added 5mm and 8mm hex vent, adjusted m1s cases, updated sbc model framework, fixed snap top protrusion placement and other fixes.

adjusted m1s shell, added m1s_shell_ups case, adjusted components and cooling options.
added odroid-m1s, added hex vent cooling option and made other changes.
2023-12-11 16:21:34 -05:00 · 2023-12-07 20:46:38 -05:00 · 2023-11-15 21:09:42 -05:00 · 2023-11-10 12:18:07 -05:00 · 2023-11-04 17:02:38 -04:00 · 2023-11-04 15:52:38 -04:00
11 changed files with 6906 additions and 2153 deletions
--- a/README.md
+++ b/README.md
@@ -3,7 +3,7 @@

 ## Introduction

-This project is about autonomous SBC case creation. It utilizes the SBC Model Framework project to automatically generate cases based on the data for any of the 53 current SBC contained within the framework. This allows legacy, current and future SBC to have multiple cases available on day one of their inclusion in the framework. There are multiple base case designs(shell, panel, stacked, tray, tray-sides, round, hex, snap, fitted) available and each allows for different styles within the design.
+This project is about autonomous SBC case creation. It utilizes the SBC Model Framework project to automatically generate cases based on the data for any of the 62 current SBC contained within the framework. This allows legacy, current and future SBC to have multiple cases available on day one of their inclusion in the framework. There are multiple base case designs(shell, panel, stacked, tray, tray-sides, round, hex, snap, fitted) available and each allows for different styles within the design.

 All case openings are created automatically based on SBC data and the dimensions of any case design can be expanded in any axis allowing for the creation of larger cases. If you reposition the SBC in a case, you will see i/o openings created or removed appropriately based on it’s proximity to the case geometry. These cases might be useful for prototypes or other in house uses to quickly and easily create standard, specialized and custom SBC cases thru different case designs, styles and accessories.

@@ -76,7 +76,7 @@ An array holds a string and 3 Boolean that represent which association and axis
 ### Accuracy
 In the past there was been no way of validating whether a SBC Model Framework model and it’s components were dimensionaly accurate in their size and placement other then trial and error. Along with producing cases this project provides a much needed model validation tool to assure model accuracy thru the use of test cases. It works on the very simple premise that if the real SBC fits the test case then the virtual model is accurate or otherwise shows were corrections are needed. This will further increased the overall accuracy of models.

-There are currently 47 SBC represented by 43 models, from 8 manufactures in SBC Model Framework.  Some SBC in SBC Model Framework have not been validated or may be missing component data and may produce one or more aspects of a case incorrectly.  SBC status is noted in sbc.png, the README.md file and at the beginning of the SBC entry defined in sbc_models.cfg, all a part of SBC Model Framework.  The color coded indicator of an SBC’s verification and completion as indicated in sbc.png is as follows:
+There are currently 58 SBC represented by 54 models, from 10 manufactures in SBC Model Framework.  Some SBC in SBC Model Framework have not been validated or may be missing component data and may produce one or more aspects of a case incorrectly.  SBC status is noted in sbc.png, the README.md file and at the beginning of the SBC entry defined in sbc_models.cfg, all a part of SBC Model Framework.  The color coded indicator of an SBC’s verification and completion as indicated in sbc.png is as follows:

 - GREEN = verified, complete and passes SBC Case Builder
 - YELLOW = unverified, mostlikely usable and/or missing minor information
@@ -103,9 +103,9 @@ Template creation and i/o panel layouts in a dxf format can be easily created an
 ### Case Designs and Styles
 The case naming convention for standard cases in the configuration file follow the basic form of “sbc”_”design”_”style” e.g. c4_shell or c4_tray_vu5.

-#### Current Case Count 423
+#### Current Case Count 457

-##### Hardkernel - 182
+##### Hardkernel - 194

 **Odorid-C1+ cases** - 16 : c1+_shell, c1+_panel, c1+_panel_lcd3.5, c1+_desktop_lcd3.5, c1+_stacked, c1+_tray, c1+_tray_sides, c1+_tray_vu5, 
 c1+_tray_vu7, c1+_shell_boombox, c1+_panel_boombox, c1+_tray_boombox, c1+_round, c1+_hex, c1+_snap, c1+_fitted
@@ -129,6 +129,8 @@ c4_tray_vu7, c4_shell_boombox, c4_panel_boombox, c4_deskboom_lcd3.5, c4_tray_boo

 **Odorid-N2LQ cases** - 9 :n2lq_shell, n2lq_panel, n2lq_stacked, n2lq_tray, n2lq_tray_sides, n2lq_tray_vu5, n2lq_tray_vu7, n2lq_snap, n2lq_fitted

+**Odorid-M1S cases** - 12 : m1s_shell, m1s_shell_nvme, m1s_shell_ups, m1s_panel, m1s_stacked, m1s_tray, m1s_tray_ups, m1s_tray_vu5, m1s_tray_vu7, m1s_tray_sides, m1s_snap, m1s_fitted
+
 **Odorid-M1 cases** - 12 : m1_panel, m1_tray, m1_tray_drive, m1_tray_sides, m1_tray_vu5, m1_tray_vu7, m1_snap, m1_fitted, m1_fitted_drivebox2.5, m1_fitted_drivebox3.5, m1_fitted_pizzabox, m1_fitted_drivebox3.5v

 **Odorid-XU4 cases** - 11 : xu4_shell, xu4_panel, xu4_stacked, xu4_tray, xu4_tray_sides, xu4_tray_vu5, xu4_tray_vu7, xu4_round, xu4_hex, xu4_snap, xu4_fitted
@@ -154,6 +156,9 @@ c4_tray_vu7, c4_shell_boombox, c4_panel_boombox, c4_deskboom_lcd3.5, c4_tray_boo

 **h64b** - 2 : h64b_shell, h64b_panel

+**star64** - 1 : star64_shell
+
+
 ##### Raspberry PI - 72

 **RPIzero** - 9 : rpizero_shell, rpizero_panel, rpizero_stacked, rpizero_tray, rpizero_tray_sides, rpizero_round, rpizero_hex, rpizero_snap, rpizero_fitted
@@ -178,15 +183,15 @@ c4_tray_vu7, c4_shell_boombox, c4_panel_boombox, c4_deskboom_lcd3.5, c4_tray_boo
 **Jetson Nano** - 9 : jetsonnano_shell, jetsonnano_panel, jetsonnano_stacked, jetsonnano_tray, jetsonnano_tray_sides, jetsonnano_round, jetsonnano_hex, jetsonnano_snap, jetsonnano_fitted


-##### Radxa - 36
+##### Radxa - 37

-**ROCKPi 4b+** - 9 : rockpi4b+_shell, rockpi4b+_panel, rockpi4b+_stacked, rockpi4b+_tray, rockpi4b+_tray_sides, rockpi4b+_round, rockpi4b+_hex, rockpi4b+_snap, rockpi4b+_fitted
+**ROCK 4b+** - 9 : rock4b+_shell, rock4b+_panel, rock4b+_stacked, rock4b+_tray, rock4b+_tray_sides, rock4b+_round, rock4b+_hex, rock4b+_snap, rock4b+_fitted

-**ROCKPi 4c** - 9 : rockpi4c_shell, rockpi4c_panel, rockpi4c_stacked, rockpi4c_tray, rockpi4c_tray_sides, rockpi4c_round, rockpi4c_hex, rockpi4c_snap, rockpi4c_fitted
+**ROCK 4c** - 9 : rock4c_shell, rock4c_panel, rock4c_stacked, rock4c_tray, rock4c_tray_sides, rock4c_round, rock4c_hex, rock4c_snap, rock4c_fitted

-**ROCKPi 4c+** - 9 : rockpi4c+_shell, rockpi4c+_panel, rockpi4c+_stacked, rockpi4c+_tray, rockpi4c+_tray_sides, rockpi4c+_round, rockpi4c+_hex, rockpi4c+_snap, rockpi4c+_fitted
+**ROCK 4c+** - 9 : rock4c+_shell, rock4c+_panel, rock4c+_stacked, rock4c+_tray, rock4c+_tray_sides, rock4c+_round, rock4c+_hex, rock4c+_snap, rock4c+_fitted

-**ROCKPi5b** - 9 : rockpi5b_shell, rockpi5b_panel, rockpi5b_stacked, rockpi5b_tray, rockpi5b_tray_sides, rockpi5b_round, rockpi5b_hex, rockpi5b_snap, rockpi5b_fitted
+**ROCK 5b** - 10 : rock5b_shell,rock5b_shell-v1.3, rock5b_panel, rock5b_stacked, rock5b_tray, rock5b_tray_sides, rock5b_round, rock5b_hex, rock5b_snap, rock5b_fitted


 ##### Khadas - 45
@@ -213,15 +218,31 @@ c4_tray_vu7, c4_shell_boombox, c4_panel_boombox, c4_deskboom_lcd3.5, c4_tray_boo
 **Tinkerboard R2/R2S** - 9 : tinkerboard-r2_shell, tinkerboard-r2_panel, tinkerboard-r2_stacked, tinkerboard-r2_tray, tinkerboard-r2_tray_sides, tinkerboard-r2_round, tinkerboard-r2_hex, tinkerboard-r2_snap, tinkerboard-r2_fitted


-##### Orange PI - 27
+##### Orange PI - 34
+
+**OPI 5** - 7 : opi5_shell, opi5_panel, opi5_stacked, opi5_tray, opi5_tray_sides, opi5_snap, opi5_fitted

 **OPI Zero/ZeroPlus** - 9 : opizero_shell, opizero_panel, opizero_stacked, opizero_tray, opizero_tray_sides, opizero_round, opizero_hex, opizero_snap, opizero_fitted

 **OPI Zero2** - 9 : opizero2_shell, opizero2_panel, opizero2_stacked, opizero2_tray, opizero2_tray_sides, opizero2_round, opizero2_hex, opizero2_snap, opizero2_fitted

+**OPI R1** - 1 : opir1_shell 
+
 **OPI R1PlusLTS** - 9 : opir1plus_lts_shell, opir1plus_lts_panel, opir1plus_lts_stacked, opir1plus_lts_tray, opir1plus_lts_tray_sides, opir1plus_lts_round, opir1plus_lts_hex, opir1plus_lts_snap, opir1plus_lts_fitted


+##### Sipeed - 1
+
+**licheerv+dock** - 0 : 
+
+
+##### StarFive - 14
+
+**visionfive2** - 7 : visionfive2_shell, visionfive2_panel, visionfive2_stacked, visionfive2_tray, visionfive2_tray_sides, visionfive2_snap, visionfive2_fitted
+
+**visionfive2q** - 7 : visionfive2q_shell, visionfive2q_panel, visionfive2q_stacked, visionfive2q_tray, visionfive2q_tray_sides, visionfive2q_snap, visionfive2q_fitted
+
+
 ### Accessory Schema
 The schema for case accessories is documented in the beginning of the file sbc_case_builder_accessories.cfg. There is one fixed entry that is the accessory set name followed by an unlimited number of accessory entries each containing 15 entries.
 ```
@@ -323,6 +344,13 @@ description: circlular geometry.
 *uses:* data_1=scale, data_2=height, data_3=file


+**keyhole**
+
+*description:* enclosed keyhole
+
+*uses:* data4=[head_dia, slot_width, slot_length, floor_thick]
+
+

 #### Add class only “types”

@@ -424,6 +452,13 @@ description: circlular geometry.
 *uses:* data_1=tolorence


+**nut_holder**
+
+*description:* nut holder
+
+*uses:* size_x=top diameter or x size in mm, size_y=bottom diameter or y size in mm, size_z=holder height in mm, data_0="m2" or "m2.5" or "m3" or "m4", data_1="default" or "sloped" or "trap"
+
+
 #### Sub class only “types”


@@ -438,7 +473,15 @@ description: circlular geometry.

 *description:* horizontal or vertical vent openings

-*uses:* size_x=open_width, size_y=open_length, size_z=thick, data_4=gap, data_1=rows, data_3=columns,
+*uses:* size_x=open_width, size_y=open_length, size_z=thick, data_1=rows, data_2=columns,
+data_3=orientation("vertical","horizontal"), data_4=gap
+
+
+**vent_hex**(cells_x, cells_y, cell_size, cell_spacing, orientation)
+
+*description:* horizontal or vertical hex vent openings
+
+*uses:* size_x=cells_x, size_y=cells_y, size_z=thick, data_1=cell_size, data_2=cell_spacing, 
 data_3=orientation("vertical","horizontal")


@@ -593,6 +636,34 @@ data_3=orientation("vertical","horizontal")
 *uses:* none


+**h3_port_extender**
+
+*description:* h3 usb port extender model
+
+*uses:* data_3="header" or "remote"
+
+
+**hk_pwr_button**
+
+*description:* hk power button model
+
+*uses:* none
+
+
+**dsub**
+
+*description:* d-sub connectors
+
+*uses:* data4=[pin, type("male" or "female"), floor_thick]
+
+
+**vent_panel_hex**
+
+*description:* cover for vent opening, honeycomb pattern
+
+*uses:* size_x=x, size_y=y, size_z=thick,
+        data1=cell_size, data2=cell_spacing, 
+        data3="x", "y", "none", or "default", data4=border

 #### Platter class “types”

@@ -630,3 +701,13 @@ data_3=orientation("vertical","horizontal")
 *description:* hk stereo boom bonnet volume wheel extention

 *uses:* data_1=tolerence
+
+
+**vent_panel_hex**
+
+*description:* cover for vent opening, honeycomb pattern
+
+*uses:* size_x=x, size_y=y, size_z=thick,
+        data1=cell_size, data2=cell_spacing, 
+        data3="x", "y", "none", or "default", data4=border
+
--- a/2
+++ b/2
--- a/sbc_case_builder.json
+++ b/sbc_case_builder.json
--- a/sbc_case_builder.scad
+++ b/sbc_case_builder.scad
--- a/sbc_case_builder_accessories.cfg
+++ b/sbc_case_builder_accessories.cfg
@@ -31,7 +31,7 @@
      
    types for additive:    circle,rectangle,slot,text,art,button,standoff,batt_holder,uart_holder,hd_holder,hd_vertleft_holder,
                           hd_vertright_holder,hc4_oled_holder,access_port,button,pcb_holder,boom_grill,boom_speaker_holder
-    types for subtractive: circle,rectangle,slot,text,art,punchout,vent,fan,hd_holes,hd_vertleft_holes,hd_vertright_holes,microusb,sphere
+    types for subtractive: circle,rectangle,slot,text,art,punchout,vent,vent_hex,fan,hd_holes,hd_vertleft_holes,hd_vertright_holes,microusb,sphere
    types for model:       uart_strap,fan_cover,hd25,hd35,hc4_oled,feet,button_top,access_cover,net_card,hk35_lcd,hk_boom,boom_speaker,boom_vring,hk_uart
    types for platter:     uart_strap,fan_cover,button_top,boom_vring

@@ -51,6 +51,13 @@

 accessory_data = [
             ["none"],
+              
+             // hk uart group
+             ["hk_uart",
+             "add2","uart_holder",-25,0,1.9,"bottom",[0,0,0],["sbc",true,false,false],10,10,0,0,0,"",0,                                 // add uart holder
+             "model","hk_uart",-22.5,23,5,"bottom",[0,0,-90],["sbc",true,false,false],10,10,0,0,0,"",0,                                 // add uart model
+             "model","uart_strap",-25,0,2,"bottom",[0,0,0],["sbc",true,false,false],0,0,0,0,0,"",0, 
+             "platter","uart_strap",-35,75,-9,"bottom",[0,0,0],["case",false,false,false],0,0,0,0,0,"",0],                               // hk uart strap

             // Odroid-C1+
             ["c1+_shell_boombox",
@@ -378,6 +385,11 @@ accessory_data = [
             "suball","round",10.5,-2,14.5,"top",[90,0,0],["case",false,false,false],11,0,18,0,0,"",0,                                  // sub power plug hole
             "suball","rectangle",35,-26,4,"top",[0,0,0],["case",false,false,false],21,10,15.5,0,0,"vertical",[1,1,1,1]],               // sub hdmi opening

+             // Odroid-XU4
+             ["xu4_keyhole",
+             "add1","keyhole",40,30,0,"bottom",[0,0,0],["case",false,false,false],0,0,0,0,0,"",[7,3.2,6,2],                              // keyhole
+             "sub","keyhole",40,30,0,"bottom",[0,0,0],["case",false,false,false],0,0,0,0,0,"",[7,3.2,6,2]],                              // keyhole
+
             
             // Odroid-HC4
             ["hc4_tray_drivebox2.5",
@@ -459,12 +471,78 @@ accessory_data = [
             ["n2l_tray",
             "sub","rectangle",65,36,-2.5,"bottom",[0,0,0],["case",true,true,true],5,13,15.5,0,0,"vertical",[1,1,1,1]],                 // sub hdmi opening

+             ["n2l_gpio",
+             "sub","vent",22,-1.99,16,"top",[0,0,0],["sbc-case_z",true,true,true],2,9,8,1,10,"vertical",1,                              // vent opening
+             "sub","fan",20,8,24.5,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0,                                         // sub fan opening
+             "sub","rectangle",8.5,49,9.9,"top",[0,0,0],["sbc",true,true,true],56,18,20,0,0,"vertical",[1,1,1,1]],                      // gpio opening
+
             // Odroid-N2+
             // internal fan
             ["n2+_tray_vu7_fan",
             "sub","vent",25,25,44,"top",[0,0,0],["case",false,false,false],10,2,4,6,6,"horizontal",1,                                  // sub vent
             "sub","vent",25,50,44,"top",[0,0,0],["case",false,false,false],10,2,4,6,6,"horizontal",1],                                 // sub vent

+             // Odroid-M1S
+             ["m1s_shell",
+             "sub","vent_hex",10,29,-1,"bottom",[0,0,0],["sbc",true,true,false],21,5,8,5,1.5,"horizontal",1,                            // vent opening
+             "sub","rectangle",73.5,5.5,3.5,"top",[0,0,45],["sbc",true,true,true],11,3,15,0,0,"vertical",[1,1,1,1],                     // standoff trim
+             "sub","rectangle",5.5,56,3.5,"top",[0,0,0],["sbc-case_z",true,true,true],3,11,15,0,0,"vertical",[1,1,1,1],                 // standoff trim
+             "sub","rectangle",81.5,56,3.5,"top",[0,0,0],["sbc-case_z",true,true,true],3,11,15,0,0,"vertical",[1,1,1,1],                // standoff trim
+             "sub","rectangle",17.5,12,3.5,"top",[0,0,0],["sbc-case_z",true,true,true],11,3,15,0,0,"vertical",[1,1,1,1]],               // standoff trim
+
+             ["m1s_shell_nvme",
+             "add1","access_port",-7.5,28,-0.01,"bottom",[0,0,0],["sbc",true,true,false],105,30,1.5,0,0,"landscape",0,                  // access port
+             "model","access_cover",-7.5,28,-0.01,"bottom",[0,0,0],["sbc",true,true,false],105,30,1.5,0,0,"landscape",0,                // access port cover
+             "platter","access_cover",-20,0,0,"bottom",[0,0,90],["case",false,false,false],105,30,1.5,0,0,"landscape",0,                // access port cover
+             "sub","vent_hex",37,5,-1,"bottom",[0,0,0],["sbc",false,false,false],11,3,5,5,1.5,"horizontal",1,                           // vent opening
+             "sub","vent_hex",0,5,-1,"bottom",[0,0,0],["sbc",false,false,false],7,3,5,5,1.5,"horizontal",1,                             // vent opening
+             "sub","vent_hex",87,5,-1,"bottom",[0,0,0],["sbc",false,false,false],3,3,5,5,1.5,"horizontal",1,                            // vent opening
+             "sub","vent_hex",21,60,-1,"bottom",[0,0,0],["sbc",false,false,false],20,1,5,5,1.5,"horizontal",1,                          // vent opening
+             "sub","rectangle",73.5,5.5,3.5,"top",[0,0,45],["sbc-case_z",true,true,true],11,3,15,0,0,"vertical",[1,1,1,1],              // standoff trim
+             "sub","rectangle",5.5,56,3.5,"top",[0,0,0],["sbc-case_z",true,true,true],3,11,15,0,0,"vertical",[1,1,1,1],                 // standoff trim
+             "sub","rectangle",81.5,56,3.5,"top",[0,0,0],["sbc-case_z",true,true,true],3,11,15,0,0,"vertical",[1,1,1,1],                // standoff trim
+             "sub","rectangle",17.5,12,3.5,"top",[0,0,0],["sbc-case_z",true,true,true],11,3,15,0,0,"vertical",[1,1,1,1]],               // standoff trim
+
+             ["m1s_shell_ups",
+             "sub","vent_hex",0,5,17,"top",[0,0,0],["case",false,false,true],9,21,8,5,1.5,"horizontal",1,                              // vent opening
+             "model","hk_m1s_ups",-1,122.5,5,"bottom",[0,0,270],["sbc",false,false,false],0,0,0,0,0,"",0,                               // hk m1s ups
+             "sub","slot",-45,17.5,8.5,"bottom",[90,0,90],["sbc",true,true,true],4.25,6.125,12,0,0,"",[.25,.25,.25,.25],               // usb-c opening
+             "add2","standoff",2.5,11,0,"bottom",[0,0,0],["sbc",false,false,false],0,0,0,0,0,0,[5.75,5,3.6,10,4,1,0,0,0,4.5,5.1],       // standoff
+             "add2","standoff",27.5,11,0,"bottom",[0,0,0],["sbc",false,false,false],0,0,0,0,0,0,[5.75,5,3.6,10,4,1,0,0,0,4.5,5.1],      // standoff
+             "add2","standoff",2.5,119,0,"bottom",[0,0,0],["sbc",false,false,false],0,0,0,0,0,0,[5.75,5,3.6,10,4,1,0,0,0,4.5,5.1],      // standoff
+             "add2","standoff",27.5,119,0,"bottom",[0,0,0],["sbc",false,false,false],0,0,0,0,0,0,[5.75,5,3.6,10,4,1,0,0,0,4.5,5.1],     // standoff
+             "add1","access_port",-4,28,-0.01,"bottom",[0,0,0],["sbc",true,true,false],105,30,2,0,0,"landscape",0,                      // access port
+             "model","access_cover",-4,28,-0.01,"bottom",[0,0,0],["sbc",true,true,false],105,30,2,0,0,"landscape",0,                    // access port cover
+             "platter","access_cover",-10,16.25,0,"bottom",[0,0,90],["case",false,false,false],105,30,2,0,0,"landscape",0,              // access port cover
+             "add2","button",2,33.5,21,"top",[0,0,0],["sbc-case_z",false,false,true],10,0,23.5,0,0,"recess",0,                          // button
+             "model","button_top",2,33.5,21,"top",[0,0,0],["sbc-case_z",false,false,true],10,0,23.5,0,0,"recess",0,                     // button top
+             "platter","button_top",-20,0,0,"top",[0,0,0],["case",false,false,false],10,0,23.5,0,0,"recess",0,                          // button top
+             "sub","rectangle",73.5,5.5,3.5,"top",[0,0,45],["sbc",true,true,true],11,3,15,0,0,"vertical",[1,1,1,1],                     // standoff trim
+             "sub","rectangle",5.5,56,3.5,"top",[0,0,0],["sbc",true,true,true],3,11,15,0,0,"vertical",[1,1,1,1],                        // standoff trim
+             "sub","rectangle",81.5,56,3.5,"top",[0,0,0],["sbc",true,true,true],3,11,15,0,0,"vertical",[1,1,1,1],                       // standoff trim
+             "sub","rectangle",17.5,12,3.5,"top",[0,0,0],["sbc",true,true,true],11,3,15,0,0,"vertical",[1,1,1,1]],                      // standoff trim
+
+             ["m1s_panel",
+             "sub","vent_hex",10,29,-1,"bottom",[0,0,0],["sbc",true,true,false],21,5,8,5,1.5,"horizontal",1],                            // vent opening
+             
+             ["m1s_tray_nvme",
+             "add1","access_port",-12,26.25,-0.01,"bottom",[0,0,180],["sbc",true,true,false],102,30,2,0,0,"landscape",0,                // access port
+             "model","access_cover",-12,26.25,-0.01,"bottom",[0,0,180],["sbc",true,true,false],102,30,2,0,0,"landscape",0,              // access port cover
+             "platter","access_cover",-88,26.25,0,"bottom",[0,0,0],["case",false,false,false],102,30,2,0,0,"landscape",0,               // access port cover
+             "sub","vent_hex",30,5,-1,"bottom",[0,0,0],["sbc",true,true,false],11,3,5,5,1.5,"horizontal",1,                             // vent opening
+             "sub","vent_hex",-10,5,-1,"bottom",[0,0,0],["sbc",true,true,false],7,3,5,5,1.5,"horizontal",1,                             // vent opening
+             "sub","vent_hex",79,5,-1,"bottom",[0,0,0],["sbc",true,true,false],3,3,5,5,1.5,"horizontal",1,                              // vent opening
+             "sub","rectangle",73.5,5.5,3.5,"top",[0,0,45],["sbc",true,true,true],11,3,15,0,0,"vertical",[1,1,1,1],                     // standoff trim
+             "sub","rectangle",5.5,56,3.5,"top",[0,0,0],["sbc",true,true,true],3,11,15,0,0,"vertical",[1,1,1,1],                        // standoff trim
+             "sub","rectangle",81.5,56,3.5,"top",[0,0,0],["sbc",true,true,true],3,11,15,0,0,"vertical",[1,1,1,1],                       // standoff trim
+             "sub","rectangle",17.5,12,3.5,"top",[0,0,0],["sbc",true,true,true],11,3,15,0,0,"vertical",[1,1,1,1]],                      // standoff trim
+
+             ["m1s_snap",
+             "sub","vent_hex",10,29,-1,"bottom",[0,0,0],["sbc",true,true,false],21,5,8,5,1.5,"horizontal",1],                            // vent opening
+
+             ["m1s_fitted",
+             "sub","vent_hex",10,29,-1,"bottom",[0,0,0],["sbc",true,true,false],21,5,8,5,1.5,"horizontal",1],                            // vent opening
+
             // Odroid-M1
             ["m1_panel",
             "sub","vent",29,20,-1,"bottom",[0,0,0],["sbc",true,true,false],2,15,8,5,12,"horizontal",1,                                 // vent opening
@@ -823,7 +901,7 @@ accessory_data = [
             "sub","vent",111.5,30,28,"top",[0,0,90],["case",true,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
             "sub","vent",-3.5,30,4,"bottom",[0,0,90],["case",false,false,false],2,6,4,1,17,"vertical",1,                               // vent opening
             "sub","vent",111.5,30,4,"bottom",[0,0,90],["case",true,false,false],2,6,4,1,17,"vertical",1,                               // vent opening
-             "sub","fan",99,10,48,"top",[0,0,90],["sbc-case_z",true,true,true],90,0,6,2,0,"",0,                                             // fan opening
+             "sub","fan",99,10,48,"top",[0,0,90],["sbc-case_z",true,true,true],90,0,6,2,0,"",0,                                         // fan opening
             "add2","batt_holder",113.5,45,20,"top",[90,0,270],["sbc-case_z",true,true,true],10,10,0,0,0,"",0,                          // add battery holder
             "add1","access_port",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0,                      // access port
             "add2","button",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,53,0,0,"recess",0,                        // button
@@ -835,14 +913,14 @@ accessory_data = [
             "platter","button_top",-30,0,0,"top",[0,0,0],["case",false,false,false],10,0,58,0,0,"recess",0,                            // button top
             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0],                // access port cover

-              ["h3_tallboy-ssd",
+             ["h3_tallboy-ssd",
             "sub","vent",-3.5,30,58,"top",[0,0,90],["case",false,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
             "sub","vent",111.5,30,58,"top",[0,0,90],["case",true,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
             "sub","vent",-3.5,30,28,"top",[0,0,90],["case",false,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
             "sub","vent",111.5,30,28,"top",[0,0,90],["case",true,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
             "sub","vent",-3.5,30,4,"bottom",[0,0,90],["case",false,false,false],2,6,4,1,17,"vertical",1,                               // vent opening
             "sub","vent",111.5,30,4,"bottom",[0,0,90],["case",true,false,false],2,6,4,1,17,"vertical",1,                               // vent opening
-             "sub","fan",99,10,48,"top",[0,0,90],["sbc-case_z",true,true,true],90,0,6,2,0,"",0,                                             // fan opening
+             "sub","fan",99,10,48,"top",[0,0,90],["sbc-case_z",true,true,true],90,0,6,2,0,"",0,                                         // fan opening
             "add1","access_port",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0,                      // access port
             "add2","button",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,53,0,0,"recess",0,                        // button
             "add2","button",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,53,0,0,"recess",0,                        // button
@@ -851,13 +929,96 @@ accessory_data = [
             "model","access_cover",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0,                    // access port cover
             "platter","button_top",-20,0,0,"top",[0,0,0],["case",false,false,false],10,0,58,0,0,"recess",0,                            // button top
             "platter","button_top",-30,0,0,"top",[0,0,0],["case",false,false,false],10,0,58,0,0,"recess",0,                            // button top
-             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0,                // access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0,                 // access port cover
             "sub","round",111,34,6.07,"bottom",[0,90,0],["case",true,false,false],3,0,3,0,0,"",0,                                      // sub hd side screw hole
             "sub","round",111,110.6,6.07,"bottom",[0,90,0],["case",true,false,false],3,0,3,0,0,"",0,                                   // sub hd side screw hole
-             "add2","hd_vertleft",98,10,1.99,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0,                       // add hd holder
-             "sub","hd_vertleft_holes",98,10,-.01,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0,                  // sub hd bottom holes
+             "add2","hd_vertleft",98,10,1.99,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0,                        // add hd holder
+             "sub","hd_vertleft_holes",98,10,-.01,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0,                   // sub hd bottom holes
             "model","hd25",98,110,2,"bottom",[90,0,-90],["case",true,true,false],0,0,0,7,0,"",0],                                      // model 2.5 hd

+             ["h3_ultimate",
+             "sub","vent",-3.5,30,58,"top",[0,0,90],["case",false,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
+             "sub","vent",111.5,30,58,"top",[0,0,90],["case",true,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
+             "sub","vent",-3.5,30,19,"top",[0,0,90],["case",false,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
+             "sub","vent",111.5,30,28,"top",[0,0,90],["case",true,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
+             "sub","vent",-3.5,30,4,"bottom",[0,0,90],["case",false,false,false],2,6,4,1,17,"vertical",1,                               // vent opening
+             "sub","vent",111.5,30,4,"bottom",[0,0,90],["case",true,false,false],2,6,4,1,17,"vertical",1,                               // vent opening
+             "sub","fan",99,10,48,"top",[0,0,90],["sbc-case_z",true,true,true],90,0,6,2,0,"",0,                                         // fan opening
+             "sub","round",3.81,17.78,29,"top",[0,0,0],["sbc-case_z",true,true,true],6.5,0,26,0,0,"",0,                                 // sub screw hole
+             "sub","round",3.81,106.19,29,"top",[0,0,0],["sbc-case_z",true,true,true],6.5,0,26,0,0,"",0,                                // sub screw hole
+             "sub","round",106.04,24.77,29,"top",[0,0,0],["sbc-case_z",true,true,true],6.5,0,26,0,0,"",0,                               // sub screw hole
+             "sub","round",106.04,106.2,29,"top",[0,0,0],["sbc-case_z",true,true,true],6.5,0,26,0,0,"",0,                               // sub screw hole
+             "model","h3_port_extender",6,70,18.5,"bottom",[0,0,0],["sbc",true,true,false],0,0,0,0,0,"header",0,                        // h3 port extender
+             "sub","h3_port_extender",6,70,18.5,"top",[0,0,0],["sbc",true,true,false],0,0,0,0,0,"header",0,                             // h3 port extender
+             "model","hk_pwr_button",20,110,53,"top",[0,0,0],["sbc-case_z",true,true,true],0,0,0,0,0,0,0,                               // hk pwr button model
+             "sub","hk_pwr_button",20,110,53,"top",[0,0,0],["sbc-case_z",true,true,true],0,0,0,0,0,0,0,                                 // hk pwr button model
+//             "add2","button",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,53,0,0,"recess",0,                        // button
+//             "add2","button",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,53,0,0,"recess",0,                        // button
+//             "model","button_top",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,58,0,0,"recess",0,                   // button top
+//             "model","button_top",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,58,0,0,"recess",0,                   // button top
+//             "platter","button_top",-20,0,0,"top",[0,0,0],["case",false,false,false],10,0,58,0,0,"recess",0,                            // button top
+//             "platter","button_top",-30,0,0,"top",[0,0,0],["case",false,false,false],10,0,58,0,0,"recess",0,                            // button top
+             "add1","access_port",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,true],100,80,2,0,0,"landscape",0,                       // access port
+             "model","access_cover",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0,                    // access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0,                 // access port cover
+             "sub","round",111,34,6.07,"bottom",[0,90,0],["case",true,false,false],3,0,3,0,0,"",0,                                      // sub hd side screw hole
+             "sub","round",111,110.6,6.07,"bottom",[0,90,0],["case",true,false,false],3,0,3,0,0,"",0,                                   // sub hd side screw hole
+             "add2","hd_vertleft",98,10,1.99,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0,                        // add hd holder
+             "sub","hd_vertleft_holes",98,10,-.01,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0,                   // sub hd bottom holes
+             "model","hd25",98,110,2,"bottom",[90,0,-90],["case",true,true,false],0,0,0,7,0,"",0],                                      // model 2.5 hd
+
+             ["h3_ultimate2",
+             "suball","fan",0,25,3,"top",[0,270,0],["case",false,false,false],60,0,6,1,0,"",0,                                          // sub fan opening
+             "model","fan_cover",-4,25,3,"top",[0,270,0],["case",false,false,false],60,0,3,2,0,"",0,                                    // model fan cover
+             "platter","fan_cover",-100,150,0,"top",[0,0,0],["case",false,false,false],60,0,3,2,0,"",0,                                 // model fan cover
+             "model","vent_panel_hex",144,11.77,64,"top",[0,90,0],["case",false,false,false],62,107.43,3,5.0,1.6,"y",14,                // model vent cover
+             "platter","vent_panel_hex",-200,13.77,0,"top",[0,0,0],["case",false,false,false],62,107.43,3,5.0,1.6,"y",14,               // model vent cover
+             "suball","rectangle",111,26.77,62,"top",[0,90,0],["case",true,false,false],58,77.43,4,0,0,"",[2,2,2,2],                    // vent opening
+             "sub","round",111,16.57,57,"top",[0,90,0],["case",true,false,false],7,0,4,0,0,"",0,                                        // vent cover screw hole
+             "sub","round",111,16.57,9,"bottom",[0,90,0],["case",true,false,false],7,0,4,0,0,"",0,                                      // vent cover screw hole
+             "sub","round",111,114.4,57,"top",[0,90,0],["case",true,false,false],7,0,4,0,0,"",0,                                        // vent cover screw hole
+             "sub","round",111,114.4,9,"bottom",[0,90,0],["case",true,false,false],7,0,4,0,0,"",0,                                      // vent cover screw hole
+             "sub","round",3.81,17.78,35,"top",[0,0,0],["sbc-case_z",true,true,true],6.5,0,19,0,0,"",0,                                 // sub screw hole
+             "sub","round",3.81,106.19,35,"top",[0,0,0],["sbc-case_z",true,true,true],6.5,0,19,0,0,"",0,                                // sub screw hole
+             "sub","round",106.04,24.77,35,"top",[0,0,0],["sbc-case_z",true,true,true],6.5,0,19,0,0,"",0,                               // sub screw hole
+             "sub","round",106.04,106.2,35,"top",[0,0,0],["sbc-case_z",true,true,true],6.5,0,19,0,0,"",0,                               // sub screw hole
+             "add2","nut_holder",144,16.57,57,"top",[0,270,0],["case",false,false,false],8,16,5,"m3","sloped",0,0,                      // vent cover nut holder
+             "add2","nut_holder",144,16.57,9 ,"bottom",[0,270,0],["case",false,false,false],8,16,5,"m3","sloped",0,0,                   // vent cover nut holder
+             "add2","nut_holder",144,114.4,57,"top",[0,270,0],["case",false,false,false],8,16,5,"m3","sloped",0,0,                      // vent cover nut holder 
+             "add2","nut_holder",144,114.4,9 ,"bottom",[0,270,0],["case",false,false,false],8,16,5,"m3","sloped",0,0,                   // vent cover nut holder
+             "sub","rectangle",-4,100.5,3,"top",[0,0,0],["sbc-case_z",true,true,true],14,4,20,0,0,"",[1,1,1,1],                         // sub rectangle
+             "sub","rectangle",100.5,17,30,"top",[0,0,0],["sbc-case_z",true,true,true],9,4,10,0,0,"",[1,1,1,1],                         // sub rectangle
+             "add1","round",23,111.5,4,"top",[0,0,0],["case",true,true,true],4,0,47,0,0,"",0,                                           // wall support
+             "add1","round",71,111.5,4,"top",[0,0,0],["case",true,true,true],4,0,47,0,0,"",0,                                           // wall support
+             "add1","round",-31.5,3,4,"top",[0,0,0],["case",true,true,true],4,0,47,0,0,"",0,                                            // wall support
+             "add1","round",-31.5,77,4,"top",[0,0,0],["case",true,true,true],4,0,47,0,0,"",0,                                           // wall support
+             "add1","round",-10,111.5,4,"top",[0,0,0],["case",true,true,true],4,0,47,0,0,"",0,                                          // wall support
+             "add1","round",101,111.5,4,"top",[0,0,0],["case",true,true,true],4,0,47,0,0,"",0,                                          // wall support
+             "add1","round",91.25,-16.5,4,"top",[0,0,0],["case",true,true,true],4,0,47,0,0,"",0,                                        // wall support
+             "add1","round",66.25,-16.5,4,"top",[0,0,0],["case",true,true,true],4,0,47,0,0,"",0,                                        // wall support
+             "add1","round",42.25,-16.5,4,"top",[0,0,0],["case",true,true,true],4,0,47,0,0,"",0,                                        // wall support
+             "add1","round",16.25,-16.5,4,"top",[0,0,0],["case",true,true,true],4,0,47,0,0,"",0,                                        // wall support
+             "add1","round",-1,-16.5,4,"top",[0,0,0],["case",true,true,true],4,0,47,0,0,"",0,                                           // wall support
+             "add1","round",-29,109,4,"top",[0,0,0],["case",true,true,true],3,0,47,0,0,"",0,                                            // wall support
+             "add1","round",-29,-14,4,"top",[0,0,0],["case",true,true,true],3,0,47,0,0,"",0,                                            // wall support
+             "add1","round",109,109,4,"top",[0,0,0],["case",true,true,true],3,0,47,0,0,"",0,                                            // wall support
+             "add1","rectangle",2,7,49,"top",[0,0,0],["case",true,true,true],4,80,3,0,0,"",[.25,.25,.25,.25],                           // ceiling support
+             "add1","rectangle",27,-16.5,49,"top",[0,0,0],["case",true,true,true],4,130,3,0,0,"",[.25,.25,.25,.25],                     // ceiling support
+             "add1","rectangle",52,-16.5,49,"top",[0,0,0],["case",true,true,true],4,130,3,0,0,"",[.25,.25,.25,.25],                     // ceiling support
+             "add1","rectangle",77,-16.5,49,"top",[0,0,0],["case",true,true,true],4,130,3,0,0,"",[.25,.25,.25,.25],                     // ceiling support
+             "add1","rectangle",104,7,49,"top",[0,0,0],["case",true,true,true],4,80,3,0,0,"",[.25,.25,.25,.25],                         // ceiling support
+             "model","h3_port_extender",31,119,4,"top",[0,0,-90],["case",true,false,true],0,0,0,0,0,"remote",0,                         // port extender model
+             "sub","h3_port_extender",31,119,4,"top",[0,0,-90],["case",true,false,true],0,0,0,0,0,"remote",0,                           // port extender openings
+             "model","h3_port_extender_holder",31,119,4,"top",[0,0,-90],["case",true,false,true],0,0,0,2.5,0,"both",0,                  // port extender holder
+             "platter","h3_port_extender_holder",-170,150,0,"top",[0,0,-90],["case",true,false,true],0,0,0,2.5,0,"remote",0,            // port extender holder
+             "model","hk_pwr_button",11,114,53,"top",[0,0,180],["case",false,false,true],0,0,0,0,0,0,0,                                 // hk pwr button model
+             "sub","hk_pwr_button",11,114,53,"top",[0,0,0],["case",false,false,true],0,0,0,0,0,0,0,                                     // hk pwr button opening
+             "model","dsub",12,-1,48,"top",[0,90,0],["case",false,false,false],0,0,0,0,0,0,[9,"male",4],                                // db9 model
+             "sub","dsub",12,-1,48,"top",[0,90,0],["case",false,false,false],0,0,0,0,0,0,[9,"male",4],                                  // db9 model
+             "add1","access_port",19,20,-0.01,"bottom",[0,0,0],["sbc",true,true,true], 81,100,2,0,0,"portrait",0,                       // access port
+             "model","access_cover",19,20,-0.01,"bottom",[0,0,0],["sbc",true,true,false],81,100,2,0,0,"portrait",0,                     // access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],81,100,2,0,0,"portrait",0],                 // access port cover
+
             ["h3_shell_drivebox2.5v",
             "sub","vent",-3.5,30,58,"top",[0,0,90],["case",false,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
             "sub","vent",111.5,30,58,"top",[0,0,90],["case",true,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
@@ -865,7 +1026,7 @@ accessory_data = [
             "sub","vent",111.5,30,28,"top",[0,0,90],["case",true,false,false],2,12,4,1,17,"vertical",1,                                // vent opening
             "sub","vent",-3.5,30,4,"bottom",[0,0,90],["case",false,false,false],2,6,4,1,17,"vertical",1,                               // vent opening
             "sub","vent",111.5,30,4,"bottom",[0,0,90],["case",true,false,false],2,6,4,1,17,"vertical",1,                               // vent opening
-             "sub","fan",99,10,48,"top",[0,0,90],["sbc-case_z",true,true,true],90,0,6,2,0,"",0,                                             // fan opening
+             "sub","fan",99,10,48,"top",[0,0,90],["sbc-case_z",true,true,true],90,0,6,2,0,"",0,                                         // fan opening
             "add1","access_port",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0,                      // access port
             "add2","button",12.34,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,53,0,0,"recess",0,                        // button
             "add2","button",23.77,106.43,53,"top",[0,0,0],["sbc-case_z",true,true,true],10,0,53,0,0,"recess",0,                        // button
@@ -874,15 +1035,15 @@ accessory_data = [
             "model","access_cover",10,30,-0.01,"bottom",[0,0,0],["sbc",true,true,false],100,80,2,0,0,"landscape",0,                    // access port cover
             "platter","button_top",-20,0,0,"top",[0,0,0],["case",false,false,false],10,0,58,0,0,"recess",0,                            // button top
             "platter","button_top",-30,0,0,"top",[0,0,0],["case",false,false,false],10,0,58,0,0,"recess",0,                            // button top
-             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0,                // access port cover
-             "sub","round",111,24,6.07,"bottom",[0,90,0],["case",true,true,false],3,0,3,0,0,"",0,                                      // sub hd side screw hole
-             "sub","round",111,100.6,6.07,"bottom",[0,90,0],["case",true,true,false],3,0,3,0,0,"",0,                                   // sub hd side screw hole
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],100,80,2,0,0,"landscape",0,                 // access port cover
+             "sub","round",111,24,6.07,"bottom",[0,90,0],["case",true,true,false],3,0,3,0,0,"",0,                                       // sub hd side screw hole
+             "sub","round",111,100.6,6.07,"bottom",[0,90,0],["case",true,true,false],3,0,3,0,0,"",0,                                    // sub hd side screw hole
             "add2","hd_vertleft",100,10,1.99,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0,                       // add hd holder
-             "add2","hd_vertright",65,10,1.99,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,0,"portrait",0,                    // sub hd bottom holes
+             "add2","hd_vertright",65,10,1.99,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,0,"portrait",0,                       // sub hd bottom holes
             "sub","hd_vertleft_holes",100,10,-.01,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,3,"portrait",0,                  // sub hd bottom holes
-             "sub","hd_vertright_holes",65,10,-.01,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,2,"portrait",0,               // sub hd bottom holes
-             "model","hd25",65,110,71.85,"bottom",[-90,0,-90],["case",true,true,false],0,0,0,15,0,"",0,                                // model 2.5 hd
-             "model","hd25",100,110,2,"bottom",[90,0,-90],["case",true,true,false],0,0,0,15,0,"",0],                                      // model 2.5 hd
+             "sub","hd_vertright_holes",65,10,-.01,"bottom",[0,0,0],["case",true,true,false],0,0,0,2.5,2,"portrait",0,                  // sub hd bottom holes
+             "model","hd25",65,110,71.85,"bottom",[-90,0,-90],["case",true,true,false],0,0,0,15,0,"",0,                                 // model 2.5 hd
+             "model","hd25",100,110,2,"bottom",[90,0,-90],["case",true,true,false],0,0,0,15,0,"",0],                                    // model 2.5 hd

             
             // Nvidia
@@ -984,6 +1145,10 @@ accessory_data = [
             ["quartz64b_stacked_poe_hat",
             "sub","fan",20,0,24.5,"top",[0,0,0],["case",true,true,true],40,0,6,2,0,"",0],                                              // sub fan opening

+             ["star64_shell",
+             "sub","fan",43,28,36,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0,                                          // sub fan opening
+             "sub","rectangle",43,0,36,"top",[0,0,0],["sbc-case_z",true,true,true],40,10,6,0,0,"",[1,1,1,1]],                           // sub pcie opening
+
             ["show2_shell",
             "model","hk_wb2",6.25,24.675,16,"top",[0,0,180],["sbc",true,true,true],0,0,0,0,0,"",0,                                     // hk weatherboard2
             "suball","round",48.75,0,6,"top",[90,0,0],["sbc",true,true,true],4,0,4,0,0,"",0,                                           // sub button access hole
@@ -1175,107 +1340,239 @@ accessory_data = [
             ["rpi4b_fitted",
             "sub","fan",10,10,25.5,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                       // sub fan opening
             
+             ["rpi5_noheatsink_shell",
+             "sub","fan",10,10,24.5,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                       // sub fan opening
+
+             ["rpi5_noheatsink_panel",
+             "sub","fan",10,10,24.5,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                       // sub fan opening
+
+             ["rpi5_noheatsink_stacked",
+             "sub","fan",10,10,24.5,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                       // sub fan opening
+
+             ["rpi5_noheatsink_tray",
+             "sub","fan",10,10,24.5,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                       // sub fan opening
+
+             ["rpi5_noheatsink_tray_sides",
+             "sub","fan",10,10,25.5,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                       // sub fan opening
+
+             ["rpi5_noheatsink_round",
+             "suball","rectangle",4.5,-26,5.5,"top",[0,0,0],["case",false,false,false],11,20,8,0,0,"vertical",[1,1,1,1],                // sub hdmi opening
+             "suball","rectangle",21.5,-26,4,"top",[0,0,0],["case",false,false,false],21,10,15.5,0,0,"vertical",[1,1,1,1],              // sub hdmi opening
+             "sub","fan",10,10,24.5,"top",[0,0,0],["case",true,true,true],40,0,6,2,0,"",0],                                             // sub fan opening
+
+             ["rpi5_noheatsink_hex",
+             "suball","rectangle",4.5,-20,5.5,"top",[0,0,0],["case",false,false,false],11,20,8,0,0,"vertical",[1,1,1,1],                // sub hdmi opening
+             "suball","rectangle",21.5,-26,4,"top",[0,0,0],["case",false,false,false],21,20,15.5,0,0,"vertical",[1,1,1,1],              // sub hdmi opening
+             "sub","fan",10,10,24.5,"top",[0,0,0],["case",true,true,true],40,0,6,2,0,"",0],                                             // sub fan opening
+
+             ["rpi5_noheatsink_snap",
+             "sub","fan",10,10,24.5,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                       // sub fan opening
+
+             ["rpi5_noheatsink_fitted",
+             "sub","fan",10,10,25.5,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                       // sub fan opening
+             
             // Radxa
-             ["rockpi4b+_shell",
+             ["rock4b+_shell",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4b+_panel",
+             ["rock4b+_panel",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4b+_stacked",
+             ["rock4b+_stacked",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4b+_tray",
+             ["rock4b+_tray",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4b+_tray_sides",
+             ["rock4b+_tray_sides",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4b+_round",
+             ["rock4b+_round",
             "suball","rectangle",4.5,-26,14.5,"top",[0,0,0],["sbc",true,true,true],11,20,8,0,0,"vertical",[1,1,1,1],                   // sub hdmi opening
             "suball","rectangle",21.5,-26,13,"top",[0,0,0],["sbc",true,true,true],21,10,15.5,0,0,"vertical",[1,1,1,1],                 // sub hdmi opening
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4b+_hex",
+             ["rock4b+_hex",
             "suball","rectangle",4.5,-20,14.5,"top",[0,0,0],["sbc",true,true,true],11,20,8,0,0,"vertical",[1,1,1,1],                   // sub hdmi opening
             "suball","rectangle",21.5,-26,13,"top",[0,0,0],["sbc",true,true,true],21,20,15.5,0,0,"vertical",[1,1,1,1],                 // sub hdmi opening
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4b+_snap",
+             ["rock4b+_snap",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4b+_fitted",
+             ["rock4b+_fitted",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening
             
-             ["rockpi4c_shell",
+             ["rock4c_shell",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c_panel",
+             ["rock4c_panel",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c_stacked",
+             ["rock4c_stacked",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening
 
-             ["rockpi4c_tray",
+             ["rock4c_tray",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c_tray_sides",
+             ["rock4c_tray_sides",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c_round",
+             ["rock4c_round",
             "suball","rectangle",4.5,-26,14.5,"top",[0,0,0],["sbc",true,true,true],11,20,8,0,0,"vertical",[1,1,1,1],                   // sub hdmi opening
             "suball","rectangle",21.5,-26,13,"top",[0,0,0],["sbc",true,true,true],21,10,15.5,0,0,"vertical",[1,1,1,1],                 // sub hdmi opening
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c_hex",
+             ["rock4c_hex",
             "suball","rectangle",4.5,-20,14.5,"top",[0,0,0],["sbc",true,true,true],11,20,8,0,0,"vertical",[1,1,1,1],                   // sub hdmi opening
             "suball","rectangle",21.5,-26,13,"top",[0,0,0],["sbc",true,true,true],21,20,15.5,0,0,"vertical",[1,1,1,1],                 // sub hdmi opening
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c_snap",
+             ["rock4c_snap",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c_fitted",
+             ["rock4c_fitted",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening
             
-             ["rockpi4c+_shell",
+             ["rock4c+_shell",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening
             
-             ["rockpi4c+_panel",
+             ["rock4c+_panel",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c+_stacked",
+             ["rock4c+_stacked",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c+_tray",
+             ["rock4c+_tray",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c+_tray_sides",
+             ["rock4c+_tray_sides",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c+_round",
+             ["rock4c+_round",
             "suball","rectangle",4.5,-26,14.5,"top",[0,0,0],["sbc",true,true,true],11,20,8,0,0,"vertical",[1,1,1,1],                   // sub hdmi opening
             "suball","rectangle",21.5,-26,13,"top",[0,0,0],["sbc",true,true,true],21,10,15.5,0,0,"vertical",[1,1,1,1],                 // sub hdmi opening
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c+_hex",
+             ["rock4c+_hex",
             "suball","rectangle",4.5,-20,14.5,"top",[0,0,0],["sbc",true,true,true],11,20,8,0,0,"vertical",[1,1,1,1],                   // sub hdmi opening
             "suball","rectangle",21.5,-26,13,"top",[0,0,0],["sbc",true,true,true],21,20,15.5,0,0,"vertical",[1,1,1,1],                 // sub hdmi opening
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c+_snap",
+             ["rock4c+_snap",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi4c+_fitted",
+             ["rock4c+_fitted",
             "sub","fan",10,10,0,"bottom",[0,0,0],["sbc",true,true,false],40,0,6,2,0,"",0],                                             // sub fan opening

-             ["rockpi5b",
+             ["rock5b",
+             "sub","rectangle",-1,66.5,12.99,"top",[0,0,0],["sbc",true,true,true],10,2,8,0,0,"",[.25,.25,.25,.25],                      // UL standoff adjustment
+             "sub","rectangle",92,17.5,12.99,"top",[0,0,0],["sbc",true,true,true],10,2,15,0,0,"",[.25,.25,.25,.25],                     // LR standoff adjustment
+             "sub","rectangle",93,17.5,12.99,"top",[0,0,0],["sbc",true,true,true],2,10,15,0,0,"",[.25,.25,.25,.25],                     // LR standoff adjustment
+             "sub","rectangle",78,67,-1,"bottom",[0,0,0],["sbc",true,true,false],14,18,12.5,0,0,"",[.25,.25,.25,.25],                   // sdcard opening
+             "sub","slot",15,0,21.25,"top",[90,90,0],["sbc",true,true,true],3.75,6.125,5,0,0,"",[.25,.25,.25,.25],                      // usb-c adjustment
+             "sub","rectangle",81.575,-5,13,"top",[0,0,0],["sbc",true,true,true],16.75,4,14.25,0,0,"",[.25,.25,.25,.25],                // rj-45 adjustment
+             "sub","rectangle",64.25,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                       // usb3 adjustment
+             "sub","rectangle",45.5,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                        // usb2 adjustment
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access cover
+             "platter","access_cover",-110,40,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access cover
+             
+             ["rock5b_shell",
+             "sub","rectangle",-1,66.5,12.99,"top",[0,0,0],["sbc",true,true,true],10,2,8,0,0,"",[.25,.25,.25,.25],                      // UL standoff adjustment
+             "sub","rectangle",92,17.5,12.99,"top",[0,0,0],["sbc",true,true,true],10,2,15,0,0,"",[.25,.25,.25,.25],                     // LR standoff adjustment
+             "sub","rectangle",93,17.5,12.99,"top",[0,0,0],["sbc",true,true,true],2,10,15,0,0,"",[.25,.25,.25,.25],                     // LR standoff adjustment
+             "sub","rectangle",78,67,-1,"bottom",[0,0,0],["sbc",true,true,false],14,18,12.5,0,0,"",[.25,.25,.25,.25],                   // sdcard opening
+             "add1","round",62.5,-1.5,14,"top",[0,0,0],["case",true,true,true],3,0,18,0,0,"",0,                                         // wall support
+             "add1","round",80.75,-1.5,14,"top",[0,0,0],["case",true,true,true],2,0,18,0,0,"",0,                                        // wall support
+             "sub","slot",15,0,21.25,"top",[90,90,0],["sbc",true,true,true],3.75,6.125,5,0,0,"",[.25,.25,.25,.25],                      // usb-c adjustment
+             "sub","rectangle",81.575,-5,13,"top",[0,0,0],["sbc",true,true,true],16.75,4,14.25,0,0,"",[.25,.25,.25,.25],                // rj-45 adjustment
+             "sub","rectangle",64.25,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                       // usb3 adjustment
+             "sub","rectangle",45.5,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                        // usb2 adjustment
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access cover
+             
+             ["rock5bq",
+             "sub","rectangle",-1,66.5,12.99,"top",[0,0,0],["sbc",true,true,true],10,2,8,0,0,"",[.25,.25,.25,.25],                      // UL standoff adjustment
+             "sub","rectangle",92,17.5,12.99,"top",[0,0,0],["sbc",true,true,true],10,2,15,0,0,"",[.25,.25,.25,.25],                     // LR standoff adjustment
+             "sub","rectangle",93,17.5,12.99,"top",[0,0,0],["sbc",true,true,true],2,10,15,0,0,"",[.25,.25,.25,.25],                     // LR standoff adjustment
+             "sub","rectangle",89,9.25,11,"top",[0,0,0],["case",true,true,false],10,10,15,0,0,"vertical",[1,1,1,1],                     // sub fitting
+             "sub","rectangle",14,23.5,28,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],       // heatsink opening
+             "sub","slot",15,0,21.25,"top",[90,90,0],["sbc",true,true,true],3.75,6.125,5,0,0,"",[.25,.25,.25,.25],                      // usb-c adjustment
+             "sub","rectangle",81.575,-5,13,"top",[0,0,0],["sbc",true,true,true],16.75,4,14.25,0,0,"",[.25,.25,.25,.25],                // rj-45 adjustment
+             "sub","rectangle",64.25,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                       // usb3 adjustment
+             "sub","rectangle",45.5,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                        // usb2 adjustment
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access cover
+             "platter","access_cover",-110,40,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access cover
+             
+             ["rock5bq_shell",
+             "sub","rectangle",-1,66.5,12.99,"top",[0,0,0],["sbc",true,true,true],10,2,8,0,0,"",[.25,.25,.25,.25],                      // UL standoff adjustment
+             "sub","rectangle",92,17.5,12.99,"top",[0,0,0],["sbc",true,true,true],10,2,15,0,0,"",[.25,.25,.25,.25],                     // LR standoff adjustment
+             "sub","rectangle",93,17.5,12.99,"top",[0,0,0],["sbc",true,true,true],2,10,15,0,0,"",[.25,.25,.25,.25],                     // LR standoff adjustment
+             "sub","rectangle",89,9.25,11,"top",[0,0,0],["case",true,true,false],10,10,15,0,0,"vertical",[1,1,1,1],                     // sub fitting
+             "sub","rectangle",14,23.5,28,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],       // heatsink opening
+             "add1","round",62.5,-1.5,14,"top",[0,0,0],["case",true,true,true],3,0,18,0,0,"",0,                                         // wall support
+             "add1","round",80.75,-1.5,14,"top",[0,0,0],["case",true,true,true],2,0,18,0,0,"",0,                                        // wall support
+             "sub","slot",15,0,21.25,"top",[90,90,0],["sbc",true,true,true],3.75,6.125,5,0,0,"",[.25,.25,.25,.25],                      // usb-c adjustment
+             "sub","rectangle",81.575,-5,13,"top",[0,0,0],["sbc",true,true,true],16.75,4,14.25,0,0,"",[.25,.25,.25,.25],                // rj-45 adjustment
+             "sub","rectangle",64.25,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                       // usb3 adjustment
+             "sub","rectangle",45.5,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                        // usb2 adjustment
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access cover
+             
+             ["rock5bq_tray",
+             "sub","rectangle",89,9.25,11,"top",[0,0,0],["case",true,true,false],10,10,15,0,0,"vertical",[1,1,1,1],                     // sub fitting
+             "sub","rectangle",14,23.5,28,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],       // heatsink opening
+             "sub","slot",15,0,21.25,"top",[90,90,0],["sbc",true,true,true],3.75,6.125,5,0,0,"",[.25,.25,.25,.25],                      // usb-c adjustment
+             "sub","rectangle",81.575,-5,13,"top",[0,0,0],["sbc",true,true,true],16.75,4,14.25,0,0,"",[.25,.25,.25,.25],                // rj-45 adjustment
+             "sub","rectangle",64.25,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                       // usb3 adjustment
+             "sub","rectangle",45.5,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                        // usb2 adjustment
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access cover
+
+             ["rock5bq_tray_sides",
+             "sub","rectangle",89,9.25,11,"top",[0,0,0],["case",true,true,false],10,10,15,0,0,"vertical",[1,1,1,1],                     // sub fitting
+             "sub","rectangle",14,23.5,30,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],       // heatsink opening
+             "sub","slot",15,0,21.25,"top",[90,90,0],["sbc",true,true,true],3.75,6.125,5,0,0,"",[.25,.25,.25,.25],                      // usb-c adjustment
+             "sub","rectangle",81.575,-5,13,"top",[0,0,0],["sbc",true,true,true],16.75,4,14.25,0,0,"",[.25,.25,.25,.25],                // rj-45 adjustment
+             "sub","rectangle",64.25,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                       // usb3 adjustment
+             "sub","rectangle",45.5,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                        // usb2 adjustment
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access cover
+             
+             ["rock5bq_snap",
+             "sub","rectangle",89,9.25,11,"top",[0,0,0],["case",true,true,false],10,10,15,0,0,"vertical",[1,1,1,1],                     // sub fitting
+             "sub","rectangle",14,23.5,32,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],       // heatsink opening
+             "sub","slot",15,0,21.25,"top",[90,90,0],["sbc",true,true,true],3.75,6.125,5,0,0,"",[.25,.25,.25,.25],                      // usb-c adjustment
+             "sub","rectangle",81.575,-5,13,"top",[0,0,0],["sbc",true,true,true],16.75,4,14.25,0,0,"",[.25,.25,.25,.25],                // rj-45 adjustment
+             "sub","rectangle",64.25,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                       // usb3 adjustment
+             "sub","rectangle",45.5,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                        // usb2 adjustment
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access cover
+             
+             ["rock5bq_fitted",
+             "sub","rectangle",89,9.25,11,"top",[0,0,0],["case",true,true,false],10,10,15,0,0,"vertical",[1,1,1,1],                     // sub fitting
+             "sub","rectangle",14,23.5,30,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],       // heatsink opening
+             "sub","slot",15,0,21.25,"top",[90,90,0],["sbc",true,true,true],3.75,6.125,5,0,0,"",[.25,.25,.25,.25],                      // usb-c adjustment
+             "sub","rectangle",81.575,-5,13,"top",[0,0,0],["sbc",true,true,true],16.75,4,14.25,0,0,"",[.25,.25,.25,.25],                // rj-45 adjustment
+             "sub","rectangle",64.25,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                       // usb3 adjustment
+             "sub","rectangle",45.5,-5,13,"top",[0,0,0],["sbc",true,true,true],15,4,17,0,0,"",[.25,.25,.25,.25],                        // usb2 adjustment
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access cover
+             
+             ["rock5b-v1.3",
             "sub","rectangle",-1,66.5,13,"top",[0,0,0],["sbc",true,true,false],10,2,8,0,0,"",[.25,.25,.25,.25],                        // UL standoff adjustment
             "sub","rectangle",92,17.5,13,"top",[0,0,0],["sbc",true,true,false],10,2,15,0,0,"",[.25,.25,.25,.25],                        // LR standoff adjustment
-             "sub","rectangle",77,67,-1,"bottom",[0,0,0],["sbc",true,true,false],15,18,12.5,0,0,"",[.25,.25,.25,.25],                   // sdcard opening
             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access port cover
-             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access cover

             
             // Khadas
@@ -1583,12 +1880,109 @@ accessory_data = [

             ["tinkerboard-r2_fitted",
             "sub","fan",10,10,25.5,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                       // sub fan opening
+
+             ["opi5_shell",
+             "sub","fan",35,13,18,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                          // sub fan opening
+
+             ["opi5_panel",
+             "sub","fan",35,13,18,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                          // sub fan opening
+
+             ["opi5_stacked",
+             "sub","fan",35,13,18,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                          // sub fan opening
+
+             ["opi5_tray",
+             "sub","fan",35,13,18,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                          // sub fan opening
+
+             ["opi5_tray-sides",
+             "sub","fan",35,13,19,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                          // sub fan opening
+
+             ["opi5_snap",
+             "sub","fan",35,13,21,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                          // sub fan opening
+
+             ["opi5_fitted",
+             "sub","fan",35,13,19,"top",[0,0,0],["sbc-case_z",true,true,true],40,0,6,2,0,"",0],                                          // sub fan opening
+
+             ["visonfive2_shell",
+             "sub","rectangle",89,9.25,11,"top",[0,0,0],["case",true,true,false],10,10,15,0,0,"vertical",[1,1,1,1],                     // sub fitting
+             "add1","round",11.25,-.5,10,"top",[0,0,0],["case",true,true,true],2,0,17,0,0,"",0,                                         // wall support
+             "add1","round",29.75,-.5,10,"top",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                         // wall support
+             "add1","round",50,-.5,10,"top",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                            // wall support
+             "add1","round",60.875,-.5,10,"top",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                        // wall support
+             "add1","round",81.125,-.5,10,"top",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                        // wall support
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access port cover
             
-             // hk uart group
-             ["hk_uart",
-             "add2","uart_holder",-25,0,1.9,"bottom",[0,0,0],["sbc",true,false,false],10,10,0,0,0,"",0,                                 // add uart holder
-             "model","hk_uart",-22.5,23,5,"bottom",[0,0,-90],["sbc",true,false,false],10,10,0,0,0,"",0,                                 // add uart model
-             "model","uart_strap",-25,0,2,"bottom",[0,0,0],["sbc",true,false,false],0,0,0,0,0,"",0, 
-             "platter","uart_strap",-35,75,-9,"bottom",[0,0,0],["case",false,false,false],0,0,0,0,0,"",0]                               // hk uart strap
+             ["visonfive2_panel",
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access port cover
+             
+             ["visonfive2_stacked",
+             "sub","rectangle",89,9.25,11,"top",[0,0,0],["case",true,true,false],10,10,15,0,0,"vertical",[1,1,1,1]],                    // sub fitting
+             
+             ["visonfive2_tray",
+             "add1","round",11.25,-.5,9,"bottom",[0,0,0],["case",true,true,true],2,0,17,0,0,"",0,                                       // wall support
+             "add1","round",29.75,-.5,9,"bottom",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                       // wall support
+             "add1","round",50,-.5,9,"bottom",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                          // wall support
+             "add1","round",60.875,-.5,9,"bottom",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                      // wall support
+             "add1","round",81.125,-.5,9,"bottom",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                      // wall support
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access port cover
+             
+             ["visonfive2_snap",
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access port cover
+              
+             ["visonfive2_fitted",
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access port cover
+             ["visonfive2q_shell",
+             "sub","rectangle",89,9.25,11,"top",[0,0,0],["case",true,true,false],10,10,15,0,0,"vertical",[1,1,1,1],                     // sub fitting
+             "add1","round",11.25,-.5,10,"top",[0,0,0],["case",true,true,true],2,0,17,0,0,"",0,                                         // wall support
+             "add1","round",29.75,-.5,10,"top",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                         // wall support
+             "add1","round",50,-.5,10,"top",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                            // wall support
+             "add1","round",60.875,-.5,10,"top",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                        // wall support
+             "add1","round",81.125,-.5,10,"top",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                        // wall support
+             "sub","rectangle",27,20,25,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],         // sub rectangle
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access port cover
+             
+             ["visonfive2q_panel",
+             "sub","rectangle",27,20,25,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],         // sub rectangle
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access port cover
+             
+             ["visonfive2q_stacked",
+             "sub","rectangle",27,20,25,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],         // sub rectangle
+             "sub","rectangle",89,9.25,11,"top",[0,0,0],["case",true,true,false],10,10,15,0,0,"vertical",[1,1,1,1]],                    // sub fitting
+             
+             ["visonfive2q_tray",
+             "sub","rectangle",27,20,25,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],         // sub rectangle
+             "add1","round",11.25,-.5,9,"bottom",[0,0,0],["case",true,true,true],2,0,17,0,0,"",0,                                       // wall support
+             "add1","round",29.75,-.5,9,"bottom",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                       // wall support
+             "add1","round",50,-.5,9,"bottom",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                          // wall support
+             "add1","round",60.875,-.5,9,"bottom",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                      // wall support
+             "add1","round",81.125,-.5,9,"bottom",[0,0,0],["case",true,true,true],3,0,17,0,0,"",0,                                      // wall support
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access port cover
+             
+             ["visonfive2q_snap",
+             "sub","rectangle",27,20,25,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],         // sub rectangle
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0],                  // platter access port cover
+              
+             ["visonfive2q_fitted",
+             "sub","rectangle",27,20,25,"top",[0,0,0],["sbc-case_z",true,true,true],43,43,6,0,0,"horizontal",[.25,.25,.25,.25],         // sub rectangle
+             "add1","access_port",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                         // access port
+             "model","access_cover",10,0,-0.01,"bottom",[0,0,0],["sbc",true,true,false],80,75,2,0,0,"portrait",0,                       // model access port cover
+             "platter","access_cover",-110,30,0,"bottom",[0,0,0],["case",false,false,false],80,75,2,0,0,"portrait",0]                   // platter access port cover
             ];
             
--- a/sbc_case_builder_library.scad
+++ b/sbc_case_builder_library.scad
--- a/stl/db9_f.stl
+++ b/stl/db9_f.stl
--- a/stl/db9_m.stl
+++ b/stl/db9_m.stl
--- a/stl/h3_port_extender.stl
+++ b/stl/h3_port_extender.stl
--- a/stl/header_2x2_90.stl
+++ b/stl/header_2x2_90.stl
--- a/stl/header_encl_2x5_90.stl
+++ b/stl/header_encl_2x5_90.stl
Author	SHA1	Message	Date
Edward Kisiel	390df175b3	added 5mm and 8mm hex vent, adjusted m1s cases, updated sbc model framework, fixed snap top protrusion placement and other fixes.	2023-12-11 16:21:34 -05:00
Edward Kisiel	0c96b1247a	adjusted m1s shell, added m1s_shell_ups case, adjusted components and cooling options.	2023-12-07 20:46:38 -05:00
Edward Kisiel	7cec418b69	added odroid-m1s, added hex vent cooling option and made other changes.	2023-11-15 21:09:42 -05:00
Edward Kisiel	59b894d738	updated sbc model framework and header info.	2023-11-10 12:18:07 -05:00
Edward Kisiel	2e7cd76f20	adjusted indent and cooling options for all rpi5 cases	2023-11-04 17:02:38 -04:00
Edward Kisiel	7eab4fe790	added rpi5 cases	2023-11-04 15:52:38 -04:00
Edward Kisiel	501da93cad	fixed snap case top, removed support pieces from non-shell cases for rock5b, fixed tray bottom mounting hole location for top and interference with standoff.	2023-08-26 14:39:08 -04:00
Edward Kisiel	c83301debf	opir1 added, updated sbc_model_framework and sbc_case_builder and readme.md	2023-05-30 20:58:56 -04:00
Edward Kisiel	c2d7cc3352	added rock5bq cases panel, stacked, tray, tray-sides, snap and fitted, updated sbc_model_framework	2023-05-14 17:21:51 -04:00
Edward Kisiel	20ab01b924	adjustments to rock5b-v1.42 and added rock5bq-v1.42 with updated sbc model framework, adjusted all rock5b case openings in sbc_case_builder_accessories.cfg, rock5b is now green-verified	2023-05-14 15:09:00 -04:00
Edward Kisiel	0770c17468	updated sbc model framework for visionfive2q, added visionfive2q cases, adjusted tray design side screw locations due to interference	2023-03-09 17:56:35 -05:00
Edward Kisiel	3a1ba0f811	h3_ultimate2 support added at corners	2023-03-09 12:01:28 -05:00
Edward Kisiel	572293170d	reverted bottom height calc and added support ribs for h3_ultimate2 case	2023-03-06 13:26:29 -05:00
Edward Kisiel	b59f99c0b6	updated sbc model framework for h2 and h3 pcb thickness increase, changed bottom_height calc to include pcb thickness.	2023-03-05 14:57:42 -05:00
Edward Kisiel	a6795b3383	updated sbc model framework for usbc_vertical changes	2023-03-04 18:11:28 -05:00
Edward Kisiel	00648a52e9	updated sbc model framework, renamed radax rockpi to rock, rock 5b io adjustments, visionfive2 io overhang adjusted, readme.md and file comments updated.	2023-03-04 17:16:01 -05:00
Edward Kisiel	f24d3e918b	implemented header_26 as a gpio, added opi5 remaining base design.	2023-02-22 19:23:42 -05:00
Edward Kisiel	b4189a6cee	added opi5 sbc and updated sbc_model_framework and documentation.	2023-02-22 10:21:20 -05:00
Edward Kisiel	6aa68c568e	updated sbc_model_framework	2023-02-21 12:58:08 -05:00
Edward Kisiel	efed91db76	Merge pull request #29 from amazingfate/rock5b-v1.3 add mask fix for rock5b v1.3	2023-02-21 17:55:14 +00:00
amazingfate	30d709a00e	add mask fix for rock5b v1.3	2023-02-21 14:53:25 +08:00
Edward Kisiel	bb5fb69cab	added visionfive2 cases, split rockpi5b into rockpi5b-v1.3 and rockpi5b-v1.42 with addtions and modifications to support pre-release and released versions.	2023-02-20 13:09:38 -05:00
Edward Kisiel	f7d06bb311	added cableholder_spacer	2023-02-11 19:32:42 -05:00
Edward Kisiel	2aad1fef87	made h3_port_extender_holder parametric and updated associated cases.	2023-02-09 22:56:59 -05:00
Edward Kisiel	adf4101e3c	Merge pull request #27 from Icenowy/star64 Refinements to Star64	2023-01-31 22:58:38 +00:00
Icenowy Zheng	fa1d426130	add star64-shell accessory (fan+pcie holes) and preset Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2023-01-31 21:12:04 +08:00
Icenowy Zheng	3af7520d67	add stacked dual rj45 Used on star64. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2023-01-31 21:11:35 +08:00
Edward Kisiel	d5f718ca59	updated to latest sbc_model_framework	2023-01-29 10:16:45 -05:00
Edward Kisiel	236be28bdd	added h3_port_extender_holder and updated h3_ultimate2 case.	2023-01-24 22:39:50 -05:00
Edward Kisiel	6ef186018f	added wall support for h3_ultimate2	2023-01-22 15:37:25 -05:00
Edward Kisiel	bf7377efbb	fixed access_port and access_cover 180 rotation in portrait and landscape.	2023-01-21 20:38:03 -05:00
Edward Kisiel	addb512b7f	fixed 60mm fan mask crossarms	2023-01-21 17:17:41 -05:00
Edward Kisiel	6cb1ad2e5d	added nut_holder module and amended h3_ultimate2 case.	2023-01-18 17:19:43 -05:00
Edward Kisiel	eb01bb2829	work on h3_ultimate case	2023-01-15 17:44:58 -05:00
Edward Kisiel	8b11dea464	fixed other standoff opening issue and set color in vent_panel_hex.	2023-01-15 16:46:07 -05:00
Edward Kisiel	489e953d09	Merge pull request #25 from tomek-szczesny/main h3_ultimate2 development	2023-01-15 21:27:21 +00:00
Edward Kisiel	dca4858007	fixed standoff auto openings for z height, fixed standoff sidewall supports distance on top face	2023-01-15 16:12:17 -05:00
Tomek Szczęsny	4b24af0f4b	h3_ultimate2 development	2023-01-15 20:41:12 +01:00
Edward Kisiel	33e9c04da1	Merge pull request #22 from Icenowy/licheerv Add LicheeRV + Dock support	2023-01-15 17:39:28 +00:00
Icenowy Zheng	c0da9dc727	add bigger usbc hole for LicheeRV + Dock Type-C This Type-C port is on SoM and behind the edge of the Dock. Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2023-01-16 01:17:44 +08:00
Icenowy Zheng	36e6538090	add licheerv+dock to model selection Signed-off-by: Icenowy Zheng <uwu@icenowy.me>	2023-01-16 01:17:44 +08:00
Edward Kisiel	8d1d9bdaf0	updated submodule sbc model framework and n2l_gpio case gpio opening.	2023-01-15 12:06:52 -05:00
Edward Kisiel	17e4e9dd97	Merge pull request #23 from tomek-szczesny/main h3_ultimate2 development	2023-01-15 16:53:04 +00:00
Tomek Szczęsny	44a0697e2b	Changes to h3_ultimate2	2023-01-15 16:31:59 +01:00
Tomek Szczęsny	a068940140	Added mounting holes to vent_panel_hex()	2023-01-15 16:30:48 +01:00
Tomek Szczęsny	e109837ae7	added vent_panel_hex(), minor fix in vent_hex()	2023-01-15 15:08:15 +01:00
Edward Kisiel	51f453be04	added db9 model and mask, n2l sidewall support changed, work on n2l_gpio and h3_ultimate2 cases, updated readme.md.	2023-01-08 19:34:48 -05:00
Edward Kisiel	c23033d819	Merge pull request #21 from tomek-szczesny/main h3_ultimate2 development	2023-01-06 15:58:03 +00:00
Tomek Szczęsny	c29341d1d6	h3_ultimate2 changes and adjustments	2023-01-06 16:36:16 +01:00
Tomek Szczęsny	61446a322f	Adjusted Port Extender hole positions	2023-01-06 16:14:12 +01:00
Edward Kisiel	949af488aa	added xu4_keyhole case	2023-01-05 19:34:38 -05:00
Edward Kisiel	d565be1614	Merge pull request #20 from tomek-szczesny/main Added vent_hex(), updated h3_ultimate2	2023-01-05 15:53:06 +00:00
Tomek Szczęsny	000724340b	Added vent_hex() sub, updated h3_ultimate2	2023-01-05 16:25:04 +01:00
Edward Kisiel	79985241c0	fixed standoff sidewall support placement, added fan masks for 60mm and code cleanup, finished h3_port_extender, created h3_ultimate2 for remote mount of port_extender.	2023-01-03 22:39:45 -05:00
Edward Kisiel	d070e829f0	added hk_pwr_button model, keyhole accessory and h3_port_extender models for header and remote mount, updated h3_ultimate case.	2023-01-01 23:23:26 -05:00
Edward Kisiel	e9b5d5508e	changed parametrics for n2l_gpio case	2022-12-31 19:49:54 -05:00
Edward Kisiel	c330f3fcad	added n2l_gpio case	2022-12-31 19:37:16 -05:00
Edward Kisiel	610a432a86	added accessory entry n2l_gpio	2022-12-29 21:47:15 -05:00
Edward Kisiel	7806e8d578	more port extender integration	2022-12-25 20:46:36 -05:00
Edward Kisiel	6c46501c69	initial h3 port extender work	2022-12-23 16:25:03 -05:00