Files
linux/include/linux
Linus Torvalds f4e70c2e5f Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon:
 "Core changes:
   - Add a sysfs attribute to expose available OOB size

  Driver changes:
   - Remove HAS_DMA dependency on various drivers
   - Use dev_get_drvdata() instead of platform_get_drvdata() in docg3
   - Replace msleep by usleep_range() in the dataflash driver
   - Avoid VLA usage in nftl layers
   - Remove useless .owner assignment in pismo
   - Fix various issues in the CFI driver
   - Improve TRX partition handling expose a DT compat for this part
     parser
   - Clarify OFFSET_CONTINUOUS meaning

  NAND core changes:
   - Add Miquel as a NAND maintainer
   - Add access mode to the nand_page_io_req struct
   - Fix kernel-doc in rawnand.h
   - Support bit-wise majority to recover from corrupted ONFI parameter
     pages
   - Stop checking FAIL bit after a SET_FEATURES, as documented in the
     ONFI spec

  Raw NAND Driver changes:
   - Fix and cleanup the error path of many NAND controller drivers
   - GPMI:
      + Cleanup/simplification of a few aspects in the driver
      + Take ECC setup specified in the DT into account
   - sunxi: remove support for GPIO-based R/B polling
   - MTK:
      + Use of_device_get_match_data() instead of of_match_device()
      + Add an entry in MAINTAINERS for this driver
      + Fix nand-ecc-step-size and nand-ecc-strength description in the
        DT bindings doc
   - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page

  OneNAND driver changes:
   - samsung: use dev_get_drvdata() instead of platform_get_drvdata()

  SPI NOR core changes:
   - Add support for a bunch of SPI NOR chips
   - Clear EAR reg when switching to 3-byte addressing mode on Winbond
     chips

  SPI NOR controller driver changes:
   - cadence: Add DMA support for direct mode reads
   - hisi: Prefix a few functions with hisi_
   - intel:
      + Mark the driver as "dangerous" in Kconfig
      + Fix atomic sequence handling
      + Pass a 40us delay (instead of 0us) to readl_poll_timeout()
   - fsl:
      + fix a typo in a function name
      + add support for IP variants embedded in the ls2080a and ls1080a
        SoCs
   - stm32: request exclusive control of the reset line"

* tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits)
  mtd: nand: Pass mode information to nand_page_io_req
  mtd: cfi_cmdset_0002: Change erase one block to enable XIP once
  mtd: cfi_cmdset_0002: Change erase functions to check chip good only
  mtd: cfi_cmdset_0002: Change erase functions to retry for error
  mtd: cfi_cmdset_0002: Change definition naming to retry write operation
  mtd: cfi_cmdset_0002: Change write buffer to check correct value
  mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS
  mtd: bcm47xxpart: add of_match_table with a new DT binding
  dt-bindings: mtd: document Broadcom's BCM47xx partitions
  mtd: spi-nor: Add support for EN25QH32
  mtd: spi-nor: Add support for is25wp series chips
  mtd: spi-nor: Add Winbond w25q32jv support
  mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a
  mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control
  mtd: spi-nor: intel: provide a range for poll_timout
  mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read
  mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig
  mtd: spi-nor: intel-spi: Fix atomic sequence handling
  mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op
  mtd: rawnand: use bit-wise majority to recover the ONFI param page
  ...
2018-06-08 10:39:20 -07:00
..
2018-05-25 18:23:56 +02:00
2018-05-23 14:01:03 +02:00
2018-01-01 22:54:42 -08:00
2018-02-20 11:34:54 +00:00
2018-06-05 10:48:09 -04:00
2018-06-07 17:34:35 -07:00
2018-04-16 14:20:26 -04:00
2018-05-26 09:16:44 +02:00
2018-04-20 17:18:35 -07:00
2017-06-08 18:52:36 -07:00
2018-03-16 10:56:13 +01:00
2018-05-28 17:41:02 +02:00
2018-05-09 17:25:13 +02:00
2017-11-15 18:21:04 -08:00
2018-03-16 15:45:51 -07:00
2018-03-16 10:55:47 +01:00
2018-03-26 15:09:38 +02:00
2018-06-07 17:34:33 -07:00
2018-04-27 14:34:51 +02:00
2017-08-24 13:23:03 -07:00
2017-11-27 16:19:56 -05:00
2018-06-01 07:38:16 -06:00
2018-01-01 12:40:27 -07:00
2018-03-26 15:56:44 +02:00
2017-08-07 17:22:14 +02:00
2017-11-13 01:41:20 +01:00
2018-04-26 09:02:01 -06:00
2017-03-21 10:15:47 +02:00
2018-06-07 17:34:37 -07:00
2018-02-22 21:13:03 +01:00
2017-06-21 14:37:12 -04:00
2018-03-26 08:53:43 -06:00
2018-01-17 11:30:16 +00:00
2018-05-09 12:21:46 -05:00
2018-06-07 17:34:35 -07:00
2018-04-11 10:28:38 -07:00
2017-11-15 18:21:01 -08:00
2017-12-01 13:09:40 -08:00
2018-04-12 09:41:19 -07:00
2017-10-07 10:45:02 -06:00
2017-02-24 17:46:57 -08:00
2017-08-28 20:51:22 +02:00
2018-06-05 08:50:16 -04:00
2018-06-07 17:34:35 -07:00
2018-04-11 10:28:32 -07:00
2018-06-07 17:34:37 -07:00
2018-06-07 18:39:37 -07:00
2018-06-07 17:34:39 -07:00
2018-03-26 13:14:43 -04:00
2018-03-26 13:14:43 -04:00
2017-11-17 16:10:00 -08:00
2018-01-28 22:17:24 -05:00
2017-07-25 18:05:25 +02:00
2018-06-01 14:37:35 +02:00
2018-01-08 08:22:45 -06:00
2018-01-17 15:25:50 +01:00
2018-01-08 08:22:45 -06:00
2018-06-07 17:34:36 -07:00
2018-04-11 10:28:39 -07:00
2018-01-31 17:18:37 -08:00
2017-11-09 10:23:28 +01:00
2018-06-06 16:10:45 -05:00
2018-05-15 15:51:38 +01:00
2018-06-07 17:34:35 -07:00
2017-11-17 16:10:04 -08:00
2017-11-17 16:10:04 -08:00
2017-11-13 01:33:48 +01:00
2017-12-16 02:05:48 +01:00
2018-05-31 00:13:56 +08:00
2018-05-11 17:28:45 -07:00
2018-05-11 17:28:45 -07:00
2017-12-11 14:37:11 -07:00
2018-06-04 17:28:20 -04:00
2018-03-17 14:20:55 +01:00
2018-03-01 08:33:05 -07:00
2017-11-07 12:22:21 +01:00
2018-05-04 12:48:54 -07:00
2018-04-30 05:14:55 -07:00
2018-06-07 17:34:35 -07:00
2018-06-07 17:34:37 -07:00
2018-05-03 15:55:23 -07:00
2018-01-15 12:07:46 -08:00
2018-04-16 14:25:08 -06:00
2018-02-06 18:32:47 -08:00
2018-01-09 16:27:43 +01:00
2018-05-18 11:40:27 -04:00
2018-05-19 13:57:31 +02:00
2018-05-19 13:57:31 +02:00
2018-04-26 15:08:04 -04:00
2018-02-06 18:32:44 -08:00
2017-12-20 09:53:54 -07:00
2017-10-04 10:29:22 +02:00
2018-05-14 09:51:34 -04:00
2017-08-15 09:02:07 -07:00
2017-08-15 09:02:08 -07:00