mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-08 20:07:46 +09:00
ARM64: dts: rk3368: add rk3368-p9.dts for p9 board
Change-Id: Id7e718b4f670aa91768db695e5c38da88f048987 Signed-off-by: Zorro Liu <lyx@rock-chips.com> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
This commit is contained in:
Zorro Liu
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3366-fpga.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3366-tb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-p9.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-sheep.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-box-808-android-6.0.dtb
|
||||
|
||||
657
arch/arm64/boot/dts/rockchip/rk3368-p9.dts
Normal file
657
arch/arm64/boot/dts/rockchip/rk3368-p9.dts
Normal file
@@ -0,0 +1,657 @@
|
||||
/*
|
||||
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3368.dtsi"
|
||||
#include "rk3368-android.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip rk3368 p9 board";
|
||||
compatible = "rockchip,p9", "rockchip,rk3368";
|
||||
|
||||
es8316-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "rockchip,es8316-codec";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Mic Jack",
|
||||
"Headphone", "Headphone Jack";
|
||||
simple-audio-card,routing =
|
||||
"Mic Jack", "MICBIAS1",
|
||||
"IN1P", "Mic Jack",
|
||||
"Headphone Jack", "HPOL",
|
||||
"Headphone Jack", "HPOR";
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s_8ch>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&es8316>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_sound: hdmi-sound {
|
||||
status = "okay";
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,name = "rockchip,hdmi";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s_8ch>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk818 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm0 0 25000 PWM_POLARITY_INVERTED>;
|
||||
brightness-levels = <
|
||||
0 1 2 3 4 5 6 7
|
||||
8 9 10 11 12 13 14 15
|
||||
16 17 18 19 20 21 22 23
|
||||
24 25 26 27 28 29 30 31
|
||||
32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47
|
||||
48 49 50 51 52 53 54 55
|
||||
56 57 58 59 60 61 62 63
|
||||
64 65 66 67 68 69 70 71
|
||||
72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87
|
||||
88 89 90 91 92 93 94 95
|
||||
96 97 98 99 100 101 102 103
|
||||
104 105 106 107 108 109 110 111
|
||||
112 113 114 115 116 117 118 119
|
||||
120 121 122 123 124 125 126 127
|
||||
128 129 130 131 132 133 134 135
|
||||
136 137 138 139 140 141 142 143
|
||||
144 145 146 147 148 149 150 151
|
||||
152 153 154 155 156 157 158 159
|
||||
160 161 162 163 164 165 166 167
|
||||
168 169 170 171 172 173 174 175
|
||||
176 177 178 179 180 181 182 183
|
||||
184 185 186 187 188 189 190 191
|
||||
192 193 194 195 196 197 198 199
|
||||
200 201 202 203 204 205 206 207
|
||||
208 209 210 211 212 213 214 215
|
||||
216 217 218 219 220 221 222 223
|
||||
224 225 226 227 228 229 230 231
|
||||
232 233 234 235 236 237 238 239
|
||||
240 241 242 243 244 245 246 247
|
||||
248 249 250 251 252 253 254 255>;
|
||||
default-brightness-level = <200>;
|
||||
enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
rk_key: rockchip-key {
|
||||
compatible = "rockchip,key";
|
||||
status = "okay";
|
||||
|
||||
io-channels = <&saradc 1>;
|
||||
|
||||
vol-up-key {
|
||||
linux,code = <115>;
|
||||
label = "volume up";
|
||||
rockchip,adc_value = <1>;
|
||||
};
|
||||
|
||||
vol-down-key {
|
||||
linux,code = <114>;
|
||||
label = "volume down";
|
||||
rockchip,adc_value = <170>;
|
||||
};
|
||||
|
||||
power-key {
|
||||
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <116>;
|
||||
label = "power";
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
/* wifi_chip_type - wifi chip define
|
||||
* ap6210, ap6330, ap6335
|
||||
* rtl8188eu, rtl8723bs, rtl8723bu
|
||||
* esp8089
|
||||
*/
|
||||
wifi_chip_type = "ap6210";
|
||||
sdio_vref = <1800>; //1800mv or 3300mv
|
||||
WIFI,host_wake_irq = <&gpio3 6 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
clocks = <&rk818 1>;
|
||||
clock-names = "ext_clock";
|
||||
uart_rts_gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default","rts_gpio";
|
||||
pinctrl-0 = <&uart0_rts>;
|
||||
pinctrl-1 = <&uart0_rts_gpio>;
|
||||
|
||||
//BT,power_gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
|
||||
BT,reset_gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio3 7 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3800000>;
|
||||
regulator-max-microvolt = <3800000>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&syr827>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
logic-supply = <&vdd_logic>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
supports-emmc;
|
||||
disable-wp;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
clock-frequency = <37500000>;
|
||||
clock-freq-min-max = <400000 37500000>;
|
||||
supports-sd;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
card-detect-delay = <200>;
|
||||
disable-wp;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
clock-frequency = <50000000>;
|
||||
clock-freq-min-max = <200000 50000000>;
|
||||
supports-sdio;
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
syr827: syr827@40 {
|
||||
compatible = "silergy,syr827";
|
||||
status = "okay";
|
||||
reg = <0x40>;
|
||||
|
||||
regulator-compatible = "fan53555-reg";
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-state = <3>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
rk818: pmic@1c {
|
||||
compatible = "rockchip,rk818";
|
||||
status = "okay";
|
||||
reg = <0x1c>;
|
||||
clock-output-names = "xin32k", "wifibt_32kin";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
vcc7-supply = <&vcc_sys>;
|
||||
vcc8-supply = <&vcc_sys>;
|
||||
vcc9-supply = <&vcc_io>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_io: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_io";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_codec: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcca_codec";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_tp: LDO_REG2 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc_tp";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_10: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vdd_10";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc18_lcd: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc18_lcd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_pmu: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vccio_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd10_lcd: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vdd10_lcd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_18: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_18";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_wl: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_wl";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: SWITCH_REG {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
battery {
|
||||
compatible = "rk818-battery";
|
||||
ocv_table = <
|
||||
3400 3650 3693 3707 3731 3749 3760
|
||||
3770 3782 3796 3812 3829 3852 3882
|
||||
3915 3951 3981 4047 4086 4132 4182>;
|
||||
design_capacity = <8650>;
|
||||
design_qmax = <8800>;
|
||||
bat_res = <85>;
|
||||
max_input_current = <2000>;
|
||||
max_chrg_current = <1800>;
|
||||
max_chrg_voltage = <4200>;
|
||||
sleep_enter_current = <600>;
|
||||
sleep_exit_current = <600>;
|
||||
power_off_thresd = <3400>;
|
||||
zero_algorithm_vol = <3850>;
|
||||
fb_temperature = <115>;
|
||||
sample_res = <10>;
|
||||
max_soc_offset = <60>;
|
||||
energy_mode = <0>;
|
||||
monitor_sec = <5>;
|
||||
virtual_power = <0>;
|
||||
power_dc2otg = <1>;
|
||||
support_usb_adp = <1>;
|
||||
support_dc_adp = <1>;
|
||||
dc_det_gpio = <&gpio0 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
es8316: es8316@10 {
|
||||
status = "okay";
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "everest,es8316";
|
||||
reg = <0x10>;
|
||||
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
||||
clock-names = "mclk";
|
||||
spk-con-gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>;
|
||||
hp-det-gpio = <&gpio0 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
gt9xx: gt9xx@14 {
|
||||
compatible = "goodix,gt9xx";
|
||||
reg = <0x14>;
|
||||
touch-gpio = <&gpio0 12 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
|
||||
max-x = <1920>;
|
||||
max-y = <1200>;
|
||||
tp-size = <89>;
|
||||
status = "okay";
|
||||
tp-supply = <&vcc_tp>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
mpu6500@68 {
|
||||
status = "okay";
|
||||
compatible = "invensense,mpu6500";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mpu6500_irq_gpio>;
|
||||
reg = <0x68>;
|
||||
irq-gpio = <&gpio3 14 IRQ_TYPE_EDGE_RISING>;
|
||||
mpu-int_config = <0x10>;
|
||||
mpu-level_shifter = <0>;
|
||||
mpu-orientation = <1 0 0 0 1 0 0 0 1>;
|
||||
orientation-x= <1>;
|
||||
orientation-y= <0>;
|
||||
orientation-z= <1>;
|
||||
support-hw-poweroff = <1>;
|
||||
mpu-debug = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s_8ch {
|
||||
status = "okay";
|
||||
rockchip,i2s-broken-burst-len;
|
||||
rockchip,playback-channels = <8>;
|
||||
rockchip,capture-channels = <2>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
dvp-supply = <&vcc_18>;
|
||||
audio-supply = <&vcc_io>;
|
||||
gpio30-supply = <&vcc_io>;
|
||||
gpio1830-supply = <&vcc_io>;
|
||||
sdcard-supply = <&vccio_sd>;
|
||||
wifi-supply = <&vccio_wl>;
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
|
||||
pmu-supply = <&vccio_pmu>;
|
||||
vop-supply = <&vccio_pmu>;
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
mpu6500 {
|
||||
mpu6500_irq_gpio: mpu6500-irq-gpio {
|
||||
rockchip,pins = <3 14 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart0_rts_gpio: uart0-rts-gpio {
|
||||
rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user