Files
linux/Documentation
James Hogan b58f0273f0 pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver
Add a pin control driver for the TZ1090's low power pins via the
powerdown controller SOC_GPIO_CONTROL registers.

These pins have individually controlled pull-up, and group controlled
schmitt, slew-rate, drive-strength, and power-on-start (pos).

The pdc_gpio0 and pdc_gpio1 pins can also be muxed onto the
ir_mod_stable_out and ir_mod_power_out functions respectively. If no
function is set they remain in GPIO mode. These muxes can be overridden
by requesting them as GPIOs.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-doc@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24 17:21:38 +02:00
..
2012-04-03 13:09:18 +02:00
2012-10-08 13:50:12 +10:30
2012-12-14 08:48:59 +01:00
2013-04-02 09:39:55 -07:00
2013-03-02 20:09:50 +00:00
2013-01-10 01:27:46 +01:00
2013-04-27 16:41:43 -07:00
2013-04-08 13:33:48 -07:00
2012-07-29 21:11:05 -03:00
2013-04-16 18:47:19 +09:00
2012-12-10 15:54:27 +01:00
2012-12-05 23:52:10 +00:00
2013-02-19 08:42:37 +01:00
2013-04-24 11:42:42 +10:00
2012-02-28 16:05:06 +01:00
2013-06-17 18:18:29 +02:00
2012-01-02 13:04:55 +01:00