mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-08 11:50:43 +09:00
rk2818-socpm.c: set callback function. pm.c: delete unused code,move lp8725 voltage control into callback
This commit is contained in:
宋秀杰
@@ -2269,18 +2269,77 @@ void __tcmfunc rk2818_soc_general_reg_suspend(void)
|
||||
rk2818_socpm_set_gpio(RK2818_PIN_PG7,0,0);
|
||||
#endif
|
||||
}
|
||||
void __tcmfunc rk2818_pm_set_vol(void)
|
||||
|
||||
void __tcmfunc pmu_suspend(void)
|
||||
{
|
||||
//struct regulator *ldo1,*ldo2,*ldo4,*ldo5;
|
||||
struct regulator *lilo1,*lilo2;
|
||||
|
||||
/*ldo1 = regulator_get(NULL, "ldo1");
|
||||
regulator_disable(ldo1);
|
||||
ldo2 = regulator_get(NULL, "ldo2");
|
||||
regulator_disable(ldo2);
|
||||
ldo4 = regulator_get(NULL, "ldo4");
|
||||
regulator_disable(ldo4);
|
||||
ldo5 = regulator_get(NULL, "ldo5");
|
||||
regulator_disable(ldo5);*/
|
||||
|
||||
lilo1 = regulator_get(NULL, "lilo1");
|
||||
regulator_set_voltage(lilo1,2800000,2800000);
|
||||
lilo2 = regulator_get(NULL, "lilo2");
|
||||
regulator_set_voltage(lilo2,2800000,2800000);
|
||||
}
|
||||
|
||||
void __tcmfunc pmu_resume(void)
|
||||
{
|
||||
//struct regulator *ldo1,*ldo2,*ldo4,*ldo5;
|
||||
struct regulator *lilo1,*lilo2;
|
||||
|
||||
/*ldo1 = regulator_get(NULL, "ldo1");
|
||||
regulator_enable(ldo1);
|
||||
|
||||
ldo2 = regulator_get(NULL, "ldo2");
|
||||
regulator_enable(ldo2);
|
||||
|
||||
ldo4 = regulator_get(NULL, "ldo4");
|
||||
regulator_enable(ldo4);
|
||||
|
||||
ldo5 = regulator_get(NULL, "ldo5");
|
||||
regulator_enable(ldo5);*/
|
||||
|
||||
lilo1 = regulator_get(NULL, "lilo1");
|
||||
regulator_set_voltage(lilo1,3000000,3000000);
|
||||
lilo2 = regulator_get(NULL, "lilo2");
|
||||
regulator_set_voltage(lilo2,3000000,3000000);
|
||||
}
|
||||
|
||||
void __tcmfunc rk2818_pm_suspend_ctr_pin(void)
|
||||
{
|
||||
pmu_suspend( );
|
||||
rk2818_socpm_set_gpio(RK2818_PIN_PC2,1,0);
|
||||
//rk2818_socpm_set_gpio(RK2818_PIN_PC7,1,0);
|
||||
}
|
||||
void __tcmfunc rk2818_pm_resume_vol(void)
|
||||
void __tcmfunc rk2818_pm_resume_ctr_pin(void)
|
||||
{
|
||||
|
||||
rk2818_socpm_set_gpio(RK2818_PIN_PC2,1,1);
|
||||
//rk2818_socpm_set_gpio(RK2818_PIN_PC7,1,0);
|
||||
pmu_resume( );
|
||||
}
|
||||
|
||||
static struct rk2818_pm_callback_st __tcmdata callback_init={
|
||||
.scu_suspend=(pm_scu_suspend)rk2818_pm_scu_suspend,
|
||||
.general_reg_suspend=(pm_general_reg_suspend)rk2818_soc_general_reg_suspend,
|
||||
.set_pin=(pm_general_reg_suspend)rk2818_pm_suspend_ctr_pin,
|
||||
.resume_pin=(pm_resume_ctr_pin)rk2818_pm_resume_ctr_pin,
|
||||
};
|
||||
#else
|
||||
#define pm_set_general_cpu_reg(a)
|
||||
#define rk2818_pm_set_vol()
|
||||
#define rk2818_pm_resume_vol()
|
||||
static struct rk2818_pm_callback_st __tcmdata callback_init={
|
||||
.scu_suspend=NULL,
|
||||
.general_reg_suspend=NULL,
|
||||
.set_pin=NULL,
|
||||
.resume_pin=NULL,
|
||||
};
|
||||
#endif
|
||||
static void __init machine_rk2818_init_irq(void)
|
||||
{
|
||||
@@ -2293,8 +2352,7 @@ static void __init machine_rk2818_board_init(void)
|
||||
{
|
||||
printk("3x machine_rk2818_board_init\n");
|
||||
|
||||
rk2818_socpm_int( (pm_scu_suspend) rk2818_pm_scu_suspend,(pm_general_reg_suspend) rk2818_soc_general_reg_suspend,
|
||||
(pm_set_suspendvol) rk2818_pm_set_vol,(pm_resume_vol) rk2818_pm_resume_vol);
|
||||
rk2818_socpm_init(&callback_init);
|
||||
rk2818_power_on();
|
||||
pm_power_off = rk2818_power_off;
|
||||
#ifdef CONFIG_SPI_FPGA_FW
|
||||
|
||||
72
arch/arm/mach-rk2818/board-rahosdk.c
Normal file → Executable file
72
arch/arm/mach-rk2818/board-rahosdk.c
Normal file → Executable file
@@ -2192,18 +2192,77 @@ void __tcmfunc rk2818_soc_general_reg_suspend(void)
|
||||
rk2818_socpm_set_gpio(RK2818_PIN_PG7,0,0);
|
||||
#endif
|
||||
}
|
||||
void __tcmfunc rk2818_pm_set_vol(void)
|
||||
|
||||
void __tcmfunc pmu_suspend(void)
|
||||
{
|
||||
//struct regulator *ldo1,*ldo2,*ldo4,*ldo5;
|
||||
struct regulator *lilo1,*lilo2;
|
||||
|
||||
/*ldo1 = regulator_get(NULL, "ldo1");
|
||||
regulator_disable(ldo1);
|
||||
ldo2 = regulator_get(NULL, "ldo2");
|
||||
regulator_disable(ldo2);
|
||||
ldo4 = regulator_get(NULL, "ldo4");
|
||||
regulator_disable(ldo4);
|
||||
ldo5 = regulator_get(NULL, "ldo5");
|
||||
regulator_disable(ldo5);*/
|
||||
|
||||
lilo1 = regulator_get(NULL, "lilo1");
|
||||
regulator_set_voltage(lilo1,2800000,2800000);
|
||||
lilo2 = regulator_get(NULL, "lilo2");
|
||||
regulator_set_voltage(lilo2,2800000,2800000);
|
||||
}
|
||||
|
||||
void __tcmfunc pmu_resume(void)
|
||||
{
|
||||
//struct regulator *ldo1,*ldo2,*ldo4,*ldo5;
|
||||
struct regulator *lilo1,*lilo2;
|
||||
|
||||
/*ldo1 = regulator_get(NULL, "ldo1");
|
||||
regulator_enable(ldo1);
|
||||
|
||||
ldo2 = regulator_get(NULL, "ldo2");
|
||||
regulator_enable(ldo2);
|
||||
|
||||
ldo4 = regulator_get(NULL, "ldo4");
|
||||
regulator_enable(ldo4);
|
||||
|
||||
ldo5 = regulator_get(NULL, "ldo5");
|
||||
regulator_enable(ldo5);*/
|
||||
|
||||
lilo1 = regulator_get(NULL, "lilo1");
|
||||
regulator_set_voltage(lilo1,3000000,3000000);
|
||||
lilo2 = regulator_get(NULL, "lilo2");
|
||||
regulator_set_voltage(lilo2,3000000,3000000);
|
||||
}
|
||||
|
||||
void __tcmfunc rk2818_pm_suspend_ctr_pin(void)
|
||||
{
|
||||
pmu_suspend( );
|
||||
rk2818_socpm_set_gpio(RK2818_PIN_PC2,1,0);
|
||||
//rk2818_socpm_set_gpio(RK2818_PIN_PC7,1,0);
|
||||
}
|
||||
void __tcmfunc rk2818_pm_resume_vol(void)
|
||||
void __tcmfunc rk2818_pm_resume_ctr_pin(void)
|
||||
{
|
||||
|
||||
rk2818_socpm_set_gpio(RK2818_PIN_PC2,1,1);
|
||||
//rk2818_socpm_set_gpio(RK2818_PIN_PC7,1,0);
|
||||
pmu_resume( );
|
||||
}
|
||||
|
||||
static struct rk2818_pm_callback_st __tcmdata callback_init={
|
||||
.scu_suspend=(pm_scu_suspend)rk2818_pm_scu_suspend,
|
||||
.general_reg_suspend=(pm_general_reg_suspend)rk2818_soc_general_reg_suspend,
|
||||
.set_pin=(pm_general_reg_suspend)rk2818_pm_suspend_ctr_pin,
|
||||
.resume_pin=(pm_resume_ctr_pin)rk2818_pm_resume_ctr_pin,
|
||||
};
|
||||
#else
|
||||
#define pm_set_general_cpu_reg(a)
|
||||
#define rk2818_pm_set_vol()
|
||||
#define rk2818_pm_resume_vol()
|
||||
static struct rk2818_pm_callback_st __tcmdata callback_init={
|
||||
.scu_suspend=NULL,
|
||||
.general_reg_suspend=NULL,
|
||||
.set_pin=NULL,
|
||||
.resume_pin=NULL,
|
||||
};
|
||||
#endif
|
||||
static void __init machine_rk2818_init_irq(void)
|
||||
{
|
||||
@@ -2216,8 +2275,7 @@ static void __init machine_rk2818_board_init(void)
|
||||
{
|
||||
printk("3x machine_rk2818_board_init\n");
|
||||
|
||||
rk2818_socpm_int( (pm_scu_suspend) rk2818_pm_scu_suspend,(pm_general_reg_suspend) rk2818_soc_general_reg_suspend,
|
||||
(pm_set_suspendvol) rk2818_pm_set_vol,(pm_resume_vol) rk2818_pm_resume_vol);
|
||||
rk2818_socpm_init(&callback_init);
|
||||
rk2818_power_on();
|
||||
pm_power_off = rk2818_power_off;
|
||||
|
||||
|
||||
@@ -75,8 +75,8 @@ ssize_t rk2818_socpm_attr_show(int type,char *buf);
|
||||
|
||||
typedef void (*pm_scu_suspend)(unsigned int *tempdata,int regoff);
|
||||
typedef void (*pm_general_reg_suspend)(void);
|
||||
typedef void (*pm_set_suspendvol)(void);
|
||||
typedef void (*pm_resume_vol)(void);
|
||||
typedef void (*pm_suspend_ctr_pin)(void);
|
||||
typedef void (*pm_resume_ctr_pin)(void);
|
||||
|
||||
struct rk2818_pm_soc_st{
|
||||
unsigned int *reg_save;
|
||||
@@ -94,11 +94,10 @@ u8 attr_flag;
|
||||
};
|
||||
|
||||
struct rk2818_pm_callback_st{
|
||||
int data;
|
||||
pm_scu_suspend scu_suspend;
|
||||
pm_general_reg_suspend general_reg_suspend;
|
||||
pm_set_suspendvol set_suspendvol;
|
||||
pm_resume_vol resume_vol;
|
||||
pm_suspend_ctr_pin set_pin;
|
||||
pm_resume_ctr_pin resume_pin;
|
||||
};
|
||||
|
||||
|
||||
@@ -113,10 +112,6 @@ struct rk2818_pm_soc_st *gpio1;
|
||||
//struct rk2818_pm_callback_st *callback;
|
||||
unsigned int *save_reg;
|
||||
unsigned int *save_ch;
|
||||
pm_scu_suspend scu_suspend;
|
||||
pm_general_reg_suspend general_reg_suspend;
|
||||
pm_set_suspendvol set_suspendvol;
|
||||
pm_resume_vol resume_vol;
|
||||
};
|
||||
|
||||
/***********************scu SCU_CLKSEL0 reg bit************************************/
|
||||
@@ -125,11 +120,6 @@ pm_resume_vol resume_vol;
|
||||
#define PM_SET_BIT(b) (1<<b)
|
||||
#define PM_GET_BIT(val,b) ((val&(1<<b))>>b)
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
/***********************scu SCU_CLKSEL0 reg bit************************************/
|
||||
|
||||
#define SCU_GATE0CLK_ALL_EN 0
|
||||
@@ -311,9 +301,8 @@ enum
|
||||
PM_SCU_GPIO_SWPORTC_NUM
|
||||
};
|
||||
|
||||
void rk2818_socpm_int(pm_scu_suspend scu,pm_general_reg_suspend general,
|
||||
pm_set_suspendvol setvol,pm_resume_vol resumevol);
|
||||
extern struct rk2818_pm_st __tcmdata rk2818_soc_pm;
|
||||
int rk2818_socpm_init(struct rk2818_pm_callback_st *call_back);
|
||||
extern struct rk2818_pm_st __tcmdata rk2818_soc_pm;
|
||||
extern int __tcmfunc rk2818_socpm_gpio_pullupdown(unsigned int gpio,eGPIOPullType_t GPIOPullUpDown);
|
||||
extern int __tcmfunc rk2818_socpm_set_gpio(unsigned int gpio,unsigned int output,unsigned int level);
|
||||
|
||||
@@ -322,7 +311,7 @@ extern int __tcmfunc rk2818_socpm_set_gpio(unsigned int gpio,unsigned int outpu
|
||||
void __tcmfunc rk2818_socpm_suspend_first(void);
|
||||
void __tcmfunc rk2818_socpm_suspend(void);
|
||||
|
||||
void __tcmfunc rk2818_socpm_resume_first(void);
|
||||
void __tcmfunc rk2818_socpm_resume_last(void);
|
||||
void __tcmfunc rk2818_socpm_resume(void);
|
||||
void rk2818_socpm_print(void);
|
||||
#else
|
||||
@@ -331,7 +320,7 @@ void rk2818_socpm_print(void);
|
||||
#define rk2818_socpm_set_gpio(a,b,c)
|
||||
#define rk2818_socpm_suspend_first()
|
||||
#define rk2818_socpm_suspend()
|
||||
#define rk2818_socpm_resume_first()
|
||||
#define rk2818_socpm_resume_last()
|
||||
#define rk2818_socpm_resume()
|
||||
#define rk2818_socpm_print()
|
||||
|
||||
|
||||
@@ -64,15 +64,6 @@ static inline u32 sdram_get_mem_type(void)
|
||||
|
||||
#define ASM_LOOP_INSTRUCTION_NUM 4
|
||||
|
||||
/*static noinline void __tcmlocalfunc tcm_udelay(unsigned long usecs, u32 arm_freq_mhz)
|
||||
{
|
||||
volatile unsigned int cycle;
|
||||
|
||||
cycle = usecs * arm_freq_mhz / ASM_LOOP_INSTRUCTION_NUM;
|
||||
|
||||
while (cycle--) {}
|
||||
}*/
|
||||
|
||||
#define CLK_GATE_SDRAM_MASK ((1 << (CLK_GATE_SDRAM_COMMON & 31)) | (1 << (CLK_GATE_SDRAM_CONTROLLER & 31)))
|
||||
#define CLK_GATE_MOBILESDRAM_MASK ((1 << (CLK_GATE_SDRAM_COMMON & 31)) | (1 << (CLK_GATE_MOBILE_SDRAM_CONTROLLER & 31)))
|
||||
|
||||
@@ -170,7 +161,7 @@ void __tcmfunc sdram_exit_self_refresh(u32 ctrl_reg_62)
|
||||
tcm_udelay(100, 24); //DRVDelayUs(100); 延时一下比较安全，保证退出后稳定
|
||||
}
|
||||
|
||||
#if 1
|
||||
#if 0
|
||||
static void __tcmlocalfunc noinline tcm_printch(char byte)
|
||||
{
|
||||
unsigned int timeout;
|
||||
@@ -205,400 +196,8 @@ static void __tcmlocalfunc noinline tcm_printhex(unsigned int hex)
|
||||
}
|
||||
#endif
|
||||
|
||||
//#define RK2818_MOBLIE_PM_CON
|
||||
#ifdef RK2818_MOBLIE_PM_CON
|
||||
|
||||
#define RK2818_MOBLIE_PM_PRT_ORIGINAL_REG
|
||||
//#define RK2818_MOBLIE_PM_PRT_CHANGED_REG
|
||||
|
||||
#define PM_SAVE_REG_NUM 4
|
||||
struct rk2818_pm_st{
|
||||
unsigned int *pm_scu_reg;
|
||||
unsigned int *pm_cpu_reg;
|
||||
unsigned int *pm_gpio0_reg;
|
||||
unsigned int *pm_gpio1_reg;
|
||||
unsigned int *savereg;
|
||||
|
||||
unsigned int *pm_scu_reg_ch;
|
||||
unsigned int *pm_cpu_reg_ch;
|
||||
unsigned int *pm_gpio0_reg_ch;
|
||||
unsigned int *pm_gpio1_reg_ch;
|
||||
unsigned int *save_ch;
|
||||
|
||||
u16 scu_regbit;
|
||||
u16 cpu_regbit;
|
||||
u16 gpio0_regbit;
|
||||
u16 gpio1_regbit;
|
||||
};
|
||||
unsigned int __tcmdata pm_scu_reg_save[PM_SCU_REG_NUM];
|
||||
unsigned int __tcmdata pm_cpu_reg_save[PM_GENERAL_CPU_REG];
|
||||
unsigned int __tcmdata pm_gpio0_reg_save[PM_SCU_GPIO_SWPORTC_NUM];
|
||||
unsigned int __tcmdata pm_gpio1_reg_save[PM_SCU_GPIO_SWPORTC_NUM];
|
||||
unsigned int __tcmdata pm_savereg[PM_SAVE_REG_NUM];
|
||||
|
||||
unsigned int __tcmdata pm_scu_reg_ch[PM_SCU_REG_NUM];
|
||||
unsigned int __tcmdata pm_cpu_reg_ch[PM_GENERAL_CPU_REG];
|
||||
unsigned int __tcmdata pm_gpio0_reg_save_ch[PM_SCU_GPIO_SWPORTC_NUM];
|
||||
unsigned int __tcmdata pm_gpio1_reg_save_ch[PM_SCU_GPIO_SWPORTC_NUM];
|
||||
unsigned int __tcmdata savereg_ch[PM_SAVE_REG_NUM];
|
||||
|
||||
struct rk2818_pm_st __tcmdata pm_save={
|
||||
.pm_scu_reg=&pm_scu_reg_save[0],
|
||||
.pm_cpu_reg=&pm_cpu_reg_save[0],
|
||||
.pm_gpio0_reg=&pm_gpio0_reg_save[0],
|
||||
.pm_gpio1_reg=&pm_gpio1_reg_save[0],
|
||||
.savereg=&pm_savereg[0],
|
||||
|
||||
.pm_scu_reg_ch=&pm_scu_reg_ch[0],
|
||||
.pm_cpu_reg_ch=&pm_cpu_reg_ch[0],
|
||||
.pm_gpio0_reg_ch=&pm_gpio0_reg_save_ch[0],
|
||||
.pm_gpio1_reg_ch=&pm_gpio1_reg_save_ch[0],
|
||||
.save_ch=&savereg_ch[0],
|
||||
};
|
||||
|
||||
#if 0
|
||||
#define rk2818_define_value \
|
||||
unsigned int pm_scu_reg_save[PM_SCU_REG_NUM];\
|
||||
unsigned int pm_cpu_reg_save[PM_GENERAL_CPU_REG];\
|
||||
unsigned int pm_gpio0_reg_save[PM_SCU_GPIO_SWPORTC_NUM];\
|
||||
unsigned int pm_gpio1_reg_save[PM_SCU_GPIO_SWPORTC_NUM];\
|
||||
unsigned int save[4];\
|
||||
unsigned int pm_scu_reg_ch[PM_SCU_REG_NUM];\
|
||||
unsigned int pm_cpu_reg_ch[PM_GENERAL_CPU_REG];\
|
||||
struct rk2818_pm_st pm_save={&pm_scu_reg_save[0],&pm_cpu_reg_save[0],&pm_gpio0_reg_save[0],&pm_gpio1_reg_save[0],&save[0]\
|
||||
,&pm_scu_reg_ch[0],&pm_cpu_reg_ch[0]\
|
||||
};\
|
||||
struct regulator *buck1
|
||||
|
||||
#endif
|
||||
static int __tcmfunc pm_set_gpio_pinstate(unsigned int gpio,unsigned int output,unsigned int level)
|
||||
{
|
||||
unsigned int *rk2818_gpio_reg;
|
||||
unsigned int regoff;
|
||||
|
||||
if(gpio>=RK2818GPIO_TOTAL)
|
||||
return -1;
|
||||
|
||||
if(gpio<32)
|
||||
rk2818_gpio_reg=(unsigned int *)RK2818_GPIO0_BASE;
|
||||
else
|
||||
{
|
||||
rk2818_gpio_reg=(unsigned int *)RK2818_GPIO1_BASE;
|
||||
gpio-=32;
|
||||
}
|
||||
|
||||
regoff=PM_GPIO_SWPORTA_DR+(gpio/8)*3;
|
||||
gpio%=8;
|
||||
|
||||
if(output)
|
||||
{
|
||||
rk2818_gpio_reg[regoff+1]|=(1<<gpio);//ddr set dir
|
||||
if(level==0)
|
||||
rk2818_gpio_reg[regoff]&=(~(1<<gpio));//ddr set value
|
||||
else
|
||||
rk2818_gpio_reg[regoff]|=(1<<gpio);
|
||||
}
|
||||
else
|
||||
rk2818_gpio_reg[regoff+1]&=(~(1<<gpio));//ddr set dir
|
||||
return 0;
|
||||
}
|
||||
static void __tcmfunc rk2818_pm_save_reg(unsigned int *save,unsigned int *source,int num)
|
||||
{
|
||||
int i;
|
||||
if(save&&source)
|
||||
for(i=0;i<num;i++)
|
||||
{
|
||||
save[i]=source[i];
|
||||
}
|
||||
|
||||
}
|
||||
static void __tcmfunc rk2818_pm_suspend_first(void)
|
||||
{
|
||||
unsigned int *rk2818_scu_reg=(unsigned int *)RK2818_SCU_BASE;
|
||||
unsigned int *rk2818_cpu_reg=(unsigned int *)RK2818_REGFILE_BASE;
|
||||
unsigned int *rk2818_gpio0_reg=(unsigned int *)RK2818_GPIO0_BASE;
|
||||
unsigned int *rk2818_gpio1_reg=(unsigned int *)RK2818_GPIO1_BASE;
|
||||
//unsigned int *rk2818_ddr_reg=(unsigned int *)RK2818_SDRAMC_BASE;
|
||||
|
||||
rk2818_pm_save_reg(pm_save.pm_scu_reg,rk2818_scu_reg,PM_SCU_REG_NUM);
|
||||
rk2818_pm_save_reg(pm_save.pm_cpu_reg,rk2818_cpu_reg,PM_GENERAL_CPU_REG);
|
||||
rk2818_pm_save_reg(pm_save.pm_gpio0_reg,rk2818_gpio0_reg,PM_SCU_GPIO_SWPORTC_NUM);
|
||||
rk2818_pm_save_reg(pm_save.pm_gpio1_reg,rk2818_gpio1_reg,PM_SCU_GPIO_SWPORTC_NUM);
|
||||
pm_save.scu_regbit=0;
|
||||
pm_save.cpu_regbit=0;
|
||||
pm_save.gpio0_regbit=0x6db;
|
||||
pm_save.gpio1_regbit=0x6db;
|
||||
//pm_save.savereg[0]=rk2818_ddr_reg[82];
|
||||
//rk2818_ddr_reg[82]=rk2818_ddr_reg[82]&(~(0xffff))&(~(0xf<<20));
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PC2,1,0);
|
||||
tcm_printascii("suspend frist\n");
|
||||
}
|
||||
|
||||
static void __tcmfunc rk2818_pm_resume_first(void)
|
||||
{
|
||||
//unsigned int *rk2818_ddr_reg=(unsigned int *)RK2818_SDRAMC_BASE;
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PC2,1,1);
|
||||
//rk2818_ddr_reg[82]=pm_save.savereg[0];
|
||||
}
|
||||
static void __tcmfunc rk2818_soc_scu_suspend(void)
|
||||
{
|
||||
|
||||
unsigned int *rk2818_scu_reg=(unsigned int *)RK2818_SCU_BASE;
|
||||
|
||||
pm_save.scu_regbit|=(0x1<<PM_SCU_CLKGATE0_CON);
|
||||
rk2818_scu_reg[PM_SCU_CLKGATE0_CON] = SCU_GATE0CLK_ALL_DIS&(~DIS_ARM_CLK)&(~DIS_TIMER_CLK)&(~DIS_GPIO0_CLK)&(~DIS_GPIO1_CLK)&(~DIS_INTC_CLK)&(~DIS_UART1_CLK);
|
||||
//&(~DIS_UART0_CLK)&(~DIS_UART1_CLK);
|
||||
|
||||
|
||||
pm_save.scu_regbit|=(0x1<<PM_SCU_CLKGATE1_CON);
|
||||
rk2818_scu_reg[PM_SCU_CLKGATE1_CON] =SCU_GATE1CLK_BASE_SET|EN_AXI_CLK/*&(~DIS_DDR_CLK)&(~DIS_DDR_HCLK)*/;
|
||||
|
||||
pm_save.scu_regbit|=(0x1<<PM_SCU_CLKGATE2_CON);
|
||||
rk2818_scu_reg[PM_SCU_CLKGATE2_CON] =SCU_GATE2CLK_BASE_SET&(~DIS_ITCMBUS_CLK)
|
||||
&(~DIS_DTCM0BUS_CLK)&(~DIS_DTCM1BUS_CLK);
|
||||
|
||||
//pm_save.scu_regbit|=(0x1<<PM_SCU_CLKSEL0_CON);
|
||||
//rk2818_scu_reg[PM_SCU_CLKSEL0_CON] |=(rk2818_scu_reg[PM_SCU_CLKSEL0_CON]&PM_BIT_CLEAR(CLKSEL0_HCLK,2)&PM_BIT_CLEAR(CLKSEL0_PCLK,2))
|
||||
// |CLKSEL0_HCLK21;
|
||||
|
||||
pm_save.scu_regbit|=(0x1<<PM_SCU_DPLL_CON);
|
||||
rk2818_scu_reg[PM_SCU_DPLL_CON] |= DSPPLL_POERDOWN; //dsp pll power down
|
||||
|
||||
pm_save.scu_regbit|=(0x1<<PM_SCU_CPLL_CON);
|
||||
rk2818_scu_reg[PM_SCU_CPLL_CON] |= CPLL_POERDOWN; //dsp pll power down
|
||||
|
||||
tcm_udelay(1, 24);
|
||||
//tcm_printascii("dsp pll power down\n");
|
||||
|
||||
pm_save.scu_regbit|=(0x1<<PM_SCU_PMU_CON);
|
||||
rk2818_scu_reg[PM_SCU_PMU_CON] |=LCDC_POWER_DOWN;
|
||||
rk2818_scu_reg[PM_SCU_PMU_CON] |=DSP_POWER_DOWN;
|
||||
|
||||
tcm_udelay(1, 24);
|
||||
//tcm_printascii("dsp power down\n");
|
||||
|
||||
pm_save.scu_regbit|=(0x1<<PM_CLKSEL2_CON);
|
||||
rk2818_scu_reg[PM_CLKSEL2_CON] =(rk2818_scu_reg[PM_CLKSEL2_CON]&(~0xf))|0x7;
|
||||
|
||||
pm_save.scu_regbit|=(0x1<<PM_SCU_MODE_CON);
|
||||
rk2818_scu_reg[PM_SCU_MODE_CON] &= CPU_SLOW_MODE; //cpu slow mode
|
||||
|
||||
pm_save.scu_regbit|=(0x1<<PM_SCU_APLL_CON);
|
||||
//rk2818_scu_reg[PM_SCU_APLL_CON] |= ARMPLL_BYPASSMODE;//enable arm pll bypass
|
||||
rk2818_scu_reg[PM_SCU_APLL_CON] |= ARMPLL_POERDOWN; //arm pll power down
|
||||
|
||||
//tcm_printascii("arm pll power down\n");
|
||||
|
||||
//rk2818_scu_reg[PM_SCU_PMU_CON] |=DDR_POWER_DOWN;
|
||||
//pm_save.scu_regbit|=(0x1<<PM_SCU_SOFTRST_CON);
|
||||
//rk2818_scu_reg[PM_SCU_SOFTRST_CON]|=RST_DDR_CORE_LOGIC;//RST_DDR_BUS/RST_DDR_CORE_LOGIC
|
||||
|
||||
#ifdef RK2818_MOBLIE_PM_PRT_CHANGED_REG
|
||||
rk2818_pm_save_reg(pm_save.pm_scu_reg_ch,rk2818_scu_reg,PM_SCU_REG_NUM);
|
||||
#endif
|
||||
}
|
||||
|
||||
/*static void __tcmfunc rk2818_soc_general_cpu_suspend(void)
|
||||
{
|
||||
|
||||
unsigned int *rk2818_cpu_reg=(unsigned int *)RK2818_REGFILE_BASE;
|
||||
//unsigned int *rk2818_gpio0_reg=(unsigned int *)RK2818_GPIO0_BASE;
|
||||
//unsigned int *rk2818_gpio1_reg=(unsigned int *)RK2818_GPIO1_BASE;
|
||||
|
||||
#if 0
|
||||
pm_save.cpu_regbit|=(0x1<<PM_GPIO0_AB_PU_CON);
|
||||
rk2818_cpu_reg[PM_GPIO0_AB_PU_CON] =GPIO0_AB_NORMAL|PMGPIO_DN(GPIO0_A3);
|
||||
|
||||
pm_save.cpu_regbit|=(0x1<<PM_GPIO0_CD_PU_CON);
|
||||
rk2818_cpu_reg[PM_GPIO0_CD_PU_CON] = GPIO0_CD_NORMAL;
|
||||
|
||||
pm_save.cpu_regbit|=(0x1<<PM_GPIO1_AB_PU_CON);
|
||||
rk2818_cpu_reg[PM_GPIO1_AB_PU_CON] = GPIO1_AB_NORMAL;
|
||||
|
||||
pm_save.cpu_regbit|=(0x1<<PM_GPIO1_CD_PU_CON);
|
||||
rk2818_cpu_reg[PM_GPIO1_CD_PU_CON] = GPIO1_CD_NORMAL;
|
||||
#endif
|
||||
|
||||
pm_save.cpu_regbit|=(0x1<<PM_IOMUX_A_CON);
|
||||
pm_save.cpu_regbit|=(0x1<<PM_IOMUX_B_CON);
|
||||
|
||||
#if 1 //set uart0 pin
|
||||
rk2818_cpu_reg[PM_IOMUX_A_CON] &=(~(0x3<<PM_UART0_OUT))&(~(0x3<<PM_UART0_IN));// 00 gpio 01uart
|
||||
rk2818_cpu_reg[PM_IOMUX_B_CON] &=(~(0x1<<PM_UART0_RTS))&(~(0x1<<PM_UART0_CTS));//
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PG0,0,0);//uart0 sin pin
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PG1,0,0);//uart0 sout pin
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PG0,0,0);//uart0 sin pin
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PG1,0,0);//uart0 sout pin
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PB2,0,0);//uart0 cts pin
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PB3,0,0);//uart0 rts pin
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PF7,0,0);//uart0 dtr pin
|
||||
//pm_set_gpio_pinstate(RK2818_PIN_PE0,0,0);//uart0 dsr pin
|
||||
#endif
|
||||
|
||||
#if 0 //set uart1 pin
|
||||
rk2818_cpu_reg[PM_IOMUX_A_CON] &=(~(0x3<<PM_UART1_OUT))&(~(0x3<<PM_UART1_IN));// 00 gpio 01uart
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PF0,0,0);//uart0 sin pin
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PG1,0,0);//uart0 sout pin
|
||||
#endif
|
||||
|
||||
#if 0 //set i2c0 pin
|
||||
rk2818_cpu_reg[PM_IOMUX_A_CON] |=(0x1<<PM_I2C0);// 1 gpio;0 i2c
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PE4,0,0);//sda pin
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PE5,0,0);//scl dsr pin
|
||||
#endif
|
||||
|
||||
#if 0 //set i2c1 pin
|
||||
rk2818_cpu_reg[PM_IOMUX_A_CON] &=(~(0x3<<PM_I2C1));// 1 gpio;0 i2c
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PE6,0,0);//sda pin
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PE7,0,0);//scl dsr pin
|
||||
#endif
|
||||
|
||||
#if 1 // sdio0
|
||||
rk2818_cpu_reg[PM_IOMUX_A_CON] &=(~(0x1<<PM_SDIO0_CMD))&(~(0x1<<PM_SDIO0_DATA));// 1 gpio;0 i2c
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PH0,0,0);
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PH1,0,0);
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PH2,0,0);
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PH3,0,0);
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PH4,0,0);
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PH5,0,0);
|
||||
//pm_set_gpio_pinstate(RK2818_PIN_PF3,0,0);
|
||||
#endif
|
||||
|
||||
#if 0 // sdio1
|
||||
rk2818_cpu_reg[PM_IOMUX_A_CON] &=(~(0x1<<PM_SDIO1_CMD))&(~(0x1<<PM_SDIO1_DATA));// 1 gpio;0 i2c
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PG2,0,0);
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PG3,0,0);
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PG4,0,0);
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PG5,0,0);
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PG6,0,0);
|
||||
pm_set_gpio_pinstate(RK2818_PIN_PG7,0,0);
|
||||
#endif
|
||||
|
||||
#ifdef RK2818_MOBLIE_PM_PRT_CHANGED_REG
|
||||
rk2818_pm_save_reg(pm_save.pm_cpu_reg_ch,rk2818_cpu_reg,PM_GENERAL_CPU_REG);
|
||||
rk2818_pm_save_reg(pm_save.pm_gpio0_reg_ch,rk2818_gpio0_reg,PM_SCU_GPIO_SWPORTC_NUM);
|
||||
rk2818_pm_save_reg(pm_save.pm_gpio1_reg_ch,rk2818_gpio1_reg,PM_SCU_GPIO_SWPORTC_NUM);
|
||||
#endif
|
||||
|
||||
}*/
|
||||
|
||||
static void __tcmfunc rk2818_soc_resume(unsigned int *pm_save_reg,unsigned int *base_add,u16 regbit,int num)
|
||||
{
|
||||
int i;
|
||||
tcm_printascii("rk2818_soc_resume\n");
|
||||
for(i=0;i<num;i++)
|
||||
{
|
||||
if((regbit>>i)&0x0001)
|
||||
base_add[i]=pm_save_reg[i];
|
||||
}
|
||||
}
|
||||
static void __tcmfunc rk2818_pm_soc_suspend(void)
|
||||
{
|
||||
rk2818_soc_scu_suspend( );
|
||||
//rk2818_soc_general_cpu_suspend( );
|
||||
}
|
||||
static void __tcmfunc rk2818_pm_soc_resume(void)
|
||||
{
|
||||
rk2818_soc_resume(pm_save.pm_scu_reg,(unsigned int *)RK2818_SCU_BASE,pm_save.scu_regbit,PM_SCU_REG_NUM);
|
||||
//rk2818_soc_resume(pm_save.pm_cpu_reg,(unsigned int *)RK2818_REGFILE_BASE,pm_save.cpu_regbit,PM_GENERAL_CPU_REG);
|
||||
}
|
||||
|
||||
/*void rk2818_pm_print(void)
|
||||
{
|
||||
//rk2818_pm_reg_print(pm_save.pm_scu_reg,pm_save.pm_scu_reg_ch,PM_SCU_REG_NUM,"scu");
|
||||
//rk2818_pm_reg_print(pm_save.pm_cpu_reg,pm_save.pm_cpu_reg,PM_GENERAL_CPU_REG,"general_cpu");
|
||||
//rk2818_pm_reg_print(pm_save.pm_gpio0_reg,pm_save.pm_gpio0_reg,PM_SCU_GPIO_SWPORTC_NUM,"gpio0");
|
||||
}
|
||||
|
||||
static void rk2818_pm_reg_print(unsigned int *pm_save_reg,unsigned int *pm_ch_reg,int num,char *name)
|
||||
{
|
||||
int i;
|
||||
|
||||
#ifdef RK2818_MOBLIE_PM_PRT_ORIGINAL_REG
|
||||
printk("***the follow inf is %s original reg***\n",name);
|
||||
for(i=0;i<num;i++)
|
||||
{
|
||||
printk(" %d,%x",i,pm_save_reg[i]);
|
||||
}
|
||||
printk("\n");
|
||||
#endif
|
||||
|
||||
#ifdef RK2818_MOBLIE_PM_PRT_CHANGED_REG
|
||||
printk("***the follow inf is %s changed reg***\n",name);
|
||||
for(i=0;i<num;i++)
|
||||
{
|
||||
printk(" %d,%x",i,pm_ch_reg[i]);
|
||||
}
|
||||
printk("\n");
|
||||
#endif
|
||||
}*/
|
||||
|
||||
#else
|
||||
#define rk2818_pm_suspend_first(a)
|
||||
#define rk2818_pm_resume_first(b)
|
||||
#define rk2818_pm_soc_suspend(a)
|
||||
#define rk2818_pm_soc_resume(a)
|
||||
#define rk2818_define_value
|
||||
|
||||
#endif
|
||||
|
||||
static void pmu_suspend(void)
|
||||
{
|
||||
//struct regulator *ldo1,*ldo2,*ldo4,*ldo5;
|
||||
struct regulator *lilo1,*lilo2;
|
||||
|
||||
/*ldo1 = regulator_get(NULL, "ldo1");
|
||||
regulator_disable(ldo1);
|
||||
ldo2 = regulator_get(NULL, "ldo2");
|
||||
regulator_disable(ldo2);
|
||||
ldo4 = regulator_get(NULL, "ldo4");
|
||||
regulator_disable(ldo4);
|
||||
ldo5 = regulator_get(NULL, "ldo5");
|
||||
regulator_disable(ldo5);
|
||||
lilo2 = regulator_get(NULL, "lilo2");
|
||||
regulator_disable(lilo2);*/
|
||||
|
||||
lilo1 = regulator_get(NULL, "lilo1");
|
||||
regulator_set_voltage(lilo1,2800000,2800000);
|
||||
lilo2 = regulator_get(NULL, "lilo2");
|
||||
regulator_set_voltage(lilo2,2800000,2800000);
|
||||
}
|
||||
|
||||
static void pmu_resume(void)
|
||||
{
|
||||
//struct regulator *ldo1,*ldo2,*ldo4,*ldo5;
|
||||
struct regulator *lilo1,*lilo2;
|
||||
//int tmp = 0;
|
||||
|
||||
/*ldo1 = regulator_get(NULL, "ldo1");
|
||||
regulator_enable(ldo1);
|
||||
tmp = regulator_get_voltage(ldo1);
|
||||
|
||||
ldo2 = regulator_get(NULL, "ldo2");
|
||||
regulator_enable(ldo2);
|
||||
tmp = regulator_get_voltage(ldo2);
|
||||
|
||||
ldo4 = regulator_get(NULL, "ldo4");
|
||||
regulator_enable(ldo4);
|
||||
tmp = regulator_get_voltage(ldo4);
|
||||
|
||||
ldo5 = regulator_get(NULL, "ldo5");
|
||||
regulator_enable(ldo5);
|
||||
tmp = regulator_get_voltage(ldo5);
|
||||
|
||||
lilo2 = regulator_get(NULL, "lilo2");
|
||||
regulator_enable(lilo2);
|
||||
tmp = regulator_get_voltage(lilo2);*/
|
||||
|
||||
lilo1 = regulator_get(NULL, "lilo1");
|
||||
regulator_set_voltage(lilo1,3000000,3000000);
|
||||
lilo2 = regulator_get(NULL, "lilo2");
|
||||
regulator_set_voltage(lilo2,3000000,3000000);
|
||||
}
|
||||
|
||||
static int __tcmfunc rk2818_tcm_idle(void)
|
||||
{
|
||||
//rk2818_define_value;
|
||||
volatile u32 unit;
|
||||
u32 ctrl_reg_62;
|
||||
|
||||
@@ -609,12 +208,9 @@ static int __tcmfunc rk2818_tcm_idle(void)
|
||||
asm("b 1f; .align 5; 1:");
|
||||
asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
|
||||
|
||||
|
||||
scu_writel(scu_mode & ~(3 << 2), SCU_MODE_CON); // slow
|
||||
scu_writel(scu_apll | PLL_PD, SCU_APLL_CON); // powerdown
|
||||
|
||||
|
||||
//tcm_printascii("3x pm ddr refresh\n");
|
||||
//rk28_ddr_enter_self_refresh();
|
||||
tcm_udelay(5, 24); //DRVDelayUs(100);
|
||||
ctrl_reg_62=sdram_enter_self_refresh();
|
||||
@@ -627,34 +223,27 @@ static int __tcmfunc rk2818_tcm_idle(void)
|
||||
asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
|
||||
|
||||
tcm_udelay(1, 24); //DRVDelayUs(100);
|
||||
rk2818_socpm_resume_first();
|
||||
rk2818_socpm_resume();
|
||||
rk2818_socpm_resume_last();
|
||||
tcm_udelay(1, 24); //DRVDelayUs(100);
|
||||
sdram_exit_self_refresh(ctrl_reg_62);
|
||||
//rk28_ddr_exit_self_refresh();
|
||||
//tcm_printascii("3x pm re\n");
|
||||
|
||||
tcm_udelay(10, 24);
|
||||
scu_writel(scu_apll, SCU_APLL_CON); // powerup
|
||||
scu_writel(scu_clksel0 & (~3), SCU_CLKSEL0_CON);
|
||||
tcm_udelay(20, 24);
|
||||
//tcm_printascii("3x pm re1\n");
|
||||
|
||||
unit = 7200; /* 24m,0.3ms , 24*300*/
|
||||
while (unit-- > 0) {
|
||||
if (regfile_readl(CPU_APB_REG0) & 0x80)
|
||||
break;
|
||||
}
|
||||
///tcm_printascii("3x pm re2\n");
|
||||
|
||||
tcm_udelay(5 << 8, 24);
|
||||
scu_writel(scu_clksel0, SCU_CLKSEL0_CON);
|
||||
tcm_udelay(5, 24);
|
||||
//tcm_printascii("3x pm re3\n");
|
||||
|
||||
scu_writel(scu_mode, SCU_MODE_CON); // normal
|
||||
|
||||
//tcm_printascii("3x pm re4\n");
|
||||
|
||||
return unit;
|
||||
}
|
||||
|
||||
@@ -667,9 +256,6 @@ static void rk2818_idle(void)
|
||||
asm volatile ("mov sp, %0" :: "r" (tcm_sp));
|
||||
rk2818_tcm_idle();
|
||||
asm volatile ("mov sp, %0" :: "r" (old_sp));
|
||||
|
||||
//printk("rk2818_idle\n");
|
||||
|
||||
}
|
||||
|
||||
#if 1
|
||||
@@ -705,11 +291,6 @@ static int rk2818_pm_enter(suspend_state_t state)
|
||||
struct clk *arm_clk = clk_get(NULL, "arm");
|
||||
unsigned long arm_rate = clk_get_rate(arm_clk);
|
||||
|
||||
printk(KERN_DEBUG "before core halt\n");
|
||||
|
||||
#if defined(CONFIG_MACH_RAHO)||defined(CONFIG_MACH_RAHOSDK)
|
||||
pmu_suspend( );
|
||||
#endif
|
||||
clk_set_rate(arm_clk, 24000000);
|
||||
dump_register();
|
||||
|
||||
@@ -733,9 +314,6 @@ static int rk2818_pm_enter(suspend_state_t state)
|
||||
|
||||
rockchip_timer_clocksource_suspend_resume(0);
|
||||
#endif
|
||||
#if defined(CONFIG_MACH_RAHO)||defined(CONFIG_MACH_RAHOSDK)
|
||||
pmu_resume( );
|
||||
#endif
|
||||
dump_register();
|
||||
clk_set_rate(arm_clk, arm_rate);
|
||||
//rk2818_socpm_print();
|
||||
|
||||
@@ -74,8 +74,6 @@ static struct rk2818_pm_soc_st __tcmdata pm_general_ctr={
|
||||
|
||||
static unsigned int __tcmdata pm_gpio0_reg_save[PM_SCU_GPIO_SWPORTC_NUM];
|
||||
|
||||
|
||||
|
||||
static struct rk2818_pm_soc_st __tcmdata pm_gpio0_ctr={
|
||||
.reg_save=&pm_gpio0_reg_save[0],
|
||||
.reg_base_addr=(unsigned int *)RK2818_GPIO0_BASE,
|
||||
@@ -120,12 +118,10 @@ struct rk2818_pm_st __tcmdata rk2818_soc_pm={
|
||||
.gpio1=(struct rk2818_pm_soc_st *)&pm_gpio1_ctr.reg_save,
|
||||
.save_reg=&pm_savereg[0],
|
||||
.save_ch=&savereg_ch[0],
|
||||
.scu_suspend=NULL,
|
||||
.general_reg_suspend=NULL,
|
||||
.set_suspendvol=NULL,
|
||||
.resume_vol=NULL,
|
||||
};
|
||||
|
||||
static struct rk2818_pm_callback_st __tcmdata *pm_ctr_callback=NULL;
|
||||
|
||||
int __tcmfunc rk2818_socpm_set_gpio(unsigned int gpio,unsigned int output,unsigned int level)
|
||||
{
|
||||
unsigned int *rk2818_gpio_reg;
|
||||
@@ -245,9 +241,9 @@ static void __tcmfunc rk2818_pm_save_reg(unsigned int *save,unsigned int *source
|
||||
static void __tcmfunc rk2818_soc_updata_scureg(unsigned int *tempdata,int regoff,int flag)
|
||||
{
|
||||
|
||||
if(rk2818_soc_pm.scu_suspend&&flag)
|
||||
if(pm_ctr_callback->scu_suspend&&flag)
|
||||
{
|
||||
rk2818_soc_pm.scu_suspend(tempdata,regoff);
|
||||
pm_ctr_callback->scu_suspend(tempdata,regoff);
|
||||
}
|
||||
rk2818_soc_pm.scu->reg_base_addr[regoff]=*tempdata;
|
||||
rk2818_soc_pm.scu->reg_ctrbit|=(0x1<<regoff);
|
||||
@@ -278,7 +274,6 @@ static void __tcmfunc rk2818_soc_scu_suspend(void)
|
||||
rk2818_soc_updata_scureg(tempdata,PM_SCU_CLKGATE1_CON,1);
|
||||
tcm_udelay(1, 24);
|
||||
|
||||
|
||||
*tempdata=SCU_GATE2CLK_BASE_SET&(~DIS_ITCMBUS_CLK)&(~DIS_DTCM0BUS_CLK)&(~DIS_DTCM1BUS_CLK);
|
||||
rk2818_soc_updata_scureg(tempdata,PM_SCU_CLKGATE2_CON,1);
|
||||
tcm_udelay(1, 24);
|
||||
@@ -290,14 +285,11 @@ static void __tcmfunc rk2818_soc_scu_suspend(void)
|
||||
*tempdata=rk2818_scu_reg[PM_SCU_CPLL_CON] |CPLL_POERDOWN; //dsp pll power down
|
||||
rk2818_soc_updata_scureg(tempdata,PM_SCU_CPLL_CON,1);
|
||||
tcm_udelay(1, 24);
|
||||
|
||||
|
||||
|
||||
rk2818_scu_reg[PM_SCU_PMU_CON] |=LCDC_POWER_DOWN;
|
||||
*tempdata=rk2818_scu_reg[PM_SCU_PMU_CON] |DSP_POWER_DOWN;
|
||||
rk2818_soc_updata_scureg(tempdata,PM_SCU_PMU_CON,1);
|
||||
|
||||
|
||||
|
||||
*tempdata=rk2818_scu_reg[PM_SCU_MODE_CON] &CPU_SLOW_MODE; //general slow mode
|
||||
rk2818_soc_updata_scureg(tempdata,PM_SCU_MODE_CON,1);
|
||||
|
||||
@@ -311,7 +303,6 @@ static void __tcmfunc rk2818_soc_scu_suspend(void)
|
||||
rk2818_soc_updata_scureg(tempdata,PM_SCU_CLKSEL0_CON,1);
|
||||
tcm_udelay(2, 24);
|
||||
|
||||
|
||||
*tempdata=(rk2818_scu_reg[PM_CLKSEL2_CON]&(~0xf))|0xF;
|
||||
rk2818_soc_updata_scureg(tempdata,PM_CLKSEL2_CON,1);
|
||||
|
||||
@@ -320,7 +311,6 @@ static void __tcmfunc rk2818_soc_scu_suspend(void)
|
||||
//*tempdata=rk2818_scu_reg[PM_SCU_PMU_CON] |DDR_POWER_DOWN;
|
||||
//rk2818_soc_updata_scureg(tempdata,PM_SCU_PMU_CON,0);
|
||||
|
||||
|
||||
//*tempdata=rk2818_scu_reg[PM_SCU_SOFTRST_CON]|(1<<RST_DDR_BUS)|(1<<RST_DDR_CORE_LOGIC);//RST_ALL&(~(1<<RST_ARM));
|
||||
//rk2818_soc_updata_scureg(tempdata,PM_SCU_SOFTRST_CON,1);
|
||||
}
|
||||
@@ -408,9 +398,9 @@ void __tcmfunc rk2818_socpm_suspend(void)
|
||||
rk2818_soc_scu_suspend();
|
||||
tcm_udelay(1, 24); //DRVDelayUs(100);
|
||||
|
||||
if(rk2818_soc_pm.general_reg_suspend)
|
||||
if(pm_ctr_callback&&pm_ctr_callback->general_reg_suspend)
|
||||
{
|
||||
rk2818_soc_pm.general_reg_suspend();
|
||||
pm_ctr_callback->general_reg_suspend();
|
||||
}
|
||||
#ifdef RK2818_PM_PRT_CHANGED_REG
|
||||
|
||||
@@ -435,7 +425,7 @@ void __tcmfunc rk2818_socpm_resume(void)
|
||||
rk2818_soc_resume(rk2818_soc_pm.scu->reg_save,rk2818_soc_pm.scu->reg_base_addr,
|
||||
rk2818_soc_pm.scu->reg_ctrbit,rk2818_soc_pm.scu->reg_num);
|
||||
tcm_udelay(2, 24);
|
||||
if(rk2818_soc_pm.general_reg_suspend)
|
||||
if(pm_ctr_callback->general_reg_suspend)
|
||||
{
|
||||
|
||||
rk2818_soc_resume(rk2818_soc_pm.general->reg_save,rk2818_soc_pm.general->reg_base_addr,
|
||||
@@ -463,26 +453,25 @@ void __tcmfunc rk2818_socpm_suspend_first(void)
|
||||
rk2818_soc_pm.general->reg_ctrbit=0;
|
||||
rk2818_soc_pm.gpio0->reg_ctrbit=0x6db;
|
||||
rk2818_soc_pm.gpio1->reg_ctrbit=0x6db;
|
||||
rk2818_socpm_set_gpio(RK2818_PIN_PC2,1,0);
|
||||
|
||||
//rk2818_soc_pm.save_reg[0]=rk2818_ddr_reg[82];
|
||||
//rk2818_ddr_reg[82]=rk2818_ddr_reg[82]&(~(0xffff))&(~(0xf<<20));
|
||||
|
||||
if(rk2818_soc_pm.set_suspendvol)
|
||||
rk2818_soc_pm.set_suspendvol();
|
||||
if(pm_ctr_callback&&pm_ctr_callback->set_pin)
|
||||
pm_ctr_callback->set_pin();
|
||||
|
||||
|
||||
}
|
||||
|
||||
void __tcmfunc rk2818_socpm_resume_first(void)
|
||||
void __tcmfunc rk2818_socpm_resume_last(void)
|
||||
{
|
||||
//unsigned int *rk2818_ddr_reg=(unsigned int *)RK2818_SDRAMC_BASE;
|
||||
rk2818_socpm_set_gpio(RK2818_PIN_PC2,1,1);
|
||||
if(rk2818_soc_pm.resume_vol)
|
||||
rk2818_soc_pm.resume_vol();
|
||||
|
||||
if(pm_ctr_callback&&pm_ctr_callback->resume_pin)
|
||||
pm_ctr_callback->resume_pin();
|
||||
|
||||
}
|
||||
|
||||
|
||||
void rk2818_socpm_print(void)
|
||||
{
|
||||
rk2818_pm_reg_print(rk2818_soc_pm.scu->reg_save,rk2818_soc_pm.scu->reg_ch,
|
||||
@@ -496,22 +485,16 @@ void rk2818_socpm_print(void)
|
||||
}
|
||||
|
||||
|
||||
|
||||
void rk2818_socpm_int(pm_scu_suspend scu,pm_general_reg_suspend general,
|
||||
pm_set_suspendvol setvol,pm_resume_vol resumevol)
|
||||
int rk2818_socpm_init(struct rk2818_pm_callback_st *call_back)
|
||||
{
|
||||
rk2818_soc_pm.scu_suspend=scu;
|
||||
rk2818_soc_pm.general_reg_suspend=general;
|
||||
rk2818_soc_pm.set_suspendvol=setvol;
|
||||
rk2818_soc_pm.resume_vol=resumevol;
|
||||
if(call_back==NULL)
|
||||
return -1;
|
||||
pm_ctr_callback = call_back;
|
||||
return 0;
|
||||
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#if defined (CONFIG_RK2818_SOC_PM_DBG)
|
||||
|
||||
static bool check_attr_dbg_value(struct rk2818_pm_attr_dbg_st *attr)
|
||||
|
||||
@@ -685,6 +685,16 @@ static int spi_fpga_wait_suspend(struct spi_fpga_port *port)
|
||||
|
||||
static void fpga_close_power_support(void)
|
||||
{
|
||||
//modem
|
||||
#if 0
|
||||
gpio_request(FPGA_PIO2_03, NULL);
|
||||
gpio_direction_output(FPGA_PIO2_03,GPIO_LOW);
|
||||
gpio_free(FPGA_PIO2_03);
|
||||
gpio_request(FPGA_PIO2_05, NULL);
|
||||
gpio_direction_output(FPGA_PIO2_05,GPIO_HIGH);
|
||||
gpio_free(FPGA_PIO2_05);
|
||||
#endif
|
||||
|
||||
//cmmb power down
|
||||
gpio_request(FPGA_PIO4_03, NULL);
|
||||
gpio_direction_output(FPGA_PIO4_03,GPIO_LOW);
|
||||
@@ -704,6 +714,16 @@ static void fpga_close_power_support(void)
|
||||
|
||||
static void fpga_open_power_support(void)
|
||||
{
|
||||
//modem
|
||||
#if 0
|
||||
gpio_request(FPGA_PIO2_03, NULL);
|
||||
gpio_direction_output(FPGA_PIO2_03,GPIO_HIGH);
|
||||
gpio_free(FPGA_PIO2_03);
|
||||
gpio_request(FPGA_PIO2_05, NULL);
|
||||
gpio_direction_output(FPGA_PIO2_05,GPIO_LOW);
|
||||
gpio_free(FPGA_PIO2_05);
|
||||
#endif
|
||||
|
||||
//cmmb do not control here
|
||||
|
||||
//KEY LED resume
|
||||
@@ -712,6 +732,7 @@ static void fpga_open_power_support(void)
|
||||
gpio_free(FPGA_PIO1_13);
|
||||
}
|
||||
|
||||
|
||||
static int spi_fpga_suspend(struct spi_device *spi, pm_message_t state)
|
||||
{
|
||||
|
||||
|
||||
Reference in New Issue
Block a user