PD#SWPL-145570
Problem:
code refactoring to determine allocating
buffer's size between Gralloc and Codec2
Solution:
set parameters to node for gralloc
Verify:
txhd2
Change-Id: I5812b4bf23b2697ebaf33674b7cb2dcc88025eba
Signed-off-by: xinli.gao <xinli.gao@amlogic.com>
PD#SWPL-147512
Problem:
LDIM requires a strict timing sequence to match with the vsync signal
Solution:
SPICC supports vsync/line-n triggering control, Add a interface to
start/stop the vsync triggering transfer for LDIM
Porting from 5.4 1f62b7d1
Verify:
t3 t982
Change-Id: Ida2f63cbe318dceebbe97514e41a588e4ea143d4
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
PD#SWPL-147830
Problem:
sometime there are invalid config cause panel display abnormal
Solution:
add lcd config check function
1.lcd timing & tcon setting valid condition is decided by driver itself
2.display path timing_req_min is configured in dts, with alert_level
3.auto check after load lcd config, driver will be blocked by fatal err
4.manual cmd: echo check >/sys/class/lcd/debug
Verify:
am301
Change-Id: Iddd21f31f654ef99ae51465788c11a8d4a4e7446
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-147883
Problem:
IV slot does not need cleaning.
Solution:
IV slot is not clean.
Verify:
S1A
Change-Id: Id5f9bf3b95573cacb53de2e85796b10ce96ea7be
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
PD#SWPL-130883
Problem:
need to support inline partition encryption
Solution:
add support inline partition encryption in
spi nand driver
Verify:
s1a
Change-Id: Iadb9b9ae121939ef37a3abbd603a5eec17500739
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
PD#SWPL-125462
Problem:
open the HDMI2.0 ,the color of image is changed
Solution:
add vf info for colorimetry
Verify:
t5m kernel5.15
Change-Id: I126786f130d59fe2977ad8ea46b921aadd302d67
Signed-off-by: mingxiu.sun <mingxiu.sun@amlogic.com>
PD#SWPL-142875
Problem:
deadlock will happen in mark bad block process.
Solution:
add rsv-ops interface in rsv-manage to avoid deadlock.
Verify:
c3
Change-Id: I3841a8d3ca8c8f48142828b03ba9aefdf21adc62
Signed-off-by: Feng Chen <feng.chen@amlogic.com>
PD#SWPL-141054
Problem:
hdmi in top1+top2 idk case fail
Solution:
1.add top1 rdmif config for hdmi
2.modify chroma fmt to p444 for hdmi
because vdin dw is 444-10
3.support variable_fps
4.update hist read id only when vf content changed, to match
hist delay with cmodel
Verify:
t3x
Change-Id: Ib5a9bbb266d2105f4729afa12347ee8eb80fae3a
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-138653
Problem:
need modify for aipq of GPU.
Solution:
modify for aipq of GPU.
Verify:
T5M
Change-Id: I2703b3bba282eae827255793e9a94b659b37dc37
Signed-off-by: chen.xu <chen.xu@amlogic.com>
PD#SWPL-144572
Problem:
dewarp/ge2d interrupt resource usage between RTOS and Linux
Solution:
To avoid interfering with RTOS clock/power/interrupt resources,
turn on and keep power/clk first.
Poll the status of rtos,
then turn off power/clk and register interrupt.
Verify:
T7C
Change-Id: Ie2a3ae61df97c594324ffb3dde68d41250c946e3
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-145586
Problem:
When the vic of VSDB is stored first, the vic of video data block
is inserted at the end, and an error occurs in 420 capability map
Solution:
add SVD_VIC, used to store SVD in VDB, mapped with 420 CMDB
Verify:
S5/AX201-S928X
Test:
DRM-TX-44
Change-Id: I18b42e9c304b01b6712d9640f4bc08020595f305
Signed-off-by: ruofei.zhao <ruofei.zhao@amlogic.com>
PD#SWPL-145646
Problem:
Adds debugfs for codec status management.
Solution:
Add codec state module, mainly collect and
manage codec status information, and facilitate
the management of the configuration of each module.
Verify:
ohm
Change-Id: I8f877a954f9873c4aa4d632e007a67c0a41ff2b1
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
PD#SWPL-144627
Problem:
when kernel goes to early suspend, need keep the edid data
Solution:
Keep edid data during the suspend state. If there is HPD in
early suspend, there will update the EDID in the bottom of
hpd ISR
Verify:
ohm
Test:
DRM-TX-38
Change-Id: If1975a68da8c7431bb7867359bc5368b37dbc1f3
Signed-off-by: hang cheng <hang.cheng@amlogic.com>
PD#SWPL-144474
Problem:
For fcc,don't need keep di_multi memory
Solution:
Decoder transfer fcc flag to DI.
Verify:
ohm
Change-Id: I37d1da0dc5c99dd086ee1291d403525a009bc64b
Signed-off-by: lele xiang <lele.xiang@amlogic.com>
PD#SWPL-143936
Problem:
show or hide video does not work
Solution:
add mute plane interface
Verify:
AP222
Test:
DRM-OSD-111
Change-Id: Ib5898c9a0bc3201d397a3a33a9c073f0799c3aee
Signed-off-by: linfang.zhao <linfang.zhao@amlogic.com>
PD#SWPL-143972
Problem:
when clac_tmds_clk > max_tmds_clk, only check whether
the edid support frl, not check the box frl capability
Solution:
add check the box frl capability
Verify:
s905x4
Test:
DRM-TX-42
Change-Id: I502b130c7fc613d020566af35438465c52ee3b60
Signed-off-by: xiang.wu1 <xiang.wu1@amlogic.com>
PD#SWPL-141014
Problem:
txhd2 need to add media related thermal control
Solution:
1. add media cooling device. media module should call
media_cooling_register to register the cooling device.
and usually configure maxstate of the cooling device.
2. reconstruct cpucore cooling device.
Verify:
txhd2
Change-Id: I0576e0d91a3062b60f877a4e8577e4fe84e5f53b
Signed-off-by: Xingxing Wang <xingxing.wang@amlogic.com>
PD#SWPL-141768
Problem:
cleanup the bool return value in edid
Solution:
cleanup the bool return value in edid
Verify:
sc2/ah212
Test:
DRM-TX-17
Change-Id: I05ab9f8a5d20c457178349f7400f4ccb6e009d20
Signed-off-by: zongdong.jiao <zongdong.jiao@amlogic.com>
PD#SWPL-143291
Problem:
mute function will use in other module isr
Solution:
remove it,and set mute use fixed bit
Verify:
txhd2
Change-Id: I7f09f1ea1efb6269eef6422b7e5730ecdadc484e
Signed-off-by: hai.cao <hai.cao@amlogic.com>
PD#SWPL-138069
Problem:
dv 444 low-latency not convert to 422 will abnormal
Solution:
dv 444 low-latency need convert to 422
Verify:
t5w
Change-Id: Iff9d00a31d135334feb5bc5943f82426768f5e31
Signed-off-by: qiang.liu <qiang.liu@amlogic.com>
PD#SWPL-143058
Problem:
turn off memc when video mute
Solution:
turn off memc when video mute
Verify:
T3X
Change-Id: I8e631176e4cc3fc7542d6457770bef2bc61fde85
Signed-off-by: Cheng Wang <cheng.wang@amlogic.com>
PD#SWPL-139184
Problem:
HDR10 and HLG input and output format error for pip mode.
Solution:
adapter HDR10 and HLG input and output format for pip mode.
Verify:
S5
Change-Id: Ideb162c760bab1f294bf624243247033886f322b
Signed-off-by: chen.xu <chen.xu@amlogic.com>
xinli.gao