Tushar Dave 5a4cebe94b e1000e: NIC goes up and immediately goes down ...

commit b7ec70be01 upstream.

Found that commit d478eb44 was a bad commit.
If the link partner is transmitting codeword (even if NULL codeword),
then the RXCW.C bit will be set so check for RXCW.CW is unnecessary.
Ref: RH BZ 840642

Reported-by: Fabio Futigami <ffutigam@redhat.com>
Signed-off-by: Tushar Dave <tushar.n.dave@intel.com>
CC: Marcelo Ricardo Leitner <mleitner@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2012-08-15 12:04:30 -07:00

..

82571.c

e1000e: NIC goes up and immediately goes down

2012-08-15 12:04:30 -07:00

defines.h

e1000e: disable jumbo frames on 82579 when MACsec enabled in EEPROM

2011-03-11 02:23:21 -08:00

e1000.h

e1000e: Avoid wrong check on TX hang

2012-04-02 09:27:18 -07:00

es2lan.c

e1000e: implement ethtool set_phys_id

2011-04-27 02:05:53 -07:00

ethtool.c

net/igb/e1000/e1000e: more robust ethtool duplex/speed configuration

2011-04-29 14:03:03 -07:00

hw.h

e1000e: implement ethtool set_phys_id

2011-04-27 02:05:53 -07:00

ich8lan.c

e1000e: workaround for packet drop on 82579 at 100Mbps

2011-10-16 14:14:55 -07:00

lib.c

e1000e: alternate MAC address does not work on device id 0x1060

2011-08-15 18:31:42 -07:00

Makefile

e1000e: update Copyright for 2011

2011-01-14 02:04:01 -08:00

netdev.c

e1000e: Avoid wrong check on TX hang

2012-04-02 09:27:18 -07:00

param.c

e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs

2011-01-14 02:06:23 -08:00

phy.c

e1000e: convert short duration msleep() to usleep_range()

2011-04-13 19:17:06 -07:00