mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-07 19:30:30 +09:00
arm64: dts: rockchip: Add rk3566-evb1-ddr4-v10.dtsi
Prepare to add rk3566-evb1-ddr4-v10-linux.dts. Signed-off-by: Tao Huang <huangtao@rock-chips.com> Change-Id: I305555c38dd36947cff654bf708720332037707e
This commit is contained in:
Tao Huang
@@ -1,126 +1,7 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3568-evb.dtsi"
|
||||
#include "rk3566-evb1-ddr4-v10.dtsi"
|
||||
#include "rk3568-android.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3566 EVB1 DDR4 V10 Board";
|
||||
compatible = "rockchip,rk3566-evb1-ddr4-v10", "rockchip,rk3568";
|
||||
|
||||
rk_headset: rk-headset {
|
||||
compatible = "rockchip_headset";
|
||||
headset_gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_det>;
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_panel {
|
||||
power-supply = <&vcc28_lcd_n>;
|
||||
reset-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_rst_gpio>;
|
||||
};
|
||||
|
||||
&sdio_pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&pmucru CLK_RTC_32K>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
|
||||
snps,reset-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
|
||||
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim_pins &gmac0_rgmii_pins>;
|
||||
|
||||
tx_delay = <0x2a>;
|
||||
rx_delay = <0x1a>;
|
||||
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m1_xfer>;
|
||||
};
|
||||
|
||||
&wireless_wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
wifi_chip_type = "ap6398s";
|
||||
WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wireless_bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
clocks = <&pmucru CLK_RTC_32K>;
|
||||
clock-names = "ext_clock";
|
||||
//wifi-bt-power-toggle;
|
||||
uart_rts_gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart1ctsnm1>;
|
||||
pinctrl-1 = <&uart1_gpios>;
|
||||
BT,reset_gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_gpio = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
headphone {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
lcd {
|
||||
lcd_rst_gpio: lcd-rst-gpio {
|
||||
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart1_gpios: uart1-gpios {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
124
arch/arm64/boot/dts/rockchip/rk3566-evb1-ddr4-v10.dtsi
Normal file
124
arch/arm64/boot/dts/rockchip/rk3566-evb1-ddr4-v10.dtsi
Normal file
@@ -0,0 +1,124 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3568-evb.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3566 EVB1 DDR4 V10 Board";
|
||||
compatible = "rockchip,rk3566-evb1-ddr4-v10", "rockchip,rk3568";
|
||||
|
||||
rk_headset: rk-headset {
|
||||
compatible = "rockchip_headset";
|
||||
headset_gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_det>;
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_panel {
|
||||
power-supply = <&vcc28_lcd_n>;
|
||||
reset-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_rst_gpio>;
|
||||
};
|
||||
|
||||
&sdio_pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&pmucru CLK_RTC_32K>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
|
||||
snps,reset-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
|
||||
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim_pins &gmac0_rgmii_pins>;
|
||||
|
||||
tx_delay = <0x2a>;
|
||||
rx_delay = <0x1a>;
|
||||
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m1_xfer>;
|
||||
};
|
||||
|
||||
&wireless_wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
wifi_chip_type = "ap6398s";
|
||||
WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wireless_bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
clocks = <&pmucru CLK_RTC_32K>;
|
||||
clock-names = "ext_clock";
|
||||
//wifi-bt-power-toggle;
|
||||
uart_rts_gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart1ctsnm1>;
|
||||
pinctrl-1 = <&uart1_gpios>;
|
||||
BT,reset_gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_gpio = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
headphone {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
lcd {
|
||||
lcd_rst_gpio: lcd-rst-gpio {
|
||||
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart1_gpios: uart1-gpios {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user