serial: modify config name and select some config [1/1]

PD#SWPL-64397

Problem:
1. modify config name and select some config

Solution:
1. modify config name and select some config

Verify:
s4d

Change-Id: I165ece6c465bb5077df8daf11b82e1ea55aaf989
Signed-off-by: wanwei.jiang <wanwei.jiang@amlogic.com>

arch/arm64/configs/amlogic_gki.fragment

@@ -4,8 +4,8 @@ CONFIG_AMLOGIC_DRIVER=y
 CONFIG_AMLOGIC_MODIFY=y
 CONFIG_DEVTMPFS=y
 
-# meson_uart.ko
-CONFIG_AMLOGIC_UART=y
+# meson_uart built into kernel
+CONFIG_AMLOGIC_SERIAL_MESON=y
 CONFIG_AMLOGIC_SERIAL_MESON_CONSOLE=y
 
 # amlogic-clk.ko

drivers/tty/serial/Kconfig

@@ -1,24 +1,24 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 #
 # Amlogic driver configuration
 #
 
-config AMLOGIC_UART
-	tristate "Serial support"
-	depends on SERIAL_CORE
+config AMLOGIC_SERIAL_MESON
+	tristate "Meson serial port support"
+	select SERIAL_CORE
 	default n
 	help
-	  Add support for the Amlogic serial port.
-	  this config only ctrl in makefile
-	  this config do not in meson_uart.c
-	  this config add
+	  This enables the driver for the on-chip UARTs of the Amlogic
+	  MesonX processors.
 
 config AMLOGIC_SERIAL_MESON_CONSOLE
 	bool "Console on Amlogic Serial port"
-	depends on AMLOGIC_UART
-	depends on SERIAL_CORE_CONSOLE
-	depends on SERIAL_EARLYCON
-	default y
+	depends on AMLOGIC_SERIAL_MESON
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+	default n
 	help
-	  Support for running a console on the Amlogic serial
-	  this config is only
-	  used in meson_uart.c
+	  Say Y here if you wish to use a Amlogic MesonX UART as the
+	  system console (the system console is the device which
+	  receives all kernel messages and warnings and which allows
+	  logins in single user mode) as /dev/ttyAMLx.

drivers/tty/serial/Makefile

@@ -1 +1,3 @@
-obj-$(CONFIG_AMLOGIC_UART) += meson_uart.o
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+obj-$(CONFIG_AMLOGIC_SERIAL_MESON) += meson_uart.o