Merge tag 'mvebu-dt64-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt64 for 5.17 (part 1)

Enable more network hardware and gpios on CN9130-CRB
Add new clock node needed by comphy on armada-37xx

* tag 'mvebu-dt64-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: dts: marvell: cn9130: enable CP0 GPIO controllers
  arm64: dts: marvell: cn9130: add GPIO and SPI aliases
  arm64: dts: marvell: armada-37xx: Add xtal clock to comphy node
  arm/arm64: dts: Add MV88E6393X to CN9130-CRB device tree
  arm/arm64: dts: Enable CP0 GPIOs for CN9130-CRB

Link: https://lore.kernel.org/r/878rwjm8vj.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/marvell/armada-37xx.dtsi

@@ -265,6 +265,8 @@
 					    "lane2_sata_usb3";
 				#address-cells = <1>;
 				#size-cells = <0>;
+				clocks = <&xtalclk>;
+				clock-names = "xtal";
 
 				comphy0: phy@0 {
 					reg = <0>;

arch/arm64/boot/dts/marvell/cn9130-crb.dtsi

@@ -17,6 +17,8 @@
 		ethernet0 = &cp0_eth0;
 		ethernet1 = &cp0_eth1;
 		ethernet2 = &cp0_eth2;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
 	};
 
 	memory@0 {
@@ -71,6 +73,17 @@
 		enable-active-high;
 		regulator-always-on;
 	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>;
+		los-gpio = <&expander0 15 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+		status = "okay";
+	};
 };
 
 &uart0 {
@@ -114,6 +127,14 @@
 	};
 };
 
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
 &cp0_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cp0_i2c0_pins>;
@@ -185,6 +206,125 @@
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
+
+	switch6: switch0@6 {
+		/* Actual device is MV88E6393X */
+		compatible = "marvell,mv88e6190";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <6>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "p1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "p2";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "p3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "p4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "p5";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "p6";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "p7";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "p8";
+				phy-handle = <&switch0phy8>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "p9";
+				phy-mode = "10gbase-r";
+				sfp = <&sfp>;
+				managed = "in-band-status";
+			};
+
+			port@a {
+				reg = <10>;
+				label = "cpu";
+				ethernet = <&cp0_eth0>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: switch0phy8@8 {
+				reg = <0x8>;
+			};
+		};
+	};
 };
 
 &cp0_xmdio {

arch/arm64/boot/dts/marvell/cn9130.dtsi

@@ -11,6 +11,13 @@
 	model = "Marvell Armada CN9130 SoC";
 	compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
 		     "marvell,armada-ap807";
+
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+	};
 };
 
 /*
@@ -35,3 +42,11 @@
 #undef CP11X_PCIE0_BASE
 #undef CP11X_PCIE1_BASE
 #undef CP11X_PCIE2_BASE
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};