules
timers. This makes it clear why the code cares about preallocated
timers.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reference: 66dd34ad31 ("signal: allow to send any siginfo to itself")
Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO")
Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff86bf0c65 upstream.
The alarmtimer code has another source of potentially rearming itself too
fast. Interval timers with a very samll interval have a similar CPU hog
effect as the previously fixed overflow issue.
The reason is that alarmtimers do not implement the normal protection
against this kind of problem which the other posix timer use:
timer expires -> queue signal -> deliver signal -> rearm timer
This scheme brings the rearming under scheduler control and prevents
permanently firing timers which hog the CPU.
Bringing this scheme to the alarm timer code is a major overhaul because it
lacks all the necessary mechanisms completely.
So for a quick fix limit the interval to one jiffie. This is not
problematic in practice as alarmtimers are usually backed by an RTC for
suspend which have 1 second resolution. It could be therefor argued that
the resolution of this clock should be set to 1 second in general, but
that's outside the scope of this fix.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kostya Serebryany <kcc@google.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/20170530211655.896767100@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4781e76f9 upstream.
Andrey reported a alartimer related RCU stall while fuzzing the kernel with
syzkaller.
The reason for this is an overflow in ktime_add() which brings the
resulting time into negative space and causes immediate expiry of the
timer. The following rearm with a small interval does not bring the timer
back into positive space due to the same issue.
This results in a permanent firing alarmtimer which hogs the CPU.
Use ktime_add_safe() instead which detects the overflow and clamps the
result to KTIME_SEC_MAX.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kostya Serebryany <kcc@google.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/20170530211655.802921648@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add appropriate #ifdef guards to ensure the smp-only easstats structs
are not used when smp is not enabled. Arnd got a report from buildbot,
analysed it, and pointed out exactly what the issue was.
Reported-by: "Arnd Bergmann" <arnd@arndb.de>
Suggested-by: "Arnd Bergmann" <arnd@arndb.de>
Fixes: 4b85765a3d ("sched/fair: Add eas (& cas)
specific rq, sd and task stats")
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Change-Id: I60554dea20137f6774db3f59b4afd40a06554cfc
When EAS is enabled during boot, we have to be careful not to use
schedtune from fair.c before it is ready or it will warn us and we'll
get a traceback in the console.
Change-Id: I1a5cf29b18af626545c636c51219f9ed497c19fa
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
sched_energy_diff tracepoint is in a place where it can never trace
payoff or nrg.delta. If CONFIG_SCHED_TUNE is enabled, put it in
a place where those values exist. If it is not enabled, trace from
the current location
Change-Id: Id5442f2b34ec76625491d27c0f4285433ca12699
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
We use 5 groups everywhere else, this should default to the same.
Change-Id: I05a20bdcf8046ea90a2e36979940cef11246e735
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
When using WALT we always used boosted cpu util for OPP selection.
This is the primary purpose for boosted cpu util, but we hadn't
changed the PELT utilization check to do the same thing.
Fix that here.
Change-Id: Id5ffb26eac23b25fe754255221f6d21b8cededfd
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
sched_group_energy() was supposed to support per-cpu capacity states
(DVFS), however, while fixing a hotplug issue this was broken as we bail
out if there is no SD_SHARE_CAP_STATES flag set.
This patch implements the hotplug race check differently and should
therefore reinstate support for per-cpu capacity states.
Change-Id: I5b865666c9ce833dcfa6514c574580d75aa0a195
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
In some cases, the new_util of a task can be the same on several
CPUs. This causes an issue because the target_util is only updated
if the current new_util is strictly smaller than target_util.
To fix that, the cpu_util_wake() return value is used alongside the
new_util value. If two CPUs compute the same new_util value,
we'll now also look at their cpu_util_wake() return value. In this
case, the CPU that last ran the task will be chosen in priority.
Change-Id: Ia1ea2c4b3ec39621372c2f748862317d5b497723
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
wake_cap performs task and cpu utilization synchronization which is
what allows us to subtract current task util from prev_cpu util and
have a sensible number to work with.
It looks as though if wake_wide returns 0, we could potentially not
execute wake_cap, which would result in unsynced signals we then use
for energy calculations.
This is not necessarily an issue we've seen in traces, but it looks
as though it should be changed.
Change-Id: Ic54a3cba2a10d946ea20113a04371dea04115e82
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
When we place a waking task with find_best_target, we calculate the
existing and new utilisation of each candidate cpu. However, we do
not remove any blocked load resulting from the waking task on the
previous cpu which might cause unnecessary migrations.
Switch to using cpu_util_wake which does this for us, which requires
moving cpu_util_wake a few functions earlier.
Also, we have multiple potential cpu utilization signals here, so
update the necessary bits to allow WALT to work properly (including
not subtracting task util for WALT).
When WALT is in use, cpu utilization is the utilization
in the previous completed window, whilst the task utilization
ignores fully idle windows. There seems to be no way to have a
decently accurate estimate of how much (if any) utilization from
this task remains on the prev cpu.
Instead, just return cpu_util when we're using WALT.
Change-Id: I448203ab98ffb5c020dfb6b218581eef1f5601f7
Reported-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
With the ability to choose between WALT and PELT for utilisation tracking
we can have the situation where we're using WALT to make all the
decisions and reporting PELT figures in the sched_load_avg_(cpu|task)
trace points. This is not too much of an issue, but when analysing trace
it is nice to see numbers representing what the scheduler is using rather
than needing to add in additional sched_walt_* traces to figure it out.
Add reporting for both types, and make the util_avg member reflect what
will be seen from cpu or task_util functions in the scheduler.
Change-Id: I2abbd2c5fa70822096d0f3372b4c12b1c6af1590
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
For Energy-Aware Scheduling (EAS) to work properly, even in the
case that there is only one cpu per cluster or that cpus are hot-plugged
out, the Energy Model (EM) data on all energy-aware sched domains (sd)
has to be present for all online cpus.
Mainline sd hierarchy setup code will remove sd's which are not useful
for task scheduling e.g. in the following situations:
1. Only 1 cpu is/remains in one cluster of a multi cluster system.
This remaining cpu only has DIE and no MC sd.
2. A complete cluster in a two cluster system is hot-plugged out.
The cpus of the remaining cluster only have MC and no DIE sd.
To make sure that all online cpus keep all their energy-aware sd's,
the sd degenerate functionality has been changed to not free a sd if
its first sched group (sg) contains EM data in case:
1. There is only 1 cpu left in the sd.
2. There have to be at least 2 sg's if certain sd flags are set.
Instead of freeing such a sd it now clears only its SD_LOAD_BALANCE
flag. This will make sure that the EAS functionality will always see
all energy-aware sd's for all online cpus.
It will introduce a tiny performance degradation for operations on
affected cpus since the hot-path macro for_each_domain() has to deal
with sd's not contributing to task scheduling at all now.
In most cases the exisiting code makes sure that task scheduling is not
invoked on a sd with !SD_LOAD_BALANCE.
However, a small change is necessary in update_sd_lb_stats() to make
sure that sd->parent is only initialized to !NULL in case the parent sd
contains more than 1 sg.
The handling of newidle decay values before the SD_LOAD_BALANCE check in
rebalance_domains() stays unchanged.
Test (w/ CONFIG_SCHED_DEBUG):
JUNO r0 default system:
$ cat /proc/cpuinfo | grep "^CPU part"
CPU part : 0xd03
CPU part : 0xd07
CPU part : 0xd07
CPU part : 0xd03
CPU part : 0xd03
CPU part : 0xd03
SD names and flags:
$ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name
MC
DIE
MC
DIE
MC
DIE
MC
DIE
MC
DIE
MC
DIE
$ printf "%x\n" `cat /proc/sys/kernel/sched_domain/cpu*/domain*/flags`
832f
102f
832f
102f
832f
102f
832f
102f
832f
102f
832f
102f
Test 1: Hotplug-out one A57 (CPU part 0xd07) cpu:
$ echo 0 > /sys/devices/system/cpu/cpu1/online
$ cat /proc/cpuinfo | grep "^CPU part"
CPU part : 0xd03
CPU part : 0xd07
CPU part : 0xd03
CPU part : 0xd03
CPU part : 0xd03
SD names and flags for remaining A57 (cpu2) cpu:
$ cat /proc/sys/kernel/sched_domain/cpu2/domain*/name
MC
DIE
$ printf "%x\n" `cat /proc/sys/kernel/sched_domain/cpu2/domain*/flags`
832e <-- MC SD with !SD_LOAD_BALANCE
102f
Test 2: Hotplug-out the entire A57 cluster:
$ echo 0 > /sys/devices/system/cpu/cpu1/online
$ echo 0 > /sys/devices/system/cpu/cpu2/online
$ cat /proc/cpuinfo | grep "^CPU part"
CPU part : 0xd03
CPU part : 0xd03
CPU part : 0xd03
CPU part : 0xd03
SD names and flags for the remaining A53 (CPU part 0xd03) cluster:
$ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name
MC
DIE
MC
DIE
MC
DIE
MC
DIE
$ printf "%x\n" `cat /proc/sys/kernel/sched_domain/cpu*/domain*/flags`
832f
102e <-- DIE SD with !SD_LOAD_BALANCE
832f
102e
832f
102e
832f
102e
Change-Id: If24aa2b2628f334abbf0207d39e2a86168d9d673
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
The update of the share of a cfs_rq is done when its load_avg is updated
but before the group_entity's load_avg has been updated for the past time
slot. This generates wrong load_avg accounting which can be significant
when small tasks are involved in the scheduling.
Let take the example of a task a that is dequeued of its task group A:
root
(cfs_rq)
\
(se)
A
(cfs_rq)
\
(se)
a
Task "a" was the only task in task group A which becomes idle when a is
dequeued.
We have the sequence:
- dequeue_entity a->se
- update_load_avg(a->se)
- dequeue_entity_load_avg(A->cfs_rq, a->se)
- update_cfs_shares(A->cfs_rq)
A->cfs_rq->load.weight == 0
A->se->load.weight is updated with the new share (0 in this case)
- dequeue_entity A->se
- update_load_avg(A->se) but its weight is now null so the last time
slot (up to a tick) will be accounted with a weight of 0 instead of
its real weight during the time slot. The last time slot will be
accounted as an idle one whereas it was a running one.
If the running time of task a is short enough that no tick happens when it
runs, all running time of group entity A->se will be accounted as idle
time.
Instead, we should update the share of a cfs_rq (in fact the weight of its
group entity) only after having updated the load_avg of the group_entity.
update_cfs_shares() now takes the sched_entity as a parameter instead of the
cfs_rq, and the weight of the group_entity is updated only once its load_avg
has been synced with current time.
Change-Id: Id6ce3be1767b44b444ce2a77ed1ba063e57c0664
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/1482335426-7664-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 89ee048f3c)
[minor cherry pick stuff]
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Commit:
fde7d22e01 ("sched/fair: Fix overly small weight for interactive group entities")
did something non-obvious but also did it buggy yet latent.
The problem was exposed for real by a later commit in the v4.7 merge window:
2159197d66 ("sched/core: Enable increased load resolution on 64-bit kernels")
... after which tg->load_avg and cfs_rq->load.weight had different
units (10 bit fixed point and 20 bit fixed point resp.).
Add a comment to explain the use of cfs_rq->load.weight over the
'natural' cfs_rq->avg.load_avg and add scale_load_down() to correct
for the difference in unit.
Since this is (now, as per a previous commit) the only user of
calc_tg_weight(), collapse it.
The effects of this bug should be randomly inconsistent SMP-balancing
of cgroups workloads.
Change-Id: If1e565662ea163485edd94a12aef644d0e0dfe7a
Reported-by: Jirka Hladky <jhladky@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2159197d66 ("sched/core: Enable increased load resolution on 64-bit kernels")
Fixes: fde7d22e01 ("sched/fair: Fix overly small weight for interactive group entities")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit ea1dc6fc62)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
A scheduler performance regression has been reported by Joseph Salisbury,
which he bisected back to:
3d30544f02 ("sched/fair: Apply more PELT fixes)
The regression triggers when several levels of task groups are involved
(read: SystemD) and cpu_possible_mask != cpu_present_mask.
The root cause is that group entity's load (tg_child->se[i]->avg.load_avg)
is initialized to scale_load_down(se->load.weight). During the creation of
a child task group, its group entities on possible CPUs are attached to
parent's cfs_rq (tg_parent) and their loads are added to the parent's load
(tg_parent->load_avg) with update_tg_load_avg().
But only the load on online CPUs will then be updated to reflect real load,
whereas load on other CPUs will stay at the initial value.
The result is a tg_parent->load_avg that is higher than the real load, the
weight of group entities (tg_parent->se[i]->load.weight) on online CPUs is
smaller than it should be, and the task group gets a less running time than
what it could expect.
( This situation can be detected with /proc/sched_debug. The ".tg_load_avg"
of the task group will be much higher than sum of ".tg_load_avg_contrib"
of online cfs_rqs of the task group. )
The load of group entities don't have to be intialized to something else
than 0 because their load will increase when an entity is attached.
Change-Id: Ie55021ff98ba49016adfddb2444e9c9709939226
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org> # 4.8.x
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: joonwoop@codeaurora.org
Fixes: 3d30544f02 ("sched/fair: Apply more PELT fixes)
Link: http://lkml.kernel.org/r/1476881123-10159-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit b5a9b34078)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Starting with the following commit:
fde7d22e01 ("sched/fair: Fix overly small weight for interactive group entities")
calc_tg_weight() doesn't compute the right value as expected by effective_load().
The difference is in the 'correction' term. In order to ensure \Sum
rw_j >= rw_i we cannot use tg->load_avg directly, since that might be
lagging a correction on the current cfs_rq->avg.load_avg value.
Therefore we use tg->load_avg - cfs_rq->tg_load_avg_contrib +
cfs_rq->avg.load_avg.
Now, per the referenced commit, calc_tg_weight() doesn't use
cfs_rq->avg.load_avg, as is later used in @w, but uses
cfs_rq->load.weight instead.
So stop using calc_tg_weight() and do it explicitly.
The effects of this bug are wake_affine() making randomly
poor choices in cgroup-intense workloads.
Change-Id: I1c0058ff674650cf295c8dc3b88a5a3de4bddab0
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # v4.3+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: fde7d22e01 ("sched/fair: Fix overly small weight for interactive group entities")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 7dd4912594)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Fix the insertion of cfs_rq in rq->leaf_cfs_rq_list to ensure that a
child will always be called before its parent.
The hierarchical order in shares update list has been introduced by
commit:
67e86250f8 ("sched: Introduce hierarchal order on shares update list")
With the current implementation a child can be still put after its
parent.
Lets take the example of:
root
\
b
/\
c d*
|
e*
with root -> b -> c already enqueued but not d -> e so the
leaf_cfs_rq_list looks like: head -> c -> b -> root -> tail
The branch d -> e will be added the first time that they are enqueued,
starting with e then d.
When e is added, its parents is not already on the list so e is put at
the tail : head -> c -> b -> root -> e -> tail
Then, d is added at the head because its parent is already on the
list: head -> d -> c -> b -> root -> e -> tail
e is not placed at the right position and will be called the last
whereas it should be called at the beginning.
Because it follows the bottom-up enqueue sequence, we are sure that we
will finished to add either a cfs_rq without parent or a cfs_rq with a
parent that is already on the list. We can use this event to detect
when we have finished to add a new branch. For the others, whose
parents are not already added, we have to ensure that they will be
added after their children that have just been inserted the steps
before, and after any potential parents that are already in the list.
The easiest way is to put the cfs_rq just after the last inserted one
and to keep track of it untl the branch is fully added.
Change-Id: I4fe0b8502ea628c13d14e8e5c5279bce67fb8845
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: kernellwp@gmail.com
Cc: pjt@google.com
Cc: yuyang.du@intel.com
Link: http://lkml.kernel.org/r/1478598827-32372-3-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 9c2791f936)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Vincent noted that the update_tg_load_avg() usage in commit:
3d30544f02 ("sched/fair: Apply more PELT fixes")
isn't entirely sufficient. We need to call this function every time
cfs_rq->avg.load changes, this includes when update_cfs_rq_load_avg()
returns true, but {attach,detach}_entity_load_avg() themselves also
change it. This means we need to unconditionally call
update_tg_load_avg().
Also, add more comments.
Change-Id: I7e55fceb587601f73c760c8b0d47a7ef2b777b9e
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 7c3edd2c30)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
One additional 'rule' for using update_cfs_rq_load_avg() is that one
should call update_tg_load_avg() if it returns true.
Add a bunch of comments to hopefully clarify some of the rules:
o You need to update cfs_rq _before_ any entity attach/detach,
this is important, because while for mathmatical consisency this
isn't strictly needed, it is required for the physical
interpretation of the model, you attach/detach _now_.
o When you modify the cfs_rq avg, you have to then call
update_tg_load_avg() in order to propagate changes upwards.
o (Fair) entities are always attached, switched_{to,from}_fair()
deal with !fair. This directly follows from the definition of the
cfs_rq averages, namely that they are a direct sum of all
(runnable or blocked) entities on that rq.
It is the second rule that this patch enforces, but it adds comments
pertaining to all of them.
Change-Id: Icdc906e98c67b84cb9582c893bc761a9886be57a
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 3d30544f02)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
