PD#SWPL-150034
Problem:
No mem debug.
Solution:
porting it from 5.15.
Verify:
local.
Change-Id: I74d8f6add93e162abdb8fe964bcd7fdea974825d
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-150034
Problem:
enable pagetrace for amlogic-6.6.
Solution:
update the function interface according to 6.6.
Verify:
local.
Change-Id: I48fef620a1da21a40f38da4abe59b44d211ce015
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-150034
Problem:
enable pagetrace for amlogic-6.6.
Solution:
update the function interface according to 6.6.
Verify:
local.
Change-Id: Ic257caa3b507dcadb999de3dbc94c0aef22b4b0a
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-151469
Problem:
build error about dtbo
Solution:
not build dtbo temporarily for debug
Verify:
a4 a5
Test:
local
Change-Id: I53284bfa01a2b1353be6c7aa19fedab7bc6de1f2
Signed-off-by: Dezhen Wang <dezhen.wang@amlogic.com>
PD#SWPL-150131
Problem:
No need to compatible to 5.15, so make code clean.
Solution:
remove compatible code.
Verify:
A4 & A5
Change-Id: Id20b4ce8a675934fbe597951517b8e72f6512e1a
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
PD#SWPL-149491
Problem:
need to support emmc/sdio at a4/a5;
Solution:
add emmc/sdio at dts;
Verify:
A4,A5
Change-Id: I315fd86d6be1a692feb94d408320b2c70c0f3fdf
Signed-off-by: Long <long.yu@amlogic.com>
PD#SWPL-149398
Problem:
need to support regulator at a4/a6 k6.6;
Solution:
add regulator at dts;
verify voltage at board;
Verify:
A4:BA400-A113L2-DEV #064
A5:AV400 #003, #019?
Change-Id: I6af27c779d8a2c88d2bf78945f8b46509fac98eb
Signed-off-by: chengbing.wu <chengbing.wu@amlogic.com>
PD#SWPL-150858
Problem:
amlogic-snd-codec-dummy.ko
amlogic-snd-soc.ko
amlogic-snd-codec-a1.ko
amlogic-snd-codec-t9015.ko
amlogic-snd-codec-ad82584f.ko
amlogic-snd-codec-tlv320adc3101.ko
can not insmod normally
Solution:
close the CONFIG_SND_SOC for debug
Verify:
sc2 c2 a4 a5
Test:
local
Change-Id: I0cc3a045f0ec7acc4231ab6940263fbe0e43370e
Signed-off-by: Dezhen Wang <dezhen.wang@amlogic.com>
PD#SWPL-150782
Problem:
bring up kernel6.6
Solution:
fix some code problem
Verify:
sc2 c2 a4 a5
Test:
local
Change-Id: I6b9affa83e6d46f6b857f4b542991bc70de4bfb5
Signed-off-by: Dezhen Wang <dezhen.wang@amlogic.com>
PD#SWPL-149504
Problem:
support USB for a4/a5
Solution:
support USB for a4/a5
Verify:
A4
Change-Id: I0510166908b6d9094269cb72f632348ab13a03b8
Signed-off-by: he.he <he.he@amlogic.com>
PD#SWPL-149440
Problem:
The A4 A5 need power domain support in kernel6.6.
Solution:
add config.
Verify:
ba400 and av400.
Change-Id: I0ebfb0d08628ebcfd5ecb66fddcbe77eaf9e090d
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
PD#SWPL-146738
Problem:
pagetrace too late in suspend phase.
Solution:
set pagetrace y default no gki20.
Verify:
local.
Change-Id: I258abab43c336e3de2a4190dce365705d2860f34
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-144746
Problem:
flash screen after osd disappear when play some h264/mpeg2 stream
Solution:
manipulate specific postblend reg and mif reg in the same vsync
Verify:
t7c
Test:
DRM-OSD-133
Change-Id: I651d4df3e0d4e82eadafa848e3aba2088028ea40
Signed-off-by: mingyang.he <mingyang.he@amlogic.com>
PD#SWPL-145306
Problem:
when resolution switch to 640x480p60hz,
it will display no signal for 10s during boot up
Solution:
remove 640x480p60hz resolution
Verify:
S5/SC2
Test:
DRM-TX-66
Change-Id: I0c4373e9554c75bb1941dbab465b30e1d8f8d175
Signed-off-by: ruofei.zhao <ruofei.zhao@amlogic.com>
PD#SWPL-144323
Problem:
always hdr, when uboot enters the kernel, it will send the
sdr package first and then the hdr package, causing the TV
to flash black once or the color will darken.
Solution:
When the kernel starts up, vout takes priority over vpp.
the HDR/DV module will use vinfo information, it needs
to attach vinfo after the EDID is parsed and before the
HDR/DV module is enabled.
Verify:
ohm
Test:
DRM-TX-70
Change-Id: Ifb8e4700e33db96a2298d57d5413a8fceb232fc0
Signed-off-by: xiang.wu1 <xiang.wu1@amlogic.com>
PD#SWPL-146713
Problem:
data read from udisk on otg usb port is error
Solution:
set u2drd wr_outstanding as 0
Verify:
be311
Change-Id: I12a5e155f73526f31afd0f4ae48b9ee031fe2450
Signed-off-by: qi duan <qi.duan@amlogic.com>
PD#SWPL-138887
Problem:
kernel panic and pc is at set_alpha_scpxn+0x24/0xb4
Solution:
composer info addr is wrong
set an initial value for it
Verify:
g12a
Change-Id: I7d5806e41f1a7bf6a2c4520be6eb87b275a52964
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-143281
Problem:
Add dump vframe flow in aipq, aisr and so on.
Solution:
Add dump vframe flow in aipq, aisr and so on.
Verify:
T3
Change-Id: Ib3b0bf62ba09d5cae40ce86730c2838f932e57e6
Signed-off-by: zhenteng.tian <zhenteng.tian@amlogic.com>
Jianxiong Pan