PD#SWPL-160457
Problem:
memcpy beyond individual struct members
Solution:
create a named mirror of an anonymous struct union
Verify:
sc2&sm1
Change-Id: If86c3581ac473bb8e4c2b2021bedcbe44ad406e2
Signed-off-by: Hao Shi <hao.shi@amlogic.com>
PD#SWPL-175588
Problem:
Need support s7d revb
Solution:
1, add clk set for revb;
2, use clk interface for clk set
Verify:
S7D bm201
Change-Id: I168a942f6796208dd4dff67a13f065be14a40f0c
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-172965
Problem:
1 The mclk0 power supply uses the power supply inside the mclk_pll, so the
mclk0 output must ensure that mclk_pll is also enabled.
mclk_pll_clk can output clocks mclk_pll_src and fclk50m. The existence of
these two clock sources is meaningless.
2 If mclk0 uses mclk_pll as the clock source, div2 must be selected for
the clock of the later stage; otherwise, the output clock waveform of
mclk0 is abnormal.
Solution:
1 Delete the mclk_pll_src and fclk50m clock sources and set mclk_pll_clk
as the clock source of mclk0.
2 mclk0 selects div2 by default.
Verify:
s6_bl201
Change-Id: I9a8e3e1616b4c9b3b9c86990f86dc337f9f9c877
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
PD#SWPL-172965
Problem:
1 All I2C Masters (i2c_m_a-f) in a chip share an APB bus, which is
provided by sys_i2c_m_a. PWM is designed with a similar architecture, and
the APB bus of PWM is clock provided by sys_pwm_a.
2 The CLKID definition of smart card is inconsistent.
Solution:
1 The parent of sys_i2c_m_b-f is set to sys_i2c_m_a.
2 The parent of sys_pwm_b-i is set to sys_pwm_a.
3 CLKID_SC_DIV was renamed CLKID_SC.
Verify:
s6_bl201
Change-Id: I94482625f3a9fe387113edce21ed16e9dc63a074
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
PD#SWPL-172976
Problem:
add aocpu alive detection and mailbox retry mechanism to
avoid mailbox message lost due to aocpu crash or mailbox
signal lost occasionally
Solution:
add aocpu alive detection and mailbox retry mechanism
Verify:
S6-BL201
Change-Id: Ia90380a7ead99e7f00eb82bcde02201f4636dd30
Signed-off-by: Yao Jie <jie.yao@amlogic.com>
PD#SWPL-172965
Problem:
1 mclk_pll and dspa_clk output are incorrect
2 mmc failed to insmod
3 Lost sys_i2c_s_a
Solution:
1 Update the table for mclk_pll
2 Update the parent table of the dspa
3 Ignore initializing gp0_pll
4 Added sys_i2c_s_a
Verify:
s6_bl201
Change-Id: I23586623d908ef871e178acf0da8883aabc12fc9
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
PD#SWPL-158289
Problem:
1 The register corresponding to oscin was updated;
2 Put some of the key clocks into bl31 for processing.
Solution:
fixed
Verify:
pxp
Change-Id: Ie5ea8b6c507ce136ba397e8e54362b72f05cf45c
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
PD#SWPL-153862
Problem:
s6 need power domain support.
Solution:
add power domain in kernel.
Verify:
pxp
Change-Id: I5ba46225cb08a4a92d43fe25d7f6385d65bf6efb
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
PD#SWPL-160981
Problem:
The CQE v1 does not support placing tasks in memory
and does not support data encryption.
Solution:
support CQE v2
Verify:
S7 ax201
Change-Id: I0737d7b2b9e955838a9f3294d1f5faf5fd84aa17
Signed-off-by: Long <long.yu@amlogic.com>
PD#SWPL-166758
Problem:
Some customer neeed to support gpio sysfs in gki mode
Solution:
Porting common gpiolib-sysfs to common_driver
Verify:
T7_an400 & txhd2_be311
Change-Id: I72f60644fa383abe05409bfe0bf978c7ea901d92
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-173093
Problem:
build in erofs do not support amfc hardware
Solution:
add aml erofs ko to support it
Verify:
s7d bm201
Change-Id: I89ef060fabaca2f4d7cbaf26b552ba147c73f539
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-170918
PD#SWPL-161717
Problem:
Sink may support only 4k120, but its QMS range may be from
24 to 120.
Or sink may support upto 4k60, but 1080p120hz.
Solution:
Add the qms/game vrr range and vic lists to DRM group
Don't clear the EDID when forced_edid is true
Skip BRR 120 check when QMS tfr_max is false
Verify:
s7d/ross
Test:
DRM-TX-75
Change-Id: Ia65fa38bf18ae7399c9c4178665f8a3f18a03a74
Signed-off-by: zongdong.jiao <zongdong.jiao@amlogic.com>
PD#SWPL-170502
Problem:
During the switch to 444,8bit, drm will first set_nulldisp_vout_server,
and then disable hdmitx module. Since it is not currently hdmi_server,
callback send_drm_pkt cannot clear hdr pkt.
Solution:
Remove the is_cur_hdmi_mode judgment in the send_drm_pkt function,
and the hdr pkt can be cleared normally
Verify:
SC2
S5
Test:
DRM-TX-34，DRM-TX-78，DRM-TX-79，DRM-TX-80，DRM-TX-81
Change-Id: Ie85a6073c0c11a8100d344cefffecac613c82a22
Signed-off-by: ruofei.zhao <ruofei.zhao@amlogic.com>
PD#SWPL-166618
Problem:
connectors can not get connector type
Solution:
add connector type interface for connectors to get value
Verify:
t7c txhd2
Test:
DRM-OSD-44
Change-Id: Ic6fe152d419bc1a9381ada21dfa9a808e4e2c84c
Signed-off-by: congyang.huang <congyang.huang@amlogic.com>
PD#SWPL-172191
Problem:
[U] need add soundbar switch API on hdmi tx driver
Solution:
1.add sounbar_en node to control soundbar switch
write 1 is on, write 0 is off
2.if soundbar is on, not send hpd event to android
if soundbar is off, keep the original process
Verify:
T7
Test:
DRM-TX-79,DRM-TX-80,DRM-TX-81,DRM-TX-82,DRM-TX-122
Change-Id: I4d2c78064a3d158eca038cbbae945a8331dac76d
Signed-off-by: xiang.wu1 <xiang.wu1@amlogic.com>
PD#SWPL-161628
Problem:
arm64 unable get _text and module_base parameters via find symbal.
Solution:
use long type to store pagetrace information.
Verify:
sc2.
Change-Id: Id52bed43bbeed50a6d8ef0e32a54c5d9d9eab331
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
PD#SWPL-164972
Problem:
1.The AMFC module is currently configured to always on.
In order to save power consumption, power can be
removed during suspend.
2.usb power domain naming is not standard
Solution:
1.Cancel the AMFC always on configuration.
2.Change the usb domain name
Verify:
S7D
Change-Id: Ib92ffee894f248f7edb2a358bddc548543c68719
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
PD#SWPL-170855
Problem:
When QMS is enabled, the BRR may 120hz. When switches to lower rate,
video player will run under lower rate and display abnormal.
Solution:
Add brr_duration and video still run BRR rate to avoid abnormal display.
Verify:
s7
Test:
DRM-TX-38
Change-Id: I03f3588f89648145ae06b66fe4db4bb9701559b3
Signed-off-by: zongdong.jiao <zongdong.jiao@amlogic.com>
PD#SWPL-168640
Problem:
The old descriptor chain will cause dun to not be updated.
Solution:
add sg-link descriptors.
Verify:
S7
Change-Id: I50ccca0f441c4df4945a350cfdf9779497d9bba5
Signed-off-by: Long <long.yu@amlogic.com>
PD#SWPL-160157
Problem:
add api to get input param for vpp when pre-link
Solution:
add api to get input param for vpp
Verify:
t5m
Change-Id: I5f1198c94dfc840f5024d1fdb61bda2f5c5e8f4e
Signed-off-by: rong.wang <rong.wang@amlogic.com>
PD#SWPL-164404
Problem:
Back permissions are not separated from
front permissions.
Solution:
Separate back's permissions from front
and control them separately
Verify:
s5
Change-Id: I9e6465d5b8b45143a51c440d1a24160ad80087fb
Signed-off-by: xing.xu <xing.xu@amlogic.com>
PD#SWPL-166960
Problem:
need inlinecrypt for emmc
Solution:
support inlinecrypt feature
Verify:
S7
Change-Id: I1d328d527a714b1f4661b0d0c328ecedec30d0d4
Signed-off-by: Long <long.yu@amlogic.com>
PD#SWPL-167292
Problem:
need cvbs video mute api for special test
Solution:
add cvbs video mute api for drm: call
cvbs_video_mute(true / false) to mute/unmute
CVBS video output, it will keep video mute
even set cvbs output again, until drm call unmute.
Verify:
s1a
Test:
CVBS video mute/unmute + hotplug hdmitx and check cvbs mute
Change-Id: I5f6d5c28596f0cdf26c9356a2500b1fe8fe43fd7
Signed-off-by: hang cheng <hang.cheng@amlogic.com>
PD#SWPL-160150
Problem:
play HDR video under DV_STD, output as SDR
Solution:
auto change the color depth to support HDR under DV_STD
Verify:
SC2
S5
Test:
DRM-TX-90
Change-Id: Ifd830c91c68a600f5ac4c3b9e00b0709083b74e8
Signed-off-by: ruofei.zhao <ruofei.zhao@amlogic.com>
PD#SWPL-158050
Problem:
it will block suspend if send kobject uevent
when suspend
Solution:
not send uevent after suspend
Verify:
ohm
Test:
DRM-TX-105
Change-Id: I66f13e24076290f99defca8badb8d94d8b2e3e2a
Signed-off-by: hang cheng <hang.cheng@amlogic.com>
PD#SWPL-163105
Problem:
new earc Rx design
Solution:
changelist from https://scgit.amlogic.com/#/c/417153
1. new default setting for arc in
2. remove pll refresh when startup
3. when cmdc init, need refresh pll after pll default setting
4. force channel sync for channel mapping
5. add dmac bit29 check for common arc check
6. add iec raw channel status check
7. use chip info(arc_ch_sync/arc_in_new)
Verify:
use s7d
Change-Id: Id681334bfde57bfe71a870a16859e24712e262e3
Signed-off-by: qing.zhang <qing.zhang@amlogic.com>
Hao Shi