PD#SWPL-227069
Problem:
video will balck when width scaler down to 1 pixel
Solution:
setting 1 pixel can display
Verify:
t7c
Change-Id: Idfb75c1c96d8d69070b80d3bee6113199e11ada7
Signed-off-by: hai.cao <hai.cao@amlogic.com>
PD#SWPL-189327
Problem:
need key flag info
Solution:
add key flag command
Verify:
s6
Change-Id: If77ae46dfba7c696c1e6093b977d694f7fb2cd97
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
(cherry picked from commit aee0ed53b6)
PD#SWPL-161936
Problem:
The 'kt_ret' bits in 'KT_REE_CFG' must not be checked
because the 'kt_ret' bits have an invalid value
without performing the keytable configuration.
Solution:
remove the routine checking kt_ret in aml_kt_get_status.
Verify:
SC2
Change-Id: Ifa3b82c3fa620e1cdc8da6c62da075305045acad
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
(cherry picked from commit dabf12f7b3)
PD#SWPL-149012
Problem:
KL driver should be able to check
if KL's fuse is okay without M2M or descrambler in REE.
Solution:
add etsi challenge-response function
Verify:
T5D
Change-Id: I8492896086ba3e6e4701ee4511794e803ed6d900
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
(cherry picked from commit d7d4979d9d)
PD#SWPL-148195
Problem:
In the case of IV, aml_kt_invalidate does not have a return value,
resulting in an error return value.
Solution:
In the case of IV, aml_kt_invalidate is not performed,
so the return value is always successful.
Verify:
S4D metacas
Change-Id: I4fe59ce4f1d94486dbf3a00e72f611db3bc7b4f4
Signed-off-by: Doosan Baek <doosan.baek@amlogic.com>
(cherry picked from commit 9aa414bc72)
PD#SWPL-196630
Problem:
Need to simulate SARADC pin as GPIO.
Solution:
Voltage units adjusted to millivolts.
Verify:
T6D/BR301
Change-Id: I43ff3fd0c97e5d6381e42aee7d02f6b7bf5d7ea5
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
PD#SWPL-167411
Problem:
Optimize code to reduce invalid calls to mbox.
Solution:
Only the old version of bl30 (arm core) needs to configure mbox.
Verify:
SC2/AH212
Change-Id: Ib8781930453fe8fadffd39b73c477750857dd86a
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
PD#SWPL-226593
Problem:
amvecm and dv need get osd status
Solution:
add get osd status callback
Verify:
s7/s7d/s6/t6d
Test:
DRM-OSD-84
Change-Id: If34418241f821bf34c7d999c33a31df28eb6d911
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#SWPL-222902
Problem:
dsp need to reset when dsp hang
Solution:
add reset function when dsp panic
Verify:
a5
Change-Id: I3203af2530026098d929c32558abafcf328a17d5
Signed-off-by: Liming Xue <liming.xue@amlogic.com>
PD#SWPL-217775
Problem:
Potentially overflowing expression around operator [ * ],
which is evaluated using 4 byte arithmetic, and then used
in a context that expects an expression of 8 bytes type.
Solution:
Change long to int.
Verify:
SC2/AH212
Change-Id: I7a1118d21a0e14379a66c4970f2f93ae2740e649
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
(cherry picked from commit 7598a49c8381144da11c07bf1ee3cbbb03ae943b)
PD#SWPL-225609
Problem:
sync memory related patches from 5.15.
Solution:
sync memory related patches from 5.15.
Verify:
local;
Change-Id: I010fa5dc436d486bc46b7d49f8e0b32057c05ac7
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-225609
Problem:
system crash when suspend in hibernate.
Solution:
setup vmap stack for hibernate.
Verify:
s7.
Change-Id: I971c9a3dec8092a49e9531367e99f53775785a3e
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-178337
Problem:
In commit I11c0a1588c9a8d7db3987ef7b6444d836fe35cb3,
the max burst of bulk ep of all uvc devices are set
to 0.
Solution:
Do this only for crg host.
Verify:
s905x5m.
Change-Id: I1f716d5b42e88ee5f6be1fc24473bc7dd89f0fe7
Signed-off-by: dian.shao <dian.shao@amlogic.com>
PD#SWPL-227405
Problem:
get dmx pts jump for secure AV
Solution:
get newest pts for secure AV
Verify:
verified at SC2
Change-Id: I107131724db01440ee17a666f90b5a33564fcf3b
Signed-off-by: chuangcheng.peng <chuangcheng.peng@amlogic.com>
PD#SWPL-225792
Problem:
get dvr ts slow
Solution:
adjust the dvr timer flush time to 3ms
Verify:
verified at T5M
Change-Id: Ied0f2fa1366afc0088858e63174fd379540cbf52
Signed-off-by: chuangcheng.peng <chuangcheng.peng@amlogic.com>
PD#SWPL-224597
Problem:
if scaler1 after osdblend, the scaler1 input in yuv domain is non-0 when
raw data alpha is 0, and then vpp_osd_sc_div_alpha is enabled, the osd
capture will get the green screen
Solution:
add new pipeline to support osd1 scaler move to local, the scaler1 will
work on rgb domain
Verify:
s7d
Test:
DRM-OSD-96
Change-Id: Ic383199f131a838ab9f27c8aed68df20447c21e1
Signed-off-by: wenlong.zhang <wenlong.zhang@amlogic.com>
PD#SWPL-225635
Problem:
1.The Audio HAL Format in the driver is missing several
display formats.
Solution:
1.The audio_hal_format is consistent with audio_hal.
All formats can be displayed normally through tinymix
contents.
Verify:
yocto
Change-Id: Idee4cdf477d557bee871dabc8ddd0d7dee18dfbd
Signed-off-by: hui.liu <hui.liu@amlogic.com>
(cherry picked from commit 5551284e6f09be07c3cd4bce5d46b114e1a28848)
PD#SWPL-179512
Problem:
Need to save power when there is no wakeup source.
Solution:
Disable power/clk when no wakeup source.
Verify:
S7D/BM201
Change-Id: I57d7df4079b734c52738777d2f2999743fc6bc3d
Signed-off-by: Huqiang Qin <huqiang.qin@amlogic.com>
(cherry picked from commit bae0c9bb857be17735e4b10aa46862e07423d0bd)
PD#SWPL-228405
Problem:
The variable has not been initialized.
Solution:
add init.
Verify:
coverity scan
Change-Id: I2b3c5d920fee8b6bb70ddb1f23c75e5a4128d9be
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
(cherry picked from commit 1130cbe2c74ef475a69129653fff15d73b0c7095)
PD#SWPL-227215
Problem:
need new interface to set di_reverse
Solution:
Add it
Verify:
Verified on txhd2
Change-Id: I99cb6d7a65d6ca920dcf34e1bfd6111ecc65b74b
Signed-off-by: brian.zhu <brian.zhu@amlogic.com>
PD#SWPL-226501
Problem:
afbc addr is null then DMC violation
Solution:
v4l2 hdmi camera do not afbc
Verify:
T7C
Change-Id: I05bcee9aa0d4d597e7da36ba18f34947c57c0644
Signed-off-by: zijie.hong <zijie.hong@amlogic.com>
PD#SWPL-227399
Problem:
check the deep color phase may make time out
Solution:
enable phy to dig before poll reg
keep the tmds clk and pixel clk
Verify:
t7c
Test:
DRM-TX-135
Change-Id: Id432ef89b13126a96e611382c2382891db82bb7c
Signed-off-by: ruofei.zhao <ruofei.zhao@amlogic.com>
PD#SWPL-224872
Problem:
need support frame change test for debug
Solution:
add frame change debug test support
Verify:
ay301
Change-Id: I1e0d9f1707a4aa9eba8ac28b3d4da7d012956cee
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-224440
Problem:
Dolby Cert sample rate support test fail.
After reset, register default samplerate config is not 48k
which damage the frequence response.
Solution:
Correct the AD82128 codec sample rate according to user config.
Verify:
X5M SBR
Change-Id: I5069855acb9b7784e9f734127399d455ffe035c7
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-200841
Problem:
PDID_T7_ISP and PDID_T7_MIPI_ISP There is a
parent-child relationship, but the kernel
driver does not indicate it.
Solution:
add Parent-child relationship.
Verify:
t7
Change-Id: I410d4719c57523de6472b8e03b51f251923a2908
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
(cherry picked from commit 779315837ac3cad331f140331f34fe2e9c5740b0)
PD#SWPL-226202
Problem:
support ir sleep pins for t7c/t3
Solution:
support ir sleep pins for t7c/t3
Verify:
t7c
Change-Id: Ibd23865d5451b5e9ad731e80f237fae608193048
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
PD#SWPL-226679
Problem:
1.DPSS do not support frame rates above 1080p60hz
when MIF is input
2.aa ds registers configured wrongly
Solution:
1.VDIN output dw under 1080p
2.configure the size registers of aa ds
Verify:
t6w
Change-Id: Ic21b0fa0d9d9c2150ec79e240acb3b84f4a6446c
Signed-off-by: haitao.liu <haitao.liu@amlogic.com>
PD#SWPL-224482
Problem:
edge rising interrupt may lost ;
Solution:
change rising to high level;
Verify:
BL201
Change-Id: I3102ef1a665c6193b7fde0ce9a7adf66db6d6110
Signed-off-by: Jianyi Shi <jianyi.shi@amlogic.com>
PD#SWPL-226123
Problem:
the encl will disable&enable when switch vrefresh, that
caused osd display abnormal
Solution:
the encl should keep enable and just adjust the frame rate
Verify:
t6d
Test:
DRM-OSD-101
Change-Id: I6bdb0aaaabd748d2f1e06aca558938cc6223d53e
Signed-off-by: wenlong.zhang <wenlong.zhang@amlogic.com>
(cherry picked from commit e2b054d5909155789f458ce128660e441b840293)
PD#SWPL-227503
Problem:
when plugout hdmi cable, logo memory is leaked
Solution:
decrease the ref of logo fb when ui commit happened
Verify:
s7
Test:
DRM-OSD-100
Change-Id: I75b504b038a895955987260ba58e335a7ce40c83
Signed-off-by: wenlong.zhang <wenlong.zhang@amlogic.com>
hai.cao