mirror of
https://github.com/hardkernel/linux.git
synced 2026-04-11 15:38:07 +09:00
regulator: rockchip: lp8752: support lp8752 regulator
updata lp8752 driver. add devicetree bindings for lp8752. Change-Id: I21cdbde985d4663862b56c28429c41d9d3c38c36 Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
This commit is contained in:
Elaine Zhang
44
Documentation/devicetree/bindings/regulator/lp8752.txt
Normal file
44
Documentation/devicetree/bindings/regulator/lp8752.txt
Normal file
@@ -0,0 +1,44 @@
|
||||
Binding for TI/National Semiconductor LP8752 Driver
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,lp8752"
|
||||
- reg: I2C slave address. 0x60 = LP8752
|
||||
|
||||
Optional properties:
|
||||
Sub nodes for regulator_init_data
|
||||
LP8752 has maximum 4 nodes. (child name: buck0 ~ 3)
|
||||
For more details, please see the following binding document.
|
||||
(Documentation/devicetree/bindings/regulator/regulator.txt)
|
||||
|
||||
Datasheet
|
||||
- LP8752: http://www.ti.com/lit/ds/symlink/lp8752.pdf
|
||||
|
||||
Example 1) LP8752
|
||||
|
||||
lp8752: lp8752@60 {
|
||||
compatible = "ti,lp8752";
|
||||
status = "disabled";
|
||||
reg = <0x60>;
|
||||
|
||||
vin0-supply = <&vcc5v0_sys>;
|
||||
vin1-supply = <&vcc5v0_sys>;
|
||||
/.............../
|
||||
|
||||
regulators {
|
||||
lp8752_buck0: lp8752_buck0 {
|
||||
regulator-name = "lp8752_buck0";
|
||||
regulator-min-microvolt = <735000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
lp8752_buck1: lp8752_buck1 {
|
||||
regulator-name = "lp8752_buck1";
|
||||
regulator-min-microvolt = <735000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
/....../
|
||||
};
|
||||
};
|
||||
@@ -295,6 +295,15 @@ config REGULATOR_LP872X
|
||||
help
|
||||
This driver supports LP8720/LP8725 PMIC
|
||||
|
||||
config REGULATOR_LP8752
|
||||
tristate "TI LP8752 High Performance PMU driver"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver supports LP8752 High Performance PMU driver. This
|
||||
chip contains four step-down DC/DC converters which can support
|
||||
4 mode multiphase configuration.
|
||||
|
||||
config REGULATOR_LP8755
|
||||
tristate "TI LP8755 High Performance PMU driver"
|
||||
depends on I2C
|
||||
|
||||
@@ -41,6 +41,7 @@ obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
|
||||
obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
|
||||
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
|
||||
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
|
||||
obj-$(CONFIG_REGULATOR_LP8752) += lp8752.o
|
||||
obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
|
||||
obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
|
||||
obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o
|
||||
|
||||
311
drivers/regulator/lp8752.c
Normal file
311
drivers/regulator/lp8752.c
Normal file
@@ -0,0 +1,311 @@
|
||||
/*
|
||||
* LP8752 High Performance Power Management Unit : System Interface Driver
|
||||
*
|
||||
* Author: zhangqing <zhangqing@rock-chips.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/uaccess.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
#define LP8752_CTRL_BUCK0 0x02
|
||||
#define LP8752_CTRL_BUCK1 0x04
|
||||
#define LP8752_CTRL_BUCK2 0x06
|
||||
#define LP8752_CTRL_BUCK3 0x08
|
||||
|
||||
#define LP8752_VOUT_BUCK0 0x0a
|
||||
#define LP8752_VOUT_BUCK1 0x0c
|
||||
#define LP8752_VOUT_BUCK2 0x0e
|
||||
#define LP8752_VOUT_BUCK3 0x10
|
||||
|
||||
#define LP8752_BUCK_VSEL_MASK 0xff
|
||||
#define LP8752_REG_MAX 0x2f
|
||||
|
||||
enum lp8752_bucks {
|
||||
LP8752_BUCK0 = 0,
|
||||
LP8752_BUCK1,
|
||||
LP8752_BUCK2,
|
||||
LP8752_BUCK3,
|
||||
LP8752_BUCK_MAX,
|
||||
};
|
||||
|
||||
static const struct regulator_linear_range lp8752_buck_voltage_ranges[] = {
|
||||
REGULATOR_LINEAR_RANGE(500000, 0, 23, 10000),
|
||||
REGULATOR_LINEAR_RANGE(735000, 24, 157, 5000),
|
||||
REGULATOR_LINEAR_RANGE(1420000, 158, 255, 20000),
|
||||
};
|
||||
|
||||
struct lp8752_platform_data {
|
||||
int nphase;
|
||||
struct device_node *of_node[LP8752_BUCK_MAX];
|
||||
struct regulator_desc desc;
|
||||
struct regulator_init_data *buck_data[LP8752_BUCK_MAX];
|
||||
};
|
||||
|
||||
struct lp8752_mphase {
|
||||
int nreg;
|
||||
int buck_id[LP8752_BUCK_MAX];
|
||||
};
|
||||
|
||||
struct lp8752_chip {
|
||||
int nphase;
|
||||
struct device *dev;
|
||||
struct regmap *regmap;
|
||||
struct lp8752_platform_data *pdata;
|
||||
struct regulator_dev *rdev[LP8752_BUCK_MAX];
|
||||
};
|
||||
|
||||
static int lp8752_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
||||
{
|
||||
struct lp8752_chip *pchip = rdev_get_drvdata(rdev);
|
||||
u8 msk = BIT(1);
|
||||
int ret;
|
||||
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_FAST:
|
||||
/* forced pwm mode */
|
||||
ret = regmap_update_bits(pchip->regmap,
|
||||
rdev->desc->enable_reg,
|
||||
msk, 0x1);
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
/* automatic pwm/pfm mode */
|
||||
ret = regmap_update_bits(pchip->regmap,
|
||||
rdev->desc->enable_reg,
|
||||
msk, 0x0);
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static unsigned int lp8752_buck_get_mode(struct regulator_dev *rdev)
|
||||
{
|
||||
struct lp8752_chip *pchip = rdev_get_drvdata(rdev);
|
||||
int ret;
|
||||
unsigned int reg;
|
||||
|
||||
ret = regmap_read(pchip->regmap, rdev->desc->enable_reg, ®);
|
||||
if (ret < 0) {
|
||||
dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return (reg & BIT(1)) ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
|
||||
}
|
||||
|
||||
static struct regulator_ops lp8752_buck_ops = {
|
||||
.map_voltage = regulator_map_voltage_linear_range,
|
||||
.list_voltage = regulator_list_voltage_linear_range,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.set_mode = lp8752_buck_set_mode,
|
||||
.get_mode = lp8752_buck_get_mode,
|
||||
};
|
||||
|
||||
#define lp8752_rail(_id) "lp8752_buck"#_id
|
||||
#define vin(_id) "vin"#_id
|
||||
|
||||
static const struct lp8752_mphase mphase_buck[] = {
|
||||
{ 1, { LP8752_BUCK0} },
|
||||
{ 2, { LP8752_BUCK0, LP8752_BUCK3 } },
|
||||
{ 3, { LP8752_BUCK0, LP8752_BUCK2, LP8752_BUCK3 } },
|
||||
{ 4, { LP8752_BUCK0, LP8752_BUCK1, LP8752_BUCK2, LP8752_BUCK3 } },
|
||||
};
|
||||
|
||||
static struct of_regulator_match lp8752_reg_matches[] = {
|
||||
{ .name = "lp8752_buck0", .driver_data = (void *)0 },
|
||||
{ .name = "lp8752_buck1", .driver_data = (void *)1 },
|
||||
{ .name = "lp8752_buck2", .driver_data = (void *)2 },
|
||||
{ .name = "lp8752_buck3", .driver_data = (void *)3 },
|
||||
};
|
||||
|
||||
static int lp8752_init_data(struct lp8752_chip *pchip)
|
||||
{
|
||||
int icnt, buck_id, count;
|
||||
struct lp8752_platform_data *pdata = pchip->pdata;
|
||||
struct device_node *regs, *lp8752_np;
|
||||
|
||||
lp8752_np = of_node_get(pchip->dev->of_node);
|
||||
if (!lp8752_np) {
|
||||
dev_err(pchip->dev, "Failed to find device node\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
regs = of_find_node_by_name(lp8752_np, "regulators");
|
||||
if (!regs)
|
||||
return -ENODEV;
|
||||
|
||||
count = of_regulator_match(pchip->dev, regs, lp8752_reg_matches,
|
||||
LP8752_BUCK_MAX);
|
||||
of_node_put(regs);
|
||||
if ((count <= 0) || (count > LP8752_BUCK_MAX))
|
||||
return -ENODEV;
|
||||
|
||||
pchip->nphase = (count - 1) & 0xf;
|
||||
|
||||
/* set default data based on multi-phase config */
|
||||
for (icnt = 0; icnt < mphase_buck[pchip->nphase].nreg; icnt++) {
|
||||
buck_id = mphase_buck[pchip->nphase].buck_id[icnt];
|
||||
pdata->buck_data[buck_id] =
|
||||
lp8752_reg_matches[buck_id].init_data;
|
||||
pdata->of_node[buck_id] = lp8752_reg_matches[buck_id].of_node;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#define lp8752_buck_desc(_id)\
|
||||
{\
|
||||
.name = lp8752_rail(_id),\
|
||||
.id = LP8752_BUCK##_id,\
|
||||
.supply_name = vin(_id),\
|
||||
.ops = &lp8752_buck_ops,\
|
||||
.n_voltages = LP8752_BUCK_VSEL_MASK + 1,\
|
||||
.linear_ranges = lp8752_buck_voltage_ranges,\
|
||||
.n_linear_ranges = ARRAY_SIZE(lp8752_buck_voltage_ranges),\
|
||||
.type = REGULATOR_VOLTAGE,\
|
||||
.enable_reg = LP8752_CTRL_BUCK##_id,\
|
||||
.enable_mask = BIT(7),\
|
||||
.vsel_reg = LP8752_VOUT_BUCK##_id,\
|
||||
.vsel_mask = LP8752_BUCK_VSEL_MASK,\
|
||||
.enable_time = 400,\
|
||||
.owner = THIS_MODULE,\
|
||||
}
|
||||
|
||||
static struct regulator_desc lp8752_reg_desc[] = {
|
||||
lp8752_buck_desc(0),
|
||||
lp8752_buck_desc(1),
|
||||
lp8752_buck_desc(2),
|
||||
lp8752_buck_desc(3),
|
||||
};
|
||||
|
||||
static int lp8752_regulator_init(struct lp8752_chip *pchip)
|
||||
{
|
||||
int ret, icnt, buck_id;
|
||||
struct lp8752_platform_data *pdata = pchip->pdata;
|
||||
struct regulator_config rconfig = { };
|
||||
|
||||
rconfig.regmap = pchip->regmap;
|
||||
rconfig.dev = pchip->dev;
|
||||
rconfig.driver_data = pchip;
|
||||
|
||||
for (icnt = 0; icnt < mphase_buck[pchip->nphase].nreg; icnt++) {
|
||||
buck_id = mphase_buck[pchip->nphase].buck_id[icnt];
|
||||
rconfig.init_data = pdata->buck_data[buck_id];
|
||||
rconfig.of_node = pdata->of_node[buck_id];
|
||||
pchip->rdev[buck_id] =
|
||||
devm_regulator_register(pchip->dev,
|
||||
&lp8752_reg_desc[buck_id],
|
||||
&rconfig);
|
||||
if (IS_ERR(pchip->rdev[buck_id])) {
|
||||
ret = PTR_ERR(pchip->rdev[buck_id]);
|
||||
pchip->rdev[buck_id] = NULL;
|
||||
dev_err(pchip->dev, "regulator init failed: buck %d\n",
|
||||
buck_id);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct regmap_config lp8752_regmap = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = LP8752_REG_MAX,
|
||||
};
|
||||
|
||||
static int lp8752_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
int ret;
|
||||
struct lp8752_chip *pchip;
|
||||
struct lp8752_platform_data *pdata = dev_get_platdata(&client->dev);
|
||||
|
||||
pchip = devm_kzalloc(&client->dev,
|
||||
sizeof(struct lp8752_chip), GFP_KERNEL);
|
||||
if (!pchip)
|
||||
return -ENOMEM;
|
||||
|
||||
pchip->dev = &client->dev;
|
||||
pchip->regmap = devm_regmap_init_i2c(client, &lp8752_regmap);
|
||||
if (IS_ERR(pchip->regmap)) {
|
||||
ret = PTR_ERR(pchip->regmap);
|
||||
dev_err(&client->dev, "fail to allocate regmap %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
i2c_set_clientdata(client, pchip);
|
||||
|
||||
ret = regmap_update_bits(pchip->regmap,
|
||||
LP8752_CTRL_BUCK0,
|
||||
(1 << 0), 0x1);
|
||||
ret = regmap_update_bits(pchip->regmap,
|
||||
LP8752_CTRL_BUCK2,
|
||||
(1 << 0), 0x1);
|
||||
|
||||
if (!pdata) {
|
||||
pchip->pdata = devm_kzalloc(pchip->dev,
|
||||
sizeof(struct lp8752_platform_data),
|
||||
GFP_KERNEL);
|
||||
if (!pchip->pdata)
|
||||
return -ENOMEM;
|
||||
|
||||
ret = lp8752_init_data(pchip);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "fail to initialize chip\n");
|
||||
return ret;
|
||||
}
|
||||
} else {
|
||||
pchip->pdata = pdata;
|
||||
pchip->nphase = pdata->nphase;
|
||||
}
|
||||
|
||||
lp8752_regulator_init(pchip);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id lp8752_of_match[] = {
|
||||
{ .compatible = "ti,lp8752", },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, lp8752_of_match);
|
||||
|
||||
static const struct i2c_device_id lp8752_id[] = {
|
||||
{"lp8752", 0},
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, lp8752_id);
|
||||
|
||||
static struct i2c_driver lp8752_i2c_driver = {
|
||||
.probe = lp8752_probe,
|
||||
.id_table = lp8752_id,
|
||||
.driver = {
|
||||
.name = "lp8752",
|
||||
.of_match_table = of_match_ptr(lp8752_of_match),
|
||||
},
|
||||
};
|
||||
|
||||
module_i2c_driver(lp8752_i2c_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Texas Instruments lp8752 driver");
|
||||
MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Reference in New Issue
Block a user