commit c2d3115538 upstream.
When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd
twice. The first free is in vmw_fb_kms_detach(), the second is near the
end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code
only works correctly if the mode doesn't actually change. Removing
'old_mode' in favor of using par->set_mode directly fixes the problem.
Cc: <stable@vger.kernel.org>
Fixes: a278724aa2 ("drm/vmwgfx: Implement fbdev on kms v2")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc5034a5d2 upstream.
Add missing break statement in order to prevent the code from falling
through to case CB_TARGET_MASK.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: dd220a00e8 ("drm/radeon/kms: add support for streamout v7")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bb867d219f ]
The CSI offsets are wrong for both CSI0 and CSI1. They are at
physical address 0x1e030000 and 0x1e038000 respectively.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c0408dd0d ]
The CSI0/CSI1 registers offset is at +0xe030000/+0xe038000 relative
to the control module registers on IPUv3EX.
This patch fixes wrong values for i.MX51 CSI0/CSI1.
Fixes: 2ffd48f2e7 ("gpu: ipu-v3: Add Camera Sensor Interface unit")
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b14e945bda ]
When initializing clocks, a reference to the TCON channel 0 clock is
obtained. However, the clock is never prepared and enabled later.
Switching from simplefb to DRM actually disables the clock (that was
usually configured by U-Boot) because of that.
On the V3s, this results in a hang when writing to some mixer registers
when switching over to DRM from simplefb.
Fix this by preparing and enabling the clock when initializing other
clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is
apparently too late and results in the same mixer register access hang.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 41c32e5da3 upstream.
Use enum pipe for PCH transcoders also in the FIFO underrun code.
Fixes the following new sparse warnings:
intel_fifo_underrun.c:340:49: warning: mixing different enum types
intel_fifo_underrun.c:340:49: int enum pipe versus
intel_fifo_underrun.c:340:49: int enum transcoder
intel_fifo_underrun.c:344:49: warning: mixing different enum types
intel_fifo_underrun.c:344:49: int enum pipe versus
intel_fifo_underrun.c:344:49: int enum transcoder
intel_fifo_underrun.c:397:57: warning: mixing different enum types
intel_fifo_underrun.c:397:57: int enum pipe versus
intel_fifo_underrun.c:397:57: int enum transcoder
intel_fifo_underrun.c:398:17: warning: mixing different enum types
intel_fifo_underrun.c:398:17: int enum pipe versus
intel_fifo_underrun.c:398:17: int enum transcoder
Cc: Matthias Kaehlcke <mka@chromium.org>
Fixes: a21960339c ("drm/i915: Consistently use enum pipe for PCH transcoders")
Signed-off-by: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901143123.7590-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[nc: Backport to 4.9, drop unneeded hunks]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a21960339c upstream.
The current code uses in some instances enum transcoder for PCH
transcoders and enum pipe in others. This is error prone and clang
raises warnings like this:
drivers/gpu/drm/i915/intel_dp.c:3546:51: warning: implicit conversion
from enumeration type 'enum pipe' to different enumeration type
'enum transcoder' [-Wenum-conversion]
intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false);
Consistently use the type enum pipe for PCH transcoders.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170717181403.57324-1-mka@chromium.org
[nc: Backport to 4.9; adjust context and drop unneeded hunks]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9a63bd6fe1 ]
Initially DP0_SRCCTRL is set to a static value which includes
DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of
1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number.
This patch changes the configuration as follows:
Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct
value.
DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL:
SSCG and BW27. All other bits can be zero.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 728354c005 upstream.
The function was unconditionally returning 0, and a caller would have to
rely on the returned fence pointer being NULL to detect errors. However,
the function vmw_execbuf_copy_fence_user() would expect a non-zero error
code in that case and would BUG otherwise.
So make sure we return a proper non-zero error code if the fence pointer
returned is NULL.
Cc: <stable@vger.kernel.org>
Fixes: ae2a104058: ("vmwgfx: Implement fence objects")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4cbfa1e6c0 upstream.
Previously we set only the dma mask and not the coherent mask. Fix that.
Also, for clarity, make sure both are initially set to 64 bits.
Cc: <stable@vger.kernel.org>
Fixes: 0d00c488f3: ("drm/vmwgfx: Fix the driver for large dma addresses")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0560054da5 ]
For the YUV conversion to work properly, ->x_scaling[1] should never
be set to VC4_SCALING_NONE, but vc4_get_scaling_mode() might return
VC4_SCALING_NONE if the horizontal scaling ratio exactly matches the
horizontal subsampling factor. Add a test to turn VC4_SCALING_NONE
into VC4_SCALING_PPF when that happens.
The old ->x_scaling[0] adjustment is dropped as I couldn't find any
mention to this constraint in the spec and it's proven to be
unnecessary (I tested various multi-planar YUV formats with scaling
disabled, and all of them worked fine without this adjustment).
Fixes: fc04023faf ("drm/vc4: Add support for YUV planes.")
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109102633.32603-1-boris.brezillon@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 819bec35c8 ]
Prevent possible race by parallel threads between ipu_image_convert_run()
and ipu_image_convert_unprepare(). This involves setting ctx->aborting
to true unconditionally so that no new job runs can be queued during
unprepare, and holding the ctx->aborting flag until the context is freed.
Note that the "normal" ipu_image_convert_abort() case (e.g. not during
context unprepare) should clear the ctx->aborting flag after aborting
any active run and clearing the context's pending queue. This is because
it should be possible to continue to use the conversion context and queue
more runs after an abort.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a378050989 ]
idx can be indirectly controlled by user-space, hence leading to a
potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/gpu/drm/drm_bufs.c:1420 drm_legacy_freebufs() warn: potential
spectre issue 'dma->buflist' [r] (local cap)
Fix this by sanitizing idx before using it to index dma->buflist
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016095549.GA23586@embeddedor.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 66a8d5bfb5 upstream.
Strict requirement of pixclock to be zero breaks support of SDL 1.2
which contains hardcoded table of supported video modes with non-zero
pixclock values[1].
To better understand which pixclock values are considered valid and how
driver should handle these values, I briefly examined few existing fbdev
drivers and documentation in Documentation/fb/. And it looks like there
are no strict rules on that and actual behaviour varies:
* some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c);
* some treat (pixclock == 0) as invalid value which leads to
-EINVAL (clps711x-fb.c);
* some pass converted pixclock value to hardware (uvesafb.c);
* some are trying to find nearest value from predefined table
(vga16fb.c, video_gx.c).
Given this, I believe that it should be safe to just ignore this value if
changing is not supported. It seems that any portable fbdev application
which was not written only for one specific device working under one
specific kernel version should not rely on any particular behaviour of
pixclock anyway.
However, while enabling SDL1 applications to work out of the box when
there is no /etc/fb.modes with valid settings, this change affects the
video mode choosing logic in SDL. Depending on current screen
resolution, contents of /etc/fb.modes and resolution requested by
application, this may lead to user-visible difference (not always):
image will be displayed in a right way, but it will be aligned to the
left instead of center. There is no "right behaviour" here as well, as
emulated fbdev, opposing to old fbdev drivers, simply ignores any
requsts of video mode changes with resolutions smaller than current.
The easiest way to reproduce this problem is to install sdl-sopwith[2],
remove /etc/fb.modes file if it exists, and then try to run sopwith
from console without X. At least in Fedora 29, sopwith may be simply
installed from standard repositories.
[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings
[2] http://sdl-sopwith.sourceforge.net/
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 79e539453b ("DRM: i915: add mode setting support")
Fixes: 771fe6b912 ("drm/radeon: introduce kernel modesetting for radeon hardware")
Fixes: 785b93ef8c ("drm/kms: move driver specific fb common code to helper functions (v2)")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-3-mironov.ivan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 505b524032 upstream.
nr is indirectly controlled by user-space, hence leading to a
potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/gpu/drm/drm_ioctl.c:805 drm_ioctl() warn: potential spectre issue 'dev->driver->ioctls' [r]
drivers/gpu/drm/drm_ioctl.c:810 drm_ioctl() warn: potential spectre issue 'drm_ioctls' [r] (local cap)
drivers/gpu/drm/drm_ioctl.c:892 drm_ioctl_flags() warn: potential spectre issue 'drm_ioctls' [r] (local cap)
Fix this by sanitizing nr before using it to index dev->driver->ioctls
and drm_ioctls.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181220000015.GA18973@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3b712e43e3 ]
Similar to the atomic helpers, we should enable vblank while we're
waiting for the commit to finish. DPU needs this, MDP5 seems to work
fine without it.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 63238173b2 upstream.
This reverts commit 7f3ef5dedb.
It causes new warnings [1] on shutdown when running the Google Kevin or
Scarlet (RK3399) boards under Chrome OS. Presumably our usage of DRM is
different than what Marc and Heiko test.
We're looking at a different approach (e.g., [2]) to replace this, but
IMO the revert should be taken first, as it already propagated to
-stable.
[1] Report here:
http://lkml.kernel.org/lkml/20181205030127.GA200921@google.com
WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x1c4/0x294
...
Call trace:
drm_mode_config_cleanup+0x1c4/0x294
rockchip_drm_unbind+0x4c/0x8c
component_master_del+0x88/0xb8
rockchip_drm_platform_remove+0x2c/0x44
rockchip_drm_platform_shutdown+0x20/0x2c
platform_drv_shutdown+0x2c/0x38
device_shutdown+0x164/0x1b8
kernel_restart_prepare+0x40/0x48
kernel_restart+0x20/0x68
...
Memory manager not clean during takedown.
WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mm.c:950 drm_mm_takedown+0x34/0x44
...
drm_mm_takedown+0x34/0x44
rockchip_drm_unbind+0x64/0x8c
component_master_del+0x88/0xb8
rockchip_drm_platform_remove+0x2c/0x44
rockchip_drm_platform_shutdown+0x20/0x2c
platform_drv_shutdown+0x2c/0x38
device_shutdown+0x164/0x1b8
kernel_restart_prepare+0x40/0x48
kernel_restart+0x20/0x68
...
[2] https://patchwork.kernel.org/patch/10556151/https://www.spinics.net/lists/linux-rockchip/msg21342.html
[PATCH] drm/rockchip: shutdown drm subsystem on shutdown
Fixes: 7f3ef5dedb ("drm/rockchip: Allow driver to be shutdown on reboot/kexec")
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Vicente Bergas <vicencb@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: stable@vger.kernel.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205181657.177703-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ceff2f4dcd upstream.
Use the new of_get_compatible_child() helper to lookup the sibling
instead of using of_find_compatible_node(), which searches the entire
tree from a given start node and thus can return an unrelated (i.e.
non-sibling) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent device node).
While at it, also fix the related cec-node reference leak.
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Cc: stable <stable@vger.kernel.org> # 4.8
Cc: Junzhi Zhao <junzhi.zhao@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
[ johan: backport to 4.9 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
