mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-09 12:17:12 +09:00
aa856bd83c
Changes in 4.4.115 loop: fix concurrent lo_open/lo_release bpf: fix branch pruning logic x86: bpf_jit: small optimization in emit_bpf_tail_call() bpf: fix bpf_tail_call() x64 JIT bpf: introduce BPF_JIT_ALWAYS_ON config bpf: arsh is not supported in 32 bit alu thus reject it bpf: avoid false sharing of map refcount with max_entries bpf: fix divides by zero bpf: fix 32-bit divide by zero bpf: reject stores into ctx via st and xadd x86/pti: Make unpoison of pgd for trusted boot work for real kaiser: fix intel_bts perf crashes ALSA: seq: Make ioctls race-free crypto: aesni - handle zero length dst buffer crypto: af_alg - whitelist mask and type power: reset: zx-reboot: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE gpio: ath79: add missing MODULE_DESCRIPTION/LICENSE mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE igb: Free IRQs when device is hotplugged KVM: x86: emulator: Return to user-mode on L1 CPL=0 emulation failure KVM: x86: Don't re-execute instruction when not passing CR2 value KVM: X86: Fix operand/address-size during instruction decoding KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered KVM: x86: ioapic: Preserve read-only values in the redirection table ACPI / bus: Leave modalias empty for devices which are not present cpufreq: Add Loongson machine dependencies bcache: check return value of register_shrinker drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled mode drm/amdkfd: Fix SDMA ring buffer size calculation drm/amdkfd: Fix SDMA oversubsription handling openvswitch: fix the incorrect flow action alloc size mac80211: fix the update of path metric for RANN frame btrfs: fix deadlock when writing out space cache KVM: VMX: Fix rflags cache during vCPU reset xen-netfront: remove warning when unloading module nfsd: CLOSE SHOULD return the invalid special stateid for NFSv4.x (x>0) nfsd: Ensure we check stateid validity in the seqid operation checks grace: replace BUG_ON by WARN_ONCE in exit_net hook nfsd: check for use of the closed special stateid lockd: fix "list_add double add" caused by legacy signal interface hwmon: (pmbus) Use 64bit math for DIRECT format values net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit quota: Check for register_shrinker() failure. SUNRPC: Allow connect to return EHOSTUNREACH kmemleak: add scheduling point to kmemleak_scan() drm/omap: Fix error handling path in 'omap_dmm_probe()' xfs: ubsan fixes scsi: aacraid: Prevent crash in case of free interrupt during scsi EH path scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vreg media: usbtv: add a new usbid usb: gadget: don't dereference g until after it has been null checked staging: rtl8188eu: Fix incorrect response to SIOCGIWESSID usb: option: Add support for FS040U modem USB: serial: pl2303: new device id for Chilitag USB: cdc-acm: Do not log urb submission errors on disconnect CDC-ACM: apply quirk for card reader USB: serial: io_edgeport: fix possible sleep-in-atomic usbip: prevent bind loops on devices attached to vhci_hcd usbip: list: don't list devices attached to vhci_hcd USB: serial: simple: add Motorola Tetra driver usb: f_fs: Prevent gadget unbind if it is already unbound usb: uas: unconditionally bring back host after reset selinux: general protection fault in sock_has_perm serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS spi: imx: do not access registers while clocks disabled Linux 4.4.115 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
To understand all the Linux-USB framework, you'll use these resources:
* This source code. This is necessarily an evolving work, and
includes kerneldoc that should help you get a current overview.
("make pdfdocs", and then look at "usb.pdf" for host side and
"gadget.pdf" for peripheral side.) Also, Documentation/usb has
more information.
* The USB 2.0 specification (from www.usb.org), with supplements
such as those for USB OTG and the various device classes.
The USB specification has a good overview chapter, and USB
peripherals conform to the widely known "Chapter 9".
* Chip specifications for USB controllers. Examples include
host controllers (on PCs, servers, and more); peripheral
controllers (in devices with Linux firmware, like printers or
cell phones); and hard-wired peripherals like Ethernet adapters.
* Specifications for other protocols implemented by USB peripheral
functions. Some are vendor-specific; others are vendor-neutral
but just standardized outside of the www.usb.org team.
Here is a list of what each subdirectory here is, and what is contained in
them.
core/ - This is for the core USB host code, including the
usbfs files and the hub class driver ("hub_wq").
host/ - This is for USB host controller drivers. This
includes UHCI, OHCI, EHCI, and others that might
be used with more specialized "embedded" systems.
gadget/ - This is for USB peripheral controller drivers and
the various gadget drivers which talk to them.
Individual USB driver directories. A new driver should be added to the
first subdirectory in the list below that it fits into.
image/ - This is for still image drivers, like scanners or
digital cameras.
../input/ - This is for any driver that uses the input subsystem,
like keyboard, mice, touchscreens, tablets, etc.
../media/ - This is for multimedia drivers, like video cameras,
radios, and any other drivers that talk to the v4l
subsystem.
../net/ - This is for network drivers.
serial/ - This is for USB to serial drivers.
storage/ - This is for USB mass-storage drivers.
class/ - This is for all USB device drivers that do not fit
into any of the above categories, and work for a range
of USB Class specified devices.
misc/ - This is for all USB device drivers that do not fit
into any of the above categories.