Compare commits
6 Commits
| Author | SHA1 | Date | |
|---|---|---|---|
|
934f88523a | ||
|
|
98b8baa08d | ||
|
|
1d2826d015 | ||
|
|
2ccca31882 | ||
|
|
3a757b95a4 | ||
|
|
d59191109e |
2
.gitmodules
vendored
2
.gitmodules
vendored
@@ -1,3 +1,3 @@
|
||||
[submodule "SBC_Model_Framework"]
|
||||
path = SBC_Model_Framework
|
||||
url = git@github.com:hominoids/SBC_Model_Framework.git
|
||||
url = https://github.com/hominoids/SBC_Model_Framework.git
|
||||
|
||||
29
README.md
29
README.md
@@ -3,9 +3,9 @@
|
||||
|
||||
## Introduction
|
||||
|
||||
This project is about autonomous SBC case creation. It utilizes the SBC Model Framework project to automatically generate cases based on the data for any given SBC contained within the framework. This allows legacy, current and future SBC to have multiple cases available on day one of their inclusion in the framework. There are multiple base case designs(shell, panel, stacked, tray, round, hex, snap, fitted) available and each allows for different styles within the design.
|
||||
This project is about autonomous SBC case creation. It utilizes the SBC Model Framework project to automatically generate cases based on the data for any of the 51 current SBC contained within the framework. This allows legacy, current and future SBC to have multiple cases available on day one of their inclusion in the framework. There are multiple base case designs(shell, panel, stacked, tray, tray-sides, round, hex, snap, fitted) available and each allows for different styles within the design.
|
||||
|
||||
All case openings are created automatically based on SBC data and, the dimensions of any case design can be expanded in any axis allowing for the creation of larger cases. If you reposition the SBC in a case, you will see i/o openings created or removed appropriately based on it’s proximity to the case geometry. These cases might be useful for prototypes or other in house uses to quickly and easily create standard, specialized and custom SBC cases thru different case designs, styles and accessories.
|
||||
All case openings are created automatically based on SBC data and the dimensions of any case design can be expanded in any axis allowing for the creation of larger cases. If you reposition the SBC in a case, you will see i/o openings created or removed appropriately based on it’s proximity to the case geometry. These cases might be useful for prototypes or other in house uses to quickly and easily create standard, specialized and custom SBC cases thru different case designs, styles and accessories.
|
||||
|
||||
License: GPLv3.
|
||||
|
||||
@@ -21,9 +21,9 @@ License: GPLv3.
|
||||
```
|
||||
|
||||
### SBC Case Builder Features:
|
||||
- Autonomous Multi-SBC, Parametric Multi-Case Generation
|
||||
- Autonomous Multi-SBC, Multi-Case Parametric Generation
|
||||
- Autonomous Case Standoffs with Variable Height
|
||||
- Extended Standoff sbc collision detection
|
||||
- Extended Standoff SBC collision detection
|
||||
- Accessory Customization Framework
|
||||
- Accessory Multi-Associative Parametric Positioning
|
||||
- Absolute Location
|
||||
@@ -47,6 +47,7 @@ License: GPLv3.
|
||||
- Sliding
|
||||
- Cylinder
|
||||
- Rack
|
||||
- Folded
|
||||
- CNC Cases
|
||||
|
||||
All case data is stored in the json file sbc_case_builder.json with the accessory data stored in a separate file structure in sbc_case_builder_accessories.cfg. An accessory group name for a given case is stored as part of the case data in the json file. This allows for the reuse or sharing of an accessory set by different cases and can be used to manage groups of accessories.
|
||||
@@ -82,19 +83,27 @@ There are currently 47 SBC represented by 43 models, from 8 manufactures in SBC
|
||||
- ORANGE = unverified, may be usable but missing component data
|
||||
- RED = unverified, not usable due to incomplete component data
|
||||
|
||||
### Utility
|
||||
Additionally, template creation and i/o panel layouts in a dxf format can be easily created and integrated into other designs or for hand fabrication by sectioning a case panel for the desired SBC. The case design “panel” will most likely work best.
|
||||
The SBC that I do not own have been created using manufacturer supplied mechanical drawings. Some of the drawings are missing information or have errors that effect all or part of the drawings and subsequent SBC models. If you own an SBC that is not represented or verified in SBC Model Framework, please consider adding it or helping to correct errors in existing SBC data. An SBC can be verified to be accurate if a printed shell case from SBC Case Builder fits. Any misalignment is corrected in the SBC Model Framework model data(sbc_models.cfg).
|
||||
|
||||
### Future Development
|
||||
|
||||
There are a few more ideas for base cases to be worked on as well as a host of supporting accessory models that need to be created. It would also be nice to have all of the OEM accessories for each SBC in the library as well. I’m still looking for a better way to create accessory entries and groups, and continue to expand and verify as many SBC as possible. With that and the obvious benefit of autonomously making SBC cases, this project has also been helping fulfill another personal goal.
|
||||
|
||||
Computer aided design(CAD) has been around along time but I have been interested in exploring approaches to the next step, computer autonomous design. Regardless of the current or future object creation method, whether it be manufactured or materialized, I believe a universal approach to autonomous design will be needed to advance the human condition. This application has helped me explore and think about practical approaches that might be possible right now in autonomous design and I hope to continue this work by developing new tools and techniques for the new CAD, Computer Autonomous Design.
|
||||
|
||||
### Notes
|
||||
|
||||
Notes:
|
||||
Due to the number of possibilities, no pre-compiled case stl’s are included.
|
||||
|
||||
“tol”, located at the bottom of the Adjustments Tab, is a tolerance fitment adjustment for the snap, fitted, round and hex tops. Adjust accordingly if the tops are too tight or loose.
|
||||
|
||||
Template creation and i/o panel layouts in a dxf format can be easily created and integrated into other designs or for hand fabrication by sectioning a case panel for the desired SBC. The case design “panel” will most likely work best.
|
||||
|
||||
|
||||
### Case Designs and Styles
|
||||
The case naming convention for standard cases in the configuration file follow the basic form of “sbc”_”design”_”style” e.g. c4_shell or c4_tray_vu5.
|
||||
|
||||
#### Current Case Count 368
|
||||
#### Current Case Count 395
|
||||
|
||||
##### Hardkernel
|
||||
|
||||
@@ -122,6 +131,8 @@ c4_tray_vu7, c4_shell_boombox, c4_panel_boombox, c4_deskboom_lcd3.5, c4_tray_boo
|
||||
|
||||
**Odroid-H2 cases** - 17 : h2_shell, h2_lowboy, h2_lowboy_router, h2_shell_router, h2_shell_routerssd, h2_panel, h2_stacked, h2_tray, h2_tray_sides, h2_tray_vu5, h2_tray_vu7, h2_tray_router, h2_router_station, h2_round, h2_hex, h2_snap, h2_fitted
|
||||
|
||||
**Odroid-H3 cases** - 18 : h3_shell, h3_shell-internalfan, h3_lowboy, h3_lowboy_router, h3_shell_router, h3_shell_routerssd, h3_panel, h3_stacked, h3_tray, h3_tray_sides, h3_tray_vu5, h3_tray_vu7, h3_tray_router, h3_router_station, h3_round, h3_hex, h3_snap, h3_fitted
|
||||
|
||||
**Odroid-Show2** cases - 1 : show2_shell
|
||||
|
||||
|
||||
@@ -164,6 +175,8 @@ c4_tray_vu7, c4_shell_boombox, c4_panel_boombox, c4_deskboom_lcd3.5, c4_tray_boo
|
||||
|
||||
**ROCKPi 4c+** - 9 : rockpi4c+_shell, rockpi4c+_panel, rockpi4c+_stacked, rockpi4c+_tray, rockpi4c+_tray_sides, rockpi4c+_round, rockpi4c+_hex, rockpi4c+_snap, rockpi4c+_fitted
|
||||
|
||||
**ROCKPi5b** - 9 : rockpi5b_shell, rockpi5b_panel, rockpi5b_stacked, rockpi5b_tray, rockpi5b_tray_sides, rockpi5b_round, rockpi5b_hex, rockpi5b_snap, rockpi5b_fitted
|
||||
|
||||
|
||||
##### Khadas
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 1.3 MiB After Width: | Height: | Size: 3.2 MiB |
Submodule SBC_Model_Framework updated: f3759ccbc2...ccda0585c0
@@ -1,9 +1,9 @@
|
||||
// Gets a list of SBCs from the SBC Model Framework and Accessory sets
|
||||
// for use with SBC Case Builder.
|
||||
// After running this script, copy the output from the first Echo command into the
|
||||
// list of SBC boards in `sbc_case_builder.scad:80`
|
||||
// list of SBC boards in `sbc_case_builder.scad:83`
|
||||
// Also copy the output from the second Echo command into the list of case acceessory
|
||||
// sets in `sbc_case_builder.scad:160`
|
||||
// sets in `sbc_case_builder.scad:164`
|
||||
|
||||
include <./SBC_Model_Framework/sbc_models.cfg>;
|
||||
include <./sbc_case_builder_accessories.cfg>;
|
||||
@@ -14,4 +14,4 @@ echo(boards);
|
||||
|
||||
accessory_sets = [for(i=[0:1:len(accessory_data)-1]) accessory_data[i][0]];
|
||||
echo("Copy the following to `sbc_case_builder.scad` for the `accessory_name` variable");
|
||||
echo(accessory_sets);
|
||||
echo(accessory_sets);
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -40,6 +40,8 @@
|
||||
added components and masks, added multi-associative parametric positioning for accessories,
|
||||
added individual variable height sbc standoffs, added cutaway view when case face
|
||||
is not movable, finished indents for select components and orientations.
|
||||
20221011 Version 2.0.1 adjusted cases and accessories, updated README.md and SBC_Case_Builder_Cases.gif
|
||||
20221101 Version 2.0.2 updated sbc model framework, h3/h3+ model and rockpi5b adjustments
|
||||
|
||||
see https://github.com/hominoids/SBC_Case_Builder
|
||||
*/
|
||||
@@ -78,7 +80,7 @@ case_design = "shell"; // [shell,panel,stacked,tray,round,hex,snap,fitted]
|
||||
// base case style
|
||||
case_style = "none"; // ["none","vu5","vu7","sides"]
|
||||
// single board computer model
|
||||
sbc_model = "c1+"; // ["c1+", "c2", "c4", "xu4", "xu4q", "mc1", "hc1", "n1", "n2", "n2+", "n2+_noheatsink", "m1", "m1_noheatsink", "h2", "hc4", "show2", "rpizero", "rpizero2w", "rpi1a+", "rpi1b+", "rpi3a+", "rpi3b", "rpi3b+", "rpi4b", "a64", "rock64", "rockpro64", "quartz64a", "quartz64b", "h64b", "atomicpi", "jetsonnano", "rockpi4b+", "rockpi4c", "rockpi4c+", "vim1", "vim2", "vim3", "vim3l", "vim4", "tinkerboard", "tinkerboard-s", "tinkerboard-2", "tinkerboard-r2", "opizero", "opizero2", "opir1plus_lts", "test"]
|
||||
sbc_model = "c1+"; // ["c1+", "c2", "c4", "xu4", "xu4q", "mc1", "hc1", "n1", "n2", "n2+", "n2+_noheatsink", "m1", "m1_noheatsink", "h2", "h3", "hc4", "show2", "rpizero", "rpizero2w", "rpi1a+", "rpi1b+", "rpi3a+", "rpi3b", "rpi3b+", "rpi4b", "a64", "rock64", "rockpro64", "quartz64a", "quartz64b", "h64b", "atomicpi", "jetsonnano", "rockpi4b+", "rockpi4c", "rockpi4c+", "rockpi5b", "vim1", "vim2", "vim3", "vim3l", "vim4", "tinkerboard", "tinkerboard-s", "tinkerboard-2", "tinkerboard-r2", "opizero", "opizero2", "opir1plus_lts", "test"]
|
||||
// sbc location x axis
|
||||
pcb_loc_x = 0; //[0:.5:200]
|
||||
// sbc location y axis
|
||||
@@ -159,7 +161,7 @@ cooling = "fan"; // [none,vents,fan,custom]
|
||||
exhaust_vents = "vent"; // [none,vent]
|
||||
// case accessory group to load
|
||||
|
||||
accessory_name = "none"; // ["none", "c1+_shell_boombox", "c1+_panel_boombox", "c1+_panel_lcd3.5", "c1+_desktop_lcd3.5", "c1+_deskboom_lcd3.5", "c1+_tray_boombox", "c1+_round", "c1+_hex", "c2_shell_boombox", "c2_panel_boombox", "c2_panel_lcd3.5", "c2_desktop_lcd3.5", "c2_deskboom_lcd3.5", "c2_tray_boombox", "c2_round", "c2_hex", "c4_shell_boombox", "c4_panel_lcd3.5", "c4_desktop_lcd3.5", "c4_deskboom_lcd3.5", "c4_panel_boombox", "c4_tray_boombox", "c4_round", "c4_hex", "hc4_tray_drivebox2.5", "hc4_shell_drivebox2.5", "hc4_shell_drivebox2.5v", "hc4_shell_drivebox3.5", "n1_round", "n1_hex", "n2+_tray_vu7_fan", "m1_panel", "m1_tray", "m1_tray_drive", "m1_tray_sides", "m1_tray_vu5", "m1_tray_vu7", "h2_shell", "h2_shell_router", "h2_shell_router-ssd", "h2_lowboy", "h2_lowboy_router", "h2_tray", "h2_tray_sides", "h2_tray_router", "h2_router_station", "h2_round", "h2_hex", "jetsonnano_shell", "jetsonnano_panel", "jetsonnano_stacked", "jetsonnano_tray", "jetsonnano_tray_sides", "jetsonnano_round", "jetsonnano_hex", "jetsonnano_snap", "jetsonnano_fitted", "rock64_shell", "rock64_panel", "rock64_stacked", "rock64_tray", "rock64_tray_sides", "rock64_round", "rock64_hex", "rock64_snap", "rock64_fitted", "rockpro64_shell", "rockpro64_panel", "rockpro64_stacked", "rockpro64_tray", "rockpro64_tray_sides", "rockpro64_round", "rockpro64_hex", "rockpro64_snap", "rockpro64_fitted", "quartz64b_stacked_poe_hat", "show2_shell", "rpi1a+_shell", "rpi1a+_panel", "rpi1a+_stacked", "rpi1a+_tray", "rpi1a+_tray_sides", "rpi1a+_round", "rpi1a+_hex", "rpi1a+_snap", "rpi1a+_fitted", "rpi1b+_shell", "rpi1b+_panel", "rpi1b+_stacked", "rpi1b+_tray", "rpi1b+_tray_sides", "rpi1b+_round", "rpi1b+_hex", "rpi1b+_snap", "rpi1b+_fitted", "rpi3a+_shell", "rpi3a+_panel", "rpi3a+_stacked", "rpi3a+_tray", "rpi3a+_tray_sides", "rpi3a+_round", "rpi3a+_hex", "rpi3a+_snap", "rpi3a+_fitted", "rpi3b_shell", "rpi3b_panel", "rpi3b_stacked", "rpi3b_tray", "rpi3b_tray_sides", "rpi3b_round", "rpi3b_hex", "rpi3b_snap", "rpi3b_fitted", "rpi3b+_shell", "rpi3b+_panel", "rpi3b+_stacked", "rpi3b+_tray", "rpi3b+_tray_sides", "rpi3b+_round", "rpi3b+_hex", "rpi3b+_snap", "rpi3b+_fitted", "rpi4b_shell", "rpi4b_shell_geeekpi_poe_hat", "rpi4b_panel", "rpi4b_stacked", "rpi4b_stacked_geeekpi_poe_hat", "rpi4b_tray", "rpi4b_tray_sides", "rpi4b_round", "rpi4b_hex", "rpi4b_snap", "rpi4b_fitted", "rockpi4b+_shell", "rockpi4b+_panel", "rockpi4b+_stacked", "rockpi4b+_tray", "rockpi4b+_tray_sides", "rockpi4b+_round", "rockpi4b+_hex", "rockpi4b+_snap", "rockpi4b+_fitted", "rockpi4c_shell", "rockpi4c_panel", "rockpi4c_stacked", "rockpi4c_tray", "rockpi4c_tray_sides", "rockpi4c_round", "rockpi4c_hex", "rockpi4c_snap", "rockpi4c_fitted", "rockpi4c+_shell", "rockpi4c+_panel", "rockpi4c+_stacked", "rockpi4c+_tray", "rockpi4c+_tray_sides", "rockpi4c+_round", "rockpi4c+_hex", "rockpi4c+_snap", "rockpi4c+_fitted", "vim1_shell", "vim1_panel", "vim1_stacked", "vim1_tray", "vim1_tray_sides", "vim1_round", "vim1_hex", "vim1_snap", "vim1_fitted", "vim2_shell", "vim2_panel", "vim2_stacked", "vim2_tray", "vim2_tray_sides", "vim2_round", "vim2_hex", "vim2_snap", "vim2_fitted", "vim3l_shell", "vim3l_panel", "vim3l_stacked", "vim3l_tray", "vim3l_tray_sides", "vim3l_round", "vim3l_hex", "vim3l_snap", "vim3l_fitted", "vim3_shell", "vim3_panel", "vim3_stacked", "vim3_tray", "vim3_tray_sides", "vim3_round", "vim3_hex", "vim3_snap", "vim3_fitted", "vim4_shell", "vim4_panel", "vim4_stacked", "vim4_tray", "vim4_tray_sides", "vim4_round", "vim4_hex", "vim4_snap", "vim4_fitted", "tinkerboard_shell", "tinkerboard_panel", "tinkerboard_stacked", "tinkerboard_tray", "tinkerboard_tray_sides", "tinkerboard_round", "tinkerboard_hex", "tinkerboard_snap", "tinkerboard_fitted", "tinkerboard-s_shell", "tinkerboard-s_panel", "tinkerboard-s_stacked", "tinkerboard-s_tray", "tinkerboard-s_tray_sides", "tinkerboard-s_round", "tinkerboard-s_hex", "tinkerboard-s_snap", "tinkerboard-s_fitted", "tinkerboard-2_shell", "tinkerboard-2_panel", "tinkerboard-2_stacked", "tinkerboard-2_tray", "tinkerboard-2_tray_sides", "tinkerboard-2_round", "tinkerboard-2_hex", "tinkerboard-2_snap", "tinkerboard-2_fitted", "tinkerboard-r2_shell", "tinkerboard-r2_panel", "tinkerboard-r2_stacked", "tinkerboard-r2_tray", "tinkerboard-r2_tray_sides", "tinkerboard-r2_round", "tinkerboard-r2_hex", "tinkerboard-r2_snap", "tinkerboard-r2_fitted", "hk_uart"]
|
||||
accessory_name = "none"; // ["none", "c1+_shell_boombox", "c1+_panel_boombox", "c1+_panel_lcd3.5", "c1+_desktop_lcd3.5", "c1+_deskboom_lcd3.5", "c1+_tray_boombox", "c1+_round", "c1+_hex", "c2_shell_boombox", "c2_panel_boombox", "c2_panel_lcd3.5", "c2_desktop_lcd3.5", "c2_deskboom_lcd3.5", "c2_tray_boombox", "c2_round", "c2_hex", "c4_shell_boombox", "c4_panel_lcd3.5", "c4_desktop_lcd3.5", "c4_deskboom_lcd3.5", "c4_panel_boombox", "c4_tray_boombox", "c4_round", "c4_hex", "hc4_tray_drivebox2.5", "hc4_shell_drivebox2.5", "hc4_shell_drivebox2.5v", "hc4_shell_drivebox3.5", "n1_round", "n1_hex", "n2+_tray_vu7_fan", "m1_panel", "m1_tray", "m1_tray_drive", "m1_tray_sides", "m1_tray_vu5", "m1_tray_vu7", "h2_shell", "h2_shell_router", "h2_shell_router-ssd", "h2_lowboy", "h2_lowboy_router", "h2_tray", "h2_tray_sides", "h2_tray_router", "h2_router_station", "h2_round", "h2_hex", "h3_shell", "h3_shell-internalfan", "h3_lowboy", "h3_lowboy_router", "jetsonnano_shell", "jetsonnano_panel", "jetsonnano_stacked", "jetsonnano_tray", "jetsonnano_tray_sides", "jetsonnano_round", "jetsonnano_hex", "jetsonnano_snap", "jetsonnano_fitted", "rock64_shell", "rock64_panel", "rock64_stacked", "rock64_tray", "rock64_tray_sides", "rock64_round", "rock64_hex", "rock64_snap", "rock64_fitted", "rockpro64_shell", "rockpro64_panel", "rockpro64_stacked", "rockpro64_tray", "rockpro64_tray_sides", "rockpro64_round", "rockpro64_hex", "rockpro64_snap", "rockpro64_fitted", "quartz64b_stacked_poe_hat", "show2_shell", "rpi1a+_shell", "rpi1a+_panel", "rpi1a+_stacked", "rpi1a+_tray", "rpi1a+_tray_sides", "rpi1a+_round", "rpi1a+_hex", "rpi1a+_snap", "rpi1a+_fitted", "rpi1b+_shell", "rpi1b+_panel", "rpi1b+_stacked", "rpi1b+_tray", "rpi1b+_tray_sides", "rpi1b+_round", "rpi1b+_hex", "rpi1b+_snap", "rpi1b+_fitted", "rpi3a+_shell", "rpi3a+_panel", "rpi3a+_stacked", "rpi3a+_tray", "rpi3a+_tray_sides", "rpi3a+_round", "rpi3a+_hex", "rpi3a+_snap", "rpi3a+_fitted", "rpi3b_shell", "rpi3b_panel", "rpi3b_stacked", "rpi3b_tray", "rpi3b_tray_sides", "rpi3b_round", "rpi3b_hex", "rpi3b_snap", "rpi3b_fitted", "rpi3b+_shell", "rpi3b+_panel", "rpi3b+_stacked", "rpi3b+_tray", "rpi3b+_tray_sides", "rpi3b+_round", "rpi3b+_hex", "rpi3b+_snap", "rpi3b+_fitted", "rpi4b_shell", "rpi4b_shell_geeekpi_poe_hat", "rpi4b_panel", "rpi4b_stacked", "rpi4b_stacked_geeekpi_poe_hat", "rpi4b_tray", "rpi4b_tray_sides", "rpi4b_round", "rpi4b_hex", "rpi4b_snap", "rpi4b_fitted", "rockpi4b+_shell", "rockpi4b+_panel", "rockpi4b+_stacked", "rockpi4b+_tray", "rockpi4b+_tray_sides", "rockpi4b+_round", "rockpi4b+_hex", "rockpi4b+_snap", "rockpi4b+_fitted", "rockpi4c_shell", "rockpi4c_panel", "rockpi4c_stacked", "rockpi4c_tray", "rockpi4c_tray_sides", "rockpi4c_round", "rockpi4c_hex", "rockpi4c_snap", "rockpi4c_fitted", "rockpi4c+_shell", "rockpi4c+_panel", "rockpi4c+_stacked", "rockpi4c+_tray", "rockpi4c+_tray_sides", "rockpi4c+_round", "rockpi4c+_hex", "rockpi4c+_snap", "rockpi4c+_fitted", "rockpi5b_adjustments", "vim1_shell", "vim1_panel", "vim1_stacked", "vim1_tray", "vim1_tray_sides", "vim1_round", "vim1_hex", "vim1_snap", "vim1_fitted", "vim2_shell", "vim2_panel", "vim2_stacked", "vim2_tray", "vim2_tray_sides", "vim2_round", "vim2_hex", "vim2_snap", "vim2_fitted", "vim3l_shell", "vim3l_panel", "vim3l_stacked", "vim3l_tray", "vim3l_tray_sides", "vim3l_round", "vim3l_hex", "vim3l_snap", "vim3l_fitted", "vim3_shell", "vim3_panel", "vim3_stacked", "vim3_tray", "vim3_tray_sides", "vim3_round", "vim3_hex", "vim3_snap", "vim3_fitted", "vim4_shell", "vim4_panel", "vim4_stacked", "vim4_tray", "vim4_tray_sides", "vim4_round", "vim4_hex", "vim4_snap", "vim4_fitted", "tinkerboard_shell", "tinkerboard_panel", "tinkerboard_stacked", "tinkerboard_tray", "tinkerboard_tray_sides", "tinkerboard_round", "tinkerboard_hex", "tinkerboard_snap", "tinkerboard_fitted", "tinkerboard-s_shell", "tinkerboard-s_panel", "tinkerboard-s_stacked", "tinkerboard-s_tray", "tinkerboard-s_tray_sides", "tinkerboard-s_round", "tinkerboard-s_hex", "tinkerboard-s_snap", "tinkerboard-s_fitted", "tinkerboard-2_shell", "tinkerboard-2_panel", "tinkerboard-2_stacked", "tinkerboard-2_tray", "tinkerboard-2_tray_sides", "tinkerboard-2_round", "tinkerboard-2_hex", "tinkerboard-2_snap", "tinkerboard-2_fitted", "tinkerboard-r2_shell", "tinkerboard-r2_panel", "tinkerboard-r2_stacked", "tinkerboard-r2_tray", "tinkerboard-r2_tray_sides", "tinkerboard-r2_round", "tinkerboard-r2_hex", "tinkerboard-r2_snap", "tinkerboard-r2_fitted", "hk_uart"]
|
||||
|
||||
a = search([accessory_name],accessory_data);
|
||||
s = search([sbc_model],sbc_data);
|
||||
@@ -1751,6 +1753,7 @@ module case_side(case_design,case_style,side) {
|
||||
union() {
|
||||
translate([-gap,-wallthick-gap,-floorthick])
|
||||
cube([width-2*wallthick,wallthick,case_z+2*floorthick]);
|
||||
// right hook
|
||||
difference() {
|
||||
translate([width-(2*wallthick)-gap-adjust,-wallthick-gap,
|
||||
((case_z)/2)-4])
|
||||
@@ -1759,8 +1762,9 @@ module case_side(case_design,case_style,side) {
|
||||
((case_z)/2)-4-adjust])
|
||||
cube([wallthick+.25,wallthick+(2*adjust),4.25]);
|
||||
}
|
||||
// left hook
|
||||
difference() {
|
||||
translate([-(2*wallthick)-gap-adjust,-wallthick-gap,
|
||||
translate([-(2*wallthick)-gap-adjust-.25,-wallthick-gap,
|
||||
((case_z)/2)-4])
|
||||
cube([(2*wallthick)+.5,wallthick,8]);
|
||||
translate([-wallthick-gap-adjust-.25,-wallthick-gap-adjust,
|
||||
@@ -1787,6 +1791,7 @@ module case_side(case_design,case_style,side) {
|
||||
union() {
|
||||
translate([-gap,depth-2*(wallthick)-gap,-floorthick])
|
||||
cube([width-2*wallthick,wallthick,case_z+2*floorthick]);
|
||||
// right hook
|
||||
difference() {
|
||||
translate([width-(2*wallthick)-gap-adjust,depth-2*(wallthick)-gap-adjust,
|
||||
((case_z)/2)-4])
|
||||
@@ -1795,8 +1800,9 @@ module case_side(case_design,case_style,side) {
|
||||
depth-2*(wallthick)-adjust-gap-adjust,((case_z)/2)-4-adjust])
|
||||
cube([wallthick+.25,wallthick+(2*adjust),4.25]);
|
||||
}
|
||||
// left hook
|
||||
difference() {
|
||||
translate([-(2*wallthick)-gap-adjust,depth-2*(wallthick)-gap-adjust,(
|
||||
translate([-(2*wallthick)-gap-adjust-.25,depth-2*(wallthick)-gap-adjust,(
|
||||
(case_z)/2)-4])
|
||||
cube([(2*wallthick)+.5,wallthick,8]);
|
||||
translate([-wallthick-gap-adjust-.25,depth-2*(wallthick)-adjust-gap-adjust,
|
||||
@@ -2099,7 +2105,7 @@ module open_io() {
|
||||
}
|
||||
}
|
||||
// top cooling openings
|
||||
if(side == "top" && cooling == "fan" && class == "heatsink"
|
||||
if(side == "top" && cooling == "fan" && class == "heatsink" && type != "h3_oem"
|
||||
&& type != "h2_oem" && type != "n2_oem" && type != "n2+_oem") {
|
||||
translate([loc_x+6,loc_y-28,case_z-(floorthick+adjust)-5])
|
||||
fan_mask(40,floorthick+(2*adjust)+8,2);
|
||||
@@ -2118,6 +2124,10 @@ module open_io() {
|
||||
translate([loc_x-28,loc_y-28,case_z-(floorthick+adjust)])
|
||||
fan_mask(90,floorthick+6,2);
|
||||
}
|
||||
if(side == "top" && cooling == "fan" && class == "heatsink" && type == "h3_oem" ) {
|
||||
translate([loc_x-5,loc_y-16,case_z-(floorthick+adjust)])
|
||||
fan_mask(90,floorthick+6,2);
|
||||
}
|
||||
if(side == "top" && cooling == "vents" && class == "heatsink") {
|
||||
for(r=[loc_x+7:4:48+loc_x]) {
|
||||
translate([r,loc_y-20,case_z-(floorthick+adjust)-6])
|
||||
|
||||
@@ -32,6 +32,8 @@
|
||||
20221005 Version 2.0.0 added cusotmizer graphical ui, seperated case data from accessory data, moved case data to customizer json format,
|
||||
added multi-associative parametric positioning of accessories, added variable height sbc standoffs to accomidate
|
||||
add-on pcb, converted all existing accessories to use parametric positioning.
|
||||
20221011 Version 2.0.1 adjusted cases and accessories, updated README.md and SBC_Case_Builder_Cases.gif
|
||||
20221101 Version 2.0.2 updated sbc model framework, h3/h3+ model and rockpi5b adjustments
|
||||
|
||||
see https://github.com/hominoids/SBC_Case_Builder
|
||||
*/
|
||||
@@ -417,10 +419,10 @@ accessory_data = [
|
||||
"add2","hc4_oled_holder",20,82,1.99,"bottom",[0,0,0],["case",false,true,false],0,0,2,0,0,"",0, // model hc4 holder
|
||||
"add2","hd_holder",10,-21,1.99,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,0,"portrait",0, // add hd holder
|
||||
"sub","hd_holes",10,-21,-.01,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0, // sub hd bottom holes
|
||||
"sub","round",92,47,5,"bottom",[0,90,0],["case",true,false,false],3,0,3,0,0,"",0, // sub hd side screw hole
|
||||
"sub","round",92,123.6,5,"bottom",[0,90,0],["case",true,false,false],3,0,3,0,0,"",0, // sub hd side screw hole
|
||||
"sub","round",92,47,23,"bottom",[0,90,0],["case",true,false,false],3,0,3,0,0,"",0, // sub hd side screw hole
|
||||
"sub","round",92,123.6,23,"bottom",[0,90,0],["case",true,false,false],3,0,3,0,0,"",0, // sub hd side screws hole
|
||||
"sub","round",92,-5,5,"bottom",[0,90,0],["case",true,true,false],3,0,3,0,0,"",0, // sub hd side screw hole
|
||||
"sub","round",92,69.6,5,"bottom",[0,90,0],["case",true,true,false],3,0,3,0,0,"",0, // sub hd side screw hole
|
||||
"sub","round",92,-5,23,"bottom",[0,90,0],["case",true,true,false],3,0,3,0,0,"",0, // sub hd side screw hole
|
||||
"sub","round",92,69.6,23,"bottom",[0,90,0],["case",true,true,false],3,0,3,0,0,"",0, // sub hd side screws hole
|
||||
"sub","vent",71.85,88,30,"top",[0,0,0],["case",false,true,false],2,13,4,1,4,"vertical",1, // sub vent
|
||||
"suball","fan",39,-.1,7,"bottom",[90,0,0],["case",true,false,false],40,0,3,1,0,"",0, // sub fan
|
||||
"sub","vent",-3.5,35,34,"top",[0,0,90],["case",false,false,false],2,10,4,1,17,"vertical",1, // vent opening
|
||||
@@ -582,7 +584,7 @@ accessory_data = [
|
||||
"sub","vent",111.5,30,18,"top",[0,0,90],["case",true,false,false],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",-3.5,30,4,"bottom",[0,0,90],["case",false,false,false],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",111.5,30,4,"bottom",[0,0,90],["case",true,false,false],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"add2","batt_holder",98,40,44,"top",[180,0,-18],["case",false,false,false],10,10,0,0,0,"",0, // add uart
|
||||
"add2","batt_holder",98,40,53,"top",[180,0,-18],["case",false,false,true],10,10,0,0,0,"",0, // add uart
|
||||
"add1","access_port",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0, // access port
|
||||
"add2","button",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,11,0,0,"recess",0, // button
|
||||
"add2","button",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,11,0,0,"recess",0, // button
|
||||
@@ -701,7 +703,83 @@ accessory_data = [
|
||||
"platter","button_top",-30,0,0,"top",[0,0,0],["case",false,false,false],10,0,32,0,0,"recess",0, // button top
|
||||
"platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0], // access port cover
|
||||
|
||||
// Odroid-H3
|
||||
["h3_shell",
|
||||
"sub","vent",-3.5,30,18,"top",[0,0,90],["case",false,false,true],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",111.5,30,18,"top",[0,0,90],["case",true,false,true],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",-3.5,30,4,"bottom",[0,0,90],["case",false,false,true],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",111.5,30,4,"bottom",[0,0,90],["case",true,false,true],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"add1","access_port",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,79.5,2,0,0,"landscape",0, // access port
|
||||
"add2","batt_holder",98,40,53,"top",[180,0,-18],["sbc-case_z",true,true,true],10,10,0,0,0,"",0, // add battery holder
|
||||
"add2","button",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,32,0,0,"recess",0, // button
|
||||
"add2","button",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,32,0,0,"recess",0, // button
|
||||
"model","button_top",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,32,0,0,"recess",0, // button top
|
||||
"model","button_top",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,32,0,0,"recess",0, // button top
|
||||
"model","access_cover",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0, // access port cover
|
||||
"platter","button_top",-20,0,0,"top",[0,0,0],["case",false,false,false],10,0,32,0,0,"recess",0, // button top
|
||||
"platter","button_top",-30,0,0,"top",[0,0,0],["case",false,false,false],10,0,32,0,0,"recess",0, // button top
|
||||
"platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0], // access port cover
|
||||
|
||||
["h3_shell-internalfan",
|
||||
"sub","vent",-3.5,30,18,"top",[0,0,90],["case",false,false,true],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",111.5,30,18,"top",[0,0,90],["case",true,false,true],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",-3.5,30,4,"bottom",[0,0,90],["case",false,false,true],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",111.5,30,4,"bottom",[0,0,90],["case",true,false,true],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"add1","access_port",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,79.5,2,0,0,"landscape",0, // access port
|
||||
"add2","batt_holder",113.5,45,38,"top",[180,90,0],["sbc-case_z",true,true,true],10,10,0,0,0,"",0, // add battery holder
|
||||
"add2","button",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,32,0,0,"recess",0, // button
|
||||
"add2","button",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,32,0,0,"recess",0, // button
|
||||
"model","button_top",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,52,0,0,"recess",0, // button top
|
||||
"model","button_top",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,52,0,0,"recess",0, // button top
|
||||
"model","access_cover",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0, // access port cover
|
||||
"platter","button_top",-20,0,0,"top",[0,0,0],["case",false,false,false],10,0,32,0,0,"recess",0, // button top
|
||||
"platter","button_top",-30,0,0,"top",[0,0,0],["case",false,false,false],10,0,32,0,0,"recess",0, // button top
|
||||
"platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0], // access port cover
|
||||
|
||||
["h3_lowboy",
|
||||
"sub","rectangle",94.5,-4,32,"top",[0,0,0],["sbc-case_z",true,true,true],14,24.5,22,0,0,"vertical",[.25,.25,.25,.25], // sub rectangle
|
||||
"sub","rectangle",68,-4,32,"top",[0,0,0],["sbc-case_z",true,true,true],19.5,21.5,22,0,0,"vertical",[.25,.25,.25,.25], // sub rectangle
|
||||
"sub","rectangle",44.5,-4,32,"top",[0,0,0],["sbc-case_z",true,true,true],20.5,31,22,0,0,"vertical",[.25,.25,.25,.25], // sub rectangle
|
||||
"sub","rectangle",19.5,-4,32,"top",[0,0,0],["sbc-case_z",true,true,true],20.5,31,22,0,0,"vertical",[.25,.25,.25,.25], // sub rectangle
|
||||
"sub","rectangle",9.5,26.5,50,"top",[0,0,0],["sbc-case_z",true,true,true],79.5,74.5,5,0,0,"vertical",[.25,.25,.25,.25], // sub rectangle
|
||||
"sub","vent",-3.5,30,18,"top",[0,0,90],["case",false,false,false],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",111.5,30,18,"top",[0,0,90],["case",true,false,false],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",-3.5,30,4,"bottom",[0,0,90],["case",false,false,false],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",111.5,30,4,"bottom",[0,0,90],["case",true,false,false],2,6,4,1,17,"vertical",1, // vent opening
|
||||
"add2","-batt_holder",111.6,45,38,"top",[180,90,0],["sbc-case_z",true,true,true],10,10,0,0,0,"",0, // add battery holder
|
||||
"add1","access_port",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0, // access port
|
||||
"add2","button",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,11,0,0,"recess",0, // button
|
||||
"add2","button",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,11,0,0,"recess",0, // button
|
||||
"model","button_top",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,11,0,0,"recess",0, // button top
|
||||
"model","button_top",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,11,0,0,"recess",0, // button top
|
||||
"model","access_cover",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0, // access port cover
|
||||
"platter","button_top",-20,0,0,"top",[0,0,0],["case",false,false,false],10,0,11,0,0,"recess",0, // button top
|
||||
"platter","button_top",-30,0,0,"top",[0,0,0],["case",false,false,false],10,0,11,0,0,"recess",0, // button top
|
||||
"platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0], // access port cover
|
||||
|
||||
["h3_lowboy_router",
|
||||
"sub","rectangle",94.5,-4,32,"top",[0,0,0],["sbc-case_z",true,true,true],14,24.5,22,0,0,"vertical",[.25,.25,.25,.25], // sub rectangle
|
||||
"sub","rectangle",68,-4,32,"top",[0,0,0],["sbc-case_z",true,true,true],19.5,21.5,22,0,0,"vertical",[.25,.25,.25,.25], // sub rectangle
|
||||
"sub","rectangle",44.5,-4,32,"top",[0,0,0],["sbc-case_z",true,true,true],20.5,31,22,0,0,"vertical",[.25,.25,.25,.25], // sub rectangle
|
||||
"sub","rectangle",19.5,-4,32,"top",[0,0,0],["sbc-case_z",true,true,true],20.5,31,22,0,0,"vertical",[.25,.25,.25,.25], // sub rectangle
|
||||
"sub","rectangle",9.5,26.5,50,"top",[0,0,0],["sbc-case_z",true,true,true],79.5,74.5,5,0,0,"vertical",[.25,.25,.25,.25], // sub rectangle
|
||||
"sub","vent",-3.5,30,30,"top",[0,0,90],["case",false,false,false],2,10,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",111.5,30,30,"top",[0,0,90],["case",true,false,false],2,10,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",-3.5,30,4,"bottom",[0,0,90],["case",false,false,false],2,10,4,1,17,"vertical",1, // vent opening
|
||||
"sub","vent",111.5,30,4,"bottom",[0,0,90],["case",true,false,false],2,10,4,1,17,"vertical",1, // vent opening
|
||||
"add2","-batt_holder",98,40,44,"top",[180,0,-18],["case",false,false,false],10,10,0,0,0,"",0, // add uart
|
||||
"add1","access_port",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0, // access port
|
||||
"add2","button",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,11,0,0,"recess",0, // button
|
||||
"add2","button",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,11,0,0,"recess",0, // button
|
||||
"model","button_top",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,11,0,0,"recess",0, // button top
|
||||
"model","button_top",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,11,0,0,"recess",0, // button top
|
||||
"model","access_cover",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0, // access port cover
|
||||
"model","h2_netcard",0,0,19,"bottom",[0,0,0],["sbc",true,true,true],0,0,0,0,0,"portrait",0, // h2 network card
|
||||
"platter","button_top",-20,0,0,"top",[0,0,0],["case",false,false,false],10,0,11,0,0,"recess",0, // button top
|
||||
"platter","button_top",-30,0,0,"top",[0,0,0],["case",false,false,false],10,0,11,0,0,"recess",0, // button top
|
||||
"platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0], // access port cover
|
||||
|
||||
|
||||
// Nvidia
|
||||
["jetsonnano_shell",
|
||||
"sub","rectangle",17.5,36.375,31,"top",[0,0,0],["sbc-case_z",true,true,true],62,43,4,0,0,"",[1,1,1,1]], // sub heatsink opening
|
||||
@@ -1086,6 +1164,14 @@ accessory_data = [
|
||||
["rockpi4c+_fitted",
|
||||
"sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0], // sub fan opening
|
||||
|
||||
["rockpi5b",
|
||||
"sub","rectangle",-1,66.5,13,"top",[0,0,0],["sbc",true,true,false],10,2,8,0,0,"",[.25,.25,.25,.25], // UL standoff adjustment
|
||||
"sub","rectangle",92,17.5,13,"top",[0,0,0],["sbc",true,true,false],10,2,15,0,0,"",[.25,.25,.25,.25], // LR standoff adjustment
|
||||
"sub","rectangle",77,67,-1,"bottom",[0,0,0],["sbc",true,true,false],15,18,12.5,0,0,"",[.25,.25,.25,.25], // sdcard opening
|
||||
"add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0, // access port
|
||||
"model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0, // model access port cover
|
||||
"platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0], // platter access port cover
|
||||
|
||||
|
||||
// Khadas
|
||||
["vim1_shell",
|
||||
|
||||
@@ -44,7 +44,9 @@
|
||||
printer friendly punchout(),added remaining mask() entries, standardized mask()
|
||||
20221005 version 2.0.0 increased mask projection for ir_1, added mask for usb2 and usb3 single_horizontal_a, hdmi_micro,
|
||||
video-hdmi_mini,microsdcard,momentary_7x3x3_90,rj45_single_short, added subtraction microusb and sphere
|
||||
|
||||
20221011 Version 2.0.1 adjusted cases and accessories, updated README.md and SBC_Case_Builder_Cases.gif
|
||||
20221101 version 2.0.2 added hdmi_a_vertical mask, increased jack_3.5 mask dia.to 6mm, lowered hdmi_a_vertical mask by 2mm,
|
||||
added mask for microsdcard2
|
||||
|
||||
see https://github.com/hominoids/SBC_Case_Builder
|
||||
|
||||
@@ -2264,7 +2266,7 @@ module access_port(size,orientation) {
|
||||
translate([.5,6,-adjust]) cube([size[0]-1.15,size[1]-17,floorthick+(adjust*2)]);
|
||||
translate([(size[0]/2)-5,size[1]-12,-adjust]) slab([10.5,5.5,floorthick],5.5);
|
||||
translate([(size[0]/2)+.25,size[1]-6.5,floorthick+2])
|
||||
cylinder(r=3.3,h=floorthick+(adjust*2)+5,$fn=6);
|
||||
cylinder(r=3.2,h=floorthick+(adjust*2)+5,$fn=6);
|
||||
translate([(size[0]/2)+.25,size[1]-6.5,-adjust])
|
||||
cylinder(d=3.2,h=floorthick+(adjust*2)+5);
|
||||
translate([4,2+adjust,floorthick]) cube([7.75,3,2.75]);
|
||||
@@ -2279,15 +2281,15 @@ module access_port(size,orientation) {
|
||||
union() {
|
||||
translate([0,-1,0]) cube([size[0],size[1],size[2]]);
|
||||
// access panel support
|
||||
translate([size[0]-6.5,(size[1]/2)-.75,0]) cylinder(d=9,h=floorthick+(adjust*2)+5);
|
||||
translate([size[0]-11,(size[1]/2)-10,floorthick-adjust]) cube([9.5,20,floorthick]);
|
||||
translate([size[0]-6.5,(size[1]/2)-.5,0]) cylinder(d=9,h=floorthick+(adjust*2)+5);
|
||||
translate([size[0]-11,(size[1]/2)-10.5,floorthick-adjust]) cube([9.5,20,floorthick]);
|
||||
translate([0,0,floorthick-adjust]) cube([5,size[1]-2,4.5]);
|
||||
}
|
||||
// access opening
|
||||
translate([6,-.5,-adjust]) cube([size[0]-17,size[1]-1.15,floorthick+(adjust*3)]);
|
||||
translate([size[0]-12,(size[1]/2)-6,-adjust]) slab([5.5,10.5,floorthick],5.5);
|
||||
translate([size[0]-6.5,(size[1]/2)-.5,floorthick+2]) rotate([0,0,30])
|
||||
cylinder(r=3.3,h=floorthick+(adjust*2)+5,$fn=6);
|
||||
cylinder(r=3.2,h=floorthick+(adjust*2)+5,$fn=6);
|
||||
translate([size[0]-6.5,(size[1]/2)-.5,-adjust])
|
||||
cylinder(d=3.2,h=floorthick+(adjust*2)+5);
|
||||
translate([2+adjust,3,floorthick]) cube([3,8.25,2.75]);
|
||||
@@ -2327,8 +2329,8 @@ module access_cover(size,orientation) {
|
||||
if(orientation == "landscape") {
|
||||
difference() {
|
||||
union() {
|
||||
translate([6.25,-.25,0]) cube([size[0]-17.5,size[1]-2,floorthick]);
|
||||
translate([size[0]-12.25,(size[1]/2)-6,0]) slab([5,10,floorthick], 5);
|
||||
translate([6.25,0,0]) cube([size[0]-17.75,size[1]-2,floorthick]);
|
||||
translate([size[0]-12.25,(size[1]/2)-5.75,0]) slab([5,10,floorthick], 5);
|
||||
translate([6.25,0,floorthick-adjust]) cube([6,size[1]-2.15,floorthick]);
|
||||
translate([3.5+adjust,3.25,floorthick]) cube([4,7.25,2]);
|
||||
translate([3.5+adjust,size[1]-12.75,floorthick]) cube([4,7.25,2]);
|
||||
@@ -2562,6 +2564,19 @@ module mask(loc_x,loc_y,loc_z,rotation,side,class,type,wallthick,gap,floorthick,
|
||||
if(type == "hdmi_a" && side == "bottom" && rotation == 270) {
|
||||
place(loc_x-1,loc_y-1,loc_z-pcb_z,15,11.5,rotation,side) hdmi_open("hdmi_a");
|
||||
}
|
||||
// hdmi vertical opening
|
||||
if(type == "hdmi_a_vertical" && side == "top" && rotation == 0) {
|
||||
place(loc_x-.5,loc_y,loc_z,15,11.5,rotation,side) translate([-.25,0,15.4]) rotate([0,90,0]) hdmi_open("hdmi_a");
|
||||
}
|
||||
if(type == "hdmi_a_vertical" && side == "top" && rotation == 90) {
|
||||
place(loc_x-1,loc_y,loc_z,15,11.5,rotation,side) translate([-.25,0,15.4]) rotate([0,90,0]) hdmi_open("hdmi_a");
|
||||
}
|
||||
if(type == "hdmi_a_vertical" && side == "top" && rotation == 180) {
|
||||
place(loc_x,loc_y+1,loc_z,15,11.5,rotation,side) translate([-.25,0,15.4]) rotate([0,90,0]) hdmi_open("hdmi_a");
|
||||
}
|
||||
if(type == "hdmi_a_vertical" && side == "top" && rotation == 270) {
|
||||
place(loc_x+1,loc_y-.5,loc_z,15,11.5,rotation,side) translate([-.25,0,15.4]) rotate([0,90,0]) hdmi_open("hdmi_a");
|
||||
}
|
||||
// hdmi micro opening
|
||||
if(class == "video" && type == "hdmi_micro" && rotation == 0 && side == "top") {
|
||||
place(loc_x,loc_y,loc_z,7.25,6.5,rotation,side) hdmi_open("hdmi_micro");
|
||||
@@ -2809,6 +2824,38 @@ module mask(loc_x,loc_y,loc_z,rotation,side,class,type,wallthick,gap,floorthick,
|
||||
place(loc_x-12.1,loc_y+.125,loc_z-pcb_z,13.2,14.1,rotation,side)
|
||||
cube([13.5,14.1,2]);
|
||||
}
|
||||
if(type == "microsdcard2" && side == "bottom" && rotation == 0) {
|
||||
place(loc_x-1,loc_y-15,loc_z-pcb_z,12,15.5,rotation,side)
|
||||
cube([13,15.5,2]);
|
||||
}
|
||||
if(type == "microsdcard2" && side == "bottom" && rotation == 90) {
|
||||
place(loc_x+5,loc_y,loc_z-pcb_z,12,15.5,rotation,side)
|
||||
cube([12,15.5,2]);
|
||||
}
|
||||
if(type == "microsdcard2" && side == "bottom" && rotation == 180) {
|
||||
place(loc_x,loc_y+5,loc_z-pcb_z,12,15.5,rotation,side)
|
||||
cube([12,15.5,2]);
|
||||
}
|
||||
if(type == "microsdcard2" && side == "bottom" && rotation == 270) {
|
||||
place(loc_x+5,loc_y-18,loc_z-pcb_z,12,15.5,rotation,side)
|
||||
cube([12,15.5,2]);
|
||||
}
|
||||
if(type == "microsdcard2" && side == "top" && rotation == 0) {
|
||||
place(loc_x,loc_y-15,loc_z+1.75,12,15.5,rotation,side)
|
||||
cube([12,15.5,2]);
|
||||
}
|
||||
if(type == "microsdcard2" && side == "top" && rotation == 90) {
|
||||
place(loc_x-15,loc_y-.5,loc_z+1.75,12,15.5,rotation,side)
|
||||
cube([12,15.5,2]);
|
||||
}
|
||||
if(type == "microsdcard2" && side == "top" && rotation == 180) {
|
||||
place(loc_x-.5,loc_y+5,loc_z+1.75,12,15.5,rotation,side)
|
||||
cube([12,15.5,2]);
|
||||
}
|
||||
if(type == "microsdcard2" && side == "top" && rotation == 270) {
|
||||
place(loc_x+5,loc_y,loc_z+1.75,12,15.5,rotation,side)
|
||||
cube([12,15.5,2]);
|
||||
}
|
||||
// rj45 opening
|
||||
if(type == "rj45_single" && rotation == 0) {
|
||||
place(loc_x,loc_y-6,loc_z,16,17.5,rotation,side)
|
||||
@@ -2952,6 +2999,23 @@ module mask(loc_x,loc_y,loc_z,rotation,side,class,type,wallthick,gap,floorthick,
|
||||
place(loc_x+2,loc_y+1.5,loc_z-3.25,6,8,rotation,side)
|
||||
rotate([90,0,0]) slot(3.75,6,8);
|
||||
}
|
||||
// single vertical usbc opening
|
||||
if(class == "usbc" && type == "single_vertical" && rotation == 0 && side == "top") {
|
||||
place(loc_x+1.5,loc_y+2,loc_z+1.75,6,8,rotation,side)
|
||||
translate([.25,0,5.5]) rotate([90,90,0]) slot(3.75,5.5,8);
|
||||
}
|
||||
if(class == "usbc" && type == "single_vertical" && rotation == 90 && side == "top") {
|
||||
place(loc_x+2,loc_y+1.5,loc_z+1.75,6,8,rotation,side)
|
||||
translate([.25,0,5.5]) rotate([90,90,0]) slot(3.75,5.5,8);
|
||||
}
|
||||
if(class == "usbc" && type == "single_vertical" && rotation == 180 && side == "top") {
|
||||
place(loc_x+1.5,loc_y-3-adjust,loc_z+2,6,8,rotation,side)
|
||||
translate([.25,0,5.5]) rotate([90,90,0]) slot(3.75,5.5,8);
|
||||
}
|
||||
if(class == "usbc" && type == "single_vertical" && rotation == 270 && side == "top") {
|
||||
place(loc_x-3-adjust,loc_y+1.5,loc_z+1.75,6,8,rotation,side)
|
||||
translate([.25,0,5.5]) rotate([90,90,0]) slot(3.75,5.5,8);
|
||||
}
|
||||
// ir opening
|
||||
if(type == "ir_1" && rotation == 0) {
|
||||
place(loc_x,loc_y,loc_z,6,6,rotation,side)
|
||||
@@ -3075,56 +3139,56 @@ module mask(loc_x,loc_y,loc_z,rotation,side,class,type,wallthick,gap,floorthick,
|
||||
if(type == "jack_3.5" && rotation == 0 && side == "top") {
|
||||
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
||||
union() {
|
||||
translate([3.15,2,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||
translate([3.15,2,2]) rotate([90,0,0]) cylinder(d=6, h=8);
|
||||
translate([-.5,-.5,0]) cube([7.5,2.5,4.5]);
|
||||
}
|
||||
}
|
||||
if(type == "jack_3.5" && rotation == 90 && side == "top") {
|
||||
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
||||
union() {
|
||||
translate([4.1,2,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||
translate([4.1,2,2]) rotate([90,0,0]) cylinder(d=6, h=8);
|
||||
translate([.5,-.5,0]) cube([7.5,2.5,4.5]);
|
||||
}
|
||||
}
|
||||
if(type == "jack_3.5" && rotation == 180 && side == "top") {
|
||||
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
||||
union() {
|
||||
translate([4.1,-2.5,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||
translate([4.1,-2.5,2]) rotate([90,0,0]) cylinder(d=6, h=8);
|
||||
translate([.5,-5,0]) cube([7.5,2.5,4.5]);
|
||||
}
|
||||
}
|
||||
if(type == "jack_3.5" && rotation == 270 && side == "top") {
|
||||
place(loc_x,loc_y,loc_z,7.5,7.5,rotation,side)
|
||||
union() {
|
||||
translate([3.15,-2.5,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||
translate([3.15,-2.5,2]) rotate([90,0,0]) cylinder(d=6, h=8);
|
||||
translate([-.5,-5,0]) cube([7.5,2.5,4.5]);
|
||||
}
|
||||
}
|
||||
if(type == "jack_3.5" && rotation == 0 && side == "bottom") {
|
||||
place(loc_x-1,loc_y,loc_z-1.5,7.5,7.5,rotation,side)
|
||||
union() {
|
||||
translate([3.15,2,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||
translate([3.15,2,2]) rotate([90,0,0]) cylinder(d=6, h=8);
|
||||
translate([-.5,-.5,0]) cube([7.5,2.5,4.5]);
|
||||
}
|
||||
}
|
||||
if(type == "jack_3.5" && rotation == 90 && side == "bottom") {
|
||||
place(loc_x+4.1,loc_y,loc_z-1.5,7.5,7.5,rotation,side)
|
||||
union() {
|
||||
translate([4.1,2,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||
translate([4.1,2,2]) rotate([90,0,0]) cylinder(d=6, h=8);
|
||||
translate([.5,-.5,0]) cube([7.5,2.5,4.5]);
|
||||
}
|
||||
}
|
||||
if(type == "jack_3.5" && rotation == 180 && side == "bottom") {
|
||||
place(loc_x-1,loc_y,loc_z-1.5,7.5,7.5,rotation,side)
|
||||
union() {
|
||||
translate([4.1,-2.5,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||
translate([4.1,-2.5,2]) rotate([90,0,0]) cylinder(d=6, h=8);
|
||||
translate([.5,-5,0]) cube([7.5,2.5,4.5]);
|
||||
}
|
||||
}
|
||||
if(type == "jack_3.5" && rotation == 270 && side == "bottom") {
|
||||
place(loc_x+4.1,loc_y,loc_z-1.5,7.5,7.5,rotation,side)
|
||||
union() {
|
||||
translate([3,-2.5,2]) rotate([90,0,0]) cylinder(d=5, h=8);
|
||||
translate([3,-2.5,2]) rotate([90,0,0]) cylinder(d=6, h=8);
|
||||
translate([-.5,-5,0]) cube([7.5,2.5,4.5]);
|
||||
}
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user