Add support to detect USB flash drives and create the /dev/sd* devices.
Also add support for vfat to support USB drives formatted as FAT32.
This support will be used to enable firmware updates via USB flash
drives where the firmware image is stored in the USB drive and it's
plugged into the BMC USB port.
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Tested-by: Adriana Kobylak <anoo@us.ibm.com>
Link: https://lore.kernel.org/r/20211112202931.2379145-1-anoo@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Qualcomm ARM defconfig updates for 6.1
This enables command-db, ocmem, rpmh and rpmhpd drivers in the
multi_v7_defconfig, used on SDX55, SDX65 and MSM8974. For qcom_defconfig
rmtfs-mem, rpmpd, socinfo and qcom-stats are enables as they are used
across MSM8974, MSM8226, MSM8916 and APQ8084.
Lastly the MAINTAINERS entry is updated to include the qcom_defconfig.
* tag 'qcom-defconfig-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom: include defconfig in MAINTAINERS
ARM: multi_v7_defconfig: enable more Qualcomm drivers
ARM: qcom_defconfig: enable more Qualcomm drivers
Link: https://lore.kernel.org/r/20220921153734.1314952-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Default configuration changes for v6.1-rc1
Enables the new MGBE driver, as well as the existing SPI and QSPI
drivers on 64-bit ARM. The GPC DMA driver is now also built into the
kernel by default to avoid needless probe deferrals that would slow
down the boot process significantly.
* tag 'tegra-for-6.1-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Make TEGRA186_GPC_DMA built-in
arm64: tegra: Enable Tegra SPI & QSPI in deconfig
arm64: defconfig: Enable Tegra MGBE driver
Link: https://lore.kernel.org/r/20220916101957.1635854-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64 defconfig changes for 6.1,
please pull the following:
- William completes the removal of ARCH_BCM4908 by removing that Kconfig
entry from the defconfig since it is being deleted after having been
transitional through 6.0
* tag 'arm-soc/for-6.1/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: remove BCM4908
Link: https://lore.kernel.org/r/20220915023044.2350782-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Make TEGRA186_GPC_DMA driver as built-in since the clients using the
DMA (like I2C_TEGRA etc) are built-in. This would avoid the potential
long delay probe deferral can cause.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit 566e373fe0 ("arm64: Kconfig.platforms: Group NXP platforms
together") introduced a new symbol ARCH_NXP and made ARCH_LAYERSCAPE
(among others) depend on it, but didn't enable it in the defconfig.
Thus, now the defconfig doesn't include support for any NXP
architectures anymore. Fix it.
Fixes: 566e373fe0 ("arm64: Kconfig.platforms: Group NXP platforms together")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 96796c914b ("arm64: Kconfig.platforms: Re-organized Broadcom
menu") introduced a new symbol ARCH_BCM and made all of the Broadcom
SoCs Kconfig depend on it, but did not enable it in the defconfig.
Thus, now the defconfig doesn't include support for any Broadcom
architectures anymore. Fix it.
Fixes: 96796c914b ("arm64: Kconfig.platforms: Re-organized Broadcom menu")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220906033957.4377-1-f.fainelli@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the driver for the Multi-Gigabit Ethernet (MGBE) controller which
can be found on NVIDIA Tegra234 SoCs.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In the commit 617d32938d ("rpmsg: Move the rpmsg control device
from rpmsg_char to rpmsg_ctrl"), we split the rpmsg_char driver in two.
By default give everyone who had the old driver enabled the rpmsg_ctrl
driver too.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the commit 617d32938d ("rpmsg: Move the rpmsg control device
from rpmsg_char to rpmsg_ctrl"), we split the rpmsg_char driver in two.
By default give everyone who had the old driver enabled the rpmsg_ctrl
driver too.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM defconfig updates for v6.1
- Refresh shmobile_defconfig for v6.0-rc1,
- Enable additional support for Renesas platforms in the arm64
defconfig.
* tag 'renesas-arm-defconfig-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
ARM: shmobile: defconfig: Refresh for v6.0-rc1
Link: https://lore.kernel.org/r/cover.1662111126.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 788961462f ("ARM: psci: cpuidle: Enable PSCI CPUidle
driver") the generic ARM cpuidle driver probe no longer worked on
ARM64. It was however left enabled with the driver failing to probe
successfully. However the commit 51280acad8 ("cpuidle: cpuidle-arm:
remove arm64 support") removed the Kconfig option so that it is no
longer enabled for arm64 platforms.
Drop the disabled/unavailable ARM_CPUIDLE from the defconfig.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220822121604.2213778-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I have continued the cleanup of the multi_*_defconfig files, and
reordered the other files according to the 'make savedefconfig'
output as before.
Since a third of the defconfig files are for machines that
are now marked as unused, I skipped those files. There are still
a few things that get removed by 'make savedefconfig' as they
now get selected by some driver:
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SND_AUDIO_GRAPH_CARD=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_TEGRA20_APB_DMA=y
I think for those we should follow up with patches to remove the
'select' statements.
* arm/defconfig-cleanup:
ARM: defconfig: fix CONFIG_SND_SOC_AC97_CODEC name
ARM: defconfig: drop CONFIG_MICROCHIP_PIT64B
ARM: defconfig: drop CONFIG_USB_FSL_USB2
ARM: defconfig: drop CONFIG_SND_SOC_FSL_SAI
ARM: defconfig: drop CONFIG_PTP_1588_CLOCK=y
ARM: defconfig: drop CONFIG_DRM_RCAR_LVDS
ARM: defconfig: drop CONFIG_SERIAL_OMAP references
ARM: defconfig: drop CONFIG_NET_VENDOR_ASIX=y
ARM: defconfig: clean up multi_v4t and multi_v5 configs
ARM: defconfig: reorder defconfig files
The CONFIG_SND_SOC_AC97 symbol was recently enabled but does not
actually exist. From the patch description, I assume that this
was meant to be CONFIG_SND_SOC_AC97_CODEC, which is used in
imx_v6_v7_defconfig.
Fixes: 2cc1cd26e9 ("ARM: configs: Enable ASoC AC'97 glue")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is now default-enabled when CONFIG_SOC_SAMA7 is
used, so the defconfig entry can be dropped.
Fixes: f611af4c3b ("ARM: at91: Kconfig: implement PIT64B selection")
Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
USB_FSL_USB2 is no longer available for Arm platforms and
was replaced by the chipidea driver.
Fixes: a390bef7db ("usb: gadget: fsl_mxc_udc: Remove the driver")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is selected by CONFIG_SND_SOC_FSL_ASOC_CARD=m, so the
extra line is redundant.
Fixes: 212e3b6b87 ("ARM: configs: Enable more audio support for i.MX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PTP support is now enabled by default for configurations with
ethernet support, so drop the redundant entries in defconfig
files.
Fixes: e5f3155267 ("ethernet: fix PTP_1588_CLOCK dependencies")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is now a hidden symbol, so just drop the defconfig line.
Fixes: 42d95d1b3a ("drm/rcar: stop using 'imply' for dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver is mutually exclusive with the new 8250_OMAP
driver, so 'make defconfig' turns it off already. Drop
the reference now.
Fixes: 077e1cde78 ("ARM: omap2plus_defconfig: Enable 8250_OMAP")
Fixes: f98d45145e ("ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This option is 'default y' and has always been this way, the
line was added in error.
Fixes: dfe21dcaba ("ARM: defconfig: Enable ax88796c driver for Exynos boards")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Integrator now selects the regulators and versatile selects the
reset driver, so the correspondig options can be dropped from
the defconfig files.
Fixes: d2854bbe5f ("ARM: integrator: Add some Kconfig selections")
Fixes: 1c6e288da6 ("ARM: versatile: move restart to the device tree")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The debug-info and can subystem options have moved around in the
'savedefconfig' output, so fix these up to reduce the clutter
from the savedefconfig command.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Refresh the defconfig for Renesas ARM systems:
- Enable RZ/N1 A5PSW Ethernet switch support incl. dependencies
(RZN1D-DB),
- Move CONFIG_CAN_RCAR=y (moved in commit d7786af598 ("net:
Kconfig: move the CAN device menu to the "Device Drivers"
section")),
- Enable RZ/N1 Gigabit Ethernet MAC support (RZN1D-DB),
- Enable RZ/N1 Pin control support (RZN1D-DB),
- Enable RZ/N1 DMA support incl. dependencies (RZN1D-DB).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/428755447c1abbc8f1f08a63e83353d23ab22dd6.1661154821.git.geert+renesas@glider.be
Pull more hotfixes from Andrew Morton:
"Seventeen hotfixes. Mostly memory management things.
Ten patches are cc:stable, addressing pre-6.0 issues"
* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
.mailmap: update Luca Ceresoli's e-mail address
mm/mprotect: only reference swap pfn page if type match
squashfs: don't call kmalloc in decompressors
mm/damon/dbgfs: avoid duplicate context directory creation
mailmap: update email address for Colin King
asm-generic: sections: refactor memory_intersects
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
Revert "memcg: cleanup racy sum avoidance code"
mm/zsmalloc: do not attempt to free IS_ERR handle
binder_alloc: add missing mmap_lock calls when using the VMA
mm: re-allow pinning of zero pfns (again)
vmcoreinfo: add kallsyms_num_syms symbol
mailmap: update Guilherme G. Piccoli's email addresses
writeback: avoid use-after-free after removing device
shmem: update folio if shmem_replace_page() updates the page
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
Pull bitmap fixes from Yury Norov:
"Fix the reported issues, and implements the suggested improvements,
for the version of the cpumask tests [1] that was merged with commit
c41e8866c2 ("lib/test: introduce cpumask KUnit test suite").
These changes include fixes for the tests, and better alignment with
the KUnit style guidelines"
* tag 'bitmap-6.0-rc3' of github.com:/norov/linux:
lib/cpumask_kunit: add tests file to MAINTAINERS
lib/cpumask_kunit: log mask contents
lib/test_cpumask: follow KUnit style guidelines
lib/test_cpumask: fix cpu_possible_mask last test
lib/test_cpumask: drop cpu_possible_mask full test
