shinys000114/linux
1
0
Fork 0
mirror of https://github.com/hardkernel/linux.git synced 2026-06-09 04:10:18 +09:00
Code Issues Packages Projects Releases Wiki Activity

UPSTREAM: ARM: dts: rockchip: add the sdio power sequence for kylin board

Browse Source 
This patch adds the sdio power sequence for kylin board.
The WLAN attached to a SDIO interface, wifi/bluetooth have
reset and power been needed to enable.

AFAIK, the simple power sequence provider sets a value for multiple GPIOs.
So the reset and power of WlAN chip can be handled in mmc power sequence.
On the module itself this is one of these, that should can be handled
by reset GPIOs in simple mmc power sequence.

The Bluetooth host wake is high active from bootup, this patch is also
set pinctrl bias as the default to enable the pull up in soc internal.

Change-Id: I422b0d2de86460c05239f1864322986abec59073
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from git.kernel.org next/linux-next.git master
 commit 4a9d0b0337)
This commit is contained in:
Caesar Wang
2016-01-15 21:49:53 +08:00
parent 9dd1231ecd
commit 5f7735c704
1 changed files with 24 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

24
arch/arm/boot/dts/rk3036-kylin.dts
View File

@@ -46,6 +46,23 @@
model = "Rockchip RK3036 KylinBoard";
compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&bt_wake_h>;
/*
* On the module itself this is one of these (depending
* on the actual card populated):
* - SDIO_RESET_L_WL_REG_ON
* - SDIO_RESET_L_WL_RST
* - SDIO_RESET_L_BT_EN
*/
reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
<&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */
<&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -303,6 +320,7 @@
cap-sdio-irq;
default-sample-phase = <90>;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
num-slots = <1>;
pinctrl-names = "default";
@@ -336,6 +354,12 @@
};
};
sdio {
bt_wake_h: bt-wake-h {
rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
sleep {
global_pwroff: global-pwroff {
rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;