[ Upstream commit 93f65ce036 ]
I expect that the hardware will have limited this to 16, but just in
case it hasn't, check for this corner case.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Clang warns:
drivers/staging/android/ion/ion-ioctl.c:71:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (--handle->user_ref_count == 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/android/ion/ion-ioctl.c:74:9: note: uninitialized use occurs here
return ret;
^~~
drivers/staging/android/ion/ion-ioctl.c:71:2: note: remove the 'if' if its condition is always true
if (--handle->user_ref_count == 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/android/ion/ion-ioctl.c:69:9: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
1 warning generated.
The return value of user_ion_handle_put_nolock() is not checked in its
one call site in user_ion_free_nolock() so just make
user_ion_handle_put_nolock() return void to remove the warning.
Fixes: a8200613c8 ("ion: Protect kref from userspace manipulation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9b6bdbd933 ]
There is a deadlock in rtllib_beacons_stop(), which is shown
below:
(Thread 1) | (Thread 2)
| rtllib_send_beacon()
rtllib_beacons_stop() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | rtllib_send_beacon_cb()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold ieee->beacon_lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need ieee->beacon_lock in position (2) of thread 2.
As a result, rtllib_beacons_stop() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417141641.124388-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
pass_to_user() eventually calls kref_put() on an ION handle which is
still live, potentially allowing for it to be legitimately freed by
the client.
Prevent this from happening before its final use in both ION_IOC_ALLOC
and ION_IOC_IMPORT.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This separates the kref for ion handles into two components.
Userspace requests through the ioctl will hold at most one
reference to the internally used kref. All additional requests
will increment a separate counter, and the original reference is
only put once that counter hits 0. This protects the kernel from
a poorly behaving userspace.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[d-cagle@codeaurora.org: Resolve style issues]
Signed-off-by: Dennis Cagle <d-cagle@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a user happens to call ION_IOC_FREE during an ION_IOC_ALLOC
on the just allocated id, and the copy_to_user fails, the cleanup
code will attempt to free an already freed handle.
This adds a wrapper for ion_alloc that adds an ion_handle_get to
avoid this.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Dennis Cagle <d-cagle@codeaurora.org>
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 502408a61f upstream.
A new warning in clang points out a place in this file where a bitwise
OR is being used with boolean expressions:
In file included from drivers/staging/wlan-ng/prism2usb.c:2:
drivers/staging/wlan-ng/hfa384x_usb.c:3787:7: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
((test_and_clear_bit(THROTTLE_RX, &hw->usb_flags) &&
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/wlan-ng/hfa384x_usb.c:3787:7: note: cast one or both operands to int to silence this warning
1 warning generated.
The comment explains that short circuiting here is undesirable, as the
calls to test_and_{clear,set}_bit() need to happen for both sides of the
expression.
Clang's suggestion would work to silence the warning but the readability
of the expression would suffer even more. To clean up the warning and
make the block more readable, use a variable for each side of the
bitwise expression.
Link: https://github.com/ClangBuiltLinux/linux/issues/1478
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211014215703.3705371-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a56d3e40bd upstream.
USB bulk and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.
Note that the bulk-out transfer timeout was set to the endpoint
bInterval value, which should be ignored for bulk endpoints and is
typically set to zero. This meant that a failing bulk-out transfer
would never time out.
Assume that the 10 second timeout used for all other transfers is more
than enough also for the bulk-out endpoint.
Fixes: 985cafccbf ("Staging: Comedi: vmk80xx: Add k8061 support")
Fixes: 951348b377 ("staging: comedi: vmk80xx: wait for URBs to complete")
Cc: stable@vger.kernel.org # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211025114532.4599-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a23461c474 upstream.
The driver uses endpoint-sized USB transfer buffers but up until
recently had no sanity checks on the sizes.
Commit e1f13c879a ("staging: comedi: check validity of wMaxPacketSize
of usb endpoints found") inadvertently fixed NULL-pointer dereferences
when accessing the transfer buffers in case a malicious device has a
zero wMaxPacketSize.
Make sure to allocate buffers large enough to handle also the other
accesses that are done without a size check (e.g. byte 18 in
vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond
the buffers, for example, when doing descriptor fuzzing.
The original driver was for a low-speed device with 8-byte buffers.
Support was later added for a device that uses bulk transfers and is
presumably a full-speed device with a maximum 64-byte wMaxPacketSize.
Fixes: 985cafccbf ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc: stable@vger.kernel.org # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211025114532.4599-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 536de747bc upstream.
USB transfer buffers are typically mapped for DMA and must not be
allocated on the stack or transfers will fail.
Allocate proper transfer buffers in the various command helpers and
return an error on short transfers instead of acting on random stack
data.
Note that this also fixes a stack info leak on systems where DMA is not
used as 32 bytes are always sent to the device regardless of how short
the command is.
Fixes: 63274cd7d3 ("Staging: comedi: add usb dt9812 driver")
Cc: stable@vger.kernel.org # 2.6.29
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211027093529.30896-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: commit e7f63771b6 ("ION: Sys_heap: Add cached pool to spead up cached buffer alloc")
the commit e7f63771b6 introduced the bug which didn't test page which maybe NULL.
and previous logic was right.
the e7f63771b6 has been merged in v4.8-rc3, only longterm 4.9.x has this bug,
and other longterm/stable version have not.
kernel panic is here when page is NULL:
Unable to handle kernel paging request at virtual address b0380000
pgd = d9d94000
[b0380000] *pgd=00000000
Internal error: Oops: 2805 [#1] PREEMPT SMP ARM
...
task: daa2dd00 task.stack: da194000
PC is at v7_dma_clean_range+0x1c/0x34
LR is at arm_dma_sync_single_for_device+0x44/0x58
pc : [<c011aa0c>] lr : [<c011645c>] psr: 200f0013
sp : da195da0 ip : dc1f9000 fp : c1043dc4
r10: 00000000 r9 : c16f1f58 r8 : 00000001
r7 : c1621f94 r6 : c0116418 r5 : 00000000 r4 : c011aa58
r3 : 0000003f r2 : 00000040 r1 : b0480000 r0 : b0380000
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5383d Table: 19d9406a DAC: 00000051
...
[<c011aa0c>] (v7_dma_clean_range) from [<c011645c>] (arm_dma_sync_single_for_device+0x44/0x58)
[<c011645c>] (arm_dma_sync_single_for_device) from [<c0117088>] (arm_dma_sync_sg_for_device+0x50/0x7c)
[<c0117088>] (arm_dma_sync_sg_for_device) from [<c0c033c4>] (ion_pages_sync_for_device+0xb0/0xec)
[<c0c033c4>] (ion_pages_sync_for_device) from [<c0c054ac>] (ion_system_heap_allocate+0x2a0/0x2e0)
[<c0c054ac>] (ion_system_heap_allocate) from [<c0c02c78>] (ion_alloc+0x12c/0x494)
[<c0c02c78>] (ion_alloc) from [<c0c03eac>] (ion_ioctl+0x510/0x63c)
[<c0c03eac>] (ion_ioctl) from [<c027c4b0>] (do_vfs_ioctl+0xa8/0x9b4)
[<c027c4b0>] (do_vfs_ioctl) from [<c027ce28>] (SyS_ioctl+0x6c/0x7c)
[<c027ce28>] (SyS_ioctl) from [<c0108a40>] (ret_fast_syscall+0x0/0x48)
Code: e3a02004 e1a02312 e2423001 e1c00003 (ee070f3a)
---[ end trace 89278304932c0e87 ]---
Kernel panic - not syncing: Fatal exception
Signed-off-by: Cheng Chao <cs.os.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit df00609821 ]
On Armadillo-800-EVA with CONFIG_DEBUG_SPINLOCK=y:
BUG: spinlock bad magic on CPU#0, swapper/1
lock: lcdc0_device+0x10c/0x308, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 0 PID: 1 Comm: swapper Not tainted 5.11.0-rc5-armadillo-00036-gbbca04be7a80-dirty #287
Hardware name: Generic R8A7740 (Flattened Device Tree)
[<c010c3c8>] (unwind_backtrace) from [<c010a49c>] (show_stack+0x10/0x14)
[<c010a49c>] (show_stack) from [<c0159534>] (do_raw_spin_lock+0x20/0x94)
[<c0159534>] (do_raw_spin_lock) from [<c040858c>] (dev_pm_get_subsys_data+0x8c/0x11c)
[<c040858c>] (dev_pm_get_subsys_data) from [<c05fbcac>] (genpd_add_device+0x78/0x2b8)
[<c05fbcac>] (genpd_add_device) from [<c0412db4>] (of_genpd_add_device+0x34/0x4c)
[<c0412db4>] (of_genpd_add_device) from [<c0a1ea74>] (board_staging_register_device+0x11c/0x148)
[<c0a1ea74>] (board_staging_register_device) from [<c0a1eac4>] (board_staging_register_devices+0x24/0x28)
of_genpd_add_device() is called before platform_device_register(), as it
needs to attach the genpd before the device is probed. But the spinlock
is only initialized when the device is registered.
Fix this by open-coding the spinlock initialization, cfr.
device_pm_init_common() in the internal drivers/base code, and in the
SuperH early platform code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/57783ece7ddae55f2bda2f59f452180bff744ea0.1626257398.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
