PD#SWPL-3081
Problem:
1,lack suspend/resume function
2,lack reset pin control
Solution:
1,add suspend/resume function
2, add reset pin control
Verify:
962x2
Signed-off-by: Che Song <che.song@amlogic.com>
Change-Id: I1cb920fdba4ad32048518fdad93e3a5a81039dd9
PD#SWPL-4387
Problem:
system would reboot when carshed by hw resample
Solution:
actrl of toddr is modified to null pointer, so it leads to crash.
fix to pass toddr pointer to function, not fetched by resample module.
Verify:
x301
Change-Id: I91c30260ee825d843e8ed17304031382b42ac119
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-1738
Problem:
support frame crc32 check and dump yuv.
Solution:
support frame check and yuv dump in media_module, add interface
to get canvas width/height.
Verify:
u212
Change-Id: Ieadc95521c4a21bec5685f8c8926d3bb2f92637b
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
PD#SWPL-5002
Problem:
TL1 need to support defendkey secure upgrade check
Solution:
1.modify the way of get random
Verify:
TL1 skt board verify pass
Change-Id: I76b29800de787c5e5b18e023d84c1161c9b1643a
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-4551
Problem:
ImagePlayer cannot play picture
Solution:
add picdec dev node for u200 u211 u212 w400
Verify:
franklin
Change-Id: I35cc28e2ab06367f33a7326ce671b1ee461e6fb1
Signed-off-by: xi an <an.xi@amlogic.com>
PD#SWPL-4653
Problem:
optimize the S905Y2 power consumption
Solution:
limit CPU and GPU frequency, reduce hdmi tx consumption
Verify:
test pass on u221
Change-Id: I1d95068f8beb5616c9aeea91122b5233e479db8b
Signed-off-by: huijie.huang <huijie.huang@amlogic.com>
PD#SWPL-5836
Problem:
kernel panic when read cec reg
Solution:
remove func that might cause sleep in spinlock,
so as to avoid deadlock
Verify:
S805X-P241
Change-Id: I8394f69bdbeff6673c795a221c08ef76164c5bdb
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-6186
Problem:
add usb power control
Solution:
add usb power control
Verify:
sm1
Test: pass
Change-Id: I6c2822105ae02f955e56dc4d64163e8e14a7e329
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
PD#SWPL-4597
Problem:
Probabilistic full-screen display mosaic after seek 8K H265
Solution:
alloc mem area with the cached which from the vmap. this way
can improve the efficiency of I/O.
Change-Id: Icf18b9cd57bdc54f832aa827a535399939b28611
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#172483
Problem:
To avoid A73 core speculative data loading from protected
memory, which triggers SError fault, the mapping of the
protected region should be cleared. In codec_mm driver, the
page structure pointer used to clear the mapping is wrong.
Although the memory is allocated from CMA, because we are
using CMA_res mode the address from CMA_res_pool is actually
a physical address, similar as reserved memory case. As a
result, the mapping to protected address is not cleared.
Solution:
1.Add "mem->from_flags ==
AMPORTS_MEM_FLAGS_FROM_GET_FROM_CMA_RES" case processing.
Verify:
Run YTTV and there is no SError crash after the fix.
Change-Id: Ia912337c1d7d5a55800fc55ad1d61016f9710f4d
Signed-off-by: Kai Song <kai.song@amlogic.com>
PD#SWPL-4582
Problem:
g12b revb osd blend shift issue still exist
when dv and hdr enable/disable
Solution:
used line_n_int to trigger osd, dv and hdr rdma,
this workaround can fix shift issue
Verify:
verify by g12b revb
Change-Id: Ie9747b2f7aaa3a7997245f82d15831c4c3da41cf
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-3318
Problem:
Android P not support dolby vision on t962x
Solution:
Porting code support dolby vision
Verify:
t962x/r311
Change-Id: I85afd05d2cb21a7105ea345f07e7e581bba5e927
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#SWPL-3951
Problem:
buffer malloc for dtb may failed
Solution:
malloc may sleep to wait for enough memory
Verify:
pass on p212
Change-Id: Ib4c266c17140d2a6abf2aea6c02b2ff591f0fe08
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#SWPL-85
Problem:
print into level control
Solution:
print into level control
Verify:
U212
Change-Id: Ib0fdc02f26e75c20e48171bca5ebef072947d78c
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
PD#TV-2802
Problem:
The image is stuck or blackscrean for a few seconds
when the DTV stream is replayed.
Solution:
when audio pts and video pts discontinue, then
adjust the pcr source clock.
Verify:
X301
Change-Id: Id0a74e2d4106a30b426bfa7a4faa70451db9b79e
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#SWPL-4551
Problem:
ImagePlayer cannot play picture
Solution:
add picdec dev node for u200 u211 u212 w400
Verify:
franklin
Change-Id: I35cc28e2ab06367f33a7326ce671b1ee461e6fb1
Signed-off-by: xi an <an.xi@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-6896
Problem:
In the HF1-31 Iter 03 test, the Rx EDID's max tmds clock is 600MHz,
and it doesn't claim that it supports Y420 modes. But
echo 2160p60hz,420,8bit > /sys/class/amhdmitx/amhdmitx0/valid_mode
'cat valid_mode' will get 1.
Solution:
Add Y420 8bit check
Verify:
G12/U212
Change-Id: I0a128eb33aeb2b4bcbf253eff49e9c5186386af1
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-6694
Problem:
home button has no function in sm1-ac200
Solution:
add home button configuration in dst node
Verify:
test pass on sm1-ac200
Change-Id: I670480c6dfd7f833e737adaddbe5981d84091203
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
PD#OTT-2452
Problem:
Black screen in the middle of the cut.
Solution:
add keep last frame.
Verify:
on U212
Change-Id: Ib24f066e0682c7427024a74d9bf8cc9b8a310d62
Signed-off-by: renjiang.han <renjiang.han@amlogic.com>
PD#SWPL-3730
Problem:
playback not smooth
Solution:
if p2 lookup fail, set p2 = p
Verify:
verified by x301
Change-Id: I181eae2ba40edd937df12e0925c2a55c856162ba
Signed-off-by: rongrong zhou <rongrong.zhou@amlogic.com>
PD#SWPL-6200
Problem:
emmc calibration delay set error.
Solution:
modify delay_step to 250ps.
Verify:
verify by s912.
Change-Id: I1c0e31ae6bdda8b0f105e12f3efc81b5474376d6
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#SWPL-5404
Problem:
emmc report data crc error in hs200 busmode
Solution:
set hs200 co_phase to 2 and did not reset the
hs200 co_phase and tx_phase when adjust tuning is
find the error point in sm1
Verify:
verify pass on sm1_s905d3_ac200
Change-Id: I56aa8eb666fb55641db75878a3488f66c721bd6d
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
PD#SWPL-5404
Problem:
sm1 usb fixdiv mode set adjust cause error
Solution:
disable emmc calc_f in dtsi.
Verify:
test pass on sm1 ac200
Change-Id: I4459bf4faa2141a9e684b1e5bb95fb806eecbbfa
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
PD#SWPL-2634
Problem:
eyetest mode is a little unstable
Solution:
adjust the tuning mode of the fixed adj
Verify:
R311
Change-Id: I6112e0078bf013d2a4cfe4ff04210f1d15e3439d
Signed-off-by: long yu <long.yu@amlogic.com>
PD#SWPL-6810
Problem:
android version, no sound for spk
ad82584 is mute in default.
Solution:
un-mute ad82584, and add delay for de-pop
Verify:
ac200
Change-Id: Id78eb77b5e1a0ebed0a16a9b97992c6a07f78cde
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
PD#SWPL-3750
Problem:
when debug on, too more log
Solution:
delete
Verify:
verified on android p
Change-Id: Iabaaa4fa205da5453a303c98bce8b71b55c5f77b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#SWPL-5292
Problem:
g12b-revB, some u disk amldevread test failed.
Solution:
Changing the register 0x54 to 0x2a, enabled the hs rx idle noise filter,
and the abnormal u-disk has no problem in the amldevread test.
Verify:
g12b revB
Change-Id: Ibbf924c93d193d7e40c4d8121a4616a8d1caeaaa
Signed-off-by: he.he <he.he@amlogic.com>
PD#SWPL-6169
Problem:
when resuming and playing hdr films, flash screen will happen
under LG TV
Solution:
quantization range has changed between UI and playing hdr
films. we keep quantization unchanged. Same as MTK.
Verify:
s905x2
Change-Id: I071abecfba705dbd44d33c2673d4938c39f419cf
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#TV-1361
Problem:
Add scene change detection for DM (read part),
start from TL1 by VLSI(Zheng.Bao).
Solution:
1. add control in function noise_meter_process;
2. add debug information:
cat /sys/class/deinterlace/di0/nr4_param
3. set NR2_CUE_MODE[11:10] as 3; (by feijun)
Verify:
tl1
Change-Id: Ib34d1b403539ba5fe5135d6608bfa2cf27490826
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
