mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-09 20:32:04 +09:00
4.9.162-21
9207 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
riqun.ou
|
59e7a359e7 |
sound: add resample node for axg_s420_v03gva.dts [1/1]
PD#SWPL-365 Problem: System can't use resample function on GVA project. Solution: Add resample node in axg_s420_v03gva.dts Verify: Passed on s420 Change-Id: Ie48c579e9e9f6e1d61147f5410c95e5bca55b0a7 Signed-off-by: riqun.ou <riqun.ou@amlogic.com> audio: codecs: fix TL1 reference board volume too small [2/2] PD#SWPL-2652 Problem: X301/T309 AMP volume configured to small Solution: change the default external AMP codec mixer name to a match the ini parsing function in audio hal. TODO: need dynamically check the different codec mixer name in ini file. Verify: verify by x301 Change-Id: Iba835d37ea02bec3095556d54fbf327bd6390904 Signed-off-by: Jian Xu <jian.xu@amlogic.com> audio: codec: the DAC gain set of acodec not work [1/1] PD#SWPL-3134 Problem: the DAC gain set is not work Solution: update and aml_codec_tl1_acodec.c, change the method of getting codec pointer from kcontrol pointer. Verify: verify by T962x2_X301 board Change-Id: I02f02b73fab3b8391ef4866a71ffaf0d48bbbbbf Signed-off-by: Shuyu Li <shuyu.li@amlogic.com> audio: add tas5805 [1/1] PD#SWPL-3081 Problem: compatiable tas5805 module Solution: add tas5805 drivers Verify: T962X2 Change-Id: I3608e47fe768af0f924751a8bcc103389d0811de Signed-off-by: Yonghao Jiao <yonghao.jiao@amlogic.com> audio: auge: add HDMIRX SPDIF in support [1/2] PD#SWPL-2956 Problem: HDMI in DTS/Dolby input has noise when treated to LPCM Solution: By default,we are using PAO mode for HDMIRX,but we have not enabled the PaPb search for 61937 raw data input, after add that, we can detect the raw data, but it can not by clear when switch from NONE-LPCM to NONE-LPCM, need add IRQ function to clear that by sw.we enabled spdif in from HDMIRX, which is the same design as txl/txlx.we can get the Pc information now. also we add a new interface to set spdif in source when hdmirx input. Verify: x301 Change-Id: I3c4e8b387308ef862a069c29d15b8b5a9e865564 Signed-off-by: Jian Xu <jian.xu@amlogic.com> udio: auge: tl1 acodec mapping to data 1 [1/2] PD#SWPL-3277 Problem: tl1 internal codec volume can by adjusted Solution: configure the acodec data layout mapping to a fixed volume Verify: x301 Change-Id: I14d3762b39a0a5291722ef5489026f10fc960120 Signed-off-by: Jian Xu <jian.xu@amlogic.com> Conflicts: arch/arm/boot/dts/amlogic/tl1_t962x2_t309.dts audio: Fix TDM not wokring on HDMI I2S in [1/1] PD#SWPL-2887 Problem: When TDM is used for HDMI I2S in, the solt set is wrong. Solution: Fix the lane max value from 3 to 4 Verify: A113 Change-Id: I33f5ca21bf1e2407d83fa5d0f22e21f7b1f5e749 Signed-off-by: yujie.wu <yujie.wu@amlogic.com> audio: codec: fix to resume ad82584's volume after suspend [1/1] PD#SWPL-3456 Problem: 1) After suspend, volume is not resume 2) ARC connected, still sound out from spk Solution: 1) save channel volume when suspend, then resume the volume 2) add mute mixer control for ad82584 Verify: x301 Change-Id: Ic6e7502e3f9689cc2d1053295f26aaf4d5be2603 Signed-off-by: Xing Wang <xing.wang@amlogic.com> audio: auge: add vad driver [1/1] PD#SWPL-2404 Problem: VAD for wake up Solution: Add vad driver to fetch VAD buffer and ALSA buffer, in userspace, they will be combined for wakeup engine Verify: x301 Change-Id: I3b4de5fdfe173ce18e58a187a3adeda601e226b3 Signed-off-by: Xing Wang <xing.wang@amlogic.com> audio: fix pop snd after bootup [2/2] PD#SWPL-3178 Problem: output big pop noise after system boot up. Solution: Add zero and then unmute the stream. NOTICE: user should unmute the AD82584F after boot. Verify: local verified. Change-Id: I21555318f9347c5340a28f7e5cf0e3e2cde849a0 Signed-off-by: Shuai Li <shuai.li@amlogic.com> audio: fix no audio after resume of ad82584f [1/1] PD#SWPL-4090 Problem: No audio after suspend and resume. Suspend won't save the mute value, and after resume, it could not be restored. Solution: Add a mute val to save when suspend, and after resume, restore the mute value. Verify: Verified by QA. Change-Id: Ie24bb11f5c565048391846a66b5d12bab1d55666 Signed-off-by: Shuai Li <shuai.li@amlogic.com> audio: auge: fix sharebuffer channel map [1/1] PD#SWPL-2645 Problem: play ddp source, then play pcm source, no sound Solution: 1. fix same source control and channel map issue 2. i2s 8ch, spdif 2ch, channels are not mapped, make spdif 8 channel mask 3. when same source used, keep mpll use same mpll Verify: x301 Change-Id: I2fe4bbcbcbfff0a1c1a6cebf61d1da5aba9b7a9d Signed-off-by: Xing Wang <xing.wang@amlogic.com> Conflicts: arch/arm64/boot/dts/amlogic/tl1_t962x2_t309.dts arch/arm64/boot/dts/amlogic/tl1_t962x2_x301.dts audio: add stream mute and continuous clk [1/1] PD#SWPL-2952 Problem: Pop noise could be heard when switching between sources. Solution: 1. Add stream digital mute functions. 2. continuous clock to eliminate the clk reset issue. Verify: Local verified. Change-Id: I372f4c03aaf875d75aa903c9c2dfda00619af000 Signed-off-by: Shuai Li <shuai.li@amlogic.com> dts: tl1: enable resample for tl1 [1/2] PD#SWPL-3365 Problem: not resample for audio in, so output in wrong sample rate Solution: 1. enable resample in dts 2. fix to check whether resample is needed Verify: x301 Change-Id: I99238cc21a00ab53df6a1f8ab1703bc9ab48cbaa Signed-off-by: Xing Wang <xing.wang@amlogic.com> Conflicts: arch/arm64/boot/dts/amlogic/tl1_t962x2_t309.dts arch/arm64/boot/dts/amlogic/tl1_t962x2_x301.dts |
||
|
Mauro (mdrjr) Ribeiro
|
b8fc2fa121 |
Merge tag 'v4.9.159' of git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable into odroidn2-4.9.y
This is the 4.9.159 stable release |
||
|
Adrian Bunk
|
852cd5cd0d |
dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string
commit
|
||
|
Kevin Kim
|
620bc954fc |
pwm: gpio: Add a generic gpio based PWM driver
From: Olliver Schinagl <oliver@schinagl.nl> This patch adds a bit-banging gpio PWM driver. It makes use of hrtimers, to allow nano-second resolution, though it obviously strongly depends on the switching speed of the gpio pins, hrtimer and system load. Each pwm node can have 1 or more "pwm-gpio" entries, which will be treated as pwm's as part of a pwm chip. Change-Id: Idd42bf6d79f8ce52275a15965b02af470f28da7c Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> |
||
|
jiejing.wang
|
6b2d479409 |
ODROID-COMMON:Merge AMLogic BSP 181208
ODROID-COMMON:Merge AMLogic BSP 181208 audioinfo: fix kasan compile problem [1/1] PD#173553 Problem: check stack out of bounds Solution: change variable's definition Verify: verifyed by r311 Change-Id: Id6efc3ac56b297b6812e2af786732e65867a07da Signed-off-by: jiejing.wang <jiejing.wang@amlogic.com> buildroot: Enable fb memory allocation in g12b_skt dts [1/1] PD#SWPL-802 Problem: Kernel crash when run GPU slt program Solution: Enable meson fb memory allocation in g12b_skt dts Verify: w400 Change-Id: I3074c2053cda06cf4ae237d24bad2c89d789f90d Signed-off-by: Blance Tang <guofeng.tang@amlogic.com> amvecm: hdr: add hdr10 plus support [1/2] PD#SWPL-869 Problem: new feature, add hdr10 plus support Solution: 1. add hdr10 plus metadat parser 2. add hdr10 plus code support 3. add hdr10 plus bypass mode Verify: verify on U200 Change-Id: I957954ce148021882e17f2913dd2552e64f1298c Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com> irqchip: add a new gpio IRQ driver to support double-edge detection [1/1] PD#SWPL-922 Problem: the existing gpio IRQ driver(porting from the upstream) does not double-edge detection Solution: add a new gpio IRQ driver to support the double-edge detection, the new driver is with different software structure but compatible with functions of the existing driver Verify: test pass on s400 Change-Id: Id69dd0b4459eef20a6755947c7d95a24d7b17fa9 Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> pinctrl: fix some mistakes [1/1] PD#172438 Problem: 1. return a negative when parsing the dts property "output-high/output-low" 2. the prefix "bt565" don't meet corepinmux document Solution: 1. add break statement in case PIN_CONFIG_OUTPUT to avoid returning a negative value. 2. rename the "bt565" to "bt656" according to corepinmux document Verify: test pass on U200 Change-Id: Ieeb98367e2269007a6774592abac86ef05ee8f64 Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> amvecm: fix flicker when change between Launcher and Signal Source [1/1] PD#SWPL-848 Problem: ioctrl set the same gamma value again Solution: if the gamma value is same as the ioctrl userspace value, do not set again Verify: txlx Change-Id: I6f17f5ff234513c5a886004aedea81b9945c5b98 Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com> vpu: add support for tl1 [1/1] PD#172587 Problem: Bringup vpu for TL1. Solution: Add vpu support for TL1. Verify: Verified on PTM/PXP. Change-Id: Ic2fb7682ddc1b21840e1be1d8462d4c0902e739d Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com> lcd: add tl1 support [1/1] PD#172587 Problem: not support tl1 Solution: add tl1 support Verify: test pass on PTM Change-Id: I5a9073fc08a98ae95d4961297a7427864d92279b Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com> backlight: add support for tl1 [1/1] PD#172587 Problem: do not suppoert for tl1 Solution: add backlight support for fl1 Verify: verified on PTM Change-Id: I052a7ef93ec9cb21a544e4823a4c9a339d38b5f9 Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com> arm: dts: tl1: add decoder device tree [3/3] PD#174543 PD#172587 Problem: new added function for tl1 Solution: add vdin afbce support for tl1 Verify: verified on PTM Change-Id: I42054b8228161713ac10446491ebdb50a71975ad Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com> media: add codec support for tl1 [1/1] PD#172587 Problem: Bringup codec for TL1. Solution: Add codec iomap device tree node for TL1. Add canvas device tree node for TL1. Verify: Verified on PXP/PTM. Change-Id: I8b9a6645f1f9fd7d4aa9cae6166895e61ddc3e36 Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com> rdma: add rdma support for tl1 [1/1] PD#172587 Problem: Bringup rdma for TL1. Solution: Add rdma support for TL1. Verify: Verified on PXP/PTM. Change-Id: I425edc1e47db2ea834fcc5acb0e3d0ee1f30a9f7 Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com> osd: tl1: add osd support for tl1 [1/1] PD#172587 Problem: Bringup osd for TL1. Solution: Add osd support for TL1. Add ge2d device tree node for TL1. Verify: Verified on PXP/PTM. Change-Id: I3d20934f015108f545c3c72b979d1bd8187b282e Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com> amvideo: add amvideo support for tl1 [1/1] PD#172587 Problem: TL1 needs support amvideo driver. Solution: 1. Add amvideo node into dts file, default enable. 2. Change the vd mif and sr reg offset. 3. Force bypass dolby vision function. 4. Change the register following hardware design. 5. Make amvideo afbc work for tl1. Verify: On PTM. Change-Id: I0d857f8a707328383328daa23e6ba8e156c2e6e0 Signed-off-by: Brian Zhu <brian.zhu@amlogic.com> audio: auge: add sound card support for tl1 [1/1] PD#172587 Problem: Bringup tl1 sound card. Solution: Add tl1 sound card. Add external interface for audio input/output. Verify: Tested by PTM Sound card is setup. TDM and SPDIF internel loopback is ok Change-Id: I60830ca44a62ee2a8e16343e91e7311152cab161 Signed-off-by: Xing Wang <xing.wang@amlogic.com> vdac: vdac: add vdac support for tl1 [1/1] PD#172587 Problem: do not suppoert for tl1 Solution: add vdac support for fl1 Verify: test pass on local Change-Id: I7b3da34289dfe0638a24b812658db7e462ebdd4c Signed-off-by: Nian Jing <nian.jing@amlogic.com> avin: add avin detect support for tl1 [1/1] PD#172587 Problem: do not suppoert for tl1 Solution: add avin detect support for fl1 Verify: just coding for tl1 will test later Change-Id: I809f7068c9d0a45c89bd7dc4e6615db99b11f015 Signed-off-by: Nian Jing <nian.jing@amlogic.com> tvin: add vdin and viu support for tl1 [1/1] PD#172587 Problem: do not suppoert for tl1 Solution: add vdin and viu support for fl1 Verify: verified on PTM Change-Id: If4e267356fa666541853cfc7b49008795f9ec301 Signed-off-by: xuhua zhang <xuhua.zhang@amlogic.com> vdin: add afbce function for tl1 [1/1] PD#172587 Problem: new added function for tl1 Solution: add vdin afbce support for tl1 Verify: verified on PTM Change-Id: I5e3e2487b6cdbed2d2ca794a6a21ed885e4bf469 Signed-off-by: xuhua zhang <xuhua.zhang@amlogic.com> hdmirx: hdmirx driver for tl1 [1/1] PD#172587 Problem: hdmirx bringup for tl1 Solution: 1.modify write top api, add addr offset -qy 2.modify write edid api -qy 3.replace top hw reset api 4.add aocec access register idle -qy 5.for tl1 bypass sw eq -qy 6.replace pddq api -qy 7.modify arc control for tl1 -qy 8.add n/cts auto mode 9.add hdcp balance path 10.add sscp mode 11.optimize reg map(rm unused reg addr) 12.add recent commits from 4.9 trunk 13.modify top clk cntl bit definition 14.modify top offset addr handle(x4) 15.add audio pll setting -qy 16.update phy setting - qy 17.modify audio pll ctrl api for tl1 -qy -add clk monitor function -add clk stable api for tl1 18.add emp data to pfifo -qy 19.modify edid write and other function -qy 20.add emp data to ddr -qy 21.add tmds data to ddr -qy 22.add cec for tl1 -qy -fix ctc 7-1 -add status register for cec a/b 23.add cec and hdmirx dts -qy 24.clean tl1 rx related clk measure 25.hdmirx and cec dts Verify: 1.run PTM 2.need verify on chip Change-Id: Ia7cc5a2d84925587bdfae825936ba763713926af Signed-off-by: Yong Qin <yong.qin@amlogic.com> audio: codec: add tl1_acodec support for tl1 [1/1] PD#172587 Problem: Add aml_tl1_acodec driver support for tl1 Solution: 1.add files sound/soc/codecs/amlogic/aml_codec_tl1.acodec.c(.h) 2.update files sound/soc/codecs/amlogic/Kconfig(Makefile) Verify: kernel build passed, need verified after chipback Change-Id: I19717a442f22f5b6844627475992ef7c8cc20a71 Signed-off-by: shuyu.li <shuyu.li@amlogic.com> hdmirx: add hdmirx repeater function [1/6] PD#SWPL-323: Problem: add hdmi repeater function Solution: 1.add the edid receive and mix. 2.add the flow of repeater. Verify: R321 Change-Id: I9942c5f345e2fdfff110f01d4d0c2b4b23120c07 Signed-off-by: hongmin hua <hongmin.hua@amlogic.com> ddr: fix bandwidth read result 0 on 32bit OS [1/1] PD#SWPL-960 Problem: Reading bandwidth of DDR from sysfs get all 0 result on 32 bit kernel Solution: Fix overflow when calculating bandwidth. Verify: P212 Change-Id: I35837db653bdc2d97ced98689546a9ffc0db21c7 Signed-off-by: tao zeng <tao.zeng@amlogic.com> mm: reduce watermark if free cma is too large [1/1] PD#SWPL-807 Problem: Sometimes driver can't allocation memory under atomic environment. And free pages is enough but they are nearly ALL CMA pages. Solution: Reduce watermark with harf of free cma pages even allocation support CMA. Verify: P212 Change-Id: I8e49768d4384ed064775537754a2b7f09a5bbb7c Signed-off-by: tao zeng <tao.zeng@amlogic.com> avb: avb enable need to translate more types [1/1] PD#SWPL-1095 Problem: avb need more command line size. Solution: change max size to 2048 Verify: verify by ampere Change-Id: I9c1089a3ea0888e8ccd82f16d2b1111b6d88922a Signed-off-by: Luan Yuan <luan.yuan@amlogic.com> mm: avoid pages migrated to different zone [1/1] PD#SWPL-881 Problem: Amlogic modified code when compatcion from normal case. And side effect is that pages in normal zone maybe migrated to highmem zone. Which caused page_address get a NULL value and kernel panic occurred. Solution: Avoid pages migarte to different zone by adding forbid_to_cma flags. Verify: P212 Change-Id: I1d9c6653dc1069562db3c1be3f53a3510a51f0d1 Signed-off-by: tao zeng <tao.zeng@amlogic.com> usb: adb reboot and then adb disconnect [1/1] PD#174155 Problem: complete_ep 0xffffffc05bed2858, ep->queue empty! 1. After adb process be killed, data buffer is freed and this memory is allocated for the other. But the address is hold by the controller. 2. Adbd in PC is running. So, the controller receive the data and write to this memory. 3.The value of this memory is modified by the controller. This could cause the memory problem. Solution: whenever io_data->aio equals 1, the data buffer is from a fixed array. Verify: Test: adb devices, adb shell, exit, adb push in android8(p212) and android9(w400) verified by he he Change-Id: Idac755d3646639e2944a82f42abf9adb9aeaea8c Signed-off-by: he.he <he.he@amlogic.com> dts: support 32bit for gxm_q201 [1/1] PD#SWPL-1140 Problem: add support 32bit for gxm_q201. Solution: add 32bit dts for gxm_q201. Verify: gxm_q201 Change-Id: I3c9a6ae72fad6575bd814818967d9ff80e62f5d4 Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com> amvecm: pq: add amvecm support for tl1 [1/1] PD#172587 Problem: new feature, add amvecm support for tl1 Solution: 1. add cm hist for tl1 2. add 3dlut for tl1 3. add hdr support for tl1 4. add wb for tl1 5. add local contrast Verify: verify on tl1 ptm Change-Id: I1c7ebb83a1fb72a4529415fb9bf4acfd134e6b11 Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com> dts: add ir cut control GPIO [1/1] PD#SWPL-900 Problem: add ir cut control Solution: add ir cut control GPIO Verify: g12b-skt Change-Id: I16c7d03ed4cc1dd3842cab80a987dde1a83e5cbc Signed-off-by: yu.zhang <yu.zhang@amlogic.com> hdmitx: add init code for repeater [2/6] PD#SWPL-323 Problem: For TXLX/T962E, it has both HDMI Rx and TX, and lacks of HDMI repeater functions, including HDCP repeater function. Solution: Add the init code for hdmi repeater Verify: TXLX/T962E/R321 Change-Id: Iaf17ae62c590ff4f8478dd5556f3ed24b9ff3bb1 Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com> atv_demod: switch channel with the script, the ATV shows no signal [1/1] PD#SWPL-791 Problem: Switch channel with the script lasts 14 hours, the ATV shows no signal. Solution: To avoid conflict, don't need to check the CLK and PLL states in atv demod write and read function. Verify: verified by p321 Change-Id: I033c54f14541ed540dfce1b9c4e21d2b5a8b9487 Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com> media: keep last normal frame before reset [2/2] PD#OTT-71 Problem: google cast display green lump when seek. reset after seek opration. Solution: keep last normal frame before reset and buf free. Verify: U211, Atom Change-Id: I02304998c9434f1055de1138700510f4c19f466f Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com> unifykey: add the hdmirx repeater key block [3/6] PD#SWPL-323: Problem: add the hdmirx repeater key block Solution: add the hdmirx repeater key block. Verify: R321 Change-Id: I61920b706b5dd08c6be9647add287f85b35fb0ee Signed-off-by: hongmin hua <hongmin.hua@amlogic.com> mm: make sure the gtp flag is low default [1/1] PD#SWPL-807 Problem: The app's window cound be black screen when launched if the ion system does not retry to allocate memory with the gtp high flag. Solution: make sure the gtp flag is low default Verify: P212 Change-Id: I562125573f8175cd180196ca73eb04d7dd36add0 Signed-off-by: an.xi <an.xi@amlogic.com> dts: emmc: uboot enable emmc config [2/3] PD#SWPL-736 Problem: The s400 emmc platform uboot cannot be loaded into kernel normally Solution: enable enable emmc node in dtb by fdt command. and modify malloc max size to 18M. Verify: s400 Change-Id: Iaef58f1b05a952793d414eb82ac476d88d910fe1 Signed-off-by: yuegui.he <yuegui.he@amlogic.com> dts: GVSDK: modify loopback and led device name [1/1] PD#173996 Problem: 1. to support hw loopback channel 2,3 for GVSDK. 2. led is31fl32xx device name register fail. Solution: 1. change boolback to channel 2,3 2. register led is31fl32xx name success. Verify: S400_GVSDK/S420_GVSDK Change-Id: Ie1bbc01c4624fd1e2e2662c4d9c876e56c301a99 Signed-off-by: Renjun Xu <renjun.xu@amlogic.com> mm: exclude free cma pages when calculate watermark [1/1] PD#SWPL-1210 Problem: Some drivers(eth/wifi) occasionally can't allocate memory under atomic context. From mem status print, there are enough free pages but most of them are CMA. Solution: Exclude free cma pages when calculate water mark. This can push kswapd/compaction work more aggressive. Verify: P212 Change-Id: Ia723f21c0316eff1a38e759ff9f044bb59aa8efa Signed-off-by: tao zeng <tao.zeng@amlogic.com> dv: set stb core run_mode_delay as 0 [1/1] PD#SWPL-781 Problem: when starting to play video, the manu bar shakes Solution: stb core don't need run mode delay. Verify: t962e (txlx) Change-Id: I22ba5d778eedd72f87b4c687b38acf1b8c6d6fc9 Signed-off-by: Yi Zhou <yi.zhou@amlogic.com> dv: fix the green screen when changing dv mode [1/1] PD#SWPL-1029 Problem: when changing dv mode from standard to ll mode. wn tp vks should be enabled Solution: enable wn tp vks when setting ll mode Verify: t962e (txlx) Change-Id: I3b399132cf1a3c7b1799f36f9bc3a0696883029f Signed-off-by: Yi Zhou <yi.zhou@amlogic.com> lcd: lcd_extern: fix get invalid extern_driver null pointer mistake [1/1] PD#SWPL-1152 Problem: There is a null pointer mistake in lcd_extern_get_driver for invalid driver Solution: add null pointer protection Verify: txlx r311 Change-Id: I171d10ab26e6c298b8eb4065dfa054a237bfd53b Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com> crypto: Enable ARMCE and set aes dma to slow mode [1/1] PD#SWPL-574 Problem: xfrm test failed randomly in VtsKernelNetTest due to random failed in gcm(aes) Solution: Use ARMCE for small sized crypto processing and use copy mode when HW dma is used Verify: verified on ampere Change-Id: I31cd75cfcd85da9fc9e9640135c7ce76623ef715 Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com> USB: host: tuning disconnect threshold on g12a/g12b [2/2] PD#174736 Problem: Some usb device may disconnect when handshake Solution: tuning disconnect threshold when usb host initial now default is 0x24, only three value can tuning, 0x2c,0x34,0x3c we set 0x34 now Verify: Google estelle boards which return from factory no side effect on refernce u200 board Change-Id: I71d974a6bac43452b20bd7f2a6827d3a46fa39fb Signed-off-by: qi duan <qi.duan@amlogic.com> audio: solve av out output level low issue [2/2] PD#SWPL-766 Problem: av output level only 100mv Solution: change the channel map for av out, use orignal pcm for output w/o volume control and postprocess. Verify: verified by r311 Change-Id: Ibeaf0ecfda03f81ff6061dc9c4975049452ba659 Signed-off-by: Lianlian Zhu <lianlian.zhu@amlogic.com> Signed-off-by: Jian Xu <jian.xu@amlogic.com> chipid: meson: add ops id for S805Y [1/2] PD#SWPL-940 Problem: Need ops id api for S805Y Solution: Add ops id api Verify: s805y_p215 Change-Id: I179f87acbc3f57456e0359bd0d502c58cc3a9b9c Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> hdmitx: add feature limited [3/3] PD#174490 Problem: Lack feature limited for certain types Solution: Add feature limited for certain types Verify: TBD Change-Id: Ifbe104fe98fe1e3875f2f1af7793348856275b92 Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com> dts: support 32bit for g12b_w400 [1/1] PD#SWPL-1010 Problem: add support 32bit for g12b_w400 Solution: add 32bit dts of g12b_w400. Verify: g12b_a311d_w400 Change-Id: I30ac9cb80721b04a13532ceb5c14f76bdf1cc575 Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com> display: dts modify [1/1] PD#TV-405 Problem: Should create a 720p ui display mode on p321. Solution: Created a folder named t962_p321_720p under device/amlogic and modified some variate. The diffs that compare with txl_t962_p321.dts amlogic-dt-id = "txl_p321_v1_720p"; size = <0x400000>; alloc-ranges = <0x3fc00000 0x400000>; mem_size = <0x00400000 0x00b00000 0x00100000>; /* uboot logo,fb0/fb1 memory size,if afbcd fb0=0x0b51000*/ display_mode_default = "720p60hz"; /*1280*720*4*3 = 0xA8C000*/ display_size_default = <1280 720 1280 2160 32>; logo_addr = "0x3fc00000"; Verify: p321 Change-Id: Ia397cd6cbcf4fdd9fb139259099805bdad90b92f Signed-off-by: Guotai Shen <guotai.shen@amlogic.com> dts: support 32bit for gxl_p230 [1/1] PD#SWPL-1116 Problem: add support 32bit for gxl_p230. Solution: add 32bit dts for gxl_p230. Verify: gxl_p230 Change-Id: Icc62c45e7bd36e8248ad0bb11a67a0151cf7ea34 Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com> dts: sync difference between arch32 and arch64 [1/1] PD#SWPL-959 Problem: sync arch32 and arch64 dts. Solution: sync arch32 and arch64 dts. Verify: r311 Change-Id: I493c83f38899628ac65c637e81f053a7c22bd24f Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com> cec: for support multi-logical address [1/2] PD#SWPL-418 Problem: cec: for support mult-logical address Solution: 1.add interface: remove logical address 2.for support multi-logical address Verify: r311 r321 Change-Id: I9ea8b1004f43fb84855d41dd684c117fa5cbd7ae Signed-off-by: Yong Qin <yong.qin@amlogic.com> cec: for support multi-logical address [2/2] PD#SWPL-418 Problem: cec: support multi-logical address Solution: 1.enable cec_a, cec_b 2.enable two interrupt 3.enable two pinmux oa_7, ao_8 4.cec_a only send all msg 5.cec_b only receive all msg 6.discard ceca broadcast msg Verify: r311 r321 Change-Id: I8f983ed6ad329ca5ec0144587a7ad1f03ad68031 Signed-off-by: Yong Qin <yong.qin@amlogic.com> emmc: ffu: add emmc ffu update support [1/1] PD#174683 Problem: kernel emmc ffu is not supported. Solution: add emmc ffu update support with mmc untils. Verify: p212 Change-Id: Ice9ffb174c061e3f114b0b68af290492808b0a5e Signed-off-by: Nan Li <nan.li@amlogic.com> codec_mm: add reserved & cma support for 4.9. [1/1] PD#172483 Problem: Add reserved & cma support for 4.9. Solution: 1. add tvp padding, for test. 2. add no-cma-tvp,to force not used cma for tvp. 3. add nomap for reserved memroy detective. 4. add res & cma two mem region on same board. 5. add clear-map property for codec_mm_cma. Verify: Test this function with Android_O-MR1(GTVS) & ExoPlayer. Change-Id: Ib20e0e9bc4725afb271de97543ce5ebf3bfcfb29 Signed-off-by: Zhi Zhou <zhi.zhou@amlogic.com> mm: clear MMU mapping for secure os memory [1/1] PD#SWPL-1631 Problem: If Cortex A73 accessed memory near secure memory range, an SError may occur due to prefetch of A73 core. Solution: Remove mmu maping of secure memory range. Note: must add clear-map and set clear range property in DTS Verify: W400 Change-Id: I718919c1b4873584eb87e00332622a1626672808 Signed-off-by: tao zeng <tao.zeng@amlogic.com> cec: revert changesy [1/1] PD#SWPL-418 Problem: TXL can't bootup Solution: revert it Verify: p321 Revert "cec: for support multi-logical address [2/2]" This reverts commit |
||
|
charles.park
|
21b6e890e2 |
ODROID-N2: ODROID 3.5" I2C Touch sx8650 Document added.
Change-Id: Ia83e31210e7c02437e4a3dc585cbfd8eadf9b464 |
||
|
Mauro (mdrjr) Ribeiro
|
1de3a94f7e |
Merge tag 'v4.9.134' into odroidn2-4.9.y
This is the 4.9.134 stable release |
||
|
Mauro (mdrjr) Ribeiro
|
2e4823bd03 |
Merge tag 'v4.9.117' into odroidn2-4.9.y
This is the 4.9.117 stable release |
||
|
Kevin Kim
|
760652e608 |
This driver allows GPIO lines to be used as reset signals.
It has two main use cases: 1) Allow drivers to reset their hardware via a GPIO line in a standard fashion as supplied by the reset framework. This allows adhoc driver code requesting GPIOs etc to be replaced with a single call to device_reset(). 2) Allow hardware on discoverable busses to be rest via a GPIO line without driver modifications. Examples of the second use case include: * SDIO wifi modules * USB hub chips with a reset line In this second use case the reset has to be done externally to the driver managing the hardware since resetting the device from the driver's probe() method will either do nothing (if the device needs to be reset before ennumeration will work) or cause racy beahviour (when the device disappears from the bus during probe()). So, in addition to providing a gpio based reset controller implementation it is also possible to reset devices at boot via a DT property or from userspace on request via sysfs attributes. Change-Id: I316f9e622d99cff7167b57e8fd5ff73a34dc2a81 Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Kevin Kim <ckkim@hardkernel.com> |
||
|
Nicolas Ferre
|
3f724feca2 |
ARM: dts: at91: add new compatibility string for macb on sama5d3
[ Upstream commit
|
||
|
Jian Hu
|
450bf2094a |
clock-measure: tl1: add clock measurement support
PD#172587: clock-measure: tl1: add clock measurement support Change-Id: I14ab8859b205154bb89139e215fef5898efac681 Signed-off-by: Jian Hu <jian.hu@amlogic.com> |
||
|
Bo Yang
|
91b9f08333 |
watchdog: meson: add watchdog support for tl1
PD#172587: watchdog: meson: add watchdog support for tl1 TL1's watchdog is same with G12A. Change-Id: Iaa8c502e6a8889a33ed2875e7a16cca07873738a Signed-off-by: Bo Yang <bo.yang@amlogic.com> |
||
|
Jian Hu
|
b8a2f778b1 |
clock: tl1: initial add tl1 clock driver
PD#172587: clock: tl1: initial add tl1 clock driver Initial add tl1 clock driver refered to txlx clock driver. Change-Id: I2f25c465ae7f3f4e65e842a9d0c35f0e0e75662f Signed-off-by: Jian Hu <jian.hu@amlogic.com> |
||
|
bichao.zheng
|
1920f10340 |
pwm: meson: add support for tl1
PD#172587: pwm: meson: add support for tl1 Add support for tl1. Change-Id: I5db1be16765a8e2f2a07815e6d7d139eec4dcf16 Signed-off-by: bichao.zheng <bichao.zheng@amlogic.com> |
||
|
Xingyu Chen
|
e5378c8b68 |
irqchip: meson: add gpio IRQ support for tl1
PD#172587: irqchip: add gpio IRQ support for tl1 Change-Id: I35480088e85c0bb26d04158ced42c3d85153f806 Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> |
||
|
Xingyu Chen
|
6da2e5835a |
pinctrl: meson: add pinctrl & gpio driver for tl1
PD#172587: pinctrl: add pinctrl & gpio driver for tl1 Change-Id: Ibd04477b8e6d586f4263cda9760b06c3e8e6ac72 Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> |
||
|
jinrong.liao
|
39035cef86 |
DTS: fix the dts configuration error of leds
PD#172284: this commit changes mainly for GVA 1) fix the dts configuration error of leds 2) enable "is31fl3236a" driver Change-Id: Ic2135991b39dcca78b0b09158af0cf9b3f5fb87d Signed-off-by: jinrong.liao <jinrong.liao@amlogic.com> |
||
|
jinrong.liao
|
1d1b1ef084 |
input: add pca9557 keypad driver for new mic board D607
PD#172286: this commit changes mainly for GVA 1) keypad: add pca9557 keypad driver for new mic board D607. Change-Id: I0d9ec9626362b3d87d6c55e5c967bfa4486b1472 Signed-off-by: jinrong.liao <jinrong.liao@amlogic.com> |
||
|
jinrong.liao
|
a4625c4ac3 |
input: add touch sensor driver.
PD#172287: this commit changes mainly for GVA 1) add sensor cy8c4014 driver. Change-Id: Ic1ed6cf2a42e2286e4860946d89091a3dd524ef8 Signed-off-by: jinrong.liao <jinrong.liao@amlogic.com> |
||
|
Victor Wan
|
cc7b1eac54 |
Merge branch 'android-4.9' into amlogic-4.9-dev
Signed-off-by: Victor Wan <victor.wan@amlogic.com> Conflicts: drivers/md/dm-bufio.c drivers/media/dvb-core/dvb_frontend.c drivers/usb/dwc3/core.c drivers/usb/gadget/function/f_fs.c |
||
|
Yi Zeng
|
8e6dad10fb |
mtd: spifc: add spifc support for txl
PD#171041: mtd: spifc: add spifc support for txl Change-Id: I487161c6e85e3b232ed0c3891784b5a37f6d878c Signed-off-by: Yi Zeng <yi.zeng@amlogic.com> |
||
|
Renjun Xu
|
305e6776cd |
audio: fix adc3101 8ch PCM format support
PD#171085: fix adc3101 8ch PCM format support For S400 & S420 board, please modify dts to enable adc3101 8ch PCM please read following file: Documentation/devicetree/bindings/amlogic/axg-adc3010-pcm.txt Change-Id: I945441f80d269b167148ccf3d6c33093a20a4f2f Signed-off-by: Renjun Xu <renjun.xu@amlogic.com> |
||
|
Michal Vokáč
|
53a1a29a92 |
net: dsa: qca8k: Add QCA8334 binding documentation
commit
|
||
|
Yixun Lan
|
68f96e5410 |
dt-bindings: net: meson-dwmac: new compatible name for AXG SoC
[ Upstream commit
|
||
|
Martin Blumenstingl
|
77620f3990 |
dt-bindings: pinctrl: meson: add support for the Meson8m2 SoC
[ Upstream commit
|
||
|
Xindong Xu
|
e37c6e9891 |
arm64: dts: add atom & Beast project [1/1]
PD#170502: add atom & Beast project Change-Id: I50da79dbb660372528c5abcdf5da4bb13773bf6c Signed-off-by: Xindong Xu <xindong.xu@amlogic.com> |
||
|
Sunny Luo
|
09f3fbb011 |
dts: spicc: change txl dts to use upstream driver
PD#164751: dts: spicc: change txl dts to use upstream driver Change-Id: Ibf51059122d31316bb644d6431466e36afe44cb6 Signed-off-by: Sunny Luo <sunny.luo@amlogic.com> |
||
|
Jian Hu
|
091a289acc |
reboot: meson: standardize the compatible property
PD#168480: reboot: meson: standardize the compatible property Use 'amlogic,reboot' instead of 'aml,reboot'. 'aml,reboot' will be removed later. Change-Id: I7d16795c98aa293fe204121ccd7da41c7d078f77 Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Bo Yang <bo.yang@amlogic.com> |
||
|
Bo Yang
|
c6f2253cee |
watchdog: meson: add watchdog support for txl
PD#168480: add watchdog support for txl Change-Id: I53ac23d1fedec155871ecec3229dedeb13ca7076 Signed-off-by: Bo Yang <bo.yang@amlogic.com> |
||
|
Xingyu Chen
|
b02a434b18 |
iio: adc: meson: add sar adc support for txl
PD#168480: iio: adc: meson: add sar adc support for txl Change-Id: I9febffdb4fef582f5a91138491ae87d11ca240ee Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by: Bo Yang <bo.yang@amlogic.com> |
||
|
Xingyu Chen
|
1d4900ea6c |
irqchip: meson: add gpio IRQ support for txl
PD#168480: irqchip: meson: add gpio IRQ support for txl Change-Id: I03b32a3ffe4a7e9b63631ac5e593bcbf346b8765 Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by: Bo Yang <bo.yang@amlogic.com> |
||
|
Jian Hu
|
d049ab634b |
i2c: meson: add support for txl
PD#168480: i2c: meson: add support for txl Change-Id: I0c4fe9d2e6caec0cfa812af28476774db69a4e89 Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Bo Yang <bo.yang@amlogic.com> |
||
|
Xingyu Chen
|
821c9713cb |
pinctrl: txl: add pinctrl & gpio support for txl
PD#168480: pinctrl: txl: add pinctrl & gpio support for txl Change-Id: I2496cdebfc283e90825f5dd7d20b0e16f57158d2 Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by: Bo Yang <bo.yang@amlogic.com> |
||
|
Jian Hu
|
a53f89545d |
clk: txl: initial add clock driver
PD#168480: clk: txl: initial add clock driver remove CLK_SET_RATE_PARENT flag for spicc. If add CLK_SET_RATE_PARENT, it will change clk81 rate when set spicc clock rate. Change-Id: I80fec2c6d10611994ff40b06307e39b51ddb5a1a Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Bo Yang <bo.yang@amlogic.com> |
||
|
Sunny Luo
|
34616dd660 |
spicc: add dma and enhance features of axg/txhd/g12a/g12b.
PD#164751: spicc: add dma and enhance features of axg/txhd/g12a/g12b. 1. fix TESTREG bits defination error; 2. fix cs-gpio error in slave setup; 3. reset fifo to avoid successive fifo error before tansfer; 4. add enhance feature of cs-preload delay control; 5. add auto io delay control; 6. add enhance feature of tt/ti delay control; 7. fix clk error which occurred certainly when sencond spicc added; 8. surpport both auto core clk and fixed core clk rate setting: set dts "fixed_core_rate = <200000000(example)>" to use fixed core rate. otherwise, to use auto core clk. 9. support loop-back mode; 10. support DMA transfer; 11. must delete 1000M from parent clk. 12. It will be wrong when enhance divider=2. we have to add a flag CLK_DIVIDER_PROHIBIT_ZERO to shield against it. Change-Id: I820a52e6d31d3fe2e3615a0f4c5a07c17d11914d Signed-off-by: Sunny Luo <sunny.luo@amlogic.com> |
||
|
pengcheng chen
|
fce54c8573 |
osd_drm: osd drm for g12b bring up
PD#165090: osd drm for g12b bring up Change-Id: Id69a152b22ba3e408d20fa494b9475c9ad3797de Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com> |
||
|
bichao.zheng
|
9bca4ec549 |
pwm: pwm driver compatible with g12b
PD#165090: pwm: pwm driver compatible with g12b pwm driver compatible with g12b,enable pwm controller pwm_AO_cd pwm_ab pwm_ef for dvfs and wifi. Change-Id: If65c4b5239ee0a4f4409aa85d9481645b44521e9 Signed-off-by: bichao.zheng <bichao.zheng@amlogic.com> |
||
|
Jian Hu
|
5cdd52e2f0 |
i2c: add support for g12b
PD#165090: i2c: add support for g12b Change-Id: I2240e361dff3e3d56898ffb4f43c1ad4cadd3912 Signed-off-by: Jian Hu <jian.hu@amlogic.com> |
||
|
Qiufang Dai
|
f6739bf8ea |
clk: add g12b.c for g12b new clocks
PD#165090: add g12b.c for new clocks, include sys1_pll Change-Id: If9234037eab5439cf1abfbcecc70c9f4eab6c954 Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Hong Guo <hong.guo@amlogic.com> |
||
|
Greg Kroah-Hartman
|
00a0bcbfcf |
Merge 4.9.110 into android-4.9
Changes in 4.9.110 objtool: update .gitignore file xfrm6: avoid potential infinite loop in _decode_session6() netfilter: ebtables: handle string from userspace with care ipvs: fix buffer overflow with sync daemon and service iwlwifi: pcie: compare with number of IRQs requested for, not number of CPUs atm: zatm: fix memcmp casting net: qmi_wwan: Add Netgear Aircard 779S platform/x86: asus-wmi: Fix NULL pointer dereference net/sonic: Use dma_mapping_error() net: dsa: b53: Add BCM5389 support Revert "Btrfs: fix scrub to repair raid6 corruption" tcp: do not overshoot window_clamp in tcp_rcv_space_adjust() Btrfs: make raid6 rebuild retry more usb: musb: fix remote wakeup racing with suspend bonding: re-evaluate force_primary when the primary slave name changes ipv6: allow PMTU exceptions to local routes net/sched: act_simple: fix parsing of TCA_DEF_DATA tcp: verify the checksum of the first data segment in a new connection ALSA: hda/realtek - New codec support for ALC257 ext4: fix hole length detection in ext4_ind_map_blocks() ext4: update mtime in ext4_punch_hole even if no blocks are released ext4: fix fencepost error in check for inode count overflow during resize driver core: Don't ignore class_dir_create_and_add() failure. Btrfs: fix clone vs chattr NODATASUM race Btrfs: fix memory and mount leak in btrfs_ioctl_rm_dev_v2() btrfs: scrub: Don't use inode pages for device replace ALSA: hda - Handle kzalloc() failure in snd_hda_attach_pcm_stream() ALSA: hda: add dock and led support for HP EliteBook 830 G5 ALSA: hda: add dock and led support for HP ProBook 640 G4 smb3: on reconnect set PreviousSessionId field cpufreq: Fix new policy initialization during limits updates via sysfs libata: zpodd: make arrays cdb static, reduces object code size libata: zpodd: small read overflow in eject_tray() libata: Drop SanDisk SD7UB3Q*G1001 NOLPM quirk w1: mxc_w1: Enable clock before calling clk_get_rate() on it orangefs: set i_size on new symlink HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation vhost: fix info leak due to uninitialized memory fs/binfmt_misc.c: do not allow offset overflow Linux 4.9.110 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> |
||
|
Damien Thébault
|
60649dacb3 |
net: dsa: b53: Add BCM5389 support
[ Upstream commit
|
||
|
Matthew Shyu
|
7ad8db81e5 |
crypto: aml-dma: Enable HW crypto on G12A
PD#167825: Enable HW crypto on G12A and rework sha driver 1. allocate atomic mem to avoid sleep 2. rework import and export function for fixing race conditions 3. rework hmac setkey to avoid HW bug 4. Use fallback on AES-192 5. passed all AES and SHA related tests in tcrypt Change-Id: I1c0dcbbad025f0d8d7c16f921948a8cb6d4b2548 Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com> |
||
|
Greg Kroah-Hartman
|
9797dcb8c7 |
Merge 4.9.104 into android-4.9
Changes in 4.9.104
MIPS: c-r4k: Fix data corruption related to cache coherence
MIPS: ptrace: Expose FIR register through FP regset
MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs
KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"
affs_lookup(): close a race with affs_remove_link()
aio: fix io_destroy(2) vs. lookup_ioctx() race
ALSA: timer: Fix pause event notification
do d_instantiate/unlock_new_inode combinations safely
mmc: sdhci-iproc: remove hard coded mmc cap 1.8v
mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register
libata: Blacklist some Sandisk SSDs for NCQ
libata: blacklist Micron 500IT SSD with MU01 firmware
xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros
IB/hfi1: Use after free race condition in send context error path
Revert "ipc/shm: Fix shmat mmap nil-page protection"
ipc/shm: fix shmat() nil address after round-down when remapping
kasan: fix memory hotplug during boot
kernel/sys.c: fix potential Spectre v1 issue
kernel/signal.c: avoid undefined behaviour in kill_something_info
KVM/VMX: Expose SSBD properly to guests
KVM: s390: vsie: fix < 8k check for the itdba
KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed
kvm: x86: IA32_ARCH_CAPABILITIES is always supported
firewire-ohci: work around oversized DMA reads on JMicron controllers
x86/tsc: Allow TSC calibration without PIT
NFSv4: always set NFS_LOCK_LOST when a lock is lost.
ALSA: hda - Use IS_REACHABLE() for dependency on input
kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl
netfilter: ipv6: nf_defrag: Pass on packets to stack per RFC2460
tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account
PCI: Add function 1 DMA alias quirk for Marvell 9128
Input: psmouse - fix Synaptics detection when protocol is disabled
i40iw: Zero-out consumer key on allocate stag for FMR
tools lib traceevent: Simplify pointer print logic and fix %pF
perf callchain: Fix attr.sample_max_stack setting
tools lib traceevent: Fix get_field_str() for dynamic strings
perf record: Fix failed memory allocation for get_cpuid_str
iommu/vt-d: Use domain instead of cache fetching
dm thin: fix documentation relative to low water mark threshold
net: stmmac: dwmac-meson8b: fix setting the RGMII TX clock on Meson8b
net: stmmac: dwmac-meson8b: propagate rate changes to the parent clock
nfs: Do not convert nfs_idmap_cache_timeout to jiffies
watchdog: sp5100_tco: Fix watchdog disable bit
kconfig: Don't leak main menus during parsing
kconfig: Fix automatic menu creation mem leak
kconfig: Fix expr_free() E_NOT leak
mac80211_hwsim: fix possible memory leak in hwsim_new_radio_nl()
ipmi/powernv: Fix error return code in ipmi_powernv_probe()
Btrfs: set plug for fsync
btrfs: Fix out of bounds access in btrfs_search_slot
Btrfs: fix scrub to repair raid6 corruption
btrfs: fail mount when sb flag is not in BTRFS_SUPER_FLAG_SUPP
HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()
fm10k: fix "failed to kill vid" message for VF
device property: Define type of PROPERTY_ENRTY_*() macros
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes
powerpc/numa: Ensure nodes initialized for hotplug
RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
ntb_transport: Fix bug with max_mw_size parameter
gianfar: prevent integer wrapping in the rx handler
tcp_nv: fix potential integer overflow in tcpnv_acked
kvm: Map PFN-type memory regions as writable (if possible)
ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid
ocfs2/acl: use 'ip_xattr_sem' to protect getting extended attribute
ocfs2: return error when we attempt to access a dirty bh in jbd2
mm/mempolicy: fix the check of nodemask from user
mm/mempolicy: add nodes_empty check in SYSC_migrate_pages
asm-generic: provide generic_pmdp_establish()
sparc64: update pmdp_invalidate() to return old pmd value
mm: thp: use down_read_trylock() in khugepaged to avoid long block
mm: pin address_space before dereferencing it while isolating an LRU page
mm/fadvise: discard partial page if endbyte is also EOF
openvswitch: Remove padding from packet before L3+ conntrack processing
IB/ipoib: Fix for potential no-carrier state
drm/nouveau/pmu/fuc: don't use movw directly anymore
netfilter: ipv6: nf_defrag: Kill frag queue on RFC2460 failure
x86/power: Fix swsusp_arch_resume prototype
firmware: dmi_scan: Fix handling of empty DMI strings
ACPI: processor_perflib: Do not send _PPC change notification if not ready
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y
MIPS: generic: Fix machine compatible matching
MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS
xen-netfront: Fix race between device setup and open
xen/grant-table: Use put_page instead of free_page
RDS: IB: Fix null pointer issue
arm64: spinlock: Fix theoretical trylock() A-B-A with LSE atomics
proc: fix /proc/*/map_files lookup
cifs: silence compiler warnings showing up with gcc-8.0.0
bcache: properly set task state in bch_writeback_thread()
bcache: fix for allocator and register thread race
bcache: fix for data collapse after re-attaching an attached device
bcache: return attach error when no cache set exist
tools/libbpf: handle issues with bpf ELF objects containing .eh_frames
bpf: fix rlimit in reuseport net selftest
vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user page
locking/qspinlock: Ensure node->count is updated before initialising node
irqchip/gic-v3: Ignore disabled ITS nodes
cpumask: Make for_each_cpu_wrap() available on UP as well
irqchip/gic-v3: Change pr_debug message to pr_devel
ARC: Fix malformed ARC_EMUL_UNALIGNED default
ptr_ring: prevent integer overflow when calculating size
libata: Fix compile warning with ATA_DEBUG enabled
selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
selftests: memfd: add config fragment for fuse
ARM: OMAP2+: timer: fix a kmemleak caused in omap_get_timer_dt
ARM: OMAP3: Fix prm wake interrupt for resume
ARM: OMAP1: clock: Fix debugfs_create_*() usage
ibmvnic: Free RX socket buffer in case of adapter error
iwlwifi: mvm: fix security bug in PN checking
iwlwifi: mvm: always init rs with 20mhz bandwidth rates
NFC: llcp: Limit size of SDP URI
rxrpc: Work around usercopy check
mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
mac80211: fix a possible leak of station stats
mac80211: fix calling sleeping function in atomic context
mac80211: Do not disconnect on invalid operating class
md raid10: fix NULL deference in handle_write_completed()
drm/exynos: g2d: use monotonic timestamps
drm/exynos: fix comparison to bitshift when dealing with a mask
locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()
md: raid5: avoid string overflow warning
kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE
powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access
s390/cio: fix ccw_device_start_timeout API
s390/cio: fix return code after missing interrupt
s390/cio: clear timer when terminating driver I/O
PKCS#7: fix direct verification of SignerInfo signature
ARM: OMAP: Fix dmtimer init for omap1
smsc75xx: fix smsc75xx_set_features()
regulatory: add NUL to request alpha2
integrity/security: fix digsig.c build error with header file
locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations
mac80211: drop frames with unexpected DS bits from fast-rx to slow path
arm64: fix unwind_frame() for filtered out fn for function graph tracing
macvlan: fix use-after-free in macvlan_common_newlink()
kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds
fs: dcache: Avoid livelock between d_alloc_parallel and __d_add
fs: dcache: Use READ_ONCE when accessing i_dir_seq
md: fix a potential deadlock of raid5/raid10 reshape
md/raid1: fix NULL pointer dereference
batman-adv: fix packet checksum in receive path
batman-adv: invalidate checksum on fragment reassembly
netfilter: ebtables: convert BUG_ONs to WARN_ONs
batman-adv: Ignore invalid batadv_iv_gw during netlink send
batman-adv: Ignore invalid batadv_v_gw during netlink send
batman-adv: Fix netlink dumping of BLA claims
batman-adv: Fix netlink dumping of BLA backbones
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
clocksource/drivers/fsl_ftm_timer: Fix error return checking
ceph: fix dentry leak when failing to init debugfs
ARM: orion5x: Revert commit
|
||
|
Sunny Luo
|
3f6d2c768f |
spicc: add enhanced features of oen, clock divider
PD#164751: spicc: add enhanced features of oen, clock divider 1. use the definite and significative name "has_oen" and "has_enhance_clk_div" to replace the unclear "is_enhance". 2. add some comment about enhance clk divider. Change-Id: I9ffe51aaf696cdb09b5e486d60b5378c6433783e Signed-off-by: Sunny Luo <sunny.luo@amlogic.com> |
||
|
Gregory CLEMENT
|
3bdcced419 |
dmaengine: mv_xor_v2: Fix clock resource by adding a register clock
[ Upstream commit
|
||
|
Victor Wan
|
324524de04 | Merge branch 'android-4.9' into amlogic-4.9-dev | ||
|
Victor Wan
|
810c6dd972 |
Merge branch 'android-4.9' into amlogic-4.9-dev
Signed-off-by: Victor Wan <victor.wan@amlogic.com> Conflicts: arch/arm/configs/bcm2835_defconfig arch/arm/configs/sunxi_defconfig include/linux/cpufreq.h init/main.c |
||
|
Greg Kroah-Hartman
|
8683408f8e |
Merge 4.9.94 into android-4.9
Changes in 4.9.94 qed: Fix overriding of supported autoneg value. cfg80211: make RATE_INFO_BW_20 the default md/raid5: make use of spin_lock_irq over local_irq_disable + spin_lock rtc: snvs: fix an incorrect check of return value x86/asm: Don't use RBP as a temporary register in csum_partial_copy_generic() x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility ovl: persistent inode numbers for upper hardlinks NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION x86/boot: Declare error() as noreturn IB/srpt: Fix abort handling IB/srpt: Avoid that aborting a command triggers a kernel warning af_key: Fix slab-out-of-bounds in pfkey_compile_policy. mac80211: bail out from prep_connection() if a reconfig is ongoing bna: Avoid reading past end of buffer qlge: Avoid reading past end of buffer ubi: fastmap: Fix slab corruption ipmi_ssif: unlock on allocation failure net: cdc_ncm: Fix TX zero padding net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control lockd: fix lockd shutdown race drivers/misc/vmw_vmci/vmci_queue_pair.c: fix a couple integer overflow tests pidns: disable pid allocation if pid_ns_prepare_proc() is failed in alloc_pid() s390: move _text symbol to address higher than zero net/mlx4_en: Avoid adding steering rules with invalid ring qed: Correct doorbell configuration for !4Kb pages NFSv4.1: Work around a Linux server bug... CIFS: silence lockdep splat in cifs_relock_file() perf/callchain: Force USER_DS when invoking perf_callchain_user() blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op net: qca_spi: Fix alignment issues in rx path netxen_nic: set rcode to the return status from the call to netxen_issue_cmd mdio: mux: Correct mdio_mux_init error path issues Input: elan_i2c - check if device is there before really probing Input: elantech - force relative mode on a certain module KVM: PPC: Book3S PR: Check copy_to/from_user return values irqchip/mbigen: Fix the clear register offset calculation vmxnet3: ensure that adapter is in proper state during force_close mm, vmstat: Remove spurious WARN() during zoneinfo print SMB2: Fix share type handling bus: brcmstb_gisb: Use register offsets with writes too bus: brcmstb_gisb: correct support for 64-bit address output PowerCap: Fix an error code in powercap_register_zone() iio: pressure: zpa2326: report interrupted case as failure ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin staging: wlan-ng: prism2mgmt.c: fixed a double endian conversion before calling hfa384x_drvr_setconfig16, also fixes relative sparse warning clk: renesas: rcar-gen2: Fix PLL0 on R-Car V2H and E2 x86/tsc: Provide 'tsc=unstable' boot parameter powerpc/modules: If mprofile-kernel is enabled add it to vermagic ARM: dts: imx6qdl-wandboard: Fix audio channel swap i2c: mux: reg: put away the parent i2c adapter on probe failure arm64: perf: Ignore exclude_hv when kernel is running in HYP mdio: mux: fix device_node_continue.cocci warnings ipv6: avoid dad-failures for addresses with NODAD async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome() KVM: arm: Restore banked registers and physical timer access on hyp_panic() KVM: arm64: Restore host physical timer access on hyp_panic() usb: dwc3: keystone: check return value btrfs: fix incorrect error return ret being passed to mapping_set_error ata: libahci: properly propagate return value of platform_get_irq() ipmr: vrf: Find VIFs using the actual device uio: fix incorrect memory leak cleanup neighbour: update neigh timestamps iff update is effective arp: honour gratuitous ARP _replies_ ARM: dts: rockchip: fix rk322x i2s1 pinctrl error usb: chipidea: properly handle host or gadget initialization failure pxa_camera: fix module remove codepath for v4l2 clock USB: ene_usb6250: fix first command execution net: x25: fix one potential use-after-free issue USB: ene_usb6250: fix SCSI residue overwriting serial: 8250: omap: Disable DMA for console UART serial: sh-sci: Fix race condition causing garbage during shutdown net/wan/fsl_ucc_hdlc: fix unitialized variable warnings net/wan/fsl_ucc_hdlc: fix incorrect memory allocation fsl/qe: add bit description for SYNL register for GUMR sh_eth: Use platform device for printing before register_netdev() mlxsw: spectrum: Avoid possible NULL pointer dereference scsi: csiostor: fix use after free in csio_hw_use_fwconfig() powerpc/mm: Fix virt_addr_valid() etc. on 64-bit hash ath5k: fix memory leak on buf on failed eeprom read selftests/powerpc: Fix TM resched DSCR test with some compilers xfrm: fix state migration copy replay sequence numbers ASoC: simple-card: fix mic jack initialization iio: hi8435: avoid garbage event at first enable iio: hi8435: cleanup reset gpio iio: light: rpr0521 poweroff for probe fails ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors md-cluster: fix potential lock issue in add_new_disk ARM: davinci: da8xx: Create DSP device only when assigned memory ray_cs: Avoid reading past end of buffer net/wan/fsl_ucc_hdlc: fix muram allocation error leds: pca955x: Correct I2C Functionality perf/core: Fix error handling in perf_event_alloc() sched/numa: Use down_read_trylock() for the mmap_sem gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs net/mlx5: Tolerate irq_set_affinity_hint() failures selinux: do not check open permission on sockets block: fix an error code in add_partition() mlx5: fix bug reading rss_hash_type from CQE net: ieee802154: fix net_device reference release too early libceph: NULL deref on crush_decode() error path perf report: Fix off-by-one for non-activation frames netfilter: ctnetlink: fix incorrect nf_ct_put during hash resize pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() ASoC: rsnd: SSI PIO adjust to 24bit mode scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats() fix race in drivers/char/random.c:get_reg() ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff() ARM64: PCI: Fix struct acpi_pci_root_ops allocation failure path tcp: better validation of received ack sequences net: move somaxconn init from sysctl code Input: elan_i2c - clear INT before resetting controller bonding: Don't update slave->link until ready to commit cpuhotplug: Link lock stacks for hotplug callbacks PCI/msi: fix the pci_alloc_irq_vectors_affinity stub KVM: X86: Fix preempt the preemption timer cancel KVM: nVMX: Fix handling of lmsw instruction net: llc: add lock_sock in llc_ui_bind to avoid a race condition drm/msm: Take the mutex before calling msm_gem_new_impl i40iw: Fix sequence number for the first partial FPDU i40iw: Correct Q1/XF object count equation ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node thermal: power_allocator: fix one race condition issue for thermal_instances list perf probe: Add warning message if there is unexpected event name l2tp: fix missing print session offset info rds; Reset rs->rs_bound_addr in rds_add_bound() failure path ACPI / video: Default lcd_only to true on Win8-ready and newer machines net/mlx4_en: Change default QoS settings VFS: close race between getcwd() and d_move() PM / devfreq: Fix potential NULL pointer dereference in governor_store hwmon: (ina2xx) Make calibration register value fixed media: videobuf2-core: don't go out of the buffer range ASoC: Intel: Skylake: Disable clock gating during firmware and library download ASoC: Intel: cht_bsw_rt5645: Analog Mic support scsi: libiscsi: Allow sd_shutdown on bad transport scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. irqchip/gic-v3: Fix the driver probe() fail due to disabled GICC entry ACPI: EC: Fix debugfs_create_*() usage mac80211: Fix setting TX power on monitor interfaces vfb: fix video mode and line_length being set when loaded gpio: label descriptors using the device name IB/rdmavt: Allocate CQ memory on the correct node blk-mq: fix race between updating nr_hw_queues and switching io sched backlight: tdo24m: Fix the SPI CS between transfers pinctrl: baytrail: Enable glitch filter for GPIOs used as interrupts ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()' rt2x00: do not pause queue unconditionally on error path wl1251: check return from call to wl1251_acx_arp_ip_filter hdlcdrv: Fix divide by zero in hdlcdrv_ioctl x86/efi: Disable runtime services on kexec kernel if booted with efi=old_map netfilter: conntrack: don't call iter for non-confirmed conntracks HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices ovl: filter trusted xattr for non-admin powerpc/[booke|4xx]: Don't clobber TCR[WP] when setting TCR[DIE] dmaengine: imx-sdma: Handle return value of clk_prepare_enable backlight: Report error on failure arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage net/mlx5: avoid build warning for uniprocessor cxgb4: FW upgrade fixes cxgb4: Fix netdev_features flag rtc: m41t80: fix SQW dividers override when setting a date i40evf: fix merge error in older patch rtc: opal: Handle disabled TPO in opal_get_tpo_time() rtc: interface: Validate alarm-time before handling rollover SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() net: freescale: fix potential null pointer dereference clk: at91: fix clk-generated parenting drm/sun4i: Ignore the generic connectors for components dt-bindings: display: sun4i: Add allwinner,tcon-channel property mtd: nand: gpmi: Fix gpmi_nand_init() error path mtd: nand: check ecc->total sanity in nand_scan_tail KVM: SVM: do not zero out segment attributes if segment is unusable or not present clk: scpi: fix return type of __scpi_dvfs_round_rate clk: Fix __set_clk_rates error print-string powerpc/spufs: Fix coredump of SPU contexts drm/amdkfd: NULL dereference involving create_process() ath10k: add BMI parameters to fix calibration from DT/pre-cal perf trace: Add mmap alias for s390 qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and qlcnic_82xx_hw_read_wx_2M arm64: kernel: restrict /dev/mem read() calls to linear region mISDN: Fix a sleep-in-atomic bug net: phy: micrel: Restore led_mode and clk_sel on resume RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers RDMA/hfi1: fix array termination by appending NULL to attr array drm/omap: fix tiled buffer stride calculations powerpc/8xx: fix mpc8xx_get_irq() return on no irq cxgb4: fix incorrect cim_la output for T6 Fix serial console on SNI RM400 machines bio-integrity: Do not allocate integrity context for bio w/o data ip6_tunnel: fix traffic class routing for tunnels skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow macsec: check return value of skb_to_sgvec always sit: reload iphdr in ipip6_rcv net/mlx4: Fix the check in attaching steering rules net/mlx4: Check if Granular QoS per VF has been enabled before updating QP qos_vport perf header: Set proper module name when build-id event found perf report: Ensure the perf DSO mapping matches what libdw sees iwlwifi: mvm: fix firmware debug restart recording watchdog: f71808e_wdt: Add F71868 support iwlwifi: mvm: Fix command queue number on d0i3 flow iwlwifi: tt: move ucode_loaded check under mutex iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3 iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265 tags: honor COMPILED_SOURCE with apart output directory ARM: dts: qcom: ipq4019: fix i2c_0 node e1000e: fix race condition around skb_tstamp_tx() igb: fix race condition with PTP_TX_IN_PROGRESS bits cxl: Unlock on error in probe cx25840: fix unchecked return values mceusb: sporadic RX truncation corruption fix net: phy: avoid genphy_aneg_done() for PHYs without clause 22 support ARM: imx: Add MXC_CPU_IMX6ULL and cpu_is_imx6ull nvme-pci: fix multiple ctrl removal scheduling nvme: fix hang in remove path KVM: nVMX: Update vmcs12->guest_linear_address on nested VM-exit e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails perf/core: Correct event creation with PERF_FORMAT_GROUP sched/deadline: Use the revised wakeup rule for suspending constrained dl tasks MIPS: mm: fixed mappings: correct initialisation MIPS: mm: adjust PKMAP location MIPS: kprobes: flush_insn_slot should flush only if probe initialised ARM: dts: armadillo800eva: Split LCD mux and gpio Fix loop device flush before configure v3 net: emac: fix reset timeout with AR8035 phy perf tools: Decompress kernel module when reading DSO data perf tests: Decompress kernel module before objdump skbuff: only inherit relevant tx_flags xen: avoid type warning in xchg_xen_ulong X.509: Fix error code in x509_cert_parse() pinctrl: meson-gxbb: remove non-existing pin GPIOX_22 coresight: Fix reference count for software sources coresight: tmc: Configure DMA mask appropriately stmmac: fix ptp header for GMAC3 hw timestamp geneve: add missing rx stats accounting crypto: omap-sham - buffer handling fixes for hashing later crypto: omap-sham - fix closing of hash with separate finalize call bnx2x: Allow vfs to disable txvlan offload sctp: fix recursive locking warning in sctp_do_peeloff net: fec: Add a fec_enet_clear_ethtool_stats() stub for CONFIG_M5272 sparc64: ldc abort during vds iso boot iio: magnetometer: st_magn_spi: fix spi_device_id table net: ena: fix rare uncompleted admin command false alarm net: ena: fix race condition between submit and completion admin command net: ena: add missing return when ena_com_get_io_handlers() fails net: ena: add missing unmap bars on device removal net: ena: disable admin msix while working in polling mode clk: meson: meson8b: add compatibles for Meson8 and Meson8m2 Bluetooth: Send HCI Set Event Mask Page 2 command only when needed cpuidle: dt: Add missing 'of_node_put()' ACPICA: OSL: Add support to exclude stdarg.h ACPICA: Events: Add runtime stub support for event APIs ACPICA: Disassembler: Abort on an invalid/unknown AML opcode s390/dasd: fix hanging safe offline vxlan: dont migrate permanent fdb entries during learn hsr: fix incorrect warning selftests: kselftest_harness: Fix compile warning drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling path bcache: stop writeback thread after detaching bcache: segregate flash only volume write streams scsi: libsas: fix memory leak in sas_smp_get_phy_events() scsi: libsas: fix error when getting phy events scsi: libsas: initialize sas_phy status according to response of DISCOVER blk-mq: fix kernel oops in blk_mq_tag_idle() tty: n_gsm: Allow ADM response in addition to UA for control dlci EDAC, mv64x60: Fix an error handling path cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages sdhci: Advertise 2.0v supply on SDIO host controller Input: goodix - disable IRQs while suspended mtd: mtd_oobtest: Handle bitflips during reads perf tools: Fix copyfile_offset update of output offset ipsec: check return value of skb_to_sgvec always rxrpc: check return value of skb_to_sgvec always virtio_net: check return value of skb_to_sgvec always virtio_net: check return value of skb_to_sgvec in one more location random: use lockless method of accessing and updating f->reg_idx clk: at91: fix clk-generated compilation arp: fix arp_filter on l3slave devices ipv6: the entire IPv6 header chain must fit the first fragment net: fix possible out-of-bound read in skb_network_protocol() net/ipv6: Fix route leaking between VRFs net/ipv6: Increment OUTxxx counters after netfilter hook netlink: make sure nladdr has correct size in netlink_connect() net/sched: fix NULL dereference in the error path of tcf_bpf_init() pptp: remove a buggy dst release in pptp_connect() r8169: fix setting driver_data after register_netdev sctp: do not leak kernel memory to user space sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6 sky2: Increase D3 delay to sky2 stops working after suspend vhost: correctly remove wait queue during poll failure vlan: also check phy_driver ts_info for vlan's real device bonding: fix the err path for dev hwaddr sync in bond_enslave bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave bonding: process the err returned by dev_set_allmulti properly in bond_enslave net: fool proof dev_valid_name() ip_tunnel: better validate user provided tunnel names ipv6: sit: better validate user provided tunnel names ip6_gre: better validate user provided tunnel names ip6_tunnel: better validate user provided tunnel names vti6: better validate user provided tunnel names net/mlx5e: Sync netdev vxlan ports at open net/sched: fix NULL dereference in the error path of tunnel_key_init() net/sched: fix NULL dereference on the error path of tcf_skbmod_init() net/mlx4_en: Fix mixed PFC and Global pause user control requests vhost: validate log when IOTLB is enabled route: check sysctl_fib_multipath_use_neigh earlier than hash team: move dev_mc_sync after master_upper_dev_link in team_port_add vhost_net: add missing lock nesting notation net/mlx4_core: Fix memory leak while delete slave's resources strparser: Fix sign of err codes net sched actions: fix dumping which requires several messages to user space vrf: Fix use after free and double free in vrf_finish_output Revert "xhci: plat: Register shutdown for xhci_plat" Linux 4.9.94 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> |
||
|
Martin Blumenstingl
|
a81437a759 |
clk: meson: meson8b: add compatibles for Meson8 and Meson8m2
[ Upstream commit
|
||
|
Maxime Ripard
|
ed82ab87e1 |
dt-bindings: display: sun4i: Add allwinner,tcon-channel property
[ Upstream commit
|