shinys000114/linux
1
0
Fork 0
mirror of https://github.com/hardkernel/linux.git synced 2026-04-17 11:00:43 +09:00
Code Issues Packages Projects Releases Wiki Activity
Files
aa2d99e76ecc618bb0c05d64bda77790703fa0c4
linux/drivers/input/touchscreen/Kconfig
phc 01f63ae118 Z5 Support In 3.0
2011-12-01 20:55:12 +08:00

1020 lines
28 KiB
Plaintext
Raw Blame History

#
# Touchscreen driver configuration
#
menuconfig INPUT_TOUCHSCREEN
bool "Touchscreens"
help
Say Y here, and a list of supported touchscreens will be displayed.
This option doesn't affect the kernel.
If unsure, say Y.
if INPUT_TOUCHSCREEN
config TOUCHSCREEN_XPT2046_SPI
tristate "XPT2046 based touchscreens:SPI Interface"
depends on SPIM_RK29
config TOUCHSCREEN_XPT2046_NORMAL_SPI
tristate "normal mode"
depends on TOUCHSCREEN_XPT2046_SPI
config TOUCHSCREEN_480X800
tristate "480X800 resolution"
depends on TOUCHSCREEN_XPT2046_NORMAL_SPI
config TOUCHSCREEN_800X480
tristate "800X480 resolution"
depends on TOUCHSCREEN_XPT2046_NORMAL_SPI
config TOUCHSCREEN_320X480
tristate "320X480 resolution"
depends on TOUCHSCREEN_XPT2046_NORMAL_SPI
config TOUCHSCREEN_XPT2046_TSLIB_SPI
tristate "tslib mode"
depends on TOUCHSCREEN_XPT2046_SPI
config TOUCHSCREEN_480X800
tristate "480X800 resolution"
depends on TOUCHSCREEN_XPT2046_TSLIB_SPI
config TOUCHSCREEN_800X480
tristate "800X480 resolution"
depends on TOUCHSCREEN_XPT2046_TSLIB_SPI
config TOUCHSCREEN_320X480
tristate "320X480 resolution"
depends on TOUCHSCREEN_XPT2046_TSLIB_SPI
config TOUCHSCREEN_XPT2046_CBN_SPI
tristate "calibration mode"
depends on TOUCHSCREEN_XPT2046_SPI
config TOUCHSCREEN_480X800
tristate "480X800 resolution"
depends on TOUCHSCREEN_XPT2046_CBN_SPI
config TOUCHSCREEN_800X480
tristate "800X480 resolution"
depends on TOUCHSCREEN_XPT2046_CBN_SPI
config TOUCHSCREEN_320X480
tristate "320X480 resolution"
depends on TOUCHSCREEN_XPT2046_CBN_SPI
config TOUCHSCREEN_88PM860X
tristate "Marvell 88PM860x touchscreen"
depends on MFD_88PM860X
help
Say Y here if you have a 88PM860x PMIC and want to enable
support for the built-in touchscreen.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called 88pm860x-ts.
config TOUCHSCREEN_ADS7846
tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
depends on SPI_MASTER
depends on HWMON = n || HWMON
help
Say Y here if you have a touchscreen interface using the
ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
and your board-specific setup code includes that in its
table of SPI devices.
If HWMON is selected, and the driver is told the reference voltage
on your board, you will also get hwmon interfaces for the voltage
(and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
module will be called ads7846.
config TOUCHSCREEN_AD7877
tristate "AD7877 based touchscreens"
depends on SPI_MASTER
help
Say Y here if you have a touchscreen interface using the
AD7877 controller, and your board-specific initialization
code includes that in its table of SPI devices.
If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
module will be called ad7877.
config TOUCHSCREEN_ILI2102_IIC
tristate "ili2102 based touchscreens: IIC Interface"
help
Say Y here if you have a touchscreen interface using the
hx8520 controller, and your board-specific initialization
code includes that in its table of IIC devices.
If unsure, say N (but it's safe to say "Y").
config TOUCHSCREEN_GT8XX
tristate "Goodix touch screen gt8xx support for rk29"
help
Say Y here if you have a touchscreen interface using the
goodix gt8xx , and your board-specific initialization
code includes that in its table of IIC devices.
If unsure, say N (but it's safe to say "Y").
config RK28_I2C_TS_NTP070
tristate "NTP070 based touchscreens: NTP070 Interface"
depends on I2C_RK2818
config TOUCHSCREEN_IT7250
tristate "IT7250 based touchscreens: IT7250 Interface"
help
Say Y here if you have a touchscreen interface using the
xpt2046 controller, and your board-specific initialization
code includes that in its table of SPI devices.
If unsure, say N (but it's safe to say "Y").
config TOUCHSCREEN_AD7879
tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
help
Say Y here if you want to support a touchscreen interface using
the AD7879-1/AD7889-1 controller.
You should select a bus connection too.
To compile this driver as a module, choose M here: the
module will be called ad7879.
config TOUCHSCREEN_AD7879_I2C
tristate "support I2C bus connection"
depends on TOUCHSCREEN_AD7879 && I2C
help
Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
To compile this driver as a module, choose M here: the
module will be called ad7879-i2c.
config TOUCHSCREEN_AD7879_SPI
tristate "support SPI bus connection"
depends on TOUCHSCREEN_AD7879 && SPI_MASTER
help
Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
module will be called ad7879-spi.
config TOUCHSCREEN_ATMEL_MXT
tristate "Atmel mXT I2C Touchscreen"
depends on I2C
help
Say Y here if you have Atmel mXT series I2C touchscreen,
such as AT42QT602240/ATMXT224, connected to your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called atmel_mxt_ts.
config TOUCHSCREEN_BITSY
tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
depends on SA1100_BITSY
select SERIO
help
Say Y here if you have the h3600 (Bitsy) touchscreen.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called h3600_ts_input.
config TOUCHSCREEN_BU21013
tristate "BU21013 based touch panel controllers"
depends on I2C
help
Say Y here if you have a bu21013 touchscreen connected to
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called bu21013_ts.
config TOUCHSCREEN_CY8CTMG110
tristate "cy8ctmg110 touchscreen"
depends on I2C
depends on GPIOLIB
help
Say Y here if you have a cy8ctmg110 capacitive touchscreen on
an AAVA device.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called cy8ctmg110_ts.
config TOUCHSCREEN_DA9034
tristate "Touchscreen support for Dialog Semiconductor DA9034"
depends on PMIC_DA903X
default y
help
Say Y here to enable the support for the touchscreen found
on Dialog Semiconductor DA9034 PMIC.
config TOUCHSCREEN_DYNAPRO
tristate "Dynapro serial touchscreen"
select SERIO
help
Say Y here if you have a Dynapro serial touchscreen connected to
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called dynapro.
config TOUCHSCREEN_HAMPSHIRE
tristate "Hampshire serial touchscreen"
select SERIO
help
Say Y here if you have a Hampshire serial touchscreen connected to
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called hampshire.
config TOUCHSCREEN_EETI
tristate "EETI touchscreen panel support"
depends on I2C
help
Say Y here to enable support for I2C connected EETI touch panels.
To compile this driver as a module, choose M here: the
module will be called eeti_ts.
config TOUCHSCREEN_FUJITSU
tristate "Fujitsu serial touchscreen"
select SERIO
help
Say Y here if you have the Fujitsu touchscreen (such as one
installed in Lifebook P series laptop) connected to your
system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called fujitsu-ts.
config TOUCHSCREEN_S3C2410
tristate "Samsung S3C2410/generic touchscreen input driver"
depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
select S3C_ADC
help
Say Y here if you have the s3c2410 touchscreen.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called s3c2410_ts.
config TOUCHSCREEN_GUNZE
tristate "Gunze AHL-51S touchscreen"
select SERIO
help
Say Y here if you have the Gunze AHL-51 touchscreen connected to
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called gunze.
config TOUCHSCREEN_ELO
tristate "Elo serial touchscreens"
select SERIO
help
Say Y here if you have an Elo serial touchscreen connected to
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called elo.
config TOUCHSCREEN_WACOM_W8001
tristate "Wacom W8001 penabled serial touchscreen"
select SERIO
help
Say Y here if you have an Wacom W8001 penabled serial touchscreen
connected to your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called wacom_w8001.
config TOUCHSCREEN_LPC32XX
tristate "LPC32XX touchscreen controller"
depends on ARCH_LPC32XX
help
Say Y here if you have a LPC32XX device and want
to support the built-in touchscreen.
To compile this driver as a module, choose M here: the
module will be called lpc32xx_ts.
config TOUCHSCREEN_MAX11801
tristate "MAX11801 based touchscreens"
depends on I2C
help
Say Y here if you have a MAX11801 based touchscreen
controller.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called max11801_ts.
config TOUCHSCREEN_MCS5000
tristate "MELFAS MCS-5000 touchscreen"
depends on I2C
help
Say Y here if you have the MELFAS MCS-5000 touchscreen controller
chip in your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called mcs5000_ts.
config TOUCHSCREEN_MTOUCH
tristate "MicroTouch serial touchscreens"
select SERIO
help
Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called mtouch.
config TOUCHSCREEN_INEXIO
tristate "iNexio serial touchscreens"
select SERIO
help
Say Y here if you have an iNexio serial touchscreen connected to
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called inexio.
config TOUCHSCREEN_INTEL_MID
tristate "Intel MID platform resistive touchscreen"
depends on INTEL_SCU_IPC
help
Say Y here if you have a Intel MID based touchscreen in
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called intel_mid_touch.
config TOUCHSCREEN_MK712
tristate "ICS MicroClock MK712 touchscreen"
help
Say Y here if you have the ICS MicroClock MK712 touchscreen
controller chip in your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called mk712.
config TOUCHSCREEN_HP600
tristate "HP Jornada 6xx touchscreen"
depends on SH_HP6XX && SH_ADC
help
Say Y here if you have a HP Jornada 620/660/680/690 and want to
support the built-in touchscreen.
To compile this driver as a module, choose M here: the
module will be called hp680_ts_input.
config TOUCHSCREEN_HP7XX
tristate "HP Jornada 7xx touchscreen"
depends on SA1100_JORNADA720_SSP
help
Say Y here if you have a HP Jornada 710/720/728 and want
to support the built-in touchscreen.
To compile this driver as a module, choose M here: the
module will be called jornada720_ts.
config TOUCHSCREEN_HTCPEN
tristate "HTC Shift X9500 touchscreen"
depends on ISA
help
Say Y here if you have an HTC Shift UMPC also known as HTC X9500
Clio / Shangrila and want to support the built-in touchscreen.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called htcpen.
config TOUCHSCREEN_PENMOUNT
tristate "Penmount serial touchscreen"
select SERIO
help
Say Y here if you have a Penmount serial touchscreen connected to
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called penmount.
config TOUCHSCREEN_MIGOR
tristate "Renesas MIGO-R touchscreen"
depends on SH_MIGOR && I2C
help
Say Y here to enable MIGO-R touchscreen support.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called migor_ts.
config TOUCHSCREEN_TNETV107X
tristate "TI TNETV107X touchscreen support"
depends on ARCH_DAVINCI_TNETV107X
help
Say Y here if you want to use the TNETV107X touchscreen.
To compile this driver as a module, choose M here: the
module will be called tnetv107x-ts.
config TOUCHSCREEN_SYNAPTICS_I2C_RMI
tristate "Synaptics i2c touchscreen"
depends on I2C
help
This enables support for Synaptics RMI over I2C based touchscreens.
config TOUCHSCREEN_TOUCHRIGHT
tristate "Touchright serial touchscreen"
select SERIO
help
Say Y here if you have a Touchright serial touchscreen connected to
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called touchright.
config TOUCHSCREEN_TOUCHWIN
tristate "Touchwin serial touchscreen"
select SERIO
help
Say Y here if you have a Touchwin serial touchscreen connected to
your system.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called touchwin.
config TOUCHSCREEN_ATMEL_TSADCC
tristate "Atmel Touchscreen Interface"
depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
help
Say Y here if you have a 4-wire touchscreen connected to the
ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called atmel_tsadcc.
config TOUCHSCREEN_UCB1400
tristate "Philips UCB1400 touchscreen"
depends on AC97_BUS
depends on UCB1400_CORE
help
This enables support for the Philips UCB1400 touchscreen interface.
The UCB1400 is an AC97 audio codec. The touchscreen interface
will be initialized only after the ALSA subsystem has been
brought up and the UCB1400 detected. You therefore have to
configure ALSA support as well (either built-in or modular,
independently of whether this driver is itself built-in or
modular) for this driver to work.
To compile this driver as a module, choose M here: the
module will be called ucb1400_ts.
config TOUCHSCREEN_WM831X
tristate "Support for WM831x touchscreen controllers"
depends on MFD_WM831X
help
This enables support for the touchscreen controller on the WM831x
series of PMICs.
To compile this driver as a module, choose M here: the
module will be called wm831x-ts.
config TOUCHSCREEN_WM97XX
tristate "Support for WM97xx AC97 touchscreen controllers"
depends on AC97_BUS
help
Say Y here if you have a Wolfson Microelectronics WM97xx
touchscreen connected to your system. Note that this option
only enables core driver, you will also need to select
support for appropriate chip below.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called wm97xx-ts.
config TOUCHSCREEN_WM9705
bool "WM9705 Touchscreen interface support"
depends on TOUCHSCREEN_WM97XX
default y
help
Say Y here to enable support for the Wolfson Microelectronics
WM9705 touchscreen controller.
config TOUCHSCREEN_WM9712
bool "WM9712 Touchscreen interface support"
depends on TOUCHSCREEN_WM97XX
default y
help
Say Y here to enable support for the Wolfson Microelectronics
WM9712 touchscreen controller.
config TOUCHSCREEN_WM9713
bool "WM9713 Touchscreen interface support"
depends on TOUCHSCREEN_WM97XX
default y
help
Say Y here to enable support for the Wolfson Microelectronics
WM9713 touchscreen controller.
config TOUCHSCREEN_WM97XX_ATMEL
tristate "WM97xx Atmel accelerated touch"
depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
help
Say Y here for support for streaming mode with WM97xx touchscreens
on Atmel AT91 or AVR32 systems with an AC97C module.
Be aware that this will use channel B in the controller for
streaming data, this must not conflict with other AC97C drivers.
If unsure, say N.
To compile this driver as a module, choose M here: the module will
be called atmel-wm97xx.
config TOUCHSCREEN_WM97XX_MAINSTONE
tristate "WM97xx Mainstone/Palm accelerated touch"
depends on TOUCHSCREEN_WM97XX && ARCH_PXA
help
Say Y here for support for streaming mode with WM97xx touchscreens
on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called mainstone-wm97xx.
config TOUCHSCREEN_WM97XX_ZYLONITE
tristate "Zylonite accelerated touch"
depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
select TOUCHSCREEN_WM9713
help
Say Y here for support for streaming mode with the touchscreen
on Zylonite systems.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called zylonite-wm97xx.
config TOUCHSCREEN_USB_COMPOSITE
tristate "USB Touchscreen Driver"
depends on USB_ARCH_HAS_HCD
select USB
help
USB Touchscreen driver for:
- eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
- PanJit TouchSet USB
- 3M MicroTouch USB (EX II series)
- ITM
- some other eTurboTouch
- Gunze AHL61
- DMC TSC-10/25
- IRTOUCHSYSTEMS/UNITOP
- IdealTEK URTC1000
- GoTop Super_Q2/GogoPen/PenPower tablets
- JASTEC USB Touch Controller/DigiTech DTR-02U
- Zytronic controllers
Have a look at <http://linux.chapter7.ch/touchkit/> for
a usage description and the required user-space stuff.
To compile this driver as a module, choose M here: the
module will be called usbtouchscreen.
config TOUCHSCREEN_MC13783
tristate "Freescale MC13783 touchscreen input driver"
depends on MFD_MC13783
help
Say Y here if you have an Freescale MC13783 PMIC on your
board and want to use its touchscreen
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called mc13783_ts.
config TOUCHSCREEN_USB_EGALAX
default y
bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_PANJIT
default y
bool "PanJit device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_3M
default y
bool "3M/Microtouch EX II series device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_ITM
default y
bool "ITM device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_ETURBO
default y
bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_GUNZE
default y
bool "Gunze AHL61 device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_DMC_TSC10
default y
bool "DMC TSC-10/25 device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_IRTOUCH
default y
bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_IDEALTEK
default y
bool "IdealTEK URTC1000 device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_GENERAL_TOUCH
default y
bool "GeneralTouch Touchscreen device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_GOTOP
default y
bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_JASTEC
default y
bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_E2I
default y
bool "e2i Touchscreen controller (e.g. from Mimo 740)"
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_ZYTRONIC
default y
bool "Zytronic controller" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_ETT_TC45USB
default y
bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_NEXIO
default y
bool "NEXIO/iNexio device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_TOUCHIT213
tristate "Sahara TouchIT-213 touchscreen"
select SERIO
help
Say Y here if you have a Sahara TouchIT-213 Tablet PC.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called touchit213.
config TOUCHSCREEN_TSC2005
tristate "TSC2005 based touchscreens"
depends on SPI_MASTER && GENERIC_HARDIRQS
help
Say Y here if you have a TSC2005 based touchscreen.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called tsc2005.
config TOUCHSCREEN_TSC2007
tristate "TSC2007 based touchscreens"
depends on I2C
help
Say Y here if you have a TSC2007 based touchscreen.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called tsc2007.
config TOUCHSCREEN_W90X900
tristate "W90P910 touchscreen driver"
depends on HAVE_CLK
help
Say Y here if you have a W90P910 based touchscreen.
To compile this driver as a module, choose M here: the
module will be called w90p910_ts.
config TOUCHSCREEN_PCAP
tristate "Motorola PCAP touchscreen"
depends on EZX_PCAP
help
Say Y here if you have a Motorola EZX telephone and
want to enable support for the built-in touchscreen.
To compile this driver as a module, choose M here: the
module will be called pcap_ts.
config TOUCHSCREEN_ST1232
tristate "Sitronix ST1232 touchscreen controllers"
depends on I2C
help
Say Y here if you want to support Sitronix ST1232
touchscreen controller.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called st1232_ts.
config TOUCHSCREEN_STMPE
tristate "STMicroelectronics STMPE touchscreens"
depends on MFD_STMPE
help
Say Y here if you want support for STMicroelectronics
STMPE touchscreen controllers.
To compile this driver as a module, choose M here: the
module will be called stmpe-ts.
config TOUCHSCREEN_TPS6507X
tristate "TPS6507x based touchscreens"
depends on I2C
help
Say Y here if you have a TPS6507x based touchscreen
controller.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called tps6507x_ts.
config HANNSTAR_P1003
tristate "Hannstar P1003 touchscreen"
depends on I2C2_RK29
help
RK29 hannstar touch
config HANNSTAR_MAX_X
int "hannstar touch x max"
depends on HANNSTAR_P1003
default 1087
help
RK29 hannstar touch max X size
config HANNSTAR_MAX_Y
int "hannstar touch Y max"
depends on HANNSTAR_P1003
default 800
help
RK29 hannstar touch max Y size
config HANNSTAR_DEBUG
bool "hannstar debug"
depends on HANNSTAR_P1003
default n
help
RK29 hannstar touch debug
config ATMEL_MXT224
tristate "Atmel mXT224 touchscreen"
depends on I2C2_RK29
help
RK29 Atmel_mXT224 touch
config MXT224_MAX_X
int "atmel_mxt224 touch X max"
depends on ATMEL_MXT224
default 4095
help
RK29 atmel_mxt224 touch max X size
config MXT224_MAX_Y
int "atmel_mxt224 touch Y max"
depends on ATMEL_MXT224
default 4095
help
RK29 atmel_mxt224 touch max Y size
config SINTEK_3FA16
tristate "Sintek 3FA16 touchscreen"
depends on I2C2_RK29
help
RK29 Sintek touch
config HANNSTAR_MAX_X
int "Sintek touch x max"
depends on SINTEK_3FA16
default 1024
help
RK29 hannstar touch max X size
config HANNSTAR_MAX_Y
int "Sintek touch Y max"
depends on SINTEK_3FA16
default 600
help
RK29 hannstar touch max Y size
config HANNSTAR_DEBUG
bool "Sintek debug"
depends on SINTEK_3FA16
default n
help
RK29 hannstar touch debug
config EETI_EGALAX
tristate "EETI_EGALAX touchscreen panel support"
depends on I2C
help
Say Y here to enable support for I2C connected EETI touch panels.
To compile this driver as a module, choose M here: the
module will be called eeti_egalax_ts.
config EETI_EGALAX_MAX_X
int "EETI_EGALAX_MAX_X"
depends on EETI_EGALAX
default 2047
help
RK29 EETI_EGALAX touch max X size
config EETI_EGALAX_MAX_Y
int "EETI_EGALAX_MAX_Y"
depends on EETI_EGALAX
default 2047
help
RK29 EETI_EGALAX touch max Y size
config EETI_EGALAX_DEBUG
bool "EETI_EGALAX debug"
depends on EETI_EGALAX
default n
help
RK29 EETI_EGALAX touch debug
config TOUCHSCREEN_IT7260
tristate "IT7260 based touchscreens: IT7260 Interface"
depends on I2C2_RK29
help
Say Y here if you have a touchscreen interface using the
it7260 controller, and your board-specific initialization
code includes that in its table of I2C devices.
If unsure, say N (but it's safe to say "Y").
config TOUCHSCREEN_IT7260_I2C
tristate "IT7260 based touchscreens: IT7260 I2C Interface"
depends on I2C_RK29
help
Say Y here if you have a touchscreen interface using the
IT7260 controller, and your board-specific initialization
code includes that in its table of I2C devices.
If unsure, say N (but it's safe to say "Y").
config TOUCHSCREEN_NAS
tristate "NAS based touchscreens: NAS Interface"
depends on I2C2_RK29
help
Say Y here if you have a touchscreen interface using the
nas controller, and your board-specific initialization
code includes that in its table of I2C devices.
If unsure, say N (but it's safe to say "Y").
config LAIBAO_TS
tristate "LAIBAO touchscreen"
depends on I2C2_RK29
help
RK29 LAIBAO touchscreen
config TOUCHSCREEN_GT801_IIC
tristate "GT801_IIC based touchscreens"
depends on I2C2_RK29
config TOUCHSCREEN_GT818_IIC
tristate "GT818_IIC based touchscreens"
depends on I2C2_RK29
config TOUCHSCREEN_PIXCIR
tristate "PIXCIR_IIC based touchscreens"
depends on I2C2_RK29
config D70_L3188A
tristate "D70-L3188A based touchscreens"
depends on I2C2_RK29
config TOUCHSCREEN_GT819
tristate "GT819 based touchscreens"
depends on I2C2_RK29
config TOUCHSCREEN_FT5306
tristate "FT5306 based touchscreens: FT5306 Interface"
depends on I2C2_RK29
config TOUCHSCREEN_FT5406
tristate "FT5406 based touchscreens: FT5406 Interface"
depends on I2C2_RK29
help
say Y here if you have a touchscreen interface using the FT5406
controller,and your board-specific initialization code includes that
in its table of I2C devices.
If unsure, say N(but it's safe to say "Y").
config ATMEL_MXT1386
tristate "ATMEL_MXT1386 touchscreen panel support"
depends on I2C
help
Say Y here to enable support for I2C connected ATMEL_MXT1386 touch panels.
To compile this driver as a module, choose M here: the
module will be called atmel_mxt1386_ts.
config ATMEL_MXT1386_MAX_X
int "ATMEL_MXT1386_MAX_X"
depends on ATMEL_MXT1386
default 4095
help
RK29 ATMEL_MXT1386 touch max X size
config ATMEL_MXT1386_MAX_Y
int "ATMEL_MXT1386_MAX_Y"
depends on ATMEL_MXT1386
default 4095
help
RK29 ATMEL_MXT1386 touch max Y size
config ATMEL_MXT1386_DEBUG
bool "ATMEL_MXT1386 debug"
depends on ATMEL_MXT1386
default n
help
RK29 ATMEL_MXT1386 touch debug
endif
Reference in New Issue View Git Blame Copy Permalink