Documentation/devicetree/bindings: remove unused regulator/act8846.txt

Change-Id: I5ff5dfc1714339b170d10e0ee8f287e7cf2a3efd
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
This commit is contained in:
Tao Huang
2018-11-06 19:30:05 +08:00
parent c58eca7173
commit 12481d820b

View File

@@ -1,167 +0,0 @@
act8846 Power Management Integrated Circuit
Required properties:
- compatible: "act,act8846"
- reg: I2C slave address
- gpios: the interrupt pin or sleep pin
use gpio get IRQ number
- regulators: This is the list of child nodes that specify the regulator
initialization data for defined regulators. Not all regulators for the given
device need to be present. The definition for each of these nodes is defined
using the standard binding for regulators found at
Documentation/devicetree/bindings/regulator/regulator.txt.
The regulator is matched with the regulator-compatible.
The valid regulator-compatible values are:
act8846: act_dcdc1, act_dcdc2, act_dcdc3, act_dcdc4, act_ldo1, act_ldo2, act_ldo3, act_ldo4, act_ldo5, act_ldo6,
act_ldo7, act_ldo8
Optional properties:
- gpios:
gpios 0 :vsel pin gpio
use vsel pin switch dcdc voltage when reset or power down
- regulator-initial-mode: default mode to set on startup
- regulator-initial-state: suspend state to set at init
- regulator-state-mem, regulator-state-disk, regulator-state-standby:
defines regulator suspend to memory, suspend to disk (hibernate) and standby respectively.
have following sub-constarints:
- regulator-state-uv: suspend voltage
- regulator-state-mode: suspend regulator operating mode
- regulator-state-enabled: is regulator enabled in this suspend state
- regulator-state-disabled: is the regulator disbled in this suspend state
-regulator-initial-mode and regulator-state-mode is set as:
REGULATOR_MODE_FAST 0x1
REGULATOR_MODE_NORMAL 0x2
REGULATOR_MODE_IDLE 0x4
REGULATOR_MODE_STANDBY 0x8
Example:
act8846: act8846@5a {
reg = <0x5a>;
status = "okay";
};
gpios =<&gpio3 GPIO_D3 GPIO_ACTIVE_LOW>;
&act8846{
compatible = "act,act8846";
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0{
reg = <0>;
regulator-compatible= "act_dcdc1";
};
dcdc2_reg: regulator@1 {
reg = <1>;
regulator-compatible = "act_dcdc2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-initial-state = <3>;
regulator-state-mem {
regulator-state-enabled;
regulator-state-uv = <1200000>;
};
};
dcdc3_reg: regulator@2 {
reg = <2>;
regulator-compatible = "act_dcdc3";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-initial-state = <3>;
regulator-state-mem {
regulator-state-enabled;
regulator-state-uv = <1200000>;
};
};
dcdc4_reg: regulator@3 {
reg = <3>;
regulator-compatible = "act_dcdc4";
regulator-initial-state = <3>;
regulator-state-mem {
regulator-state-enabled;
regulator-state-uv = <3300000>;
};
};
ldo1_reg: regulator@4 {
reg = <4>;
regulator-compatible= "act_ldo1";
regulator-initial-state = <3>;
regulator-state-mem {
regulator-state-enabled;
};
};
ldo2_reg: regulator@5 {
reg = <5>;
regulator-compatible = "act_ldo2";
regulator-initial-state = <3>;
regulator-state-mem {
regulator-state-enabled;
};
};
ldo3_reg: regulator@6 {
reg = <6>;
regulator-compatible = "act_ldo3";
regulator-initial-state = <3>;
regulator-state-mem {
regulator-state-enabled;
};
};
ldo4_reg:regulator@7 {
reg = <7>;
regulator-compatible = "act_ldo4";
regulator-initial-state = <3>;
regulator-state-mem {
regulator-state-enabled;
};
};
ldo5_reg: regulator@8 {
reg = <8>;
regulator-compatible= "act_ldo5";
regulator-initial-state = <3>;
regulator-state-mem {
regulator-state-enabled;
};
};
ldo6_reg: regulator@9 {
reg = <9>;
regulator-compatible = "act_ldo6";
regulator-initial-state = <3>;
regulator-state-mem {
regulator-state-enabled;
};
};
ldo7_reg: regulator@10 {
reg = <10>;
regulator-compatible = "act_ldo7";
regulator-initial-state = <3>;
regulator-state-mem {
regulator-state-enabled;
};
};
ldo8_reg: regulator@11 {
reg = <11>;
regulator-compatible = "act_ldo8";
regulator-initial-state = <3>;
regulator-state-mem {
regulator-state-enabled;
};
};
};
};