PD#SWPL-104759
Problem:
Bringup aml crypto on t5m
Solution:
Enable aml crypto dts on t5m
Verify:
T5M
Change-Id: I605aef6f6020924881ee2b5801beb8297611dd70
Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com>
PD#SWPL-104787
Problem:
T5M DMC0 access fail
Solution:
1.gpu driver alloc from DMC1 by ion
2.gralloc layer buffer alloc from heap-gfx
3.heap-gfx heap-fb and logo_addr move to dmc1
4.increase heap-gfx size to 256M for flatland
5.increase ion-dev size to 256M for RiptideGP2.apk
Verify:
T5M-AY301
Change-Id: I194601f45edd8b18bff5327a332d81e35a0f60a9
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
PD#SWPL-106227
Problem:
cfg file read fail due to GKI issue
Solution:
add firmware_request to read file
Verify:
t5m
Change-Id: I272b96990e40b8a0e6c7890118e685fd4533daa6
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-104397
Problem:
T5M/T5W osd3 not support afbc
Solution:
add mask to distinguish
Verify:
t5m
Test:
run on realchip
Change-Id: Ib669e224a07fe1012b0ddfc2133cbcda824a9a5e
Signed-off-by: congyang.huang <congyang.huang@amlogic.com>
PD#SWPL-106143
Problem:
frc config of default was error
Solution:
remove the default configuration of T3
Verify:
T5M
Change-Id: I35c064caea3c36dda250f406dad22fa0ede22753
Signed-off-by: Cheng Wang <cheng.wang@amlogic.com>
PD#SWPL-104778
Problem:
t5m need support tconless
Solution:
add tconless driver and parameter
Verify:
ay301
Change-Id: Iac2343a200a31aa6c2b34a586de333ae31f4759f
Signed-off-by: Jie Dai <jie.dai@amlogic.com>
PD#SWPL-104943
Problem:
need bringup wifi and bt for T5M
Solution:
add wifi and bt support
Verify:
T5M
Change-Id: I8ff30b2848d95727bf173f97bbf3380dad1ce46d
Signed-off-by: lei.chen <lei.chen@amlogic.com>
PD#SWPL-104737
Problem:
add t5m ddr priority
Solution:
use /sys/class/aml_ddr/priority set or show
Verify:
t5m
Change-Id: I2b237d8c3616b5b9e85a9a25381905ca4dd4d9bc
Signed-off-by: qinglin.li <qinglin.li@amlogic.com>
PD#SWPL-104737
Problem:
add single dmc info show
Solution:
add single dmc info show
Verify:
t5m
Change-Id: I0e2235ff9417173871ccf24273412cee909ae6e4
Signed-off-by: qinglin.li <qinglin.li@amlogic.com>
PD#SWPL-104766
Problem:
1. need to support regulator at t5m k5.15;
Solution:
1. add 301 regulator at dts;
2. add 309 regulator at dts;(sd card verity ok)
Verify:
AY301_T963D4-K8E(2GB) #056 for vddcpu pwm is ok
Change-Id: I11f26012ff9c6c9881a0c8bcfa58c085c78be431
Signed-off-by: chengbing.wu <chengbing.wu@amlogic.com>
PD#SWPL-104348
Problem:
t5m can not switch port
Solution:
add port switch settings
Verify:
t5m
Change-Id: I76ffb7550dc0e6e843f4ab06bb9007c55d9d01fb
Signed-off-by: yaoyu.xu <yaoyu.xu@amlogic.com>
PD#SWPL-105003
Problem:
1.vicp not support multi video playback for t5m.
2.judge vicp whether support t5m function err.
Solution:
modify vicp support function.
Verify:
T5m
Change-Id: I05eac9b81b9d41d095701d5f506efffc49499698
Signed-off-by: chen.xu <chen.xu@amlogic.com>
PD#SWPL-104742
Problem:
Test N and analog pins may have mux register conflict and cause
analog chip driver probe fail
Solution:
Move analog mux register down.
Verify:
t5m_ay301
Change-Id: Iaf62db2b5b54167ba9873e809932252d768f36b4
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
PD#SWPL-104740
Problem:
it will hang up when sys1 pll is setting the same rate
Solution:
add od for sys1 dco
Verify:
t5m skt
Change-Id: I0526dd9a129ea397a0391fcf7eefa8dbc4678524
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-105234
Problem:
need to enable CEC function of T5M
Solution:
bringup cec function for T5M
Verify:
AY301
Test:
test cec tx/rx function on AY301
Change-Id: Iee87edccb5b0377068342150bce780e7204d1bc4
Signed-off-by: hang cheng <hang.cheng@amlogic.com>
PD#SWPL-104397
Problem:
drm logo init fail
Solution:
change logo cma type
Verify:
ay301
Change-Id: I27a03186ee6c019191afadd78d706ebeed80e2ad
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
yuhua.lin