PD#SWPL-162202
Problem:
Adjust the size of codec_mm cma to 168M.
Solution:
Adjust the size of codec_mm cma to 168M.
Verify:
S805X2
Change-Id: I8d9987f6f817decc03f0b3b65d38683a2bff6233
Signed-off-by: yu.xie <yu.xie@amlogic.com>
PD#SWPL-164847
Problem:
gp0 do not support 1536M
Solution:
change gp0 to 1152M
Verify:
s7
Change-Id: I476310471d1e721e8ed547766ab42500631d615f
Signed-off-by: Ruixuan.li <ruixuan.li@amlogic.com>
PD#SWPL-163867
Problem:
modify FRC urgent control function
Solution:
modify FRC urgent control function
Verify:
T3X
Change-Id: I1f992ce77937733f10df1eaa0ed005e43619d302
Signed-off-by: lukang.jia <lukang.jia@amlogic.com>
PD#SWPL-163964
Problem:
only support screencap 720P for S4 and S7.
Solution:
support.
Verify:
S4 and S7
Change-Id: Ia6e3acddf1f77e6278cb428c56d4f338e448d9c0
Signed-off-by: chen.xu <chen.xu@amlogic.com>
PD#SWPL-164889
Problem:
system can not set country code
Solution:
fix config cfg80211
Verify:
ohm
Change-Id: I57458d41d6bc0020fed0cff4bb4dec1084dcbe26
Signed-off-by: jiabin.chen <jiabin.chen@amlogic.com>
PD#SWPL-161420
Problem:
t3x mode will change from 48-120hz
it will lead to garbage screen
Solution:
add force_slice parameter
Verify:
t3x-bc302
Test:
DRM-OSD-10
Change-Id: I7134c628dc412bf43a5419c8f85782a6e414b4bf
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
PD#SWPL-164674
Problem:
All TV source should support 32bit audio
Solution:
Expand 16bit audio data from FRATV module to 32bit
Verify:
T5M
Change-Id: Ic975a7c78240df472a7b7a7ae809e5eaabf49f14
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-164172
Problem:
sc2 not have dsp,resources have been released,but also register misc,
so When sc2 autostart,it accesses the /dev/hifi4dsp0 node,
so causing a panic in load firmware
Solution:
when board not have dsp,resources have been released,then return
negative value
Verify:
sc2
Change-Id: I9d0a12edddb09ef26e6798f7eb0d0029f3f4dd8d
Signed-off-by: Liming Xue <liming.xue@amlogic.com>
PD#SWPL-161721
Problem:
new function
Solution:
1.DV_IOC_GET_DV_PRECISION_DETAIL_SUPPORT get cap from cfg
2.DV_IOC_SET_DV_PRECISION_DETAIL_BYPASS set bypass
Verify:
t3x
Change-Id: I01e1f01e942349aa2241df6748100015603e185b
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-163765
Problem:
sid should not be MAX_SID
Solution:
return and report an error if sid is equal to MAX_SID
Verify:
sc2
Change-Id: If2b7fef62814b4e2ff62867cbbc1f74f9848e673
Signed-off-by: Hao Shi <hao.shi@amlogic.com>
PD#SWPL-161630
Problem:
dv display abnormal last frame
Solution:
optimize dv drop frame process
Verify:
t3x
Change-Id: I4c0b81418651dea4e2a1846c2f7b5b7da64eabc9
Signed-off-by: mingxiu.sun <mingxiu.sun@amlogic.com>
PD#SWPL-160017
Problem:
adjust the size of codec_mm cma to 168M.
Solution:
adjust the size of codec_mm cma to 168M.
Verify:
S805X3
Change-Id: Ifb71d7e219e1c4cd7e7bb01e6a0eb4b34abbd167
Signed-off-by: yu.xie <yu.xie@amlogic.com>
PD#SWPL-162200
Problem:
adjust the size of codec_mm cma to 316M for DTV PIP enable.
Solution:
adjust the size of codec_mm cma to 316M for DTV PIP enable.
Verify:
S805X3
Change-Id: Ifc8c87cab43758a3f48ad1610f77cd45c868d597
Signed-off-by: yu.xie <yu.xie@amlogic.com>
PD#SWPL-162202
Problem:
adjust the size of codec_mm cma to 328M for DTV FCC enable.
Solution:
adjust the size of codec_mm cma to 328M for DTV FCC enable.
Verify:
S805X2
Change-Id: I70dfc727f0645d86c17ad46c0aaaa4e67dc262d4
Signed-off-by: yu.xie <yu.xie@amlogic.com>
PD#SWPL-161102
Problem:
vpp call tee interface in ISR cause abnormal because it may schedule
in tee interface.
Solution:
Donot need to call the tee intreface to change vdin secure buffer state,
so remove the related code,not to call it in ISR
Verify:
t5m
Change-Id: I971a2db1821532df475b2b2c856eb569a2b8177d
Signed-off-by: haitao.liu <haitao.liu@amlogic.com>
PD#SWPL-164277
Problem:
pcie lead to power consumption high
Solution:
close phy and clock
Verify:
customer test ok
Change-Id: I9d10faf6cba4c24194673f6cfd280a045d2fbdd0
Signed-off-by: Yu Tu <yu.tu@amlogic.com>
PD#SWPL-161331
Problem:
The time to enter the AV channel is too long
Solution:
reduce the number of signal stability confirmations
Verify:
t5m
Change-Id: If24ca340695e277819e720855ecefb25cc6b9b84
Signed-off-by: haitao.liu <haitao.liu@amlogic.com>
PD#SWPL-159886
Problem:
hdcp may not be disabled when switch mode,
and cause scdc clk_ratio can't be sent as
DDC is occupied by hdcp
Solution:
enhance hdcp disable operation
Verify:
S7
Test:
switch mode quickly and repeatedly
Change-Id: Ib68a3bb6652a3d0a586ef3809995f1b29ddc7c4e
Signed-off-by: hang cheng <hang.cheng@amlogic.com>
PD#SWPL-163721
Problem:
GPIOH_0 will pull down when system bootup
Solution:
tcon top fix initial sequence
Verify:
T5M
Change-Id: I6ee7dab4b756d9d344b6b7ab76e574984e09a89a
Signed-off-by: huijie.huang <huijie.huang@amlogic.com>
PD#SWPL-162520
Problem:
there is selinux issue when access extcon path.
Solution:
use uevent instead of extcon function.
Verify:
T7C
Change-Id: If03ce34921a120582a6efdc5b823983709e4d9b7
Signed-off-by: jian zhou <jian.zhou@amlogic.com>
After burning, stuck at the logo, unable to enter the system.
This reverts commit 784e8ef37d.
Change-Id: I0124f667c8f2db59bbea5243d8fdb9a38ae60078
Signed-off-by: Song Zhang <song.zhang@amlogic.com>
PD#SWPL-163281
Problem:
The address pointed by the pointer is released after modified
Solution:
Records the initial address of the pointer and releases this
initial address at the end
Verify:
ohm
Test:
self-test
Change-Id: I99986c817d9a5020cc049038c5ddec005e641a6b
Signed-off-by: zhou.han <zhou.han@amlogic.com>
PD#SWPL-163844
Problem:
switch to 59.94hz, not set 60hz mode when qms enable
because frac mode
Solution:
set frac 0 when brr mode
Verify:
s7d
Test:
DRM-TX-75
Change-Id: I69fc38ffee456d2a917f586e7ed04dad3aa8a22d
Signed-off-by: Wenjie Qiao <wenjie.qiao@amlogic.com>
PD#SWPL-161852
Problem:
di buffer keeped by other
Solution:
add post number
Verify:
t3x-multi
Change-Id: Ia0c4253abe4a113c11a0cf856387127b74588ea6
Signed-off-by: qianqian.cai <qianqian.cai@amlogic.com>
PD#SWPL-158739
PD#SWPL-158743
Problem:
screencap osd + video use vpp loopback point,
g12a/g12b/sm1 do not support it
Solution:
modify registers as loopback post_blend
Verify:
g12a
Change-Id: I419a924bc2a72ae8d8a7c2c00ddc59b5189fc8ab
Signed-off-by: mingxiu.sun <mingxiu.sun@amlogic.com>
PD#SWPL-155224
Problem:
irq: nobody cared (try booting with the irqpoll option)
handlers:
[<0000000065ca241a>] usb_hcd_irq
Disabling IRQ #usb
Solution:
usb interrupt is coming,
but the op_regs->status register equals 0, if exit directly,
it may cause the status to remain at 0 and cause xhci to
falsely hang.
Verify:
t3x
Change-Id: I9b643c13b364ab86bb38384551bcb5008680c1ec
Signed-off-by: he.he <he.he@amlogic.com>
PD#SWPL-163329
Problem:
building will fail because last build remain the staging dir
Solution:
remove staging dir in last build
Verify:
local
Change-Id: Ie5acfb09af45027d567f12f197ec4001af0d304a
Signed-off-by: Dezhen Wang <dezhen.wang@amlogic.com>
yu.xie