mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-10 04:48:04 +09:00
Merge tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.5 This introduces the RDP442 and RDP433 reference devices on IPQ5332 and IPQ9574, respectively. RDP418, RDP433, RDP449 and RDP453 on the IPQ9574 are added. On MSM8939 the Square T2 board and the Sony Xperia M4 Aqua is added. Support for Acer Apire 1, built on the Snapdragon 7c platform is introduced. Fxtec Pro1X on SM6115 is added. Lastly long floating support for SC8180X and the Lenovo Flex 5G, and the Primus reference device, has been added. On IPQ5332 and IPQ6018 QFPROM support is introduced, and as described above the RDP442 board on the prior. Download mode support and various reserved-memory regions are also introduced on IPQ6018. IPQ8074 gains another SPI controller. On IPQ9574 CPU frequency scaling, low speed busses, RNG, Watchdog, qfprom, SMEM and RPM are introduced. As are support for four new board, mentioned above. MSM8916 gains a range of structural improvements, to better suite the various boards supported. Regulator constraints are corrected and their states are adjusted to match reality (e.g. always-on regulators marked as always-on). BQ Aquaris X5 gains support for front flash LED. As mentioned above, MSM8939 support is introduced with support for boards from Sony and Square. MSM8953 gains DMA support in I2C masters. MSM8996-based Sony Xperia boards gains description of their RGB notification LED. On SA8775P support for UFS, USB, GPU clock and iommu controllers, PMU, AOSS, watchdog and missing low-speed controllers are added. On the Ride platform UFS, USB and an i2c bus are enabled. iommu properties are added to QSPI on both SC7180 and SC7280. LPASS clocks are adjusted and MDP node cleaned up slightly, on SC7180. As mentioned above, support for Acer Aspire 1 is introduced. Long lingering patches introducing SC8180X, the Lenovo Flex 5G and the Primus reference device has been merged. On SC8280XP ethernet is added and enabled on the automotive ride platform. An SDC controller is introduced and enabled on the SC8280XP CRD. On the Lenovo Thinkpad X13s and the CRD reference device the USB SuperSpeed phy is added to the Type-C graph, to enable support for orientation switching. Fairphone 3 gains support for its notification LED. On SDM845 the iommu stream for QSPI is defined, SHIFT SHIFT6mq gains support for flash LED and the RB3 (DB845c) board gains support for bonded/dual DSI-mode, to allow 4k output. On SM6115 CPU idle-states, crypto engine support and SuperSpeed USB PHY are introduced. As mentioned above Fxtec Pro1X is introduced. On the QRB4210 Robotics Platform RB2 USB, Audio and Compute DSPs, display, CAN-bus and GPIO LEDs are introduced, fixed regulators are described and the SD-card description is corrected. Support for crypto engine is added to SM8150, while Sony Xperia 1 and 5 gains SD-card support, camera regulators and GPIO line names sorted out. SM8250 also gets support for crypto engine, and Sony Xperia 1 II and 5 II gains support for hardware video accelerator. Crypto engine is introduced for SM8350 as well. The HDK gets the USB Type-C graph described for Superspeed orientation switching and DisplayPort output. On SM8450 video clock controller and crypto engine are added, missing opp levels are introduced and the USB Type-C graph is defined for orientation switching and altmode. SM8550 gains GPU and video clock controllers and missing opp levels are added. The WCD9385 audio codec is added for the SM8550 MTP and on the QRD PCIe, USB, audio display and flash LED are added. * tag 'qcom-arm64-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (195 commits) arm64: dts: qcom: sc8180x: Introduce Lenovo Flex 5G arm64: dts: qcom: sc8180x: Introduce Primus arm64: dts: qcom: sc8180x: Add pmics arm64: dts: qcom: sc8180x: Add display and gpu nodes arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes arm64: dts: qcom: sc8180x: Add PCIe instances arm64: dts: qcom: sc8180x: Add QUPs arm64: dts: qcom: sc8180x: Add thermal zones arm64: dts: qcom: sc8180x: Add interconnects and lmh arm64: dts: qcom: Introduce the SC8180x platform arm64: dts: qcom: msm8916: Move aliases to boards arm64: dts: qcom: pm8916: Rename &wcd_codec -> &pm8916_codec arm64: dts: qcom: msm8916/39: Clean up MDSS labels arm64: dts: qcom: msm8916/39: Use consistent name for I2C/SPI pinctrl arm64: dts: qcom: msm8916/39: Rename &blsp1_uartN -> &blsp_uartN arm64: dts: qcom: msm8916: Rename &msmgpio -> &tlmm arm64: dts: qcom: qrb4210-rb2: Enable USB node arm64: dts: qcom: sm6115: Add USB SS qmp phy node arm64: dts: qcom: ipq5332: add support for the RDP442 variant dt-bindings: arm: qcom: document MI01.3 board based on IPQ5332 family ... Link: https://lore.kernel.org/r/20230611004944.2481596-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
@@ -40,6 +40,7 @@ description: |
|
||||
msm8939
|
||||
msm8953
|
||||
msm8956
|
||||
msm8960
|
||||
msm8974
|
||||
msm8976
|
||||
msm8992
|
||||
@@ -85,8 +86,12 @@ description: |
|
||||
The 'board' element must be one of the following strings:
|
||||
|
||||
adp
|
||||
ap-al02-c2
|
||||
ap-al02-c6
|
||||
ap-al02-c7
|
||||
ap-al02-c8
|
||||
ap-mi01.2
|
||||
ap-mi01.3
|
||||
ap-mi01.6
|
||||
cdp
|
||||
cp01-c1
|
||||
@@ -333,6 +338,7 @@ properties:
|
||||
- items:
|
||||
- enum:
|
||||
- qcom,ipq5332-ap-mi01.2
|
||||
- qcom,ipq5332-ap-mi01.3
|
||||
- qcom,ipq5332-ap-mi01.6
|
||||
- const: qcom,ipq5332
|
||||
|
||||
@@ -351,7 +357,10 @@ properties:
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- qcom,ipq9574-ap-al02-c2
|
||||
- qcom,ipq9574-ap-al02-c6
|
||||
- qcom,ipq9574-ap-al02-c7
|
||||
- qcom,ipq9574-ap-al02-c8
|
||||
- const: qcom,ipq9574
|
||||
|
||||
- description: Sierra Wireless MangOH Green with WP8548 Module
|
||||
@@ -380,9 +389,9 @@ properties:
|
||||
- qcom,qru1000-idp
|
||||
- const: qcom,qru1000
|
||||
|
||||
- description: Qualcomm Technologies, Inc. SC7180 IDP
|
||||
items:
|
||||
- items:
|
||||
- enum:
|
||||
- acer,aspire1
|
||||
- qcom,sc7180-idp
|
||||
- const: qcom,sc7180
|
||||
|
||||
@@ -882,6 +891,11 @@ properties:
|
||||
- const: qcom,qrb4210
|
||||
- const: qcom,sm4250
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- fxtec,pro1x
|
||||
- const: qcom,sm6115
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- lenovo,j606f
|
||||
|
||||
@@ -0,0 +1,75 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/clock/qcom,sm8450-gpucc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Graphics Clock & Reset Controller on SM8450
|
||||
|
||||
maintainers:
|
||||
- Konrad Dybcio <konrad.dybcio@linaro.org>
|
||||
|
||||
description: |
|
||||
Qualcomm graphics clock control module provides the clocks, resets and power
|
||||
domains on Qualcomm SoCs.
|
||||
|
||||
See also::
|
||||
include/dt-bindings/clock/qcom,sm8450-gpucc.h
|
||||
include/dt-bindings/clock/qcom,sm8550-gpucc.h
|
||||
include/dt-bindings/reset/qcom,sm8450-gpucc.h
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,sm8450-gpucc
|
||||
- qcom,sm8550-gpucc
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: Board XO source
|
||||
- description: GPLL0 main branch source
|
||||
- description: GPLL0 div branch source
|
||||
|
||||
'#clock-cells':
|
||||
const: 1
|
||||
|
||||
'#reset-cells':
|
||||
const: 1
|
||||
|
||||
'#power-domain-cells':
|
||||
const: 1
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- '#clock-cells'
|
||||
- '#reset-cells'
|
||||
- '#power-domain-cells'
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
|
||||
soc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
clock-controller@3d90000 {
|
||||
compatible = "qcom,sm8450-gpucc";
|
||||
reg = <0 0x03d90000 0 0xa000>;
|
||||
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
||||
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
|
||||
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
};
|
||||
...
|
||||
@@ -0,0 +1,77 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/clock/qcom,sm8450-videocc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Video Clock & Reset Controller on SM8450
|
||||
|
||||
maintainers:
|
||||
- Taniya Das <quic_tdas@quicinc.com>
|
||||
|
||||
description: |
|
||||
Qualcomm video clock control module provides the clocks, resets and power
|
||||
domains on SM8450.
|
||||
|
||||
See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,sm8450-videocc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: Board XO source
|
||||
- description: Video AHB clock from GCC
|
||||
|
||||
power-domains:
|
||||
maxItems: 1
|
||||
description:
|
||||
MMCX power domain.
|
||||
|
||||
required-opps:
|
||||
maxItems: 1
|
||||
description:
|
||||
A phandle to an OPP node describing required MMCX performance point.
|
||||
|
||||
'#clock-cells':
|
||||
const: 1
|
||||
|
||||
'#reset-cells':
|
||||
const: 1
|
||||
|
||||
'#power-domain-cells':
|
||||
const: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- power-domains
|
||||
- required-opps
|
||||
- '#clock-cells'
|
||||
- '#reset-cells'
|
||||
- '#power-domain-cells'
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
#include <dt-bindings/power/qcom-rpmpd.h>
|
||||
videocc: clock-controller@aaf0000 {
|
||||
compatible = "qcom,sm8450-videocc";
|
||||
reg = <0x0aaf0000 0x10000>;
|
||||
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
||||
<&gcc GCC_VIDEO_AHB_CLK>;
|
||||
power-domains = <&rpmhpd SM8450_MMCX>;
|
||||
required-opps = <&rpmhpd_opp_low_svs>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
...
|
||||
@@ -18,8 +18,11 @@ properties:
|
||||
- enum:
|
||||
- qcom,apq8064-qfprom
|
||||
- qcom,apq8084-qfprom
|
||||
- qcom,ipq5332-qfprom
|
||||
- qcom,ipq6018-qfprom
|
||||
- qcom,ipq8064-qfprom
|
||||
- qcom,ipq8074-qfprom
|
||||
- qcom,ipq9574-qfprom
|
||||
- qcom,msm8916-qfprom
|
||||
- qcom,msm8974-qfprom
|
||||
- qcom,msm8976-qfprom
|
||||
|
||||
@@ -1269,6 +1269,8 @@ patternProperties:
|
||||
description: SpinalHDL
|
||||
"^sprd,.*":
|
||||
description: Spreadtrum Communications Inc.
|
||||
"^square,.*":
|
||||
description: Square
|
||||
"^ssi,.*":
|
||||
description: SSI Computer Corp
|
||||
"^sst,.*":
|
||||
|
||||
@@ -1,15 +1,20 @@
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp418.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
|
||||
@@ -32,6 +37,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb
|
||||
@@ -82,6 +88,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-acer-aspire1.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
|
||||
@@ -140,6 +147,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-zombie-nvme-lte.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb
|
||||
@@ -174,6 +183,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm6115-fxtec-pro1x.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb
|
||||
|
||||
@@ -18,8 +18,10 @@
|
||||
compatible = "qcom,apq8016-sbc", "qcom,apq8016";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
serial1 = &blsp1_uart1;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
serial1 = &blsp_uart1;
|
||||
usid0 = &pm8916_0;
|
||||
i2c0 = &blsp_i2c2;
|
||||
i2c1 = &blsp_i2c6;
|
||||
@@ -75,7 +77,7 @@
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
|
||||
id-gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
};
|
||||
@@ -101,13 +103,13 @@
|
||||
button {
|
||||
label = "Volume Up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&msmgpio_leds>,
|
||||
pinctrl-0 = <&tlmm_leds>,
|
||||
<&pm8916_gpios_leds>,
|
||||
<&pm8916_mpps_leds>;
|
||||
|
||||
@@ -117,7 +119,7 @@
|
||||
label = "apq8016-sbc:green:user1";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
@@ -126,7 +128,7 @@
|
||||
label = "apq8016-sbc:green:user2";
|
||||
function = LED_FUNCTION_DISK_ACTIVITY;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
@@ -186,14 +188,14 @@
|
||||
compatible = "adi,adv7533";
|
||||
reg = <0x39>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
adi,dsi-lanes = <4>;
|
||||
clocks = <&rpmcc RPM_SMD_BB_CLK2>;
|
||||
clock-names = "cec";
|
||||
|
||||
pd-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
|
||||
pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
avdd-supply = <&pm8916_l6>;
|
||||
v1p2-supply = <&pm8916_l6>;
|
||||
@@ -211,7 +213,7 @@
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7533_in: endpoint {
|
||||
remote-endpoint = <&dsi0_out>;
|
||||
remote-endpoint = <&mdss_dsi0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -243,12 +245,12 @@
|
||||
label = "LS-SPI0";
|
||||
};
|
||||
|
||||
&blsp1_uart1 {
|
||||
&blsp_uart1 {
|
||||
status = "okay";
|
||||
label = "LS-UART0";
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
label = "LS-UART1";
|
||||
};
|
||||
@@ -276,8 +278,8 @@
|
||||
compatible = "ovti,ov5640";
|
||||
reg = <0x3b>;
|
||||
|
||||
enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
|
||||
enable-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&camera_rear_default>;
|
||||
|
||||
@@ -301,12 +303,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
&dsi0_out {
|
||||
data-lanes = <0 1 2 3>;
|
||||
remote-endpoint = <&adv7533_in>;
|
||||
&lpass {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpass {
|
||||
&lpass_codec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -314,17 +315,59 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_dsi0_out {
|
||||
data-lanes = <0 1 2 3>;
|
||||
remote-endpoint = <&adv7533_in>;
|
||||
};
|
||||
|
||||
&mpss {
|
||||
status = "okay";
|
||||
|
||||
firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
|
||||
};
|
||||
|
||||
&pm8916_codec {
|
||||
status = "okay";
|
||||
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
|
||||
clock-names = "mclk";
|
||||
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
||||
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
||||
};
|
||||
|
||||
&pm8916_resin {
|
||||
status = "okay";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
/*
|
||||
* The 96Boards specification expects a 1.8V power rail on the low-speed
|
||||
* expansion connector that is able to provide at least 0.18W / 100 mA.
|
||||
* L15/L16 are connected in parallel to provide 55 mA each. A minimum load
|
||||
* must be specified to ensure the regulators are not put in LPM where they
|
||||
* would only provide 5 mA.
|
||||
*/
|
||||
pm8916_l15: l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-system-load = <50000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-always-on;
|
||||
};
|
||||
pm8916_l16: l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-system-load = <50000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
status = "okay";
|
||||
|
||||
@@ -340,7 +383,7 @@
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
|
||||
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&sound {
|
||||
@@ -370,7 +413,7 @@
|
||||
sound-dai = <&lpass MI2S_PRIMARY>;
|
||||
};
|
||||
codec {
|
||||
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
|
||||
sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -380,7 +423,7 @@
|
||||
sound-dai = <&lpass MI2S_TERTIARY>;
|
||||
};
|
||||
codec {
|
||||
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
|
||||
sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -398,13 +441,6 @@
|
||||
extcon = <&usb_id>;
|
||||
};
|
||||
|
||||
&wcd_codec {
|
||||
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
|
||||
clock-names = "mclk";
|
||||
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
||||
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
||||
};
|
||||
|
||||
&wcnss {
|
||||
status = "okay";
|
||||
firmware-name = "qcom/apq8016/wcnss.mbn";
|
||||
@@ -441,130 +477,19 @@
|
||||
&stm { status = "okay"; };
|
||||
&tpiu { status = "okay"; };
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <375000>;
|
||||
regulator-max-microvolt = <1562000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <375000>;
|
||||
regulator-max-microvolt = <1525000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <200000>;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
|
||||
/**
|
||||
* 1.8v required on LS expansion
|
||||
* for mezzanine boards
|
||||
*/
|
||||
l15 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* 2mA drive strength is not enough when connecting multiple
|
||||
* I2C devices with different pull up resistors.
|
||||
*/
|
||||
&i2c2_default {
|
||||
&blsp_i2c2_default {
|
||||
drive-strength = <16>;
|
||||
};
|
||||
|
||||
&i2c4_default {
|
||||
&blsp_i2c4_default {
|
||||
drive-strength = <16>;
|
||||
};
|
||||
|
||||
&i2c6_default {
|
||||
&blsp_i2c6_default {
|
||||
drive-strength = <16>;
|
||||
};
|
||||
|
||||
@@ -592,7 +517,7 @@
|
||||
* ones actually used for GPIO.
|
||||
*/
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
gpio-line-names =
|
||||
"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
|
||||
"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
|
||||
@@ -717,7 +642,7 @@
|
||||
"USR_LED_2_CTRL", /* GPIO 120 */
|
||||
"SB_HS_ID";
|
||||
|
||||
msmgpio_leds: msmgpio-leds-state {
|
||||
tlmm_leds: tlmm-leds-state {
|
||||
pins = "gpio21", "gpio120";
|
||||
function = "gpio";
|
||||
|
||||
|
||||
492
arch/arm64/boot/dts/qcom/apq8039-t2.dts
Normal file
492
arch/arm64/boot/dts/qcom/apq8039-t2.dts
Normal file
@@ -0,0 +1,492 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2020-2023, Linaro Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8939.dtsi"
|
||||
#include "msm8939-pm8916.dtsi"
|
||||
#include <dt-bindings/arm/qcom,ids.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/sound/apq8016-lpass.h>
|
||||
|
||||
/ {
|
||||
model = "Square, Inc. T2 Devkit";
|
||||
compatible = "square,apq8039-t2", "qcom,msm8939";
|
||||
|
||||
qcom,board-id = <0x53 0x54>;
|
||||
qcom,msm-id = <QCOM_ID_APQ8039 0x30000>;
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhc_1;
|
||||
mmc1 = &sdhc_2;
|
||||
serial0 = &blsp_uart1;
|
||||
serial1 = &blsp_uart2;
|
||||
};
|
||||
|
||||
bl: backlight {
|
||||
compatible = "gpio-backlight";
|
||||
pinctrl-0 = <&pinctrl_backlight>;
|
||||
pinctrl-names = "default";
|
||||
gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial1:115200n8";
|
||||
};
|
||||
|
||||
vreg_lcd_avdd_reg: lcd-avdd-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcd_avdd";
|
||||
regulator-min-microvolt = <5600000>;
|
||||
regulator-max-microvolt = <5600000>;
|
||||
pinctrl-0 = <&pinctrl_lcd_avdd_reg>;
|
||||
pinctrl-names = "default";
|
||||
gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <300>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vreg_lcd_avee_reg: lcd-avee-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcd_avee";
|
||||
regulator-min-microvolt = <5600000>;
|
||||
regulator-max-microvolt = <5600000>;
|
||||
pinctrl-0 = <&pinctrl_lcd_avee_reg>;
|
||||
pinctrl-names = "default";
|
||||
gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <300>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vreg_lcd_iovcc_reg: lcd-iovcc-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcd_iovcc";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
pinctrl-0 = <&pinctrl_lcd_iovcc_reg>;
|
||||
pinctrl-names = "default";
|
||||
gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <300>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp_i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp_i2c3 {
|
||||
status = "okay";
|
||||
|
||||
typec_pd: usb-pd@38 {
|
||||
compatible = "ti,tps6598x";
|
||||
reg = <0x38>;
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <107 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-names = "irq";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&typec_irq>;
|
||||
|
||||
typec_con: connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
|
||||
port {
|
||||
typec_ep: endpoint {
|
||||
remote-endpoint = <&otg_ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp_uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp_uart1_default {
|
||||
pins = "gpio0", "gpio1";
|
||||
};
|
||||
|
||||
&blsp_uart1_sleep {
|
||||
pins = "gpio0", "gpio1";
|
||||
};
|
||||
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpass {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_codec {
|
||||
qcom,hphl-jack-type-normally-open;
|
||||
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
||||
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_gpios {
|
||||
gpio-line-names =
|
||||
"PM_GPIO1", /* WIFI_GPIO1_PRE */
|
||||
"PM_GPIO2", /* WIFI_GPIO2_PRE */
|
||||
"PM_GPIO3",
|
||||
"PM_GPIO4";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
pm8916_s3: s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
pm8916_s4: s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
/* l1 is fixed to 1225000, but not connected in schematic */
|
||||
|
||||
pm8916_l2: l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
pm8916_l4: l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
pm8916_l5: l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8916_l6: l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8916_l7: l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8916_l8: l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
pm8916_l9: l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l10: l10 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l11: l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
pm8916_l12: l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
pm8916_l13: l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
pm8916_l14: l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l15: l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l16: l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
pm8916_l18: l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sdc1_default_state>;
|
||||
pinctrl-1 = <&sdc1_sleep_state>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sound {
|
||||
model = "apq8039-square-sndcard";
|
||||
audio-routing = "AMIC2", "MIC BIAS Internal2";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cdc_pdm_lines_default>;
|
||||
pinctrl-1 = <&cdc_pdm_lines_sleep>;
|
||||
|
||||
internal-codec-playback-dai-link {
|
||||
link-name = "WCD";
|
||||
cpu {
|
||||
sound-dai = <&lpass MI2S_PRIMARY>;
|
||||
};
|
||||
codec {
|
||||
sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
|
||||
};
|
||||
};
|
||||
|
||||
internal-codec-capture-dai-link {
|
||||
link-name = "WCD-Capture";
|
||||
cpu {
|
||||
sound-dai = <&lpass MI2S_TERTIARY>;
|
||||
};
|
||||
codec {
|
||||
sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Line names are taken from the schematic of T2, Ver X03.
|
||||
* July 14, 2018. Page 4 in particular.
|
||||
*/
|
||||
&tlmm {
|
||||
gpio-line-names =
|
||||
"APQ_UART1_TX", /* GPIO_0 */
|
||||
"APQ_UART1_RX",
|
||||
"APQ_I2C1_SDA",
|
||||
"APQ_I2C1_SCL",
|
||||
"APQ_UART2_TX_1V8",
|
||||
"APQ_UART2_RX_1V8",
|
||||
"APQ_I2C2_SDA",
|
||||
"APQ_I2C2_SCL",
|
||||
"NC",
|
||||
"APQ_LCD_IOVCC_EN",
|
||||
"APQ_I2C3_SDA", /* GPIO_10 */
|
||||
"APQ_I2C3_SCL",
|
||||
"TOUCH_RST_1V8_L",
|
||||
"NC",
|
||||
"APQ_I2C4_SDA",
|
||||
"APQ_I2C4_SCL",
|
||||
"APQ_ID5",
|
||||
"USB_DISCONNECT",
|
||||
"APQ_I2C5_SDA",
|
||||
"APQ_I2C5_SCL",
|
||||
"APQ_USBC_SPI_MOSI", /* GPIO_20 */
|
||||
"APQ_USBC_SPI_MISO",
|
||||
"APQ_USBC_SPI_SS_L",
|
||||
"APQ_USBC_SPI_CLK",
|
||||
"APQ_LCD_TE0",
|
||||
"APQ_LCD_RST_L",
|
||||
"NC",
|
||||
"NC",
|
||||
"ACCELEROMETER_INT1",
|
||||
"APQ_CAM_I2C0_SDA",
|
||||
"APQ_CAM_I2C0_SCL", /* GPIO_30 */
|
||||
"ACCELEROMETER_INT2",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"APQ_K21_RST_1V8_L",
|
||||
"NC",
|
||||
"APQ_EDL_1V8",
|
||||
"TP145",
|
||||
"BT_SSBI",
|
||||
"NC", /* GPIO_40 */
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"BT_CTRL",
|
||||
"BT_DAT",
|
||||
"PWR_GPIO_IN",
|
||||
"PWR_GPIO_OUT", /* GPIO_50 */
|
||||
"CARD_DET_MLB_L",
|
||||
"HALL_SENSOR",
|
||||
"TP63",
|
||||
"TP64",
|
||||
"TP65",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC", /* GPIO_60 */
|
||||
"NC",
|
||||
"APQ_K21_GPIO0_1V8",
|
||||
"CDC_PDM_CLK",
|
||||
"CDC_PDM_SYNC",
|
||||
"CDC_PDM_TX",
|
||||
"CDC_PDM_RX0",
|
||||
"CDC_PDM_RX1",
|
||||
"CDC_PDM_RX2",
|
||||
"APQ_K21_GPIO1_1V8",
|
||||
"NC", /* GPIO_70 */
|
||||
"APQ_HUB_SEL_1V8",
|
||||
"APQ_K21_GPIO2_1V8",
|
||||
"APQ_K21_GPIO3_1V8",
|
||||
"APQ_ID0",
|
||||
"APQ_ID1",
|
||||
"APQ_ID2",
|
||||
"APQ_ID3",
|
||||
"APQ_ID4",
|
||||
"APQ_HUB_SUSP_IND",
|
||||
"BOOT_CONFIG_0", /* GPIO_80 */
|
||||
"BOOT_CONFIG_1",
|
||||
"BOOT_CONFIG_2",
|
||||
"BOOT_CONFIG_3",
|
||||
"NC",
|
||||
"NC",
|
||||
"APQ_LCD_AVDD_EN",
|
||||
"APQ_LCD_AVEE_EN",
|
||||
"TP70",
|
||||
"NC",
|
||||
"APQ_DEBUG0", /* GPIO_90 */
|
||||
"APQ_DEBUG1",
|
||||
"APQ_DEBUG2",
|
||||
"APQ_DEBUG3",
|
||||
"TP165",
|
||||
"NC",
|
||||
"APQ_LNA_PWR_EN",
|
||||
"NC",
|
||||
"APQ_LCD_BL_EN",
|
||||
"NC",
|
||||
"APQ_LCD_ID0", /* GPIO_100 */
|
||||
"APQ_LCD_ID1",
|
||||
"USBC_GPIO5_1V8",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"APQ_HUB_RST_1V8_L",
|
||||
"USBC_I2C_IRQ_1V8_L",
|
||||
"SPE_PWR_EN",
|
||||
"NC",
|
||||
"APQ_USB_ID", /* GPIO_110 */
|
||||
"APQ_EXT_BUCK_VSEL",
|
||||
"APQ_USB_ID_OUT",
|
||||
"NC",
|
||||
"PRNT_RST_L",
|
||||
"APQ_CRQ_I2C_RDY_1V8",
|
||||
"TYPEC_RST_1V8_H",
|
||||
"CHG_BACKPWR_EN",
|
||||
"CHG_PROCHOT_L",
|
||||
"NC",
|
||||
"USBC_GPIO7_1V8", /* GPIO_120 */
|
||||
"NC";
|
||||
|
||||
pinctrl_backlight: backlight-state {
|
||||
pins = "gpio98";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
pinctrl_lcd_avdd_reg: lcd-avdd-reg-state {
|
||||
pins = "gpio86";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
pinctrl_lcd_avee_reg: lcd-avee-reg-state {
|
||||
pins = "gpio87";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
pinctrl_lcd_iovcc_reg: lcd-iovcc-reg-state {
|
||||
pins = "gpio9";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
pinctrl_lcd_rst: lcd-rst-state {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
pinctrl_otg_default: otg-default-state {
|
||||
function = "gpio";
|
||||
pins = "gpio17";
|
||||
output-high;
|
||||
};
|
||||
|
||||
pinctrl_otg_device: otg-device-state {
|
||||
function = "gpio";
|
||||
pins = "gpio17";
|
||||
output-low;
|
||||
};
|
||||
|
||||
pinctrl_otg_host: otg-host-state {
|
||||
function = "gpio";
|
||||
pins = "gpio17";
|
||||
output-low;
|
||||
};
|
||||
|
||||
typec_irq: typec-irq-state {
|
||||
function = "gpio";
|
||||
pins = "gpio107";
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
&usb {
|
||||
pinctrl-names = "default", "host", "device";
|
||||
pinctrl-0 = <&pinctrl_otg_default>;
|
||||
pinctrl-1 = <&pinctrl_otg_host>;
|
||||
pinctrl-2 = <&pinctrl_otg_device>;
|
||||
pin-switch-delay-us = <100000>;
|
||||
usb-role-switch;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
otg_ep: endpoint {
|
||||
remote-endpoint = <&typec_ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wcnss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcnss_iris {
|
||||
compatible = "qcom,wcn3680";
|
||||
};
|
||||
@@ -26,7 +26,7 @@
|
||||
|
||||
v1p05: v1p05-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
reglator-name = "v1p05";
|
||||
regulator-name = "v1p05";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
@@ -38,7 +38,7 @@
|
||||
|
||||
v12_poe: v12-poe-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
reglator-name = "v12_poe";
|
||||
regulator-name = "v12_poe";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
|
||||
117
arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
Normal file
117
arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
Normal file
@@ -0,0 +1,117 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* IPQ5332 RDP442 board device tree source
|
||||
*
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq5332.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. IPQ5332 MI01.3";
|
||||
compatible = "qcom,ipq5332-ap-mi01.3", "qcom,ipq5332";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart0 {
|
||||
pinctrl-0 = <&serial_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp1_i2c1 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-0 = <&i2c_1_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp1_spi0 {
|
||||
pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "micron,n25q128a11", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc {
|
||||
bus-width = <4>;
|
||||
max-frequency = <192000000>;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-0 = <&sdc_default_state>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sleep_clk {
|
||||
clock-frequency = <32000>;
|
||||
};
|
||||
|
||||
&xo_board {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
/* PINCTRL */
|
||||
|
||||
&tlmm {
|
||||
i2c_1_pins: i2c-1-state {
|
||||
pins = "gpio29", "gpio30";
|
||||
function = "blsp1_i2c0";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
sdc_default_state: sdc-default-state {
|
||||
clk-pins {
|
||||
pins = "gpio13";
|
||||
function = "sdc_clk";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cmd-pins {
|
||||
pins = "gpio12";
|
||||
function = "sdc_cmd";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
data-pins {
|
||||
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
||||
function = "sdc_data";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
spi_0_data_clk_pins: spi-0-data-clk-state {
|
||||
pins = "gpio14", "gpio15", "gpio16";
|
||||
function = "blsp0_spi";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
spi_0_cs_pins: spi-0-cs-state {
|
||||
pins = "gpio17";
|
||||
function = "blsp0_spi";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
@@ -134,6 +134,13 @@
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0 0xffffffff>;
|
||||
|
||||
qfprom: efuse@a4000 {
|
||||
compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
|
||||
reg = <0x000a4000 0x721>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
rng: rng@e3000 {
|
||||
compatible = "qcom,prng-ee";
|
||||
reg = <0x000e3000 0x1000>;
|
||||
|
||||
@@ -90,6 +90,7 @@
|
||||
firmware {
|
||||
scm {
|
||||
compatible = "qcom,scm-ipq6018", "qcom,scm";
|
||||
qcom,dload-mode = <&tcsr 0x6100>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -154,18 +155,28 @@
|
||||
no-map;
|
||||
};
|
||||
|
||||
bootloader@4a100000 {
|
||||
reg = <0x0 0x4a100000 0x0 0x400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
sbl@4a500000 {
|
||||
reg = <0x0 0x4a500000 0x0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
tz: memory@4a600000 {
|
||||
reg = <0x0 0x4a600000 0x0 0x00400000>;
|
||||
reg = <0x0 0x4a600000 0x0 0x400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
smem_region: memory@4aa00000 {
|
||||
reg = <0x0 0x4aa00000 0x0 0x00100000>;
|
||||
reg = <0x0 0x4aa00000 0x0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
q6_region: memory@4ab00000 {
|
||||
reg = <0x0 0x4ab00000 0x0 0x05500000>;
|
||||
reg = <0x0 0x4ab00000 0x0 0x5500000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
@@ -198,7 +209,7 @@
|
||||
hwlocks = <&tcsr_mutex 0>;
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
soc: soc@0 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0 0 0 0 0x0 0xffffffff>;
|
||||
@@ -301,7 +312,14 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
prng: qrng@e1000 {
|
||||
qfprom: efuse@a4000 {
|
||||
compatible = "qcom,ipq6018-qfprom", "qcom,qfprom";
|
||||
reg = <0x0 0x000a4000 0x0 0x2000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
prng: qrng@e3000 {
|
||||
compatible = "qcom,prng-ee";
|
||||
reg = <0x0 0x000e3000 0x0 0x1000>;
|
||||
clocks = <&gcc GCC_PRNG_AHB_CLK>;
|
||||
@@ -440,7 +458,6 @@
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x078b5000 0x0 0x600>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||||
spi-max-frequency = <50000000>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
@@ -455,7 +472,6 @@
|
||||
#size-cells = <0>;
|
||||
reg = <0x0 0x078b6000 0x0 0x600>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
spi-max-frequency = <50000000>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
@@ -571,7 +587,7 @@
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <0x3>;
|
||||
#interrupt-cells = <3>;
|
||||
reg = <0x0 0x0b000000 0x0 0x1000>, /*GICD*/
|
||||
<0x0 0x0b002000 0x0 0x1000>, /*GICC*/
|
||||
<0x0 0x0b001000 0x0 0x1000>, /*GICH*/
|
||||
|
||||
@@ -29,8 +29,8 @@
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
CPU0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
@@ -85,29 +85,40 @@
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
bootloader@4a600000 {
|
||||
reg = <0x0 0x4a600000 0x0 0x400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
sbl@4aa00000 {
|
||||
reg = <0x0 0x4aa00000 0x0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
smem@4ab00000 {
|
||||
compatible = "qcom,smem";
|
||||
reg = <0x0 0x4ab00000 0x0 0x00100000>;
|
||||
reg = <0x0 0x4ab00000 0x0 0x100000>;
|
||||
no-map;
|
||||
|
||||
hwlocks = <&tcsr_mutex 0>;
|
||||
};
|
||||
|
||||
memory@4ac00000 {
|
||||
reg = <0x0 0x4ac00000 0x0 0x400000>;
|
||||
no-map;
|
||||
reg = <0x0 0x4ac00000 0x0 0x00400000>;
|
||||
};
|
||||
};
|
||||
|
||||
firmware {
|
||||
scm {
|
||||
compatible = "qcom,scm-ipq8074", "qcom,scm";
|
||||
qcom,dload-mode = <&tcsr 0x6100>;
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x1>;
|
||||
soc: soc@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0 0xffffffff>;
|
||||
compatible = "simple-bus";
|
||||
|
||||
@@ -321,9 +332,9 @@
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&tlmm 0 0 70>;
|
||||
#gpio-cells = <0x2>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <0x2>;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
serial_4_pins: serial4-state {
|
||||
pins = "gpio23", "gpio24";
|
||||
@@ -381,6 +392,11 @@
|
||||
#hwlock-cells = <1>;
|
||||
};
|
||||
|
||||
tcsr: syscon@1937000 {
|
||||
compatible = "qcom,tcsr-ipq8074", "syscon";
|
||||
reg = <0x01937000 0x21000>;
|
||||
};
|
||||
|
||||
spmi_bus: spmi@200f000 {
|
||||
compatible = "qcom,spmi-pmic-arb";
|
||||
reg = <0x0200f000 0x001000>,
|
||||
@@ -475,7 +491,6 @@
|
||||
#size-cells = <0>;
|
||||
reg = <0x078b5000 0x600>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||||
spi-max-frequency = <50000000>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
@@ -533,6 +548,20 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_spi5: spi@78b9000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x78b9000 0x600>;
|
||||
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp_dma 20>, <&blsp_dma 21>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_i2c6: i2c@78ba000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
#address-cells = <1>;
|
||||
@@ -666,7 +695,7 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <0x3>;
|
||||
#interrupt-cells = <3>;
|
||||
reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
|
||||
ranges = <0 0xb00a000 0xffd>;
|
||||
|
||||
|
||||
124
arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
Normal file
124
arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
Normal file
@@ -0,0 +1,124 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* IPQ9574 RDP418 board device tree source
|
||||
*
|
||||
* Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq9574.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
|
||||
compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_spi0 {
|
||||
pinctrl-0 = <&spi_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "micron,n25q128a11", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
regulators {
|
||||
compatible = "qcom,rpm-mp5496-regulators";
|
||||
|
||||
ipq9574_s1: s1 {
|
||||
/*
|
||||
* During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
|
||||
* During regulator registration, kernel not knowing the initial voltage,
|
||||
* considers it as zero and brings up the regulators with minimum supported voltage.
|
||||
* Update the regulator-min-microvolt with SVS voltage of 725mV so that
|
||||
* the regulators are brought up with 725mV which is sufficient for all the
|
||||
* corner parts to operate at 800MHz
|
||||
*/
|
||||
regulator-min-microvolt = <725000>;
|
||||
regulator-max-microvolt = <1075000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
pinctrl-0 = <&sdc_default_state>;
|
||||
pinctrl-names = "default";
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
max-frequency = <384000000>;
|
||||
bus-width = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sleep_clk {
|
||||
clock-frequency = <32000>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
sdc_default_state: sdc-default-state {
|
||||
clk-pins {
|
||||
pins = "gpio5";
|
||||
function = "sdc_clk";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cmd-pins {
|
||||
pins = "gpio4";
|
||||
function = "sdc_cmd";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
data-pins {
|
||||
pins = "gpio0", "gpio1", "gpio2",
|
||||
"gpio3", "gpio6", "gpio7",
|
||||
"gpio8", "gpio9";
|
||||
function = "sdc_data";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
rclk-pins {
|
||||
pins = "gpio10";
|
||||
function = "sdc_rclk";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
spi_0_pins: spi-0-state {
|
||||
pins = "gpio11", "gpio12", "gpio13", "gpio14";
|
||||
function = "blsp0_spi";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
&xo_board_clk {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
@@ -1,6 +1,6 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* IPQ9574 AL02-C7 board device tree source
|
||||
* IPQ9574 RDP433 board device tree source
|
||||
*
|
||||
* Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
@@ -29,6 +29,25 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
regulators {
|
||||
compatible = "qcom,rpm-mp5496-regulators";
|
||||
|
||||
ipq9574_s1: s1 {
|
||||
/*
|
||||
* During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
|
||||
* During regulator registration, kernel not knowing the initial voltage,
|
||||
* considers it as zero and brings up the regulators with minimum supported voltage.
|
||||
* Update the regulator-min-microvolt with SVS voltage of 725mV so that
|
||||
* the regulators are brought up with 725mV which is sufficient for all the
|
||||
* corner parts to operate at 800MHz
|
||||
*/
|
||||
regulator-min-microvolt = <725000>;
|
||||
regulator-max-microvolt = <1075000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
pinctrl-0 = <&sdc_default_state>;
|
||||
pinctrl-names = "default";
|
||||
80
arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
Normal file
80
arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
Normal file
@@ -0,0 +1,80 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* IPQ9574 RDP449 board device tree source
|
||||
*
|
||||
* Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq9574.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
|
||||
compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_spi0 {
|
||||
pinctrl-0 = <&spi_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "micron,n25q128a11", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
regulators {
|
||||
compatible = "qcom,rpm-mp5496-regulators";
|
||||
|
||||
ipq9574_s1: s1 {
|
||||
/*
|
||||
* During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
|
||||
* During regulator registration, kernel not knowing the initial voltage,
|
||||
* considers it as zero and brings up the regulators with minimum supported voltage.
|
||||
* Update the regulator-min-microvolt with SVS voltage of 725mV so that
|
||||
* the regulators are brought up with 725mV which is sufficient for all the
|
||||
* corner parts to operate at 800MHz
|
||||
*/
|
||||
regulator-min-microvolt = <725000>;
|
||||
regulator-max-microvolt = <1075000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sleep_clk {
|
||||
clock-frequency = <32000>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
spi_0_pins: spi-0-state {
|
||||
pins = "gpio11", "gpio12", "gpio13", "gpio14";
|
||||
function = "blsp0_spi";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
&xo_board_clk {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
80
arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
Normal file
80
arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
Normal file
@@ -0,0 +1,80 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* IPQ9574 RDP453 board device tree source
|
||||
*
|
||||
* Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq9574.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
|
||||
compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_spi0 {
|
||||
pinctrl-0 = <&spi_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "micron,n25q128a11", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
regulators {
|
||||
compatible = "qcom,rpm-mp5496-regulators";
|
||||
|
||||
ipq9574_s1: s1 {
|
||||
/*
|
||||
* During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
|
||||
* During regulator registration, kernel not knowing the initial voltage,
|
||||
* considers it as zero and brings up the regulators with minimum supported voltage.
|
||||
* Update the regulator-min-microvolt with SVS voltage of 725mV so that
|
||||
* the regulators are brought up with 725mV which is sufficient for all the
|
||||
* corner parts to operate at 800MHz
|
||||
*/
|
||||
regulator-min-microvolt = <725000>;
|
||||
regulator-max-microvolt = <1075000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sleep_clk {
|
||||
clock-frequency = <32000>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
spi_0_pins: spi-0-state {
|
||||
pins = "gpio11", "gpio12", "gpio13", "gpio14";
|
||||
function = "blsp0_spi";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
&xo_board_clk {
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
@@ -6,8 +6,9 @@
|
||||
* Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/qcom,apss-ipq.h>
|
||||
#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
|
||||
|
||||
/ {
|
||||
@@ -16,12 +17,6 @@
|
||||
#size-cells = <2>;
|
||||
|
||||
clocks {
|
||||
bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <353000000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
sleep_clk: sleep-clk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
@@ -43,6 +38,10 @@
|
||||
reg = <0x0>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&L2_0>;
|
||||
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
|
||||
clock-names = "cpu";
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
cpu-supply = <&ipq9574_s1>;
|
||||
};
|
||||
|
||||
CPU1: cpu@1 {
|
||||
@@ -51,6 +50,10 @@
|
||||
reg = <0x1>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&L2_0>;
|
||||
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
|
||||
clock-names = "cpu";
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
cpu-supply = <&ipq9574_s1>;
|
||||
};
|
||||
|
||||
CPU2: cpu@2 {
|
||||
@@ -59,6 +62,10 @@
|
||||
reg = <0x2>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&L2_0>;
|
||||
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
|
||||
clock-names = "cpu";
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
cpu-supply = <&ipq9574_s1>;
|
||||
};
|
||||
|
||||
CPU3: cpu@3 {
|
||||
@@ -67,6 +74,10 @@
|
||||
reg = <0x3>;
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&L2_0>;
|
||||
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
|
||||
clock-names = "cpu";
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
cpu-supply = <&ipq9574_s1>;
|
||||
};
|
||||
|
||||
L2_0: l2-cache {
|
||||
@@ -75,12 +86,60 @@
|
||||
};
|
||||
};
|
||||
|
||||
firmware {
|
||||
scm {
|
||||
compatible = "qcom,scm-ipq9574", "qcom,scm";
|
||||
qcom,dload-mode = <&tcsr 0x6100>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
/* We expect the bootloader to fill in the size */
|
||||
reg = <0x0 0x40000000 0x0 0x0>;
|
||||
};
|
||||
|
||||
cpu_opp_table: opp-table-cpu {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp-936000000 {
|
||||
opp-hz = /bits/ 64 <936000000>;
|
||||
opp-microvolt = <725000>;
|
||||
clock-latency-ns = <200000>;
|
||||
};
|
||||
|
||||
opp-1104000000 {
|
||||
opp-hz = /bits/ 64 <1104000000>;
|
||||
opp-microvolt = <787500>;
|
||||
clock-latency-ns = <200000>;
|
||||
};
|
||||
|
||||
opp-1416000000 {
|
||||
opp-hz = /bits/ 64 <1416000000>;
|
||||
opp-microvolt = <862500>;
|
||||
clock-latency-ns = <200000>;
|
||||
};
|
||||
|
||||
opp-1488000000 {
|
||||
opp-hz = /bits/ 64 <1488000000>;
|
||||
opp-microvolt = <925000>;
|
||||
clock-latency-ns = <200000>;
|
||||
};
|
||||
|
||||
opp-1800000000 {
|
||||
opp-hz = /bits/ 64 <1800000000>;
|
||||
opp-microvolt = <987500>;
|
||||
clock-latency-ns = <200000>;
|
||||
};
|
||||
|
||||
opp-2208000000 {
|
||||
opp-hz = /bits/ 64 <2208000000>;
|
||||
opp-microvolt = <1062500>;
|
||||
clock-latency-ns = <200000>;
|
||||
};
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a73-pmu";
|
||||
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
@@ -100,6 +159,25 @@
|
||||
reg = <0x0 0x4a600000 0x0 0x400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
smem@4aa00000 {
|
||||
compatible = "qcom,smem";
|
||||
reg = <0x0 0x4aa00000 0x0 0x00100000>;
|
||||
hwlocks = <&tcsr_mutex 0>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
rpm-glink {
|
||||
compatible = "qcom,glink-rpm";
|
||||
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
|
||||
qcom,rpm-msg-ram = <&rpm_msg_ram>;
|
||||
mboxes = <&apcs_glb 0>;
|
||||
|
||||
rpm_requests: rpm-requests {
|
||||
compatible = "qcom,rpm-ipq9574";
|
||||
qcom,glink-channels = "rpm_requests";
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc@0 {
|
||||
@@ -108,6 +186,25 @@
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0 0xffffffff>;
|
||||
|
||||
rpm_msg_ram: sram@60000 {
|
||||
compatible = "qcom,rpm-msg-ram";
|
||||
reg = <0x00060000 0x6000>;
|
||||
};
|
||||
|
||||
rng: rng@e3000 {
|
||||
compatible = "qcom,prng-ee";
|
||||
reg = <0x000e3000 0x1000>;
|
||||
clocks = <&gcc GCC_PRNG_AHB_CLK>;
|
||||
clock-names = "core";
|
||||
};
|
||||
|
||||
qfprom: efuse@a4000 {
|
||||
compatible = "qcom,ipq9574-qfprom", "qcom,qfprom";
|
||||
reg = <0x000a4000 0x5a1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
tlmm: pinctrl@1000000 {
|
||||
compatible = "qcom,ipq9574-tlmm";
|
||||
reg = <0x01000000 0x300000>;
|
||||
@@ -131,7 +228,7 @@
|
||||
reg = <0x01800000 0x80000>;
|
||||
clocks = <&xo_board_clk>,
|
||||
<&sleep_clk>,
|
||||
<&bias_pll_ubi_nc_clk>,
|
||||
<0>,
|
||||
<0>,
|
||||
<0>,
|
||||
<0>,
|
||||
@@ -142,6 +239,17 @@
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
|
||||
tcsr_mutex: hwlock@1905000 {
|
||||
compatible = "qcom,tcsr-mutex";
|
||||
reg = <0x01905000 0x20000>;
|
||||
#hwlock-cells = <1>;
|
||||
};
|
||||
|
||||
tcsr: syscon@1937000 {
|
||||
compatible = "qcom,tcsr-ipq9574", "syscon";
|
||||
reg = <0x01937000 0x21000>;
|
||||
};
|
||||
|
||||
sdhc_1: mmc@7804000 {
|
||||
compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
|
||||
reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
|
||||
@@ -159,6 +267,36 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp_dma: dma-controller@7884000 {
|
||||
compatible = "qcom,bam-v1.7.0";
|
||||
reg = <0x07884000 0x2b000>;
|
||||
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
#dma-cells = <1>;
|
||||
qcom,ee = <0>;
|
||||
};
|
||||
|
||||
blsp1_uart0: serial@78af000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x078af000 0x200>;
|
||||
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_uart1: serial@78b0000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x078b0000 0x200>;
|
||||
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_uart2: serial@78b1000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x078b1000 0x200>;
|
||||
@@ -169,17 +307,174 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_uart3: serial@78b2000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x078b2000 0x200>;
|
||||
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_uart4: serial@78b3000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x078b3000 0x200>;
|
||||
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_uart5: serial@78b4000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x078b4000 0x200>;
|
||||
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_spi0: spi@78b5000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x078b5000 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp_dma 12>, <&blsp_dma 13>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_i2c1: i2c@78b6000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
reg = <0x078b6000 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp_dma 14>, <&blsp_dma 15>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_spi1: spi@78b6000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x078b6000 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp_dma 14>, <&blsp_dma 15>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_i2c2: i2c@78b7000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
reg = <0x078b7000 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp_dma 16>, <&blsp_dma 17>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_spi2: spi@78b7000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x078b7000 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp_dma 16>, <&blsp_dma 17>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_i2c3: i2c@78b8000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
reg = <0x078b8000 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp_dma 18>, <&blsp_dma 19>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_spi3: spi@78b8000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x078b8000 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
||||
spi-max-frequency = <50000000>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp_dma 18>, <&blsp_dma 19>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_i2c4: i2c@78b9000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
reg = <0x078b9000 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp_dma 20>, <&blsp_dma 21>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_spi4: spi@78b9000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x078b9000 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp_dma 20>, <&blsp_dma 21>;
|
||||
dma-names = "tx", "rx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
intc: interrupt-controller@b000000 {
|
||||
compatible = "qcom,msm-qgic2";
|
||||
reg = <0x0b000000 0x1000>, /* GICD */
|
||||
<0x0b002000 0x1000>, /* GICC */
|
||||
<0x0b002000 0x2000>, /* GICC */
|
||||
<0x0b001000 0x1000>, /* GICH */
|
||||
<0x0b004000 0x1000>; /* GICV */
|
||||
<0x0b004000 0x2000>; /* GICV */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <3>;
|
||||
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
ranges = <0 0x0b00c000 0x3000>;
|
||||
|
||||
v2m0: v2m@0 {
|
||||
@@ -201,6 +496,32 @@
|
||||
};
|
||||
};
|
||||
|
||||
watchdog: watchdog@b017000 {
|
||||
compatible = "qcom,apss-wdt-ipq9574", "qcom,kpss-wdt";
|
||||
reg = <0x0b017000 0x1000>;
|
||||
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&sleep_clk>;
|
||||
timeout-sec = <30>;
|
||||
};
|
||||
|
||||
apcs_glb: mailbox@b111000 {
|
||||
compatible = "qcom,ipq9574-apcs-apps-global",
|
||||
"qcom,ipq6018-apcs-apps-global";
|
||||
reg = <0x0b111000 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
clocks = <&a73pll>, <&xo_board_clk>;
|
||||
clock-names = "pll", "xo";
|
||||
#mbox-cells = <1>;
|
||||
};
|
||||
|
||||
a73pll: clock@b116000 {
|
||||
compatible = "qcom,ipq9574-a73pll";
|
||||
reg = <0x0b116000 0x40>;
|
||||
#clock-cells = <0>;
|
||||
clocks = <&xo_board_clk>;
|
||||
clock-names = "xo";
|
||||
};
|
||||
|
||||
timer@b120000 {
|
||||
compatible = "arm,armv7-timer-mem";
|
||||
reg = <0x0b120000 0x1000>;
|
||||
|
||||
@@ -22,7 +22,9 @@
|
||||
chassis-type = "tablet";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -39,14 +41,14 @@
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
|
||||
id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
};
|
||||
@@ -58,7 +60,7 @@
|
||||
accelerometer@10 {
|
||||
compatible = "bosch,bmc150_accel";
|
||||
reg = <0x10>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
@@ -89,10 +91,10 @@
|
||||
compatible = "edt,edt-ft5406";
|
||||
reg = <0x38>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
|
||||
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&pm8916_l16>;
|
||||
iovcc-supply = <&pm8916_l6>;
|
||||
@@ -105,7 +107,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -114,6 +116,18 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l16: l16 {
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_vib {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -131,7 +145,7 @@
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
|
||||
|
||||
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>;
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
@@ -153,110 +167,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-system-load = <200000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
accel_int_default: accel-int-default-state {
|
||||
pins = "gpio115";
|
||||
function = "gpio";
|
||||
|
||||
@@ -13,7 +13,9 @@
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -30,7 +32,7 @@
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
@@ -42,7 +44,7 @@
|
||||
pinctrl-0 = <&gpio_leds_default>;
|
||||
|
||||
led-0 {
|
||||
gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "torch";
|
||||
function = LED_FUNCTION_TORCH;
|
||||
};
|
||||
@@ -50,13 +52,13 @@
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>;
|
||||
id-gpio = <&tlmm 69 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -66,9 +68,9 @@
|
||||
touchscreen@26 {
|
||||
compatible = "mstar,msg2638";
|
||||
reg = <0x26>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
|
||||
reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ts_int_reset_default>;
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
@@ -86,7 +88,7 @@
|
||||
reg = <0x0c>;
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vid-supply = <&pm8916_l6>;
|
||||
reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>;
|
||||
reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mag_reset_default>;
|
||||
mount-matrix = "0", "1", "0",
|
||||
@@ -99,7 +101,7 @@
|
||||
reg = <0x0f>;
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <31 IRQ_TYPE_EDGE_RISING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&accel_int_default>;
|
||||
@@ -111,7 +113,7 @@
|
||||
proximity@48 {
|
||||
compatible = "sensortek,stk3310";
|
||||
reg = <0x48>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&proximity_int_default>;
|
||||
@@ -122,7 +124,7 @@
|
||||
reg = <0x68>;
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <97 IRQ_TYPE_EDGE_RISING>,
|
||||
<98 IRQ_TYPE_EDGE_RISING>;
|
||||
pinctrl-names = "default";
|
||||
@@ -136,7 +138,7 @@
|
||||
led-controller@68 {
|
||||
compatible = "si-en,sn3190";
|
||||
reg = <0x68>;
|
||||
shutdown-gpios = <&msmgpio 89 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_enable_default &led_shutdown_default>;
|
||||
#address-cells = <1>;
|
||||
@@ -156,6 +158,13 @@
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_vib {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -175,7 +184,7 @@
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
|
||||
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
@@ -195,110 +204,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <200000>;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
accel_int_default: accel-int-default-state {
|
||||
pins = "gpio31";
|
||||
function = "gpio";
|
||||
|
||||
@@ -13,7 +13,9 @@
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -30,14 +32,14 @@
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
debounce-interval = <15>;
|
||||
};
|
||||
|
||||
button-volume-down {
|
||||
label = "Volume Down";
|
||||
gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
debounce-interval = <15>;
|
||||
};
|
||||
@@ -49,7 +51,7 @@
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
|
||||
gpio = <&msmgpio 87 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
startup-delay-us = <200>;
|
||||
@@ -60,7 +62,7 @@
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
|
||||
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
};
|
||||
@@ -76,7 +78,7 @@
|
||||
vdd-supply = <&pm8916_l8>;
|
||||
vid-supply = <&pm8916_l6>;
|
||||
|
||||
reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>;
|
||||
reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mag_reset_default>;
|
||||
@@ -86,7 +88,7 @@
|
||||
compatible = "invensense,mpu6515";
|
||||
reg = <0x68>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <36 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
@@ -108,10 +110,10 @@
|
||||
compatible = "edt,edt-ft5306";
|
||||
reg = <0x38>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
|
||||
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&pm8916_l11>;
|
||||
iovcc-supply = <&pm8916_l6>;
|
||||
@@ -124,10 +126,17 @@
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
status = "okay";
|
||||
|
||||
@@ -143,7 +152,7 @@
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
@@ -163,110 +172,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <200000>;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
gpio_keys_default: gpio-keys-default-state {
|
||||
pins = "gpio107", "gpio117";
|
||||
function = "gpio";
|
||||
|
||||
@@ -14,7 +14,9 @@
|
||||
chassis-type = "tablet";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -24,8 +26,8 @@
|
||||
flash-led-controller {
|
||||
/* Actually qcom,leds-gpio-flash */
|
||||
compatible = "sgmicro,sgm3140";
|
||||
enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
|
||||
flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
|
||||
flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-0 = <&camera_flash_default>;
|
||||
pinctrl-names = "default";
|
||||
@@ -45,7 +47,7 @@
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
@@ -59,21 +61,21 @@
|
||||
led-red {
|
||||
function = LED_FUNCTION_CHARGING;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&msmgpio 117 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
|
||||
retain-state-suspended;
|
||||
};
|
||||
|
||||
led-green {
|
||||
function = LED_FUNCTION_CHARGING;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&msmgpio 118 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>;
|
||||
retain-state-suspended;
|
||||
};
|
||||
};
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
|
||||
id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
@@ -87,10 +89,10 @@
|
||||
compatible = "edt,edt-ft5406";
|
||||
reg = <0x38>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
|
||||
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&pm8916_l17>;
|
||||
iovcc-supply = <&pm8916_l6>;
|
||||
@@ -105,7 +107,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -114,6 +116,13 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_vib {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -131,7 +140,7 @@
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
@@ -153,110 +162,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-system-load = <200000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
camera_flash_default: camera-flash-default-state {
|
||||
pins = "gpio31", "gpio32";
|
||||
function = "gpio";
|
||||
|
||||
@@ -26,7 +26,9 @@
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -43,7 +45,7 @@
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
@@ -55,21 +57,21 @@
|
||||
pinctrl-0 = <&gpio_leds_default>;
|
||||
|
||||
led-0 {
|
||||
gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 9 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
@@ -78,7 +80,7 @@
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>;
|
||||
id-gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
};
|
||||
@@ -94,7 +96,7 @@
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vid-supply = <&pm8916_l6>;
|
||||
|
||||
reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>;
|
||||
reset-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mag_reset_default>;
|
||||
@@ -104,7 +106,7 @@
|
||||
compatible = "kionix,kx023-1025";
|
||||
reg = <0x1e>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
@@ -122,7 +124,7 @@
|
||||
compatible = "avago,apds9930";
|
||||
reg = <0x39>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
@@ -146,7 +148,7 @@
|
||||
regulator-name = "outp";
|
||||
regulator-min-microvolt = <5400000>;
|
||||
regulator-max-microvolt = <5400000>;
|
||||
enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&tlmm 97 GPIO_ACTIVE_HIGH>;
|
||||
regulator-active-discharge = <1>;
|
||||
};
|
||||
|
||||
@@ -154,7 +156,7 @@
|
||||
regulator-name = "outn";
|
||||
regulator-min-microvolt = <5400000>;
|
||||
regulator-max-microvolt = <5400000>;
|
||||
enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
||||
regulator-active-discharge = <1>;
|
||||
};
|
||||
};
|
||||
@@ -169,7 +171,7 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
@@ -199,18 +201,18 @@
|
||||
compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
|
||||
reg = <0x28>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
|
||||
firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
|
||||
firmware-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nfc_default>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -218,11 +220,40 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpass_codec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_codec {
|
||||
status = "okay";
|
||||
qcom,micbias-lvl = <2800>;
|
||||
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
||||
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
||||
qcom,hphl-jack-type-normally-open;
|
||||
};
|
||||
|
||||
&pm8916_l8 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
&pm8916_resin {
|
||||
status = "okay";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l16: l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_vib {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -243,7 +274,7 @@
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>;
|
||||
|
||||
/*
|
||||
* The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>.
|
||||
* The Huawei device tree sets cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>.
|
||||
* However, gpio38 does not change its state when inserting/removing the
|
||||
* SD card, it's just low all the time. The Huawei kernel seems to use
|
||||
* polling for SD card detection instead.
|
||||
@@ -255,7 +286,7 @@
|
||||
* Maybe Huawei decided to replace the second SIM card slot with the
|
||||
* SD card slot and forgot to re-route to gpio38.
|
||||
*/
|
||||
cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&sound {
|
||||
@@ -277,7 +308,7 @@
|
||||
sound-dai = <&lpass MI2S_PRIMARY>;
|
||||
};
|
||||
codec {
|
||||
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
|
||||
sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -287,7 +318,7 @@
|
||||
sound-dai = <&lpass MI2S_TERTIARY>;
|
||||
};
|
||||
codec {
|
||||
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
|
||||
sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -301,13 +332,6 @@
|
||||
extcon = <&usb_id>;
|
||||
};
|
||||
|
||||
&wcd_codec {
|
||||
qcom,micbias-lvl = <2800>;
|
||||
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
||||
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
||||
qcom,hphl-jack-type-normally-open;
|
||||
};
|
||||
|
||||
&wcnss {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -316,110 +340,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <200000>;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
accel_irq_default: accel-irq-default-state {
|
||||
pins = "gpio115";
|
||||
function = "gpio";
|
||||
|
||||
@@ -14,7 +14,9 @@
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -41,7 +43,7 @@
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
@@ -53,7 +55,7 @@
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
|
||||
gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -62,8 +64,8 @@
|
||||
|
||||
flash-led-controller {
|
||||
compatible = "sgmicro,sgm3140";
|
||||
flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
|
||||
flash-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&camera_flash_default>;
|
||||
@@ -122,7 +124,7 @@
|
||||
* to the BMC156. However, there are two pads next to the chip
|
||||
* that can be shorted to make it work if needed.
|
||||
*
|
||||
* interrupt-parent = <&msmgpio>;
|
||||
* interrupt-parent = <&tlmm>;
|
||||
* interrupts = <116 IRQ_TYPE_EDGE_RISING>;
|
||||
*/
|
||||
|
||||
@@ -141,7 +143,7 @@
|
||||
compatible = "bosch,bmc156_magn";
|
||||
reg = <0x12>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <113 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -156,7 +158,7 @@
|
||||
reg = <0x23>;
|
||||
proximity-near-level = <75>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -170,7 +172,7 @@
|
||||
compatible = "bosch,bmg160";
|
||||
reg = <0x68>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <23 IRQ_TYPE_EDGE_RISING>,
|
||||
<22 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
@@ -191,7 +193,7 @@
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
vdd-supply = <®_ctp>;
|
||||
@@ -214,7 +216,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -223,6 +225,13 @@
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_usbin {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -267,110 +276,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <200000>;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
accel_int_default: accel-int-default-state {
|
||||
pins = "gpio116";
|
||||
function = "gpio";
|
||||
|
||||
@@ -13,13 +13,30 @@
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0";
|
||||
};
|
||||
|
||||
flash-led-controller {
|
||||
compatible = "ocs,ocp8110";
|
||||
enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
|
||||
flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-0 = <&camera_front_flash_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
flash_led: led {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
flash-max-timeout-us = <250000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
@@ -30,7 +47,7 @@
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
@@ -39,7 +56,7 @@
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_KBD_BACKLIGHT;
|
||||
@@ -51,7 +68,7 @@
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
|
||||
id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
};
|
||||
@@ -67,7 +84,7 @@
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vid-supply = <&pm8916_l6>;
|
||||
|
||||
reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
|
||||
reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mag_reset_default>;
|
||||
@@ -86,7 +103,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -95,6 +112,13 @@
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_vib {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -114,7 +138,7 @@
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
|
||||
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
@@ -134,110 +158,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <200000>;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
button_backlight_default: button-backlight-default-state {
|
||||
pins = "gpio17";
|
||||
function = "gpio";
|
||||
@@ -246,6 +167,13 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
camera_front_flash_default: camera-front-flash-default-state {
|
||||
pins = "gpio49", "gpio119";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
gpio_keys_default: gpio-keys-default-state {
|
||||
pins = "gpio107";
|
||||
function = "gpio";
|
||||
|
||||
@@ -12,7 +12,7 @@
|
||||
compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
serial0 = &blsp_uart2;
|
||||
usid0 = &pm8916_0;
|
||||
};
|
||||
|
||||
@@ -21,6 +21,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -3,9 +3,9 @@
|
||||
* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
|
||||
*/
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
|
||||
blsp1_uart1_default: blsp1-uart1-default-state {
|
||||
blsp_uart1_default: blsp-uart1-default-state {
|
||||
/* TX, RX, CTS_N, RTS_N */
|
||||
pins = "gpio0", "gpio1", "gpio2", "gpio3";
|
||||
function = "blsp_uart1";
|
||||
@@ -14,7 +14,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp1_uart1_sleep: blsp1-uart1-sleep-state {
|
||||
blsp_uart1_sleep: blsp-uart1-sleep-state {
|
||||
pins = "gpio0", "gpio1", "gpio2", "gpio3";
|
||||
function = "gpio";
|
||||
|
||||
@@ -22,7 +22,7 @@
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
blsp1_uart2_default: blsp1-uart2-default-state {
|
||||
blsp_uart2_default: blsp-uart2-default-state {
|
||||
pins = "gpio4", "gpio5";
|
||||
function = "blsp_uart2";
|
||||
|
||||
@@ -30,7 +30,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp1_uart2_sleep: blsp1-uart2-sleep-state {
|
||||
blsp_uart2_sleep: blsp-uart2-sleep-state {
|
||||
pins = "gpio4", "gpio5";
|
||||
function = "gpio";
|
||||
|
||||
@@ -38,7 +38,7 @@
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
spi1_default: spi1-default-state {
|
||||
blsp_spi1_default: blsp-spi1-default-state {
|
||||
spi-pins {
|
||||
pins = "gpio0", "gpio1", "gpio3";
|
||||
function = "blsp_spi1";
|
||||
@@ -56,7 +56,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
spi1_sleep: spi1-sleep-state {
|
||||
blsp_spi1_sleep: blsp-spi1-sleep-state {
|
||||
pins = "gpio0", "gpio1", "gpio2", "gpio3";
|
||||
function = "gpio";
|
||||
|
||||
@@ -64,7 +64,7 @@
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
spi2_default: spi2-default-state {
|
||||
blsp_spi2_default: blsp-spi2-default-state {
|
||||
spi-pins {
|
||||
pins = "gpio4", "gpio5", "gpio7";
|
||||
function = "blsp_spi2";
|
||||
@@ -82,7 +82,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
spi2_sleep: spi2-sleep-state {
|
||||
blsp_spi2_sleep: blsp-spi2-sleep-state {
|
||||
pins = "gpio4", "gpio5", "gpio6", "gpio7";
|
||||
function = "gpio";
|
||||
|
||||
@@ -90,7 +90,7 @@
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
spi3_default: spi3-default-state {
|
||||
blsp_spi3_default: blsp-spi3-default-state {
|
||||
spi-pins {
|
||||
pins = "gpio8", "gpio9", "gpio11";
|
||||
function = "blsp_spi3";
|
||||
@@ -108,7 +108,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
spi3_sleep: spi3-sleep-state {
|
||||
blsp_spi3_sleep: blsp-spi3-sleep-state {
|
||||
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
||||
function = "gpio";
|
||||
|
||||
@@ -116,7 +116,7 @@
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
spi4_default: spi4-default-state {
|
||||
blsp_spi4_default: blsp-spi4-default-state {
|
||||
spi-pins {
|
||||
pins = "gpio12", "gpio13", "gpio15";
|
||||
function = "blsp_spi4";
|
||||
@@ -134,7 +134,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
spi4_sleep: spi4-sleep-state {
|
||||
blsp_spi4_sleep: blsp-spi4-sleep-state {
|
||||
pins = "gpio12", "gpio13", "gpio14", "gpio15";
|
||||
function = "gpio";
|
||||
|
||||
@@ -142,7 +142,7 @@
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
spi5_default: spi5-default-state {
|
||||
blsp_spi5_default: blsp-spi5-default-state {
|
||||
spi-pins {
|
||||
pins = "gpio16", "gpio17", "gpio19";
|
||||
function = "blsp_spi5";
|
||||
@@ -160,7 +160,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
spi5_sleep: spi5-sleep-state {
|
||||
blsp_spi5_sleep: blsp-spi5-sleep-state {
|
||||
pins = "gpio16", "gpio17", "gpio18", "gpio19";
|
||||
function = "gpio";
|
||||
|
||||
@@ -168,7 +168,7 @@
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
spi6_default: spi6-default-state {
|
||||
blsp_spi6_default: blsp-spi6-default-state {
|
||||
spi-pins {
|
||||
pins = "gpio20", "gpio21", "gpio23";
|
||||
function = "blsp_spi6";
|
||||
@@ -186,7 +186,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
spi6_sleep: spi6-sleep-state {
|
||||
blsp_spi6_sleep: blsp-spi6-sleep-state {
|
||||
pins = "gpio20", "gpio21", "gpio22", "gpio23";
|
||||
function = "gpio";
|
||||
|
||||
@@ -194,7 +194,7 @@
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
i2c1_default: i2c1-default-state {
|
||||
blsp_i2c1_default: blsp-i2c1-default-state {
|
||||
pins = "gpio2", "gpio3";
|
||||
function = "blsp_i2c1";
|
||||
|
||||
@@ -202,7 +202,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c1_sleep: i2c1-sleep-state {
|
||||
blsp_i2c1_sleep: blsp-i2c1-sleep-state {
|
||||
pins = "gpio2", "gpio3";
|
||||
function = "gpio";
|
||||
|
||||
@@ -210,7 +210,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c2_default: i2c2-default-state {
|
||||
blsp_i2c2_default: blsp-i2c2-default-state {
|
||||
pins = "gpio6", "gpio7";
|
||||
function = "blsp_i2c2";
|
||||
|
||||
@@ -218,7 +218,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c2_sleep: i2c2-sleep-state {
|
||||
blsp_i2c2_sleep: blsp-i2c2-sleep-state {
|
||||
pins = "gpio6", "gpio7";
|
||||
function = "gpio";
|
||||
|
||||
@@ -226,7 +226,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c3_default: i2c3-default-state {
|
||||
blsp_i2c3_default: blsp-i2c3-default-state {
|
||||
pins = "gpio10", "gpio11";
|
||||
function = "blsp_i2c3";
|
||||
|
||||
@@ -234,7 +234,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c3_sleep: i2c3-sleep-state {
|
||||
blsp_i2c3_sleep: blsp-i2c3-sleep-state {
|
||||
pins = "gpio10", "gpio11";
|
||||
function = "gpio";
|
||||
|
||||
@@ -242,7 +242,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c4_default: i2c4-default-state {
|
||||
blsp_i2c4_default: blsp-i2c4-default-state {
|
||||
pins = "gpio14", "gpio15";
|
||||
function = "blsp_i2c4";
|
||||
|
||||
@@ -250,7 +250,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c4_sleep: i2c4-sleep-state {
|
||||
blsp_i2c4_sleep: blsp-i2c4-sleep-state {
|
||||
pins = "gpio14", "gpio15";
|
||||
function = "gpio";
|
||||
|
||||
@@ -258,7 +258,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c5_default: i2c5-default-state {
|
||||
blsp_i2c5_default: blsp-i2c5-default-state {
|
||||
pins = "gpio18", "gpio19";
|
||||
function = "blsp_i2c5";
|
||||
|
||||
@@ -266,7 +266,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c5_sleep: i2c5-sleep-state {
|
||||
blsp_i2c5_sleep: blsp-i2c5-sleep-state {
|
||||
pins = "gpio18", "gpio19";
|
||||
function = "gpio";
|
||||
|
||||
@@ -274,7 +274,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c6_default: i2c6-default-state {
|
||||
blsp_i2c6_default: blsp-i2c6-default-state {
|
||||
pins = "gpio22", "gpio23";
|
||||
function = "blsp_i2c6";
|
||||
|
||||
@@ -282,7 +282,7 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c6_sleep: i2c6-sleep-state {
|
||||
blsp_i2c6_sleep: blsp-i2c6-sleep-state {
|
||||
pins = "gpio22", "gpio23";
|
||||
function = "gpio";
|
||||
|
||||
|
||||
@@ -1,4 +1,12 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* msm8916-pm8916.dtsi describes common properties (e.g. regulator connections)
|
||||
* that apply to most devices that make use of the MSM8916 SoC and PM8916 PMIC.
|
||||
* Many regulators have a fixed purpose in the original reference design and
|
||||
* were rarely re-used for different purposes. Devices that deviate from the
|
||||
* typical reference design should not make use of this include and instead add
|
||||
* the necessary properties in the board-specific device tree.
|
||||
*/
|
||||
|
||||
#include "msm8916.dtsi"
|
||||
#include "pm8916.dtsi"
|
||||
@@ -7,12 +15,12 @@
|
||||
vdda-supply = <&pm8916_l2>;
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
&mdss_dsi0 {
|
||||
vdda-supply = <&pm8916_l2>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
};
|
||||
|
||||
&dsi_phy0 {
|
||||
&mdss_dsi0_phy {
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
};
|
||||
|
||||
@@ -20,6 +28,12 @@
|
||||
pll-supply = <&pm8916_l7>;
|
||||
};
|
||||
|
||||
&pm8916_codec {
|
||||
vdd-cdc-io-supply = <&pm8916_l5>;
|
||||
vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
|
||||
vdd-micbias-supply = <&pm8916_l13>;
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
vmmc-supply = <&pm8916_l8>;
|
||||
vqmmc-supply = <&pm8916_l5>;
|
||||
@@ -47,30 +61,97 @@
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
smd_rpm_regulators: regulators {
|
||||
pm8916_rpm_regulators: regulators {
|
||||
compatible = "qcom,rpm-pm8916-regulators";
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
/* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
|
||||
pm8916_s3: s3 {};
|
||||
pm8916_s4: s4 {};
|
||||
|
||||
pm8916_l1: l1 {};
|
||||
pm8916_l2: l2 {};
|
||||
pm8916_s3: s3 {
|
||||
regulator-min-microvolt = <1250000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on; /* Needed for L2 */
|
||||
};
|
||||
|
||||
pm8916_s4: s4 {
|
||||
regulator-min-microvolt = <1850000>;
|
||||
regulator-max-microvolt = <2150000>;
|
||||
regulator-always-on; /* Needed for L5/L7 */
|
||||
};
|
||||
|
||||
/*
|
||||
* Some of the regulators are unused or managed by another
|
||||
* processor (e.g. the modem). We should still define nodes for
|
||||
* them to ensure the vote from the application processor can be
|
||||
* dropped in case the regulators are already on during boot.
|
||||
*
|
||||
* The labels for these nodes are omitted on purpose because
|
||||
* boards should configure a proper voltage before using them.
|
||||
*/
|
||||
l1 {};
|
||||
|
||||
pm8916_l2: l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on; /* Needed for LPDDR RAM */
|
||||
};
|
||||
|
||||
/* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */
|
||||
pm8916_l4: l4 {};
|
||||
pm8916_l5: l5 {};
|
||||
pm8916_l6: l6 {};
|
||||
pm8916_l7: l7 {};
|
||||
pm8916_l8: l8 {};
|
||||
pm8916_l9: l9 {};
|
||||
pm8916_l10: l10 {};
|
||||
pm8916_l11: l11 {};
|
||||
pm8916_l12: l12 {};
|
||||
pm8916_l13: l13 {};
|
||||
pm8916_l14: l14 {};
|
||||
pm8916_l15: l15 {};
|
||||
pm8916_l16: l16 {};
|
||||
pm8916_l17: l17 {};
|
||||
pm8916_l18: l18 {};
|
||||
|
||||
l4 {};
|
||||
|
||||
pm8916_l5: l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on; /* Needed for most digital I/O */
|
||||
};
|
||||
|
||||
pm8916_l6: l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8916_l7: l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on; /* Needed for CPU PLL */
|
||||
};
|
||||
|
||||
pm8916_l8: l8 {
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
pm8916_l9: l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {};
|
||||
|
||||
pm8916_l11: l11 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <200000>;
|
||||
};
|
||||
|
||||
pm8916_l12: l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
pm8916_l13: l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {};
|
||||
l15 {};
|
||||
l16 {};
|
||||
l17 {};
|
||||
l18 {};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -8,7 +8,9 @@
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -44,13 +46,13 @@
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
|
||||
button-home {
|
||||
label = "Home";
|
||||
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_HOMEPAGE>;
|
||||
};
|
||||
};
|
||||
@@ -65,7 +67,7 @@
|
||||
|
||||
event-hall-sensor {
|
||||
label = "Hall Effect Sensor";
|
||||
gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
linux,can-disable;
|
||||
@@ -83,7 +85,7 @@
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -96,7 +98,7 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -105,8 +107,8 @@
|
||||
|
||||
i2c-muic {
|
||||
compatible = "i2c-gpio";
|
||||
sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&muic_i2c_default>;
|
||||
@@ -118,7 +120,7 @@
|
||||
compatible = "siliconmitus,sm5502-muic";
|
||||
|
||||
reg = <0x25>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -128,8 +130,8 @@
|
||||
|
||||
i2c-tkey {
|
||||
compatible = "i2c-gpio";
|
||||
sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tkey_i2c_default>;
|
||||
@@ -142,7 +144,7 @@
|
||||
compatible = "coreriver,tc360-touchkey";
|
||||
reg = <0x20>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
/* vcc/vdd-supply are board-specific */
|
||||
@@ -157,8 +159,8 @@
|
||||
|
||||
i2c-nfc {
|
||||
compatible = "i2c-gpio";
|
||||
sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nfc_i2c_default>;
|
||||
@@ -170,11 +172,11 @@
|
||||
compatible = "samsung,s3fwrn5-i2c";
|
||||
reg = <0x27>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
en-gpios = <&msmgpio 20 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
|
||||
en-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
|
||||
wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
|
||||
|
||||
@@ -200,7 +202,7 @@
|
||||
accelerometer: accelerometer@10 {
|
||||
compatible = "bosch,bmc150_accel";
|
||||
reg = <0x10>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
@@ -225,7 +227,7 @@
|
||||
battery@35 {
|
||||
compatible = "richtek,rt5033-battery";
|
||||
reg = <0x35>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -233,25 +235,32 @@
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&mdss_default>;
|
||||
pinctrl-1 = <&mdss_sleep>;
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_dsi0 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&mdss_default>;
|
||||
pinctrl-1 = <&mdss_sleep>;
|
||||
};
|
||||
|
||||
&pm8916_resin {
|
||||
status = "okay";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
status = "okay";
|
||||
|
||||
@@ -267,7 +276,7 @@
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
|
||||
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
@@ -279,110 +288,7 @@
|
||||
extcon = <&muic>;
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <200000>;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
accel_int_default: accel-int-default-state {
|
||||
pins = "gpio115";
|
||||
function = "gpio";
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
gpio = <&msmgpio 9 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -28,7 +28,7 @@
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
|
||||
gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -41,7 +41,7 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -67,7 +67,7 @@
|
||||
compatible = "zinitix,bt541";
|
||||
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
touchscreen-size-x = <540>;
|
||||
@@ -85,7 +85,7 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
&mdss_dsi0 {
|
||||
panel@0 {
|
||||
reg = <0>;
|
||||
|
||||
@@ -93,17 +93,17 @@
|
||||
|
||||
vdd3-supply = <®_panel_vdd3>;
|
||||
vci-supply = <&pm8916_l17>;
|
||||
reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&dsi0_out>;
|
||||
remote-endpoint = <&mdss_dsi0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi0_out {
|
||||
&mdss_dsi0_out {
|
||||
data-lanes = <0 1>;
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
@@ -120,7 +120,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
panel_vdd3_default: panel-vdd3-default-state {
|
||||
pins = "gpio9";
|
||||
function = "gpio";
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -36,7 +36,7 @@
|
||||
compatible = "melfas,mms345l";
|
||||
|
||||
reg = <0x48>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
touchscreen-size-x = <720>;
|
||||
@@ -71,7 +71,7 @@
|
||||
compatible = "qcom,wcn3660b";
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
tkey_en_default: tkey-en-default-state {
|
||||
pins = "gpio97";
|
||||
function = "gpio";
|
||||
|
||||
@@ -18,7 +18,7 @@
|
||||
compatible = "siliconmitus,sm5504-muic";
|
||||
reg = <0x14>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -32,7 +32,7 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -66,7 +66,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
tkey_en_default: tkey-en-default-state {
|
||||
pins = "gpio97";
|
||||
function = "gpio";
|
||||
|
||||
@@ -33,7 +33,7 @@
|
||||
function = LED_FUNCTION_KBD_BACKLIGHT;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
|
||||
gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_leds_default>;
|
||||
@@ -42,14 +42,14 @@
|
||||
};
|
||||
|
||||
®_motor_vdd {
|
||||
gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
®_touch_key {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
gpio_leds_default: gpio-led-default-state {
|
||||
pins = "gpio60";
|
||||
function = "gpio";
|
||||
|
||||
@@ -9,7 +9,9 @@
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -34,13 +36,13 @@
|
||||
|
||||
volume-up-button {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
|
||||
home-button {
|
||||
label = "Home";
|
||||
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_HOMEPAGE>;
|
||||
};
|
||||
};
|
||||
@@ -55,7 +57,7 @@
|
||||
|
||||
hall-sensor-switch {
|
||||
label = "Hall Effect Sensor";
|
||||
gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
linux,can-disable;
|
||||
@@ -74,7 +76,7 @@
|
||||
maxim,over-heat-temp = <600>;
|
||||
maxim,over-volt = <4400>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-0 = <&fuelgauge_int_default>;
|
||||
@@ -97,7 +99,7 @@
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l5>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "INT1";
|
||||
|
||||
@@ -111,7 +113,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -120,6 +122,13 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* FIXME: Replace with MAX77849 MUIC when driver is available */
|
||||
&pm8916_usbin {
|
||||
status = "okay";
|
||||
@@ -138,7 +147,7 @@
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
@@ -162,110 +171,7 @@
|
||||
compatible = "qcom,wcn3660b";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-system-load = <200000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
accel_int_default: accel-int-default-state {
|
||||
pins = "gpio115";
|
||||
function = "gpio";
|
||||
|
||||
@@ -25,7 +25,7 @@
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
|
||||
gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&motor_en_default>;
|
||||
@@ -38,7 +38,7 @@
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&tsp_en_default>;
|
||||
@@ -51,7 +51,7 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
@@ -71,20 +71,20 @@
|
||||
touchscreen@4a {
|
||||
compatible = "atmel,maxtouch";
|
||||
reg = <0x4a>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
vdd-supply = <®_tsp_1p8v>;
|
||||
vdda-supply = <®_tsp_3p3v>;
|
||||
|
||||
reset-gpios = <&msmgpio 114 GPIO_ACTIVE_LOW>;
|
||||
reset-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-0 = <&tsp_int_rst_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
motor_en_default: motor-en-default-state {
|
||||
pins = "gpio76";
|
||||
function = "gpio";
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <®_tsp_en_default>;
|
||||
@@ -24,7 +24,7 @@
|
||||
|
||||
vibrator {
|
||||
compatible = "gpio-vibrator";
|
||||
enable-gpios = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-0 = <&vibrator_en_default>;
|
||||
pinctrl-names = "default";
|
||||
@@ -37,7 +37,7 @@
|
||||
touchscreen@20 {
|
||||
compatible = "zinitix,bt532";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
touchscreen-size-x = <768>;
|
||||
@@ -51,7 +51,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
reg_tsp_en_default: reg-tsp-en-default-state {
|
||||
pins = "gpio73";
|
||||
function = "gpio";
|
||||
|
||||
@@ -7,7 +7,9 @@
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -32,7 +34,7 @@
|
||||
|
||||
event-hall-sensor {
|
||||
label = "Hall Effect Sensor";
|
||||
gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
linux,can-disable;
|
||||
@@ -49,21 +51,21 @@
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
|
||||
button-home {
|
||||
label = "Home Key";
|
||||
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_HOMEPAGE>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_muic: i2c-muic {
|
||||
compatible = "i2c-gpio";
|
||||
sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&muic_i2c_default>;
|
||||
@@ -75,7 +77,7 @@
|
||||
compatible = "siliconmitus,sm5703-muic";
|
||||
reg = <0x25>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -84,7 +86,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -108,7 +110,7 @@
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
|
||||
cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
@@ -128,110 +130,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <200000>;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
|
||||
pins = "gpio52";
|
||||
function = "gpio";
|
||||
|
||||
@@ -28,7 +28,9 @@
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -53,13 +55,13 @@
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
|
||||
button-home {
|
||||
label = "Home";
|
||||
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_HOMEPAGE>;
|
||||
};
|
||||
};
|
||||
@@ -74,7 +76,7 @@
|
||||
|
||||
event-hall-sensor {
|
||||
label = "Hall Effect Sensor";
|
||||
gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
linux,can-disable;
|
||||
@@ -87,7 +89,7 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -100,7 +102,7 @@
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
|
||||
gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -113,7 +115,7 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -122,8 +124,8 @@
|
||||
|
||||
i2c-muic {
|
||||
compatible = "i2c-gpio";
|
||||
sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&muic_i2c_default>;
|
||||
@@ -135,7 +137,7 @@
|
||||
compatible = "siliconmitus,sm5504-muic";
|
||||
reg = <0x14>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -145,8 +147,8 @@
|
||||
|
||||
i2c-tkey {
|
||||
compatible = "i2c-gpio";
|
||||
sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tkey_i2c_default>;
|
||||
@@ -158,7 +160,7 @@
|
||||
compatible = "coreriver,tc360-touchkey";
|
||||
reg = <0x20>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
vcc-supply = <®_touch_key>;
|
||||
@@ -174,8 +176,8 @@
|
||||
|
||||
i2c-nfc {
|
||||
compatible = "i2c-gpio";
|
||||
sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nfc_i2c_default>;
|
||||
@@ -187,11 +189,11 @@
|
||||
compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
|
||||
reg = <0x2b>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
|
||||
firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
|
||||
firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nfc_default>;
|
||||
@@ -206,7 +208,7 @@
|
||||
compatible = "st,lsm6ds3";
|
||||
reg = <0x6b>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -230,7 +232,7 @@
|
||||
compatible = "richtek,rt5033-battery";
|
||||
reg = <0x35>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
@@ -245,7 +247,7 @@
|
||||
compatible = "zinitix,bt541";
|
||||
reg = <0x20>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
touchscreen-size-x = <540>;
|
||||
@@ -259,7 +261,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -320,110 +322,7 @@
|
||||
compatible = "qcom,wcn3660b";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <200000>;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
fg_alert_default: fg-alert-default-state {
|
||||
pins = "gpio121";
|
||||
function = "gpio";
|
||||
|
||||
@@ -10,19 +10,19 @@
|
||||
};
|
||||
|
||||
&button_restart {
|
||||
gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&led_r {
|
||||
gpios = <&msmgpio 82 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&led_g {
|
||||
gpios = <&msmgpio 83 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&led_b {
|
||||
gpios = <&msmgpio 81 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&button_default {
|
||||
|
||||
@@ -10,19 +10,19 @@
|
||||
};
|
||||
|
||||
&button_restart {
|
||||
gpios = <&msmgpio 37 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&led_r {
|
||||
gpios = <&msmgpio 22 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&led_g {
|
||||
gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&led_b {
|
||||
gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&mpss {
|
||||
@@ -40,7 +40,7 @@
|
||||
};
|
||||
|
||||
/* This selects the external SIM card slot by default */
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
sim_ctrl_default: sim-ctrl-default-state {
|
||||
esim-sel-pins {
|
||||
pins = "gpio0", "gpio3";
|
||||
|
||||
@@ -9,7 +9,8 @@
|
||||
chassis-type = "embedded";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -82,11 +83,11 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* Remove &dsi_phy0 from clocks to make sure that gcc probes with display disabled */
|
||||
/* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */
|
||||
&gcc {
|
||||
clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>;
|
||||
};
|
||||
@@ -109,7 +110,7 @@
|
||||
|
||||
&usb {
|
||||
extcon = <&pm8916_usbin>;
|
||||
dr_mode = "peripheral";
|
||||
usb-role-switch;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
@@ -126,110 +127,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-system-load = <200000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
/* pins are board-specific */
|
||||
button_default: button-default-state {
|
||||
function = "gpio";
|
||||
|
||||
@@ -16,7 +16,9 @@
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -25,8 +27,8 @@
|
||||
|
||||
flash-led-controller {
|
||||
compatible = "ocs,ocp8110";
|
||||
enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
|
||||
flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
|
||||
flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&camera_flash_default>;
|
||||
@@ -47,14 +49,14 @@
|
||||
|
||||
button-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
|
||||
id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
};
|
||||
@@ -67,7 +69,7 @@
|
||||
compatible = "invensense,mpu6880";
|
||||
reg = <0x68>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
@@ -90,10 +92,10 @@
|
||||
compatible = "edt,edt-ft5506";
|
||||
reg = <0x38>;
|
||||
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
reset-gpios = <&msmgpio 12 GPIO_ACTIVE_LOW>;
|
||||
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&pm8916_l17>;
|
||||
iovcc-supply = <&pm8916_l6>;
|
||||
@@ -140,7 +142,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
&blsp_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -149,6 +151,22 @@
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l16: l16 {
|
||||
/*
|
||||
* L16 is only used for AW2013 which is fine with 2.5-3.3V.
|
||||
* Use the recommended typical voltage of 2.8V as minimum.
|
||||
*/
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_vib {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -188,110 +206,7 @@
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
l1 {
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l10 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
l11 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-allow-set-load;
|
||||
regulator-system-load = <200000>;
|
||||
};
|
||||
|
||||
l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l16 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
&tlmm {
|
||||
camera_flash_default: camera-flash-default-state {
|
||||
pins = "gpio31", "gpio32";
|
||||
function = "gpio";
|
||||
|
||||
@@ -10,19 +10,19 @@
|
||||
};
|
||||
|
||||
&button_restart {
|
||||
gpios = <&msmgpio 23 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&led_r {
|
||||
gpios = <&msmgpio 7 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&led_g {
|
||||
gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&led_b {
|
||||
gpios = <&msmgpio 6 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&button_default {
|
||||
|
||||
@@ -18,11 +18,6 @@
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhc_1; /* SDC1 eMMC slot */
|
||||
mmc1 = &sdhc_2; /* SDC2 SD card slot */
|
||||
};
|
||||
|
||||
chosen { };
|
||||
|
||||
memory@80000000 {
|
||||
@@ -992,12 +987,12 @@
|
||||
};
|
||||
};
|
||||
|
||||
msmgpio: pinctrl@1000000 {
|
||||
tlmm: pinctrl@1000000 {
|
||||
compatible = "qcom,msm8916-pinctrl";
|
||||
reg = <0x01000000 0x300000>;
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&msmgpio 0 0 122>;
|
||||
gpio-ranges = <&tlmm 0 0 122>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
@@ -1011,8 +1006,8 @@
|
||||
reg = <0x01800000 0x80000>;
|
||||
clocks = <&xo_board>,
|
||||
<&sleep_clk>,
|
||||
<&dsi_phy0 1>,
|
||||
<&dsi_phy0 0>,
|
||||
<&mdss_dsi0_phy 1>,
|
||||
<&mdss_dsi0_phy 0>,
|
||||
<0>,
|
||||
<0>,
|
||||
<0>;
|
||||
@@ -1061,7 +1056,7 @@
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
mdp: display-controller@1a01000 {
|
||||
mdss_mdp: display-controller@1a01000 {
|
||||
compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
|
||||
reg = <0x01a01000 0x89000>;
|
||||
reg-names = "mdp_phys";
|
||||
@@ -1086,14 +1081,14 @@
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
mdp5_intf1_out: endpoint {
|
||||
remote-endpoint = <&dsi0_in>;
|
||||
mdss_mdp_intf1_out: endpoint {
|
||||
remote-endpoint = <&mdss_dsi0_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dsi0: dsi@1a98000 {
|
||||
mdss_dsi0: dsi@1a98000 {
|
||||
compatible = "qcom,msm8916-dsi-ctrl",
|
||||
"qcom,mdss-dsi-ctrl";
|
||||
reg = <0x01a98000 0x25c>;
|
||||
@@ -1104,8 +1099,8 @@
|
||||
|
||||
assigned-clocks = <&gcc BYTE0_CLK_SRC>,
|
||||
<&gcc PCLK0_CLK_SRC>;
|
||||
assigned-clock-parents = <&dsi_phy0 0>,
|
||||
<&dsi_phy0 1>;
|
||||
assigned-clock-parents = <&mdss_dsi0_phy 0>,
|
||||
<&mdss_dsi0_phy 1>;
|
||||
|
||||
clocks = <&gcc GCC_MDSS_MDP_CLK>,
|
||||
<&gcc GCC_MDSS_AHB_CLK>,
|
||||
@@ -1119,7 +1114,7 @@
|
||||
"byte",
|
||||
"pixel",
|
||||
"core";
|
||||
phys = <&dsi_phy0>;
|
||||
phys = <&mdss_dsi0_phy>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
@@ -1130,20 +1125,20 @@
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
dsi0_in: endpoint {
|
||||
remote-endpoint = <&mdp5_intf1_out>;
|
||||
mdss_dsi0_in: endpoint {
|
||||
remote-endpoint = <&mdss_mdp_intf1_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
dsi0_out: endpoint {
|
||||
mdss_dsi0_out: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dsi_phy0: phy@1a98300 {
|
||||
mdss_dsi0_phy: phy@1a98300 {
|
||||
compatible = "qcom,dsi-phy-28nm-lp";
|
||||
reg = <0x01a98300 0xd4>,
|
||||
<0x01a98500 0x280>,
|
||||
@@ -1161,7 +1156,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
camss: camss@1b00000 {
|
||||
camss: camss@1b0ac00 {
|
||||
compatible = "qcom,msm8916-camss";
|
||||
reg = <0x01b0ac00 0x200>,
|
||||
<0x01b00030 0x4>,
|
||||
@@ -1519,20 +1514,20 @@
|
||||
* Primary/Secondary MI2S both use the PRI_I2S_CLK.
|
||||
*/
|
||||
clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
|
||||
<&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
|
||||
<&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
|
||||
<&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
|
||||
<&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
|
||||
<&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
|
||||
<&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
|
||||
<&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
|
||||
<&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
|
||||
<&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
|
||||
|
||||
clock-names = "ahbix-clk",
|
||||
"pcnoc-mport-clk",
|
||||
"pcnoc-sway-clk",
|
||||
"mi2s-bit-clk0",
|
||||
"mi2s-bit-clk1",
|
||||
"mi2s-bit-clk2",
|
||||
"mi2s-bit-clk3";
|
||||
"mi2s-bit-clk3",
|
||||
"pcnoc-mport-clk",
|
||||
"pcnoc-sway-clk";
|
||||
#sound-dai-cells = <1>;
|
||||
|
||||
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@@ -1551,9 +1546,10 @@
|
||||
<&gcc GCC_CODEC_DIGCODEC_CLK>;
|
||||
clock-names = "ahbix-clk", "mclk";
|
||||
#sound-dai-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhc_1: mmc@7824000 {
|
||||
sdhc_1: mmc@7824900 {
|
||||
compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
|
||||
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
|
||||
reg-names = "hc", "core";
|
||||
@@ -1571,7 +1567,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhc_2: mmc@7864000 {
|
||||
sdhc_2: mmc@7864900 {
|
||||
compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
|
||||
reg = <0x07864900 0x11c>, <0x07864000 0x800>;
|
||||
reg-names = "hc", "core";
|
||||
@@ -1597,7 +1593,7 @@
|
||||
qcom,ee = <0>;
|
||||
};
|
||||
|
||||
blsp1_uart1: serial@78af000 {
|
||||
blsp_uart1: serial@78af000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x078af000 0x200>;
|
||||
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@@ -1606,12 +1602,12 @@
|
||||
dmas = <&blsp_dma 0>, <&blsp_dma 1>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&blsp1_uart1_default>;
|
||||
pinctrl-1 = <&blsp1_uart1_sleep>;
|
||||
pinctrl-0 = <&blsp_uart1_default>;
|
||||
pinctrl-1 = <&blsp_uart1_sleep>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_uart2: serial@78b0000 {
|
||||
blsp_uart2: serial@78b0000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x078b0000 0x200>;
|
||||
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@@ -1620,8 +1616,8 @@
|
||||
dmas = <&blsp_dma 2>, <&blsp_dma 3>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&blsp1_uart2_default>;
|
||||
pinctrl-1 = <&blsp1_uart2_sleep>;
|
||||
pinctrl-0 = <&blsp_uart2_default>;
|
||||
pinctrl-1 = <&blsp_uart2_sleep>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@@ -1635,8 +1631,8 @@
|
||||
dmas = <&blsp_dma 4>, <&blsp_dma 5>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c1_default>;
|
||||
pinctrl-1 = <&i2c1_sleep>;
|
||||
pinctrl-0 = <&blsp_i2c1_default>;
|
||||
pinctrl-1 = <&blsp_i2c1_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1652,8 +1648,8 @@
|
||||
dmas = <&blsp_dma 4>, <&blsp_dma 5>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&spi1_default>;
|
||||
pinctrl-1 = <&spi1_sleep>;
|
||||
pinctrl-0 = <&blsp_spi1_default>;
|
||||
pinctrl-1 = <&blsp_spi1_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1669,8 +1665,8 @@
|
||||
dmas = <&blsp_dma 6>, <&blsp_dma 7>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c2_default>;
|
||||
pinctrl-1 = <&i2c2_sleep>;
|
||||
pinctrl-0 = <&blsp_i2c2_default>;
|
||||
pinctrl-1 = <&blsp_i2c2_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1686,8 +1682,8 @@
|
||||
dmas = <&blsp_dma 6>, <&blsp_dma 7>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&spi2_default>;
|
||||
pinctrl-1 = <&spi2_sleep>;
|
||||
pinctrl-0 = <&blsp_spi2_default>;
|
||||
pinctrl-1 = <&blsp_spi2_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1703,8 +1699,8 @@
|
||||
dmas = <&blsp_dma 8>, <&blsp_dma 9>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c3_default>;
|
||||
pinctrl-1 = <&i2c3_sleep>;
|
||||
pinctrl-0 = <&blsp_i2c3_default>;
|
||||
pinctrl-1 = <&blsp_i2c3_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1720,8 +1716,8 @@
|
||||
dmas = <&blsp_dma 8>, <&blsp_dma 9>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&spi3_default>;
|
||||
pinctrl-1 = <&spi3_sleep>;
|
||||
pinctrl-0 = <&blsp_spi3_default>;
|
||||
pinctrl-1 = <&blsp_spi3_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1737,8 +1733,8 @@
|
||||
dmas = <&blsp_dma 10>, <&blsp_dma 11>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c4_default>;
|
||||
pinctrl-1 = <&i2c4_sleep>;
|
||||
pinctrl-0 = <&blsp_i2c4_default>;
|
||||
pinctrl-1 = <&blsp_i2c4_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1754,8 +1750,8 @@
|
||||
dmas = <&blsp_dma 10>, <&blsp_dma 11>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&spi4_default>;
|
||||
pinctrl-1 = <&spi4_sleep>;
|
||||
pinctrl-0 = <&blsp_spi4_default>;
|
||||
pinctrl-1 = <&blsp_spi4_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1771,8 +1767,8 @@
|
||||
dmas = <&blsp_dma 12>, <&blsp_dma 13>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c5_default>;
|
||||
pinctrl-1 = <&i2c5_sleep>;
|
||||
pinctrl-0 = <&blsp_i2c5_default>;
|
||||
pinctrl-1 = <&blsp_i2c5_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1788,8 +1784,8 @@
|
||||
dmas = <&blsp_dma 12>, <&blsp_dma 13>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&spi5_default>;
|
||||
pinctrl-1 = <&spi5_sleep>;
|
||||
pinctrl-0 = <&blsp_spi5_default>;
|
||||
pinctrl-1 = <&blsp_spi5_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1805,8 +1801,8 @@
|
||||
dmas = <&blsp_dma 14>, <&blsp_dma 15>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c6_default>;
|
||||
pinctrl-1 = <&i2c6_sleep>;
|
||||
pinctrl-0 = <&blsp_i2c6_default>;
|
||||
pinctrl-1 = <&blsp_i2c6_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1822,8 +1818,8 @@
|
||||
dmas = <&blsp_dma 14>, <&blsp_dma 15>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&spi6_default>;
|
||||
pinctrl-1 = <&spi6_sleep>;
|
||||
pinctrl-0 = <&blsp_spi6_default>;
|
||||
pinctrl-1 = <&blsp_spi6_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
@@ -1870,7 +1866,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
wcnss: remoteproc@a21b000 {
|
||||
wcnss: remoteproc@a204000 {
|
||||
compatible = "qcom,pronto-v2-pil", "qcom,pronto";
|
||||
reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
|
||||
reg-names = "ccu", "dxe", "pmu";
|
||||
|
||||
82
arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
Normal file
82
arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
Normal file
@@ -0,0 +1,82 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
#include "msm8939.dtsi"
|
||||
#include "pm8916.dtsi"
|
||||
|
||||
&mdss_dsi0 {
|
||||
vdda-supply = <&pm8916_l2>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
};
|
||||
|
||||
&mdss_dsi0_phy {
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
};
|
||||
|
||||
&mdss_dsi1 {
|
||||
vdda-supply = <&pm8916_l2>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
};
|
||||
|
||||
&mdss_dsi1_phy {
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
};
|
||||
|
||||
&mpss {
|
||||
pll-supply = <&pm8916_l7>;
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
smd_rpm_regulators: regulators {
|
||||
compatible = "qcom,rpm-pm8916-regulators";
|
||||
|
||||
/* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */
|
||||
/* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */
|
||||
pm8916_s3: s3 {};
|
||||
pm8916_s4: s4 {};
|
||||
|
||||
pm8916_l1: l1 {};
|
||||
pm8916_l2: l2 {};
|
||||
/* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */
|
||||
pm8916_l4: l4 {};
|
||||
pm8916_l5: l5 {};
|
||||
pm8916_l6: l6 {};
|
||||
pm8916_l7: l7 {};
|
||||
pm8916_l8: l8 {};
|
||||
pm8916_l9: l9 {};
|
||||
pm8916_l10: l10 {};
|
||||
pm8916_l11: l11 {};
|
||||
pm8916_l12: l12 {};
|
||||
pm8916_l13: l13 {};
|
||||
pm8916_l14: l14 {};
|
||||
pm8916_l15: l15 {};
|
||||
pm8916_l16: l16 {};
|
||||
pm8916_l17: l17 {};
|
||||
pm8916_l18: l18 {};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
vmmc-supply = <&pm8916_l8>;
|
||||
vqmmc-supply = <&pm8916_l5>;
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
vmmc-supply = <&pm8916_l11>;
|
||||
vqmmc-supply = <&pm8916_l12>;
|
||||
};
|
||||
|
||||
&usb_hs_phy {
|
||||
v1p8-supply = <&pm8916_l7>;
|
||||
v3p3-supply = <&pm8916_l13>;
|
||||
};
|
||||
|
||||
&wcnss {
|
||||
vddpx-supply = <&pm8916_l7>;
|
||||
};
|
||||
|
||||
&wcnss_iris {
|
||||
vddxo-supply = <&pm8916_l7>;
|
||||
vddrfa-supply = <&pm8916_s3>;
|
||||
vddpa-supply = <&pm8916_l9>;
|
||||
vdddig-supply = <&pm8916_l5>;
|
||||
};
|
||||
183
arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
Normal file
183
arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
Normal file
@@ -0,0 +1,183 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2022-2023, Bryan O'Donoghue.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8939.dtsi"
|
||||
#include "msm8939-pm8916.dtsi"
|
||||
#include <dt-bindings/arm/qcom,ids.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia M4 Aqua";
|
||||
compatible = "sony,kanuti-tulip", "qcom,msm8939";
|
||||
|
||||
qcom,board-id = <QCOM_BOARD_ID_MTP 0>;
|
||||
qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>;
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhc_1; /* SDC1 eMMC slot */
|
||||
mmc1 = &sdhc_2; /* SDC2 SD card slot */
|
||||
serial0 = &blsp_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
usb_id_default: usb-id-default-state {
|
||||
pins = "gpio110";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
drive-strength = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||||
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||||
vdd_l7-supply = <&pm8916_s4>;
|
||||
|
||||
pm8916_s3: s3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
};
|
||||
|
||||
pm8916_s4: s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
pm8916_l2: l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
pm8916_l4: l4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
pm8916_l5: l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8916_l6: l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pm8916_l7: l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8916_l8: l8 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
pm8916_l9: l9 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l10: l10 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l11: l11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-system-load = <200000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8916_l12: l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l13: l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
pm8916_l14: l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l15: l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l16: l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
pm8916_l18: l18 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
pinctrl-0 = <&sdc1_default_state>;
|
||||
pinctrl-1 = <&sdc1_sleep_state>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
pinctrl-0 = <&sdc2_default_state>;
|
||||
pinctrl-1 = <&sdc2_sleep_state>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
extcon = <&usb_id>, <&usb_id>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_hs_phy {
|
||||
extcon = <&usb_id>;
|
||||
};
|
||||
|
||||
&wcnss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcnss_iris {
|
||||
compatible = "qcom,wcn3660";
|
||||
};
|
||||
2452
arch/arm64/boot/dts/qcom/msm8939.dtsi
Normal file
2452
arch/arm64/boot/dts/qcom/msm8939.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
@@ -1000,7 +1000,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
apps_iommu: iommu@1e00000 {
|
||||
apps_iommu: iommu@1e20000 {
|
||||
compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
|
||||
ranges = <0 0x01e20000 0x20000>;
|
||||
|
||||
@@ -1274,6 +1274,19 @@
|
||||
};
|
||||
};
|
||||
|
||||
blsp1_dma: dma-controller@7884000 {
|
||||
compatible = "qcom,bam-v1.7.0";
|
||||
reg = <0x07884000 0x1f000>;
|
||||
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
num-channels = <12>;
|
||||
#dma-cells = <1>;
|
||||
qcom,ee = <0>;
|
||||
qcom,num-ees = <4>;
|
||||
qcom,controlled-remotely;
|
||||
};
|
||||
|
||||
uart_0: serial@78af000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x078af000 0x200>;
|
||||
@@ -1292,6 +1305,8 @@
|
||||
clock-names = "core", "iface";
|
||||
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c_1_default>;
|
||||
@@ -1310,6 +1325,8 @@
|
||||
clock-names = "core", "iface";
|
||||
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c_2_default>;
|
||||
@@ -1328,6 +1345,9 @@
|
||||
clock-names = "core", "iface";
|
||||
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c_3_default>;
|
||||
pinctrl-1 = <&i2c_3_sleep>;
|
||||
@@ -1345,6 +1365,9 @@
|
||||
clock-names = "core", "iface";
|
||||
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c_4_default>;
|
||||
pinctrl-1 = <&i2c_4_sleep>;
|
||||
@@ -1355,6 +1378,19 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp2_dma: dma-controller@7ac4000 {
|
||||
compatible = "qcom,bam-v1.7.0";
|
||||
reg = <0x07ac4000 0x1f000>;
|
||||
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
num-channels = <12>;
|
||||
#dma-cells = <1>;
|
||||
qcom,ee = <0>;
|
||||
qcom,num-ees = <4>;
|
||||
qcom,controlled-remotely;
|
||||
};
|
||||
|
||||
i2c_5: i2c@7af5000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
reg = <0x07af5000 0x600>;
|
||||
@@ -1362,6 +1398,9 @@
|
||||
clock-names = "core", "iface";
|
||||
clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP2_AHB_CLK>;
|
||||
dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c_5_default>;
|
||||
pinctrl-1 = <&i2c_5_sleep>;
|
||||
@@ -1379,6 +1418,9 @@
|
||||
clock-names = "core", "iface";
|
||||
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP2_AHB_CLK>;
|
||||
dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c_6_default>;
|
||||
pinctrl-1 = <&i2c_6_sleep>;
|
||||
@@ -1396,6 +1438,9 @@
|
||||
clock-names = "core", "iface";
|
||||
clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP2_AHB_CLK>;
|
||||
dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c_7_default>;
|
||||
pinctrl-1 = <&i2c_7_sleep>;
|
||||
@@ -1413,6 +1458,9 @@
|
||||
clock-names = "core", "iface";
|
||||
clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
|
||||
<&gcc GCC_BLSP2_AHB_CLK>;
|
||||
dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
|
||||
dma-names = "tx", "rx";
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c_8_default>;
|
||||
pinctrl-1 = <&i2c_8_sleep>;
|
||||
@@ -1423,7 +1471,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
wcnss: remoteproc@a21b000 {
|
||||
wcnss: remoteproc@a204000 {
|
||||
compatible = "qcom,pronto-v3-pil", "qcom,pronto";
|
||||
reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
|
||||
reg-names = "ccu", "dxe", "pmu";
|
||||
@@ -1505,8 +1553,8 @@
|
||||
timer@b120000 {
|
||||
compatible = "arm,armv7-timer-mem";
|
||||
reg = <0x0b120000 0x1000>;
|
||||
#address-cells = <0x01>;
|
||||
#size-cells = <0x01>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
frame@b121000 {
|
||||
|
||||
@@ -820,7 +820,7 @@
|
||||
#interrupt-cells = <4>;
|
||||
};
|
||||
|
||||
sdhc_1: mmc@7824000 {
|
||||
sdhc_1: mmc@7824900 {
|
||||
compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
|
||||
reg = <0x07824900 0x500>, <0x07824000 0x800>;
|
||||
reg-names = "hc", "core";
|
||||
@@ -836,7 +836,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhc_2: mmc@7864000 {
|
||||
sdhc_2: mmc@7864900 {
|
||||
compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
|
||||
reg = <0x07864900 0x11c>, <0x07864000 0x800>;
|
||||
reg-names = "hc", "core";
|
||||
@@ -955,7 +955,7 @@
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
sdhc_3: mmc@7a24000 {
|
||||
sdhc_3: mmc@7a24900 {
|
||||
compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
|
||||
reg = <0x07a24900 0x11c>, <0x07a24000 0x800>;
|
||||
reg-names = "hc", "core";
|
||||
|
||||
@@ -340,8 +340,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
|
||||
soc: soc@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0 0xffffffff>;
|
||||
@@ -745,7 +744,7 @@
|
||||
reg = <0xfc4ab000 0x4>;
|
||||
};
|
||||
|
||||
spmi_bus: spmi@fc4c0000 {
|
||||
spmi_bus: spmi@fc4cf000 {
|
||||
compatible = "qcom,spmi-pmic-arb";
|
||||
reg = <0xfc4cf000 0x1000>,
|
||||
<0xfc4cb000 0x1000>,
|
||||
|
||||
@@ -11,6 +11,7 @@
|
||||
#include "pmi8996.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
||||
|
||||
@@ -605,6 +606,34 @@
|
||||
};
|
||||
};
|
||||
|
||||
&pmi8994_lpg {
|
||||
qcom,power-source = <1>;
|
||||
status = "okay";
|
||||
|
||||
multi-led {
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@3 {
|
||||
reg = <3>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmi8994_spmi_regulators {
|
||||
vdd_gfx:
|
||||
pmi8994_s2: s2 {
|
||||
|
||||
@@ -604,7 +604,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
soc: soc@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0 0xffffffff>;
|
||||
@@ -887,16 +887,16 @@
|
||||
#power-domain-cells = <1>;
|
||||
reg = <0x008c0000 0x40000>;
|
||||
clocks = <&xo_board>,
|
||||
<&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
|
||||
<&gcc GPLL0>,
|
||||
<&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
|
||||
<&dsi0_phy 1>,
|
||||
<&dsi0_phy 0>,
|
||||
<&dsi1_phy 1>,
|
||||
<&dsi1_phy 0>,
|
||||
<&hdmi_phy>;
|
||||
clock-names = "xo",
|
||||
"gcc_mmss_noc_cfg_ahb_clk",
|
||||
"gpll0",
|
||||
"gcc_mmss_noc_cfg_ahb_clk",
|
||||
"dsi0pll",
|
||||
"dsi0pllbyte",
|
||||
"dsi1pll",
|
||||
@@ -1830,7 +1830,7 @@
|
||||
compatible = "simple-pm-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
ranges = <0x0 0x0 0xffffffff>;
|
||||
|
||||
pcie0: pcie@600000 {
|
||||
compatible = "qcom,pcie-msm8996";
|
||||
@@ -2067,7 +2067,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
camss: camss@a00000 {
|
||||
camss: camss@a34000 {
|
||||
compatible = "qcom,msm8996-camss";
|
||||
reg = <0x00a34000 0x1000>,
|
||||
<0x00a00030 0x4>,
|
||||
|
||||
@@ -800,7 +800,7 @@
|
||||
<GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
soc: soc@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0 0xffffffff>;
|
||||
@@ -1228,6 +1228,57 @@
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
blsp1_spi_b_default: blsp1-spi-b-default-state {
|
||||
pins = "gpio23", "gpio28";
|
||||
function = "blsp1_spi_b";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp1_spi1_default: blsp1-spi1-default-state {
|
||||
pins = "gpio0", "gpio1", "gpio2", "gpio3";
|
||||
function = "blsp_spi1";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp1_spi2_default: blsp1-spi2-default-state {
|
||||
pins = "gpio31", "gpio34", "gpio32", "gpio33";
|
||||
function = "blsp_spi2";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp1_spi3_default: blsp1-spi3-default-state {
|
||||
pins = "gpio45", "gpio46", "gpio47", "gpio48";
|
||||
function = "blsp_spi2";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp1_spi4_default: blsp1-spi4-default-state {
|
||||
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
||||
function = "blsp_spi4";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp1_spi5_default: blsp1-spi5-default-state {
|
||||
pins = "gpio85", "gpio86", "gpio87", "gpio88";
|
||||
function = "blsp_spi5";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp1_spi6_default: blsp1-spi6-default-state {
|
||||
pins = "gpio41", "gpio42", "gpio43", "gpio44";
|
||||
function = "blsp_spi6";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
|
||||
/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
|
||||
blsp2_i2c1_default: blsp2-i2c1-default-state {
|
||||
pins = "gpio55", "gpio56";
|
||||
@@ -1312,6 +1363,48 @@
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
blsp2_spi1_default: blsp2-spi1-default-state {
|
||||
pins = "gpio53", "gpio54", "gpio55", "gpio56";
|
||||
function = "blsp_spi7";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp2_spi2_default: blsp2-spi2-default-state {
|
||||
pins = "gpio4", "gpio5", "gpio6", "gpio7";
|
||||
function = "blsp_spi8";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp2_spi3_default: blsp2-spi3-default-state {
|
||||
pins = "gpio49", "gpio50", "gpio51", "gpio52";
|
||||
function = "blsp_spi9";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp2_spi4_default: blsp2-spi4-default-state {
|
||||
pins = "gpio65", "gpio66", "gpio67", "gpio68";
|
||||
function = "blsp_spi10";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp2_spi5_default: blsp2-spi5-default-state {
|
||||
pins = "gpio58", "gpio59", "gpio60", "gpio61";
|
||||
function = "blsp_spi11";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
blsp2_spi6_default: blsp2-spi6-default-state {
|
||||
pins = "gpio81", "gpio82", "gpio83", "gpio84";
|
||||
function = "blsp_spi12";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
remoteproc_mss: remoteproc@4080000 {
|
||||
@@ -2249,6 +2342,114 @@
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp1_spi1: spi@c175000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c175000 0x600>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp1_spi1_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp1_spi2: spi@c176000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c176000 0x600>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp1_spi2_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp1_spi3: spi@c177000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c177000 0x600>;
|
||||
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp1_spi3_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp1_spi4: spi@c178000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c178000 0x600>;
|
||||
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp1_spi4_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp1_spi5: spi@c179000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c179000 0x600>;
|
||||
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp1_spi5_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp1_spi6: spi@c17a000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c17a000 0x600>;
|
||||
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp1_spi6_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp2_dma: dma-controller@c184000 {
|
||||
compatible = "qcom,bam-v1.7.0";
|
||||
reg = <0x0c184000 0x25000>;
|
||||
@@ -2392,6 +2593,114 @@
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp2_spi1: spi@c1b5000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c1b5000 0x600>;
|
||||
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP2_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp2_spi1_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp2_spi2: spi@c1b6000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c1b6000 0x600>;
|
||||
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP2_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp2_spi2_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp2_spi3: spi@c1b7000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c1b7000 0x600>;
|
||||
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP2_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp2_spi3_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp2_spi4: spi@c1b8000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c1b8000 0x600>;
|
||||
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP2_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp2_spi4_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp2_spi5: spi@c1b9000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c1b9000 0x600>;
|
||||
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP2_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp2_spi5_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
blsp2_spi6: spi@c1ba000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
reg = <0x0c1ba000 0x600>;
|
||||
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
|
||||
<&gcc GCC_BLSP2_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
|
||||
dma-names = "tx", "rx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blsp2_spi6_default>;
|
||||
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
mmcc: clock-controller@c8c0000 {
|
||||
compatible = "qcom,mmcc-msm8998";
|
||||
#clock-cells = <1>;
|
||||
|
||||
@@ -3,6 +3,7 @@
|
||||
* Copyright (C) 2022 Luca Weiss <luca.weiss@fairphone.com>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/iio/qcom,spmi-vadc.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
|
||||
@@ -55,5 +55,11 @@
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
pm8550_flash: led-controller@ee00 {
|
||||
compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led";
|
||||
reg = <0xee00>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -139,7 +139,7 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
wcd_codec: audio-codec@f000 {
|
||||
pm8916_codec: audio-codec@f000 {
|
||||
compatible = "qcom,pm8916-wcd-analog-codec";
|
||||
reg = <0xf000>;
|
||||
reg-names = "pmic-codec-core";
|
||||
@@ -174,10 +174,8 @@
|
||||
"cdc_ear_cnp_int",
|
||||
"cdc_hphr_cnp_int",
|
||||
"cdc_hphl_cnp_int";
|
||||
vdd-cdc-io-supply = <&pm8916_l5>;
|
||||
vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
|
||||
vdd-micbias-supply = <&pm8916_l13>;
|
||||
#sound-dai-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -79,6 +79,16 @@
|
||||
reg-names = "rtc", "alarm";
|
||||
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
|
||||
pm8953_gpios: gpio@c000 {
|
||||
compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio";
|
||||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pm8953_gpios 0 0 8>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic@1 {
|
||||
|
||||
@@ -55,7 +55,7 @@
|
||||
|
||||
pm8998_resin: resin {
|
||||
compatible = "qcom,pm8941-resin";
|
||||
interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
|
||||
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
|
||||
debounce = <15625>;
|
||||
bias-pull-up;
|
||||
status = "disabled";
|
||||
|
||||
165
arch/arm64/boot/dts/qcom/pmi632.dtsi
Normal file
165
arch/arm64/boot/dts/qcom/pmi632.dtsi
Normal file
@@ -0,0 +1,165 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/iio/qcom,spmi-vadc.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
/ {
|
||||
thermal-zones {
|
||||
pmi632-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
polling-delay = <0>;
|
||||
|
||||
thermal-sensors = <&pmi632_temp>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <125000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus {
|
||||
pmic@2 {
|
||||
compatible = "qcom,pmi632", "qcom,spmi-pmic";
|
||||
reg = <0x2 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmi632_temp: temp-alarm@2400 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0x2400>;
|
||||
interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmi632_adc: adc@3100 {
|
||||
compatible = "qcom,spmi-adc5";
|
||||
reg = <0x3100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#io-channel-cells = <1>;
|
||||
interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
channel@0 {
|
||||
reg = <ADC5_REF_GND>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "ref_gnd";
|
||||
};
|
||||
|
||||
channel@1 {
|
||||
reg = <ADC5_1P25VREF>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "vref_1p25";
|
||||
};
|
||||
|
||||
channel@6 {
|
||||
reg = <ADC5_DIE_TEMP>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "die_temp";
|
||||
};
|
||||
|
||||
channel@7 {
|
||||
reg = <ADC5_USB_IN_I>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "usb_in_i_uv";
|
||||
};
|
||||
|
||||
channel@8 {
|
||||
reg = <ADC5_USB_IN_V_16>;
|
||||
qcom,pre-scaling = <1 16>;
|
||||
label = "usb_in_v_div_16";
|
||||
};
|
||||
|
||||
channel@9 {
|
||||
reg = <ADC5_CHG_TEMP>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "chg_temp";
|
||||
};
|
||||
|
||||
channel@4b {
|
||||
reg = <ADC5_BAT_ID_100K_PU>;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
qcom,ratiometric;
|
||||
label = "bat_id";
|
||||
};
|
||||
|
||||
channel@83 {
|
||||
reg = <ADC5_VPH_PWR>;
|
||||
qcom,pre-scaling = <1 3>;
|
||||
label = "vph_pwr";
|
||||
};
|
||||
|
||||
channel@84 {
|
||||
reg = <ADC5_VBAT_SNS>;
|
||||
qcom,pre-scaling = <1 3>;
|
||||
label = "vbat_sns";
|
||||
};
|
||||
};
|
||||
|
||||
pmi632_adc_tm: adc-tm@3500 {
|
||||
compatible = "qcom,spmi-adc-tm5";
|
||||
reg = <0x3500>;
|
||||
interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pmi632_sdam_7: nvram@b600 {
|
||||
compatible = "qcom,spmi-sdam";
|
||||
reg = <0xb600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0xb600 0x100>;
|
||||
};
|
||||
|
||||
pmi632_gpios: gpio@c000 {
|
||||
compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio";
|
||||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pmi632_gpios 0 0 8>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic@3 {
|
||||
compatible = "qcom,pmi632", "qcom,spmi-pmic";
|
||||
reg = <0x3 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmi632_lpg: pwm {
|
||||
compatible = "qcom,pmi632-lpg";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#pwm-cells = <2>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -60,6 +60,12 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pmi8998_flash: led-controller@d300 {
|
||||
compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led";
|
||||
reg = <0xd300>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pmi8998_wled: leds@d800 {
|
||||
compatible = "qcom,pmi8998-wled";
|
||||
reg = <0xd800>, <0xd900>;
|
||||
|
||||
@@ -13,6 +13,16 @@
|
||||
#define PMK8350_SID 0
|
||||
#endif
|
||||
|
||||
/ {
|
||||
reboot-mode {
|
||||
compatible = "nvmem-reboot-mode";
|
||||
nvmem-cells = <&reboot_reason>;
|
||||
nvmem-cell-names = "reboot-mode";
|
||||
mode-recovery = <0x01>;
|
||||
mode-bootloader = <0x02>;
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus {
|
||||
pmk8350: pmic@PMK8350_SID {
|
||||
compatible = "qcom,pmk8350", "qcom,spmi-pmic";
|
||||
@@ -66,6 +76,19 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pmk8350_sdam_2: nvram@7100 {
|
||||
compatible = "qcom,spmi-sdam";
|
||||
reg = <0x7100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x7100 0x100>;
|
||||
|
||||
reboot_reason: reboot-reason@48 {
|
||||
reg = <0x48 0x1>;
|
||||
bits = <1 7>;
|
||||
};
|
||||
};
|
||||
|
||||
pmk8350_gpios: gpio@b000 {
|
||||
compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
|
||||
reg = <0xb000>;
|
||||
|
||||
@@ -8,6 +8,16 @@
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
/ {
|
||||
reboot-mode {
|
||||
compatible = "nvmem-reboot-mode";
|
||||
nvmem-cells = <&reboot_reason>;
|
||||
nvmem-cell-names = "reboot-mode";
|
||||
mode-recovery = <0x01>;
|
||||
mode-bootloader = <0x02>;
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus {
|
||||
pmk8550: pmic@0 {
|
||||
compatible = "qcom,pm8550", "qcom,spmi-pmic";
|
||||
@@ -42,6 +52,19 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pmk8550_sdam_2: nvram@7100 {
|
||||
compatible = "qcom,spmi-sdam";
|
||||
reg = <0x7100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x7100 0x100>;
|
||||
|
||||
reboot_reason: reboot-reason@48 {
|
||||
reg = <0x48 0x1>;
|
||||
bits = <1 7>;
|
||||
};
|
||||
};
|
||||
|
||||
pmk8550_gpios: gpio@8800 {
|
||||
compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
|
||||
reg = <0xb800>;
|
||||
|
||||
@@ -27,8 +27,8 @@
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
mdio {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
phy1: phy@4 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
|
||||
@@ -1103,7 +1103,7 @@
|
||||
};
|
||||
|
||||
apps_smmu: iommu@15000000 {
|
||||
compatible = "qcom,qdu1000-smmu-500", "arm,mmu-500";
|
||||
compatible = "qcom,qdu1000-smmu-500", "qcom,smmu-500", "arm,mmu-500";
|
||||
reg = <0x0 0x15000000 0x0 0x100000>;
|
||||
#iommu-cells = <2>;
|
||||
#global-interrupts = <2>;
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "sm4250.dtsi"
|
||||
|
||||
/ {
|
||||
@@ -19,21 +20,221 @@
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
clocks {
|
||||
clk40M: can-clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <40000000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con: endpoint {
|
||||
remote-endpoint = <<9611_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-bt {
|
||||
label = "blue:bt";
|
||||
function = LED_FUNCTION_BLUETOOTH;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "bluetooth-power";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led-user0 {
|
||||
label = "green:user0";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "none";
|
||||
default-state = "off";
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
led-wlan {
|
||||
label = "yellow:wlan";
|
||||
function = LED_FUNCTION_WLAN;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy0tx";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VREG_HDMI_OUT_1P2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <&vdc_1v2>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
lt9611_3v3: regulator-lt9611-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "LT9611_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vdc_3v3>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* Main barrel jack input */
|
||||
vdc_12v: regulator-vdc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "DC_12V";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* 1.2V supply stepped down from the barrel jack input */
|
||||
vdc_1v2: regulator-vdc-1v2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDC_1V2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <&vdc_12v>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* 3.3V supply stepped down from the barrel jack input */
|
||||
vdc_3v3: regulator-vdc-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vdc_12v>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* 5V supply stepped down from the barrel jack input */
|
||||
vdc_5v: regulator-vdc-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDC_5V";
|
||||
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* "Battery" voltage for the SoM, stepped down from the barrel jack input */
|
||||
vdc_vbat_som: regulator-vdc-vbat {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VBAT_SOM";
|
||||
regulator-min-microvolt = <4200000>;
|
||||
regulator-max-microvolt = <4200000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
/* PMI632 charger out, supplied by VBAT */
|
||||
vph_pwr: regulator-vph-pwr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
vin-supply = <&vdc_vbat_som>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&gpi_dma0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
lt9611_codec: hdmi-bridge@2b {
|
||||
compatible = "lontium,lt9611uxc";
|
||||
reg = <0x2b>;
|
||||
interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
|
||||
reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
vdd-supply = <&vreg_hdmi_out_1p2>;
|
||||
vcc-supply = <<9611_3v3>;
|
||||
|
||||
pinctrl-0 = <<9611_irq_pin <9611_rst_pin>;
|
||||
pinctrl-names = "default";
|
||||
#sound-dai-cells = <1>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
lt9611_a: endpoint {
|
||||
remote-endpoint = <&mdss_dsi0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
|
||||
lt9611_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_dsi0 {
|
||||
vdda-supply = <&vreg_l18a_1p232>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_dsi0_out {
|
||||
remote-endpoint = <<9611_a>;
|
||||
data-lanes = <0 1 2 3>;
|
||||
};
|
||||
|
||||
&mdss_dsi0_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_adsp {
|
||||
firmware-name = "qcom/qrb4210/adsp.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_cdsp {
|
||||
firmware-name = "qcom/qrb4210/cdsp.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
regulators {
|
||||
compatible = "qcom,rpm-pm6125-regulators";
|
||||
@@ -86,6 +287,7 @@
|
||||
vreg_l5a_2p96: l5 {
|
||||
regulator-min-microvolt = <1648000>;
|
||||
regulator-max-microvolt = <3056000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
vreg_l6a_0p6: l6 {
|
||||
@@ -116,6 +318,7 @@
|
||||
vreg_l11a_1p8: l11 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <1952000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: l12 {
|
||||
@@ -190,6 +393,10 @@
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
pinctrl-0 = <&sdc1_state_on>;
|
||||
pinctrl-1 = <&sdc1_state_off>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
vmmc-supply = <&vreg_l24a_2p96>;
|
||||
vqmmc-supply = <&vreg_l11a_1p8>;
|
||||
no-sdio;
|
||||
@@ -199,7 +406,12 @@
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
|
||||
cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */
|
||||
|
||||
pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
|
||||
pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
vmmc-supply = <&vreg_l22a_2p96>;
|
||||
vqmmc-supply = <&vreg_l5a_2p96>;
|
||||
no-sdio;
|
||||
@@ -207,21 +419,78 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi5 {
|
||||
status = "okay";
|
||||
|
||||
can@0 {
|
||||
compatible = "microchip,mcp2518fd";
|
||||
reg = <0>;
|
||||
interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
|
||||
clocks = <&clk40M>;
|
||||
spi-max-frequency = <10000000>;
|
||||
vdd-supply = <&vdc_5v>;
|
||||
xceiver-supply = <&vdc_5v>;
|
||||
};
|
||||
};
|
||||
|
||||
&sleep_clk {
|
||||
clock-frequency = <32000>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <37 5>, <43 2>, <47 1>,
|
||||
<49 1>, <52 1>, <54 1>,
|
||||
gpio-reserved-ranges = <43 2>, <49 1>, <54 1>,
|
||||
<56 3>, <61 2>, <64 1>,
|
||||
<68 1>, <72 8>, <96 1>;
|
||||
|
||||
lt9611_rst_pin: lt9611-rst-state {
|
||||
pins = "gpio41";
|
||||
function = "gpio";
|
||||
input-disable;
|
||||
output-high;
|
||||
};
|
||||
|
||||
lt9611_irq_pin: lt9611-irq-state {
|
||||
pins = "gpio46";
|
||||
function = "gpio";
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
sdc2_card_det_n: sd-card-det-n-state {
|
||||
pins = "gpio88";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_dwc3 {
|
||||
maximum-speed = "super-speed";
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb_hsphy {
|
||||
vdd-supply = <&vreg_l4a_0p9>;
|
||||
vdda-pll-supply = <&vreg_l12a_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vreg_l15a_3p128>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l4a_0p9>;
|
||||
vdda-pll-supply = <&vreg_l12a_1p8>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xo_board {
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
|
||||
@@ -47,29 +47,6 @@
|
||||
|
||||
vin-supply = <&vreg_3p3>;
|
||||
};
|
||||
|
||||
mtl_rx_setup: rx-queues-config {
|
||||
snps,rx-queues-to-use = <1>;
|
||||
snps,rx-sched-sp;
|
||||
|
||||
queue0 {
|
||||
snps,dcb-algorithm;
|
||||
snps,map-to-dma-channel = <0x0>;
|
||||
snps,route-up;
|
||||
snps,priority = <0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
mtl_tx_setup: tx-queues-config {
|
||||
snps,tx-queues-to-use = <1>;
|
||||
snps,tx-sched-wrr;
|
||||
|
||||
queue0 {
|
||||
snps,weight = <0x10>;
|
||||
snps,dcb-algorithm;
|
||||
snps,priority = <0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
@@ -352,19 +329,40 @@
|
||||
max-speed = <1000>;
|
||||
|
||||
mdio {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* Micrel KSZ9031RNZ PHY */
|
||||
rgmii_phy: phy@7 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x7>;
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
|
||||
interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>;
|
||||
device_type = "ethernet-phy";
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
};
|
||||
};
|
||||
|
||||
mtl_rx_setup: rx-queues-config {
|
||||
snps,rx-queues-to-use = <1>;
|
||||
snps,rx-sched-sp;
|
||||
|
||||
queue0 {
|
||||
snps,dcb-algorithm;
|
||||
snps,map-to-dma-channel = <0x0>;
|
||||
snps,route-up;
|
||||
snps,priority = <0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
mtl_tx_setup: tx-queues-config {
|
||||
snps,tx-queues-to-use = <1>;
|
||||
snps,tx-sched-wrr;
|
||||
|
||||
queue0 {
|
||||
snps,weight = <0x10>;
|
||||
snps,dcb-algorithm;
|
||||
snps,priority = <0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -151,6 +151,184 @@
|
||||
};
|
||||
};
|
||||
|
||||
ðernet0 {
|
||||
snps,mtl-rx-config = <ðernet0_mtl_rx_setup>;
|
||||
snps,mtl-tx-config = <ðernet0_mtl_tx_setup>;
|
||||
|
||||
max-speed = <1000>;
|
||||
phy-handle = <&rgmii_phy>;
|
||||
phy-mode = "rgmii-txid";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ðernet0_default>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* Marvell 88EA1512 */
|
||||
rgmii_phy: phy@8 {
|
||||
reg = <0x8>;
|
||||
|
||||
interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
reset-gpios = <&pmm8540c_gpios 1 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <11000>;
|
||||
reset-deassert-us = <70000>;
|
||||
|
||||
device_type = "ethernet-phy";
|
||||
|
||||
/* Set to RGMII_SGMII mode and soft reset. Turn off auto-negotiation
|
||||
* from userspace to talk to the switch on the SGMII side of things
|
||||
*/
|
||||
marvell,reg-init =
|
||||
/* Set MODE[2:0] to RGMII_SGMII */
|
||||
<0x12 0x14 0xfff8 0x4>,
|
||||
/* Soft reset required after changing MODE[2:0] */
|
||||
<0x12 0x14 0x7fff 0x8000>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet0_mtl_rx_setup: rx-queues-config {
|
||||
snps,rx-queues-to-use = <1>;
|
||||
snps,rx-sched-sp;
|
||||
|
||||
queue0 {
|
||||
snps,dcb-algorithm;
|
||||
snps,map-to-dma-channel = <0x0>;
|
||||
snps,route-up;
|
||||
snps,priority = <0x1>;
|
||||
};
|
||||
|
||||
queue1 {
|
||||
snps,dcb-algorithm;
|
||||
snps,map-to-dma-channel = <0x1>;
|
||||
snps,route-ptp;
|
||||
};
|
||||
|
||||
queue2 {
|
||||
snps,avb-algorithm;
|
||||
snps,map-to-dma-channel = <0x2>;
|
||||
snps,route-avcp;
|
||||
};
|
||||
|
||||
queue3 {
|
||||
snps,avb-algorithm;
|
||||
snps,map-to-dma-channel = <0x3>;
|
||||
snps,priority = <0xc>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet0_mtl_tx_setup: tx-queues-config {
|
||||
snps,tx-queues-to-use = <1>;
|
||||
snps,tx-sched-sp;
|
||||
|
||||
queue0 {
|
||||
snps,dcb-algorithm;
|
||||
};
|
||||
|
||||
queue1 {
|
||||
snps,dcb-algorithm;
|
||||
};
|
||||
|
||||
queue2 {
|
||||
snps,avb-algorithm;
|
||||
snps,send_slope = <0x1000>;
|
||||
snps,idle_slope = <0x1000>;
|
||||
snps,high_credit = <0x3e800>;
|
||||
snps,low_credit = <0xffc18000>;
|
||||
};
|
||||
|
||||
queue3 {
|
||||
snps,avb-algorithm;
|
||||
snps,send_slope = <0x1000>;
|
||||
snps,idle_slope = <0x1000>;
|
||||
snps,high_credit = <0x3e800>;
|
||||
snps,low_credit = <0xffc18000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet1 {
|
||||
snps,mtl-rx-config = <ðernet1_mtl_rx_setup>;
|
||||
snps,mtl-tx-config = <ðernet1_mtl_tx_setup>;
|
||||
|
||||
max-speed = <1000>;
|
||||
phy-mode = "rgmii-txid";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ðernet1_default>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
|
||||
ethernet1_mtl_rx_setup: rx-queues-config {
|
||||
snps,rx-queues-to-use = <1>;
|
||||
snps,rx-sched-sp;
|
||||
|
||||
queue0 {
|
||||
snps,dcb-algorithm;
|
||||
snps,map-to-dma-channel = <0x0>;
|
||||
snps,route-up;
|
||||
snps,priority = <0x1>;
|
||||
};
|
||||
|
||||
queue1 {
|
||||
snps,dcb-algorithm;
|
||||
snps,map-to-dma-channel = <0x1>;
|
||||
snps,route-ptp;
|
||||
};
|
||||
|
||||
queue2 {
|
||||
snps,avb-algorithm;
|
||||
snps,map-to-dma-channel = <0x2>;
|
||||
snps,route-avcp;
|
||||
};
|
||||
|
||||
queue3 {
|
||||
snps,avb-algorithm;
|
||||
snps,map-to-dma-channel = <0x3>;
|
||||
snps,priority = <0xc>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet1_mtl_tx_setup: tx-queues-config {
|
||||
snps,tx-queues-to-use = <1>;
|
||||
snps,tx-sched-sp;
|
||||
|
||||
queue0 {
|
||||
snps,dcb-algorithm;
|
||||
};
|
||||
|
||||
queue1 {
|
||||
snps,dcb-algorithm;
|
||||
};
|
||||
|
||||
queue2 {
|
||||
snps,avb-algorithm;
|
||||
snps,send_slope = <0x1000>;
|
||||
snps,idle_slope = <0x1000>;
|
||||
snps,high_credit = <0x3e800>;
|
||||
snps,low_credit = <0xffc18000>;
|
||||
};
|
||||
|
||||
queue3 {
|
||||
snps,avb-algorithm;
|
||||
snps,send_slope = <0x1000>;
|
||||
snps,idle_slope = <0x1000>;
|
||||
snps,high_credit = <0x3e800>;
|
||||
snps,low_credit = <0xffc18000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_default>;
|
||||
@@ -316,6 +494,66 @@
|
||||
/* PINCTRL */
|
||||
|
||||
&tlmm {
|
||||
ethernet0_default: ethernet0-default-state {
|
||||
mdc-pins {
|
||||
pins = "gpio175";
|
||||
function = "rgmii_0";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio-pins {
|
||||
pins = "gpio176";
|
||||
function = "rgmii_0";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
rgmii-tx-pins {
|
||||
pins = "gpio183", "gpio184", "gpio185", "gpio186", "gpio187", "gpio188";
|
||||
function = "rgmii_0";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
rgmii-rx-pins {
|
||||
pins = "gpio177", "gpio178", "gpio179", "gpio180", "gpio181", "gpio182";
|
||||
function = "rgmii_0";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet1_default: ethernet1-default-state {
|
||||
mdc-pins {
|
||||
pins = "gpio97";
|
||||
function = "rgmii_1";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio-pins {
|
||||
pins = "gpio98";
|
||||
function = "rgmii_1";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
rgmii-tx-pins {
|
||||
pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110";
|
||||
function = "rgmii_1";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
rgmii-rx-pins {
|
||||
pins = "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104";
|
||||
function = "rgmii_1";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c0_default: i2c0-default-state {
|
||||
/* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */
|
||||
pins = "gpio135", "gpio136";
|
||||
|
||||
@@ -88,6 +88,14 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
reboot-mode {
|
||||
compatible = "nvmem-reboot-mode";
|
||||
nvmem-cells = <&reboot_reason>;
|
||||
nvmem-cell-names = "reboot-mode";
|
||||
mode-recovery = <0x01>;
|
||||
mode-bootloader = <0x02>;
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus {
|
||||
@@ -108,8 +116,6 @@
|
||||
compatible = "qcom,pmk8350-pon";
|
||||
reg = <0x1200>, <0x800>;
|
||||
reg-names = "hlos", "pbs";
|
||||
mode-recovery = <0x1>;
|
||||
mode-bootloader = <0x2>;
|
||||
|
||||
pmm8654au_0_pon_pwrkey: pwrkey {
|
||||
compatible = "qcom,pmk8350-pwrkey";
|
||||
@@ -135,6 +141,19 @@
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
pmm8654au_0_sdam_0: nvram@7100 {
|
||||
compatible = "qcom,spmi-sdam";
|
||||
reg = <0x7100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x7100 0x100>;
|
||||
|
||||
reboot_reason: reboot-reason@48 {
|
||||
reg = <0x48 0x1>;
|
||||
bits = <1 7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmm8654au_1: pmic@2 {
|
||||
|
||||
@@ -5,6 +5,7 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
|
||||
#include "sa8775p.dtsi"
|
||||
@@ -18,8 +19,10 @@
|
||||
serial0 = &uart10;
|
||||
serial1 = &uart12;
|
||||
serial2 = &uart17;
|
||||
i2c11 = &i2c11;
|
||||
i2c18 = &i2c18;
|
||||
spi16 = &spi16;
|
||||
ufshc1 = &ufs_mem_hc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -258,6 +261,13 @@
|
||||
};
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-0 = <&qup_i2c11_default>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c18 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-0 = <&qup_i2c18_default>;
|
||||
@@ -291,6 +301,13 @@
|
||||
"BT_EN",
|
||||
"USB2_PWR_EN",
|
||||
"USB2_FAULT";
|
||||
|
||||
usb2_en_state: usb2-en-state {
|
||||
pins = "gpio9";
|
||||
function = "normal";
|
||||
output-high;
|
||||
power-source = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pmm8654au_2_gpios {
|
||||
@@ -306,6 +323,20 @@
|
||||
"USB1_PWR_ENABLE",
|
||||
"USB1_FAULT",
|
||||
"VMON_SPX8";
|
||||
|
||||
usb0_en_state: usb0-en-state {
|
||||
pins = "gpio3";
|
||||
function = "normal";
|
||||
output-high;
|
||||
power-source = <0>;
|
||||
};
|
||||
|
||||
usb1_en_state: usb1-en-state {
|
||||
pins = "gpio10";
|
||||
function = "normal";
|
||||
output-high;
|
||||
power-source = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pmm8654au_3_gpios {
|
||||
@@ -347,6 +378,13 @@
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
qup_i2c11_default: qup-i2c11-state {
|
||||
pins = "gpio48", "gpio49";
|
||||
function = "qup1_se4";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
qup_i2c18_default: qup-i2c18-state {
|
||||
pins = "gpio95", "gpio96";
|
||||
function = "qup2_se4";
|
||||
@@ -426,6 +464,94 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
|
||||
vcc-supply = <&vreg_l8a>;
|
||||
vcc-max-microamp = <1100000>;
|
||||
vccq-supply = <&vreg_l4c>;
|
||||
vccq-max-microamp = <1200000>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
vdda-phy-supply = <&vreg_l4a>;
|
||||
vdda-pll-supply = <&vreg_l1c>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_en_state>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0_dwc3 {
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb_0_hsphy {
|
||||
vdda-pll-supply = <&vreg_l7a>;
|
||||
vdda18-supply = <&vreg_l6c>;
|
||||
vdda33-supply = <&vreg_l9a>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l1c>;
|
||||
vdda-pll-supply = <&vreg_l7a>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb1_en_state>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
vdda-pll-supply = <&vreg_l7a>;
|
||||
vdda18-supply = <&vreg_l6c>;
|
||||
vdda33-supply = <&vreg_l9a>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l1c>;
|
||||
vdda-pll-supply = <&vreg_l7a>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb2_en_state>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_2_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_2_hsphy {
|
||||
vdda-pll-supply = <&vreg_l7a>;
|
||||
vdda18-supply = <&vreg_l6c>;
|
||||
vdda33-supply = <&vreg_l9a>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xo_board_clk {
|
||||
clock-frequency = <38400000>;
|
||||
};
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
845
arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
Normal file
845
arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
Normal file
@@ -0,0 +1,845 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
|
||||
#include "sc7180.dtsi"
|
||||
|
||||
#include "pm6150.dtsi"
|
||||
#include "pm6150l.dtsi"
|
||||
|
||||
/delete-node/ &tz_mem;
|
||||
/delete-node/ &ipa_fw_mem;
|
||||
|
||||
/ {
|
||||
model = "Acer Aspire 1";
|
||||
compatible = "acer,aspire1", "qcom,sc7180";
|
||||
chassis-type = "laptop";
|
||||
|
||||
aliases {
|
||||
bluetooth0 = &bluetooth;
|
||||
hsuart0 = &uart3;
|
||||
serial0 = &uart8;
|
||||
wifi0 = &wifi;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
zap_mem: zap-shader@80840000 {
|
||||
reg = <0x0 0x80840000 0 0x2000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
venus_mem: venus@85b00000 {
|
||||
reg = <0x0 0x85b00000 0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mpss_mem: mpss@86000000 {
|
||||
reg = <0x0 0x86000000 0x0 0x2000000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_mem: adsp@8e400000 {
|
||||
reg = <0x0 0x8e400000 0x0 0x2800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wlan_mem: wlan@93900000 {
|
||||
reg = <0x0 0x93900000 0x0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
max98357a: audio-codec {
|
||||
compatible = "maxim,max98357a";
|
||||
sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-0 = <&_sd_mode_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&sn65dsi86_bridge 1000000>;
|
||||
enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-0 = <&soc_bkoff_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
reg_brij_1p2: bridge-1p2-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "brij_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
||||
gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <®_edp_1p2_en_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
reg_brij_1p8: bridge-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "brij_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
vin-supply = <&vreg_l8c_1p8>;
|
||||
|
||||
gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <®_edp_1p8_en_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
reg_codec_3p3: codec-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "codec_3p3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <®_audio_en_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
reg_lcm_3p3: panel-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcm_3p3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <®_lcm_en_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
reg_tp_3p3: touchpad-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "tp_3p3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <®_tp_en_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
vdda-supply = <&vreg_l3c_1p2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi0_out {
|
||||
remote-endpoint = <&sn65dsi86_in>;
|
||||
data-lanes = <0 1 2 3>;
|
||||
};
|
||||
|
||||
&dsi_phy {
|
||||
vdds-supply = <&vreg_l4a_0p8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
/* embedded-controller@76 */
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* NOTE: DSDT defines two possible touchpads, other one is
|
||||
*
|
||||
* reg = <0x15>;
|
||||
* hid-descr-addr = <0x1>;
|
||||
*/
|
||||
|
||||
touchpad@2c {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x2c>;
|
||||
hid-descr-addr = <0x20>;
|
||||
|
||||
vdd-supply = <®_tp_3p3>;
|
||||
|
||||
interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-0 = <&hid_touchpad_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
keyboard@3a {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x3a>;
|
||||
hid-descr-addr = <0x1>;
|
||||
|
||||
interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-0 = <&hid_keyboard_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
alc5682: codec@1a {
|
||||
compatible = "realtek,rt5682i";
|
||||
reg = <0x1a>;
|
||||
|
||||
#sound-dai-cells = <1>;
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
|
||||
|
||||
pinctrl-0 = <&codec_irq_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
AVDD-supply = <&vreg_l15a_1p8>;
|
||||
MICVDD-supply = <®_codec_3p3>;
|
||||
VBAT-supply = <®_codec_3p3>;
|
||||
|
||||
realtek,dmic1-data-pin = <1>;
|
||||
realtek,dmic1-clk-pin = <1>;
|
||||
realtek,jd-src = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
sn65dsi86_bridge: bridge@2c {
|
||||
compatible = "ti,sn65dsi86";
|
||||
reg = <0x2c>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
#pwm-cells = <1>;
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
|
||||
suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-0 = <&bridge_en_default>,
|
||||
<&edp_bridge_irq_default>,
|
||||
<&bridge_suspend_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vpll-supply = <®_brij_1p8>;
|
||||
vccio-supply = <®_brij_1p8>;
|
||||
vcca-supply = <®_brij_1p2>;
|
||||
vcc-supply = <®_brij_1p2>;
|
||||
|
||||
clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
|
||||
clock-names = "refclk";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
sn65dsi86_in: endpoint {
|
||||
remote-endpoint = <&dsi0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
sn65dsi86_out: endpoint {
|
||||
data-lanes = <0 1>;
|
||||
remote-endpoint = <&panel_in_edp>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
aux-bus {
|
||||
panel: panel {
|
||||
compatible = "edp-panel";
|
||||
power-supply = <®_lcm_3p3>;
|
||||
backlight = <&backlight>;
|
||||
hpd-absent-delay-ms = <200>;
|
||||
|
||||
port {
|
||||
panel_in_edp: endpoint {
|
||||
remote-endpoint = <&sn65dsi86_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
|
||||
zap-shader {
|
||||
memory-region = <&zap_mem>;
|
||||
firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn";
|
||||
};
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm6150_adc {
|
||||
thermistor@4e {
|
||||
reg = <ADC5_AMUX_THM2_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
};
|
||||
|
||||
charger-thermistor@4f {
|
||||
reg = <ADC5_AMUX_THM3_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm6150_adc_tm {
|
||||
status = "okay";
|
||||
|
||||
charger-thermistor@0 {
|
||||
reg = <0>;
|
||||
io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time-us = <200>;
|
||||
};
|
||||
|
||||
thermistor@1 {
|
||||
reg = <1>;
|
||||
io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time-us = <200>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm6150_pon {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_mpss {
|
||||
firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
pinctrl-0 = <&sdc1_default>;
|
||||
pinctrl-1 = <&sdc1_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
vmmc-supply = <&vreg_l19a_2p9>;
|
||||
vqmmc-supply = <&vreg_l12a_1p8>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
/delete-property/interrupts;
|
||||
interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-1 = <&qup_uart3_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
status = "okay";
|
||||
|
||||
bluetooth: bluetooth {
|
||||
compatible = "qcom,wcn3991-bt";
|
||||
vddio-supply = <&vreg_l10a_1p8>;
|
||||
vddxo-supply = <&vreg_l1c_1p8>;
|
||||
vddrf-supply = <&vreg_l2c_1p3>;
|
||||
vddch0-supply = <&vreg_l10c_3p3>;
|
||||
max-speed = <3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "host";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usb_hub_2_x: hub@1 {
|
||||
compatible = "usbbda,5411";
|
||||
reg = <1>;
|
||||
peer-hub = <&usb_hub_3_x>;
|
||||
};
|
||||
|
||||
usb_hub_3_x: hub@2 {
|
||||
compatible = "usbbda,411";
|
||||
reg = <2>;
|
||||
peer-hub = <&usb_hub_2_x>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
vdd-supply = <&vreg_l4a_0p8>;
|
||||
vdda-pll-supply = <&vreg_l11a_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
|
||||
qcom,imp-res-offset-value = <8>;
|
||||
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
|
||||
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
||||
qcom,bias-ctrl-value = <0x22>;
|
||||
qcom,charge-ctrl-value = <3>;
|
||||
qcom,hsdisc-trim-value = <0>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l3c_1p2>;
|
||||
vdda-pll-supply = <&vreg_l4a_0p8>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&venus {
|
||||
firmware-name = "qcom/sc7180/acer/aspire1/qcvss7180.mbn";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
|
||||
vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
|
||||
vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pm6150-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vreg_s1a_1p1: smps1 {
|
||||
regulator-min-microvolt = <1128000>;
|
||||
regulator-max-microvolt = <1128000>;
|
||||
};
|
||||
|
||||
vreg_l4a_0p8: ldo4 {
|
||||
regulator-min-microvolt = <824000>;
|
||||
regulator-max-microvolt = <928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9a_0p6: ldo9 {
|
||||
regulator-min-microvolt = <488000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10a_1p8: ldo10 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vreg_l11a_1p8: ldo11 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l13a_1p8: ldo13 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l14a_1p8: ldo14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l15a_1p8: ldo15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l16a_2p7: ldo16 {
|
||||
regulator-min-microvolt = <2496000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l17a_3p0: ldo17 {
|
||||
regulator-min-microvolt = <2920000>;
|
||||
regulator-max-microvolt = <3232000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l18a_2p8: ldo18 {
|
||||
regulator-min-microvolt = <2496000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l19a_2p9: ldo19 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pm6150l-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vreg_s8c_1p3: smps8 {
|
||||
regulator-min-microvolt = <1120000>;
|
||||
regulator-max-microvolt = <1408000>;
|
||||
};
|
||||
|
||||
vreg_l1c_1p8: ldo1 {
|
||||
regulator-min-microvolt = <1616000>;
|
||||
regulator-max-microvolt = <1984000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2c_1p3: ldo2 {
|
||||
regulator-min-microvolt = <1168000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3c_1p2: ldo3 {
|
||||
regulator-min-microvolt = <1144000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l4c_1p8: ldo4 {
|
||||
regulator-min-microvolt = <1648000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
|
||||
vreg_l5c_1p8: ldo5 {
|
||||
regulator-min-microvolt = <1648000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
|
||||
vreg_l6c_2p9: ldo6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7c_3p0: ldo7 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
|
||||
};
|
||||
|
||||
vreg_l8c_1p8: ldo8 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9c_2p9: ldo9 {
|
||||
regulator-min-microvolt = <2952000>;
|
||||
regulator-max-microvolt = <2952000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10c_3p3: ldo10 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11c_3p3: ldo11 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_bob: bob {
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <3960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qup_i2c2_default {
|
||||
drive-strength = <2>;
|
||||
|
||||
/* Has external pullup */
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
&qup_i2c4_default {
|
||||
drive-strength = <2>;
|
||||
|
||||
/* Has external pullup */
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
&qup_i2c9_default {
|
||||
drive-strength = <2>;
|
||||
|
||||
/* Has external pullup */
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
&qup_i2c10_default {
|
||||
drive-strength = <2>;
|
||||
|
||||
/* Has external pullup */
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
/*
|
||||
* The TZ seem to protect those because some boards can have
|
||||
* fingerprint sensor connected to this range. Not connected
|
||||
* on this board
|
||||
*/
|
||||
gpio-reserved-ranges = <58 5>;
|
||||
|
||||
amp_sd_mode_default: amp-sd-mode-deault-state {
|
||||
pins = "gpio23";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
bridge_en_default: bridge-en-default-state {
|
||||
pins = "gpio51";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
bridge_suspend_default: bridge-suspend-default-state {
|
||||
pins = "gpio22";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
codec_irq_default: codec-irq-deault-state {
|
||||
pins = "gpio28";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
edp_bridge_irq_default: edp-bridge-irq-default-state {
|
||||
pins = "gpio11";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
hid_keyboard_default: hid-keyboard-default-state {
|
||||
pins = "gpio33";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
hid_touchpad_default: hid-touchpad-default-state {
|
||||
pins = "gpio94";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
qup_uart3_sleep: qup-uart3-sleep-state {
|
||||
cts-pins {
|
||||
/*
|
||||
* Configure a pull-down on CTS to match the pull of
|
||||
* the Bluetooth module.
|
||||
*/
|
||||
pins = "gpio38";
|
||||
function = "gpio";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
rts-pins {
|
||||
/*
|
||||
* Configure pull-down on RTS. As RTS is active low
|
||||
* signal, pull it low to indicate the BT SoC that it
|
||||
* can wakeup the system anytime from suspend state by
|
||||
* pulling RX low (by sending wakeup bytes).
|
||||
*/
|
||||
pins = "gpio39";
|
||||
function = "gpio";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
tx-pins {
|
||||
/*
|
||||
* Configure pull-up on TX when it isn't actively driven
|
||||
* to prevent BT SoC from receiving garbage during sleep.
|
||||
*/
|
||||
pins = "gpio40";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
rx-pins {
|
||||
/*
|
||||
* Configure a pull-up on RX. This is needed to avoid
|
||||
* garbage data when the TX pin of the Bluetooth module
|
||||
* is floating which may cause spurious wakeups.
|
||||
*/
|
||||
pins = "gpio41";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state {
|
||||
pins = "gpio19";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state {
|
||||
pins = "gpio20";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
reg_lcm_en_default: reg-lcm-en-deault-state {
|
||||
pins = "gpio26";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
reg_audio_en_default: reg-audio-en-deault-state {
|
||||
pins = "gpio83";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
reg_tp_en_default: reg-tp-en-deault-state {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
soc_bkoff_default: soc-bkoff-deault-state {
|
||||
pins = "gpio10";
|
||||
function = "gpio";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
sdc1_default: sdc1-default-state {
|
||||
clk-pins {
|
||||
pins = "sdc1_clk";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cmd-pins {
|
||||
pins = "sdc1_cmd";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
data-pins {
|
||||
pins = "sdc1_data";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
rclk-pins {
|
||||
pins = "sdc1_rclk";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
sdc1_sleep: sdc1-sleep-state {
|
||||
clk-pins {
|
||||
pins = "sdc1_clk";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cmd-pins {
|
||||
pins = "sdc1_cmd";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
data-pins {
|
||||
pins = "sdc1_data";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
rclk-pins {
|
||||
pins = "sdc1_rclk";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -334,10 +334,6 @@
|
||||
vdds-supply = <&vreg_l4a_0p8>;
|
||||
};
|
||||
|
||||
&mdp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -788,6 +788,10 @@ hp_i2c: &i2c9 {
|
||||
};
|
||||
};
|
||||
|
||||
&lpasscc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lpass_cpu {
|
||||
status = "okay";
|
||||
|
||||
@@ -813,7 +817,7 @@ hp_i2c: &i2c9 {
|
||||
};
|
||||
};
|
||||
|
||||
&mdp {
|
||||
&lpass_hm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
@@ -2691,6 +2691,7 @@
|
||||
qspi: spi@88dc000 {
|
||||
compatible = "qcom,sc7180-qspi", "qcom,qspi-v1";
|
||||
reg = <0 0x088dc000 0 0x600>;
|
||||
iommus = <&apps_smmu 0x20 0x0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@@ -2988,8 +2989,6 @@
|
||||
interrupt-parent = <&mdss>;
|
||||
interrupts = <0>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
@@ -3627,6 +3626,8 @@
|
||||
power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
|
||||
#clock-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
|
||||
status = "reserved"; /* Controlled by ADSP */
|
||||
};
|
||||
|
||||
lpass_cpu: lpass@62d87000 {
|
||||
@@ -3675,6 +3676,8 @@
|
||||
|
||||
#clock-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
|
||||
status = "reserved"; /* Controlled by ADSP */
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -640,6 +640,18 @@
|
||||
};
|
||||
};
|
||||
|
||||
eud_typec: connector {
|
||||
compatible = "usb-c-connector";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
con_eud: endpoint {
|
||||
remote-endpoint = <&eud_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
/* We expect the bootloader to fill in the size */
|
||||
@@ -3421,6 +3433,7 @@
|
||||
phy-names = "usb2-phy";
|
||||
maximum-speed = "high-speed";
|
||||
usb-role-switch;
|
||||
|
||||
port {
|
||||
usb2_role_switch: endpoint {
|
||||
remote-endpoint = <&eud_ep>;
|
||||
@@ -3432,6 +3445,7 @@
|
||||
qspi: spi@88dc000 {
|
||||
compatible = "qcom,sc7280-qspi", "qcom,qspi-v1";
|
||||
reg = <0 0x088dc000 0 0x1000>;
|
||||
iommus = <&apps_smmu 0x20 0x0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@@ -3596,10 +3610,11 @@
|
||||
};
|
||||
|
||||
eud: eud@88e0000 {
|
||||
compatible = "qcom,sc7280-eud","qcom,eud";
|
||||
reg = <0 0x088e0000 0 0x2000>,
|
||||
<0 0x088e2000 0 0x1000>;
|
||||
compatible = "qcom,sc7280-eud", "qcom,eud";
|
||||
reg = <0 0x88e0000 0 0x2000>,
|
||||
<0 0x88e2000 0 0x1000>;
|
||||
interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
@@ -3610,6 +3625,7 @@
|
||||
remote-endpoint = <&usb2_role_switch>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
eud_con: endpoint {
|
||||
@@ -3619,21 +3635,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
eud_typec: connector {
|
||||
compatible = "usb-c-connector";
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
con_eud: endpoint {
|
||||
remote-endpoint = <&eud_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
nsp_noc: interconnect@a0c0000 {
|
||||
reg = <0 0x0a0c0000 0 0x10000>;
|
||||
compatible = "qcom,sc7280-nsp-noc";
|
||||
|
||||
583
arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
Normal file
583
arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
Normal file
@@ -0,0 +1,583 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2020-2023, Linaro Limited
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/gpio-keys.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include "sc8180x.dtsi"
|
||||
#include "sc8180x-pmics.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Lenovo Flex 5G";
|
||||
compatible = "lenovo,flex-5g", "qcom,sc8180x";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart13;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pmc8180c_lpg 4 1000000>;
|
||||
enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-0 = <&bl_pwm_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&hall_int_active_state>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
lid {
|
||||
gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
wakeup-source;
|
||||
wakeup-event-action = <EV_ACT_DEASSERTED>;
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
rmtfs_mem: rmtfs-region@85500000 {
|
||||
compatible = "qcom,rmtfs-mem";
|
||||
reg = <0x0 0x85500000 0x0 0x200000>;
|
||||
no-map;
|
||||
|
||||
qcom,client-id = <1>;
|
||||
qcom,vmid = <15>;
|
||||
};
|
||||
|
||||
wlan_mem: wlan-region@8bc00000 {
|
||||
reg = <0x0 0x8bc00000 0x0 0x180000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mpss_mem: mpss-region@8d800000 {
|
||||
reg = <0x0 0x8d800000 0x0 0x3000000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_mem: adsp-region@90800000 {
|
||||
reg = <0x0 0x90800000 0x0 0x1c00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
gpu_mem: gpu-region@98715000 {
|
||||
reg = <0x0 0x98715000 0x0 0x2000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cdsp_mem: cdsp-region@98900000 {
|
||||
reg = <0x0 0x98900000 0x0 0x1400000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
|
||||
vreg_s4a_1p8: pm8150-s4-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pmc8180-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
|
||||
|
||||
vreg_s5a_2p0: smps5 {
|
||||
regulator-min-microvolt = <2040000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9a_1p3: ldo9 {
|
||||
regulator-min-microvolt = <1296000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pmc8180c-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-l2-l3-supply = <&vreg_s6c_1p35>;
|
||||
vdd-bob-supply = <&vph_pwr>;
|
||||
|
||||
vreg_s6c_1p35: smps6 {
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1372000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3c_1p2: ldo3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10c_3p3: ldo10 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11c_3p3: ldo11 {
|
||||
regulator-min-microvolt = <3296000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_bob: bob {
|
||||
regulator-min-microvolt = <3296000>;
|
||||
regulator-max-microvolt = <3350000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-2 {
|
||||
compatible = "qcom,pmc8180-rpmh-regulators";
|
||||
qcom,pmic-id = "e";
|
||||
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-l2-l10-supply = <&vreg_bob>;
|
||||
vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
|
||||
vdd-l13-l16-l17-supply = <&vreg_bob>;
|
||||
|
||||
vreg_s4e_0p98: smps4 {
|
||||
regulator-min-microvolt = <992000>;
|
||||
regulator-max-microvolt = <992000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s5e_2p05: smps5 {
|
||||
regulator-min-microvolt = <2040000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l1e_0p75: ldo1 {
|
||||
regulator-min-microvolt = <752000>;
|
||||
regulator-max-microvolt = <752000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5e_0p88: ldo5 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7e_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10e_2p9: ldo10 {
|
||||
regulator-min-microvolt = <2904000>;
|
||||
regulator-max-microvolt = <2904000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l16e_3p0: ldo16 {
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
|
||||
zap-shader {
|
||||
memory-region = <&gpu_mem>;
|
||||
firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
hid@10 {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x10>;
|
||||
hid-descr-addr = <0x1>;
|
||||
|
||||
interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
hid@5 {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x5>;
|
||||
hid-descr-addr = <0x20>;
|
||||
|
||||
interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
|
||||
hid@2c {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x2c>;
|
||||
hid-descr-addr = <0x20>;
|
||||
|
||||
interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_edp {
|
||||
data-lanes = <0 1 2 3>;
|
||||
|
||||
pinctrl-0 = <&edp_hpd_active>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
aux-bus {
|
||||
panel {
|
||||
compatible = "edp-panel";
|
||||
no-hpd;
|
||||
|
||||
backlight = <&backlight>;
|
||||
|
||||
ports {
|
||||
port {
|
||||
auo_b140han06_in: endpoint {
|
||||
remote-endpoint = <&mdss_edp_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
mdss_edp_out: endpoint {
|
||||
remote-endpoint = <&auo_b140han06_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie3 {
|
||||
perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
|
||||
wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&pcie3_default_state>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3_phy {
|
||||
vdda-phy-supply = <&vreg_l5e_0p88>;
|
||||
vdda-pll-supply = <&vreg_l3c_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmc8180c_lpg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_adsp {
|
||||
memory-region = <&adsp_mem>;
|
||||
firmware-name = "qcom/sc8180x/LENOVO/82AK/qcadsp8180.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_cdsp {
|
||||
memory-region = <&cdsp_mem>;
|
||||
firmware-name = "qcom/sc8180x/LENOVO/82AK/qccdsp8180.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_mpss {
|
||||
memory-region = <&mpss_mem>;
|
||||
firmware-name = "qcom/sc8180x/LENOVO/82AK/qcmpss8180_nm.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart13 {
|
||||
pinctrl-0 = <&uart13_state>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "qcom,wcn3998-bt";
|
||||
|
||||
vddio-supply = <&vreg_s4a_1p8>;
|
||||
vddxo-supply = <&vreg_l7a_1p8>;
|
||||
vddrf-supply = <&vreg_l9a_1p3>;
|
||||
vddch0-supply = <&vreg_l11c_3p3>;
|
||||
max-speed = <3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&vreg_l10e_2p9>;
|
||||
vcc-max-microamp = <155000>;
|
||||
|
||||
vccq2-supply = <&vreg_l7e_1p8>;
|
||||
vccq2-max-microamp = <425000>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
vdda-phy-supply = <&vreg_l5e_0p88>;
|
||||
vdda-pll-supply = <&vreg_l3c_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim_hsphy {
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
vdda18-supply = <&vreg_l12a_1p8>;
|
||||
vdda33-supply = <&vreg_l16e_3p0>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l3c_1p2>;
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_sec_hsphy {
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
vdda18-supply = <&vreg_l12a_1p8>;
|
||||
vdda33-supply = <&vreg_l16e_3p0>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_sec_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l3c_1p2>;
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_sec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_sec_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
memory-region = <&wlan_mem>;
|
||||
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
|
||||
vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xo_board_clk {
|
||||
clock-frequency = <38400000>;
|
||||
};
|
||||
|
||||
/* PINCTRL */
|
||||
|
||||
&pmc8180c_gpios {
|
||||
bl_pwm_default: bl-pwm-default-state {
|
||||
en-pins {
|
||||
pins = "gpio8";
|
||||
function = "normal";
|
||||
};
|
||||
|
||||
pwm-pins {
|
||||
pins = "gpio10";
|
||||
function = "func1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
|
||||
|
||||
edp_hpd_active: epd-hpd-active-state {
|
||||
pins = "gpio10";
|
||||
function = "edp_hot";
|
||||
};
|
||||
|
||||
hall_int_active_state: hall-int-active-state {
|
||||
pins = "gpio121";
|
||||
function = "gpio";
|
||||
|
||||
input-enable;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c1_active: i2c1-active-state {
|
||||
pins = "gpio114", "gpio115";
|
||||
function = "qup1";
|
||||
|
||||
bias-pull-up = <1>;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
i2c1_hid_active: i2c1-hid-active-state {
|
||||
pins = "gpio122";
|
||||
function = "gpio";
|
||||
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
i2c7_active: i2c7-active-state {
|
||||
pins = "gpio98", "gpio99";
|
||||
function = "qup7";
|
||||
|
||||
bias-pull-up;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
i2c7_hid_active: i2c7-hid-active-state {
|
||||
pins = "gpio37", "gpio24";
|
||||
function = "gpio";
|
||||
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
pcie3_default_state: pcie3-default-state {
|
||||
clkreq-pins {
|
||||
pins = "gpio179";
|
||||
function = "pci_e3";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
reset-n-pins {
|
||||
pins = "gpio178";
|
||||
function = "gpio";
|
||||
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
wake-n-pins {
|
||||
pins = "gpio180";
|
||||
function = "gpio";
|
||||
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
uart13_state: uart13-state {
|
||||
cts-pins {
|
||||
pins = "gpio43";
|
||||
function = "qup13";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
rts-tx-pins {
|
||||
pins = "gpio44", "gpio45";
|
||||
function = "qup13";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rx-pins {
|
||||
pins = "gpio46";
|
||||
function = "qup13";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
326
arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
Normal file
326
arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
Normal file
@@ -0,0 +1,326 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2021-2023, Linaro Limited
|
||||
*/
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
#include <dt-bindings/iio/qcom,spmi-vadc.h>
|
||||
|
||||
/ {
|
||||
thermal-zones {
|
||||
pmc8180-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
polling-delay = <0>;
|
||||
|
||||
thermal-sensors = <&pmc8180_temp>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmc8180c-thermal {
|
||||
polling-delay-passive = <100>;
|
||||
polling-delay = <0>;
|
||||
|
||||
thermal-sensors = <&pmc8180c_temp>;
|
||||
|
||||
trips {
|
||||
trip0 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <0>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
trip1 {
|
||||
temperature = <115000>;
|
||||
hysteresis = <0>;
|
||||
type = "hot";
|
||||
};
|
||||
|
||||
trip2 {
|
||||
temperature = <145000>;
|
||||
hysteresis = <0>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus {
|
||||
pmc8180_0: pmic@0 {
|
||||
compatible = "qcom,pm8150", "qcom,spmi-pmic";
|
||||
reg = <0x0 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pon: power-on@800 {
|
||||
compatible = "qcom,pm8916-pon";
|
||||
reg = <0x0800>;
|
||||
pwrkey {
|
||||
compatible = "qcom,pm8941-pwrkey";
|
||||
interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
debounce = <15625>;
|
||||
bias-pull-up;
|
||||
linux,code = <KEY_POWER>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
pmc8180_temp: temp-alarm@2400 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0x2400>;
|
||||
interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
io-channels = <&pmc8180_adc ADC5_DIE_TEMP>;
|
||||
io-channel-names = "thermal";
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmc8180_adc: adc@3100 {
|
||||
compatible = "qcom,spmi-adc5";
|
||||
reg = <0x3100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#io-channel-cells = <1>;
|
||||
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
ref-gnd@0 {
|
||||
reg = <ADC5_REF_GND>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "ref_gnd";
|
||||
};
|
||||
|
||||
vref-1p25@1 {
|
||||
reg = <ADC5_1P25VREF>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "vref_1p25";
|
||||
};
|
||||
|
||||
die-temp@6 {
|
||||
reg = <ADC5_DIE_TEMP>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "die_temp";
|
||||
};
|
||||
};
|
||||
|
||||
pmc8180_adc_tm: adc-tm@3500 {
|
||||
compatible = "qcom,spmi-adc-tm5";
|
||||
reg = <0x3500>;
|
||||
interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
rtc@6000 {
|
||||
compatible = "qcom,pm8941-rtc";
|
||||
reg = <0x6000>;
|
||||
reg-names = "rtc", "alarm";
|
||||
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
|
||||
};
|
||||
|
||||
pmc8180_gpios: gpio@c000 {
|
||||
compatible = "qcom,pmc8180-gpio";
|
||||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic@1 {
|
||||
compatible = "qcom,pmc8180", "qcom,spmi-pmic";
|
||||
reg = <0x1 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
pmic@2 {
|
||||
compatible = "qcom,smb2351", "qcom,spmi-pmic";
|
||||
reg = <0x2 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adc@3100 {
|
||||
compatible = "qcom,spmi-adc-rev2";
|
||||
reg = <0x3100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#io-channel-cells = <1>;
|
||||
interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
ref-gnd@0 {
|
||||
reg = <ADC5_REF_GND>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "ref_gnd";
|
||||
};
|
||||
|
||||
vref-1p25@1 {
|
||||
reg = <ADC5_1P25VREF>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "vref_1p25";
|
||||
};
|
||||
|
||||
vcoin@85 {
|
||||
reg = <0x85>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "vcoin2";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmic@6 {
|
||||
compatible = "qcom,pm8150c", "qcom,spmi-pmic";
|
||||
reg = <0x6 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
pmic@8 {
|
||||
compatible = "qcom,pm8150", "qcom,spmi-pmic";
|
||||
reg = <0x8 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
pmic@a {
|
||||
compatible = "qcom,smb2351", "qcom,spmi-pmic";
|
||||
reg = <0xa SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
adc@3100 {
|
||||
compatible = "qcom,spmi-adc-rev2";
|
||||
reg = <0x3100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#io-channel-cells = <1>;
|
||||
interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
ref-gnd@0 {
|
||||
reg = <ADC5_REF_GND>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "ref_gnd";
|
||||
};
|
||||
|
||||
vref-1p25@1 {
|
||||
reg = <ADC5_1P25VREF>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "vref_1p25";
|
||||
};
|
||||
|
||||
vcoin@85 {
|
||||
reg = <0x85>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "vcoin";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmic@4 {
|
||||
compatible = "qcom,pm8150c", "qcom,spmi-pmic";
|
||||
reg = <0x4 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
power-on@800 {
|
||||
compatible = "qcom,pm8916-pon";
|
||||
reg = <0x0800>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pmc8180c_temp: temp-alarm@2400 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0x2400>;
|
||||
interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
|
||||
io-channels = <&pmc8180c_adc ADC5_DIE_TEMP>;
|
||||
io-channel-names = "thermal";
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
pmc8180c_adc: adc@3100 {
|
||||
compatible = "qcom,spmi-adc5";
|
||||
reg = <0x3100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#io-channel-cells = <1>;
|
||||
interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
ref-gnd@0 {
|
||||
reg = <ADC5_REF_GND>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "ref_gnd";
|
||||
};
|
||||
|
||||
vref-1p25@1 {
|
||||
reg = <ADC5_1P25VREF>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "vref_1p25";
|
||||
};
|
||||
|
||||
die-temp@6 {
|
||||
reg = <ADC5_DIE_TEMP>;
|
||||
qcom,pre-scaling = <1 1>;
|
||||
label = "die_temp";
|
||||
};
|
||||
};
|
||||
|
||||
pmc8180c_adc_tm: adc-tm@3500 {
|
||||
compatible = "qcom,spmi-adc-tm5";
|
||||
reg = <0x3500>;
|
||||
interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pmc8180c_gpios: gpio@c000 {
|
||||
compatible = "qcom,pmc8180c-gpio";
|
||||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic@5 {
|
||||
compatible = "qcom,pmc8180c", "qcom,spmi-pmic";
|
||||
reg = <0x5 SPMI_USID>;
|
||||
|
||||
pmc8180c_lpg: lpg {
|
||||
compatible = "qcom,pmc8180c-lpg";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#pwm-cells = <2>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
706
arch/arm64/boot/dts/qcom/sc8180x-primus.dts
Normal file
706
arch/arm64/boot/dts/qcom/sc8180x-primus.dts
Normal file
@@ -0,0 +1,706 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2020-2023, Linaro Limited
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/gpio-keys.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include "sc8180x.dtsi"
|
||||
#include "sc8180x-pmics.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm SC8180x Primus";
|
||||
compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart12;
|
||||
serial1 = &uart13;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pmc8180c_lpg 4 1000000>;
|
||||
enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bl_pwm_default>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hall_int_active_state>;
|
||||
|
||||
lid-switch {
|
||||
gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
wakeup-source;
|
||||
wakeup-event-action = <EV_ACT_DEASSERTED>;
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
rmtfs_mem: rmtfs-region@85500000 {
|
||||
compatible = "qcom,rmtfs-mem";
|
||||
reg = <0x0 0x85500000 0x0 0x200000>;
|
||||
no-map;
|
||||
|
||||
qcom,client-id = <1>;
|
||||
qcom,vmid = <15>;
|
||||
};
|
||||
|
||||
wlan_mem: wlan-region@8bc00000 {
|
||||
reg = <0x0 0x8bc00000 0x0 0x180000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_mem: adsp-region@96e00000 {
|
||||
reg = <0x0 0x96e00000 0x0 0x1c00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mpss_mem: mpss-region@8d800000 {
|
||||
reg = <0x0 0x8d800000 0x0 0x9600000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
gpu_mem: gpu-region@98a00000 {
|
||||
reg = <0x0 0x98a00000 0x0 0x2000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
reserved-region@9a500000 {
|
||||
reg = <0x0 0x9a500000 0x0 0x600000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
vreg_nvme_0p9: nvme-0p9-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_nvme_0p9";
|
||||
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_nvme_3p3: nvme-3p3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_nvme_3p3";
|
||||
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&pmc8180c_gpios 11 0>;
|
||||
enable-active-high;
|
||||
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_kb_tp_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
regulator-always-on;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&kb_tp_3v3_en_active_state>;
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
|
||||
vreg_s4a_1p8: pm8150-s4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pmc8180-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
|
||||
|
||||
vreg_s5a_2p0: smps5 {
|
||||
regulator-min-microvolt = <2040000>;
|
||||
regulator-max-microvolt = <2100000>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9a_1p3: ldo9 {
|
||||
regulator-min-microvolt = <1296000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pmc8180c-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-l2-l3-supply = <&vreg_s6c_1p35>;
|
||||
vdd-bob-supply = <&vph_pwr>;
|
||||
|
||||
vreg_s6c_1p35: smps6 {
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1372000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s8c_1p8: smps8 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_l3c_1p2: ldo3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l4c_3p3: ldo4 {
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10c_3p3: ldo10 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11c_3p3: ldo11 {
|
||||
regulator-min-microvolt = <3296000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_bob: bob {
|
||||
regulator-min-microvolt = <3296000>;
|
||||
regulator-max-microvolt = <3350000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-2 {
|
||||
compatible = "qcom,pmc8180-rpmh-regulators";
|
||||
qcom,pmic-id = "e";
|
||||
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-l2-l10-supply = <&vreg_bob>;
|
||||
vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
|
||||
vdd-l13-l16-l17-supply = <&vreg_bob>;
|
||||
|
||||
vreg_s4e_0p98: smps4 {
|
||||
regulator-min-microvolt = <992000>;
|
||||
regulator-max-microvolt = <992000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s5e_2p05: smps5 {
|
||||
regulator-min-microvolt = <2040000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l1e_0p75: ldo1 {
|
||||
regulator-min-microvolt = <752000>;
|
||||
regulator-max-microvolt = <752000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5e_0p88: ldo5 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7e_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10e_2p9: ldo10 {
|
||||
regulator-min-microvolt = <2904000>;
|
||||
regulator-max-microvolt = <2904000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12e: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l16e_3p0: ldo16 {
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dispcc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
|
||||
zap-shader {
|
||||
memory-region = <&gpu_mem>;
|
||||
firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ts_i2c_active_state>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
touchscreen@10 {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x10>;
|
||||
hid-descr-addr = <0x1>;
|
||||
|
||||
vdd-supply = <&vreg_l4c_3p3>;
|
||||
vddl-supply = <&vreg_l12e>;
|
||||
|
||||
post-power-on-delay-ms = <20>;
|
||||
|
||||
interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ts_active_state>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&aux_i2c_active_state>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
touchpad@15 {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x15>;
|
||||
hid-descr-addr = <0x1>;
|
||||
|
||||
interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tp_int_active_state>;
|
||||
|
||||
vdd-supply = <&vdd_kb_tp_3v3>;
|
||||
};
|
||||
|
||||
keyboard@3a {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x3a>;
|
||||
hid-descr-addr = <0x1>;
|
||||
interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&kb_int_active_state>;
|
||||
|
||||
vdd-supply = <&vdd_kb_tp_3v3>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_edp {
|
||||
data-lanes = <0 1 2 3>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&edp_hpd_active>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
aux-bus {
|
||||
panel {
|
||||
compatible = "edp-panel";
|
||||
|
||||
backlight = <&backlight>;
|
||||
|
||||
ports {
|
||||
port {
|
||||
auo_b133han05_in: endpoint {
|
||||
remote-endpoint = <&mdss_edp_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
mdss_edp_out: endpoint {
|
||||
remote-endpoint = <&auo_b133han05_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
|
||||
wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_default_state>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1_phy {
|
||||
vdda-phy-supply = <&vreg_l5e_0p88>;
|
||||
vdda-pll-supply = <&vreg_l3c_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmc8180c_lpg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_adsp {
|
||||
memory-region = <&adsp_mem>;
|
||||
firmware-name = "qcom/sc8180x/qcadsp8180.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_mpss {
|
||||
memory-region = <&mpss_mem>;
|
||||
firmware-name = "qcom/sc8180x/qcmpss8180.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart12 {
|
||||
compatible = "qcom,geni-debug-uart";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart13 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart13_state>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "qcom,wcn3998-bt";
|
||||
|
||||
vddio-supply = <&vreg_s4a_1p8>;
|
||||
vddxo-supply = <&vreg_l7a_1p8>;
|
||||
vddrf-supply = <&vreg_l9a_1p3>;
|
||||
vddch0-supply = <&vreg_l11c_3p3>;
|
||||
max-speed = <3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&vreg_l10e_2p9>;
|
||||
vcc-max-microamp = <155000>;
|
||||
|
||||
vccq2-supply = <&vreg_l7e_1p8>;
|
||||
vccq2-max-microamp = <425000>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
vdda-phy-supply = <&vreg_l5e_0p88>;
|
||||
vdda-pll-supply = <&vreg_l3c_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim_hsphy {
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
vdda18-supply = <&vreg_l12a_1p8>;
|
||||
vdda33-supply = <&vreg_l16e_3p0>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l3c_1p2>;
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_prim_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_sec_hsphy {
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
vdda18-supply = <&vreg_l12a_1p8>;
|
||||
vdda33-supply = <&vreg_l16e_3p0>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_sec_qmpphy {
|
||||
vdda-phy-supply = <&vreg_l3c_1p2>;
|
||||
vdda-pll-supply = <&vreg_l5e_0p88>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_sec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_sec_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
memory-region = <&wlan_mem>;
|
||||
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
|
||||
vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xo_board_clk {
|
||||
clock-frequency = <38400000>;
|
||||
};
|
||||
|
||||
/* PINCTRL */
|
||||
|
||||
&pmc8180c_gpios {
|
||||
bl_pwm_default: bl-pwm-default-state {
|
||||
en-pins {
|
||||
pins = "gpio8";
|
||||
function = "normal";
|
||||
};
|
||||
|
||||
pwm-pins {
|
||||
pins = "gpio10";
|
||||
function = "func1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
|
||||
|
||||
aux_i2c_active_state: aux-i2c-active-state {
|
||||
pins = "gpio98", "gpio99";
|
||||
function = "qup7";
|
||||
|
||||
bias-disable;
|
||||
drive-strength = <16>;
|
||||
};
|
||||
|
||||
edp_hpd_active: epd-hpd-active-state {
|
||||
pins = "gpio10";
|
||||
function = "edp_hot";
|
||||
};
|
||||
|
||||
hall_int_active_state: hall-int-active-state {
|
||||
pins = "gpio121";
|
||||
function = "gpio";
|
||||
|
||||
input-enable;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
kb_int_active_state: kb-int-active-state {
|
||||
int-n-pins {
|
||||
pins = "gpio37";
|
||||
function = "gpio";
|
||||
|
||||
bias-pull-up;
|
||||
intput-enable;
|
||||
};
|
||||
|
||||
kp-disable-pins {
|
||||
pins = "gpio135";
|
||||
function = "gpio";
|
||||
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state {
|
||||
pins = "gpio4";
|
||||
function = "gpio";
|
||||
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pcie2_default_state: pcie2-default-state {
|
||||
clkreq-pins {
|
||||
pins = "gpio176";
|
||||
function = "pci_e2";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
reset-n-pins {
|
||||
pins = "gpio175";
|
||||
function = "gpio";
|
||||
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
wake-n-pins {
|
||||
pins = "gpio177";
|
||||
function = "gpio";
|
||||
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
tp_int_active_state: tp-int-active-state {
|
||||
tp-int-pins {
|
||||
pins = "gpio24";
|
||||
function = "gpio";
|
||||
|
||||
bias-disable;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
tp-close-n-pins {
|
||||
pins = "gpio116";
|
||||
function = "gpio";
|
||||
|
||||
bias-disable;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
ts_active_state: ts-active-state {
|
||||
int-n-pins {
|
||||
pins = "gpio122";
|
||||
function = "gpio";
|
||||
|
||||
input-enable;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
reset-n-pins {
|
||||
pins = "gpio54";
|
||||
function = "gpio";
|
||||
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
ts_i2c_active_state: ts-i2c-active-state {
|
||||
pins = "gpio114", "gpio115";
|
||||
function = "qup1";
|
||||
|
||||
/* External pull up */
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
uart13_state: uart13-state {
|
||||
cts-pins {
|
||||
pins = "gpio43";
|
||||
function = "qup13";
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
rts-tx-pins {
|
||||
pins = "gpio44", "gpio45";
|
||||
function = "qup13";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rx-pins {
|
||||
pins = "gpio46";
|
||||
function = "qup13";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
4030
arch/arm64/boot/dts/qcom/sc8180x.dtsi
Normal file
4030
arch/arm64/boot/dts/qcom/sc8180x.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
@@ -64,7 +64,7 @@
|
||||
reg = <1>;
|
||||
|
||||
pmic_glink_con0_ss: endpoint {
|
||||
remote-endpoint = <&mdss0_dp0_out>;
|
||||
remote-endpoint = <&usb_0_qmpphy_out>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -99,7 +99,7 @@
|
||||
reg = <1>;
|
||||
|
||||
pmic_glink_con1_ss: endpoint {
|
||||
remote-endpoint = <&mdss0_dp1_out>;
|
||||
remote-endpoint = <&usb_1_qmpphy_out>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -308,6 +308,13 @@
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6c: ldo6 {
|
||||
regulator-name = "vreg_l6c";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7c: ldo7 {
|
||||
regulator-name = "vreg_l7c";
|
||||
regulator-min-microvolt = <2504000>;
|
||||
@@ -318,6 +325,13 @@
|
||||
RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9c: ldo9 {
|
||||
regulator-name = "vreg_l9c";
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l13c: ldo13 {
|
||||
regulator-name = "vreg_l13c";
|
||||
regulator-min-microvolt = <3072000>;
|
||||
@@ -386,7 +400,7 @@
|
||||
|
||||
&mdss0_dp0_out {
|
||||
data-lanes = <0 1>;
|
||||
remote-endpoint = <&pmic_glink_con0_ss>;
|
||||
remote-endpoint = <&usb_0_qmpphy_dp_in>;
|
||||
};
|
||||
|
||||
&mdss0_dp1 {
|
||||
@@ -395,7 +409,7 @@
|
||||
|
||||
&mdss0_dp1_out {
|
||||
data-lanes = <0 1>;
|
||||
remote-endpoint = <&pmic_glink_con1_ss>;
|
||||
remote-endpoint = <&usb_1_qmpphy_dp_in>;
|
||||
};
|
||||
|
||||
&mdss0_dp3 {
|
||||
@@ -600,6 +614,19 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdc2 {
|
||||
pinctrl-0 = <&sdc2_default_state>;
|
||||
pinctrl-1 = <&sdc2_sleep_state>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
vmmc-supply = <&vreg_l9c>;
|
||||
vqmmc-supply = <&vreg_l6c>;
|
||||
|
||||
cd-gpios = <&tlmm 131 GPIO_ACTIVE_LOW>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart17 {
|
||||
compatible = "qcom,geni-debug-uart";
|
||||
|
||||
@@ -644,9 +671,19 @@
|
||||
vdda-phy-supply = <&vreg_l9d>;
|
||||
vdda-pll-supply = <&vreg_l4d>;
|
||||
|
||||
orientation-switch;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0_qmpphy_dp_in {
|
||||
remote-endpoint = <&mdss0_dp0_out>;
|
||||
};
|
||||
|
||||
&usb_0_qmpphy_out {
|
||||
remote-endpoint = <&pmic_glink_con0_ss>;
|
||||
};
|
||||
|
||||
&usb_0_role_switch {
|
||||
remote-endpoint = <&pmic_glink_con0_hs>;
|
||||
};
|
||||
@@ -671,9 +708,19 @@
|
||||
vdda-phy-supply = <&vreg_l4b>;
|
||||
vdda-pll-supply = <&vreg_l3b>;
|
||||
|
||||
orientation-switch;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_qmpphy_dp_in {
|
||||
remote-endpoint = <&mdss0_dp1_out>;
|
||||
};
|
||||
|
||||
&usb_1_qmpphy_out {
|
||||
remote-endpoint = <&pmic_glink_con1_ss>;
|
||||
};
|
||||
|
||||
&usb_1_role_switch {
|
||||
remote-endpoint = <&pmic_glink_con1_hs>;
|
||||
};
|
||||
@@ -842,6 +889,60 @@
|
||||
};
|
||||
};
|
||||
|
||||
sdc2_default_state: sdc2-default-state {
|
||||
clk-pins {
|
||||
pins = "sdc2_clk";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cmd-pins {
|
||||
pins = "sdc2_cmd";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
data-pins {
|
||||
pins = "sdc2_data";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
card-detect-pins {
|
||||
pins = "gpio131";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
sdc2_sleep_state: sdc2-sleep-state {
|
||||
clk-pins {
|
||||
pins = "sdc2_clk";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cmd-pins {
|
||||
pins = "sdc2_cmd";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
data-pins {
|
||||
pins = "sdc2_data";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
card-detect-pins {
|
||||
pins = "gpio131";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
tpad_default: tpad-default-state {
|
||||
int-n-pins {
|
||||
pins = "gpio182";
|
||||
|
||||
@@ -106,7 +106,7 @@
|
||||
reg = <1>;
|
||||
|
||||
pmic_glink_con0_ss: endpoint {
|
||||
remote-endpoint = <&mdss0_dp0_out>;
|
||||
remote-endpoint = <&usb_0_qmpphy_out>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -141,7 +141,7 @@
|
||||
reg = <1>;
|
||||
|
||||
pmic_glink_con1_ss: endpoint {
|
||||
remote-endpoint = <&mdss0_dp1_out>;
|
||||
remote-endpoint = <&usb_1_qmpphy_out>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -528,7 +528,7 @@
|
||||
|
||||
&mdss0_dp0_out {
|
||||
data-lanes = <0 1>;
|
||||
remote-endpoint = <&pmic_glink_con0_ss>;
|
||||
remote-endpoint = <&usb_0_qmpphy_dp_in>;
|
||||
};
|
||||
|
||||
&mdss0_dp1 {
|
||||
@@ -537,7 +537,7 @@
|
||||
|
||||
&mdss0_dp1_out {
|
||||
data-lanes = <0 1>;
|
||||
remote-endpoint = <&pmic_glink_con1_ss>;
|
||||
remote-endpoint = <&usb_1_qmpphy_dp_in>;
|
||||
};
|
||||
|
||||
&mdss0_dp3 {
|
||||
@@ -1114,9 +1114,19 @@
|
||||
vdda-phy-supply = <&vreg_l9d>;
|
||||
vdda-pll-supply = <&vreg_l4d>;
|
||||
|
||||
orientation-switch;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0_qmpphy_dp_in {
|
||||
remote-endpoint = <&mdss0_dp0_out>;
|
||||
};
|
||||
|
||||
&usb_0_qmpphy_out {
|
||||
remote-endpoint = <&pmic_glink_con0_ss>;
|
||||
};
|
||||
|
||||
&usb_0_role_switch {
|
||||
remote-endpoint = <&pmic_glink_con0_hs>;
|
||||
};
|
||||
@@ -1141,9 +1151,19 @@
|
||||
vdda-phy-supply = <&vreg_l4b>;
|
||||
vdda-pll-supply = <&vreg_l3b>;
|
||||
|
||||
orientation-switch;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_qmpphy_dp_in {
|
||||
remote-endpoint = <&mdss0_dp1_out>;
|
||||
};
|
||||
|
||||
&usb_1_qmpphy_out {
|
||||
remote-endpoint = <&pmic_glink_con1_ss>;
|
||||
};
|
||||
|
||||
&usb_1_role_switch {
|
||||
remote-endpoint = <&pmic_glink_con1_hs>;
|
||||
};
|
||||
|
||||
@@ -768,6 +768,36 @@
|
||||
ranges = <0 0 0 0 0x10 0>;
|
||||
dma-ranges = <0 0 0 0 0x10 0>;
|
||||
|
||||
ethernet0: ethernet@20000 {
|
||||
compatible = "qcom,sc8280xp-ethqos";
|
||||
reg = <0x0 0x00020000 0x0 0x10000>,
|
||||
<0x0 0x00036000 0x0 0x100>;
|
||||
reg-names = "stmmaceth", "rgmii";
|
||||
|
||||
clocks = <&gcc GCC_EMAC0_AXI_CLK>,
|
||||
<&gcc GCC_EMAC0_SLV_AHB_CLK>,
|
||||
<&gcc GCC_EMAC0_PTP_CLK>,
|
||||
<&gcc GCC_EMAC0_RGMII_CLK>;
|
||||
clock-names = "stmmaceth",
|
||||
"pclk",
|
||||
"ptp_ref",
|
||||
"rgmii";
|
||||
|
||||
interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 936 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq", "eth_lpi";
|
||||
|
||||
iommus = <&apps_smmu 0x4c0 0xf>;
|
||||
power-domains = <&gcc EMAC_0_GDSC>;
|
||||
|
||||
snps,tso;
|
||||
snps,pbl = <32>;
|
||||
rx-fifo-depth = <4096>;
|
||||
tx-fifo-depth = <4096>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gcc: clock-controller@100000 {
|
||||
compatible = "qcom,gcc-sc8280xp";
|
||||
reg = <0x0 0x00100000 0x0 0x1f0000>;
|
||||
@@ -2815,6 +2845,49 @@
|
||||
};
|
||||
};
|
||||
|
||||
sdc2: mmc@8804000 {
|
||||
compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5";
|
||||
reg = <0 0x08804000 0 0x1000>;
|
||||
|
||||
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "hc_irq", "pwr_irq";
|
||||
|
||||
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
|
||||
<&gcc GCC_SDCC2_APPS_CLK>,
|
||||
<&rpmhcc RPMH_CXO_CLK>;
|
||||
clock-names = "iface", "core", "xo";
|
||||
resets = <&gcc GCC_SDCC2_BCR>;
|
||||
interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
|
||||
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
|
||||
interconnect-names = "sdhc-ddr","cpu-sdhc";
|
||||
iommus = <&apps_smmu 0x4e0 0x0>;
|
||||
power-domains = <&rpmhpd SC8280XP_CX>;
|
||||
operating-points-v2 = <&sdc2_opp_table>;
|
||||
bus-width = <4>;
|
||||
dma-coherent;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
sdc2_opp_table: opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
required-opps = <&rpmhpd_opp_low_svs>;
|
||||
opp-peak-kBps = <1800000 400000>;
|
||||
opp-avg-kBps = <100000 0>;
|
||||
};
|
||||
|
||||
opp-202000000 {
|
||||
opp-hz = /bits/ 64 <202000000>;
|
||||
required-opps = <&rpmhpd_opp_svs_l1>;
|
||||
opp-peak-kBps = <5400000 1600000>;
|
||||
opp-avg-kBps = <200000 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb_0_qmpphy: phy@88eb000 {
|
||||
compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
|
||||
reg = <0 0x088eb000 0 0x4000>;
|
||||
@@ -2835,6 +2908,23 @@
|
||||
#phy-cells = <1>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
usb_0_qmpphy_out: endpoint {};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
|
||||
usb_0_qmpphy_dp_in: endpoint {};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb_1_hsphy: phy@8902000 {
|
||||
@@ -2871,6 +2961,23 @@
|
||||
#phy-cells = <1>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
usb_1_qmpphy_out: endpoint {};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
|
||||
usb_1_qmpphy_dp_in: endpoint {};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdss1_dp0_phy: phy@8909a00 {
|
||||
@@ -3895,7 +4002,7 @@
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
gic-its@17a40000 {
|
||||
msi-controller@17a40000 {
|
||||
compatible = "arm,gic-v3-its";
|
||||
reg = <0 0x17a40000 0 0x20000>;
|
||||
msi-controller;
|
||||
@@ -4706,6 +4813,36 @@
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ethernet1: ethernet@23000000 {
|
||||
compatible = "qcom,sc8280xp-ethqos";
|
||||
reg = <0x0 0x23000000 0x0 0x10000>,
|
||||
<0x0 0x23016000 0x0 0x100>;
|
||||
reg-names = "stmmaceth", "rgmii";
|
||||
|
||||
clocks = <&gcc GCC_EMAC1_AXI_CLK>,
|
||||
<&gcc GCC_EMAC1_SLV_AHB_CLK>,
|
||||
<&gcc GCC_EMAC1_PTP_CLK>,
|
||||
<&gcc GCC_EMAC1_RGMII_CLK>;
|
||||
clock-names = "stmmaceth",
|
||||
"pclk",
|
||||
"ptp_ref",
|
||||
"rgmii";
|
||||
|
||||
interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 919 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq", "eth_lpi";
|
||||
|
||||
iommus = <&apps_smmu 0x40 0xf>;
|
||||
power-domains = <&gcc EMAC_1_GDSC>;
|
||||
|
||||
snps,tso;
|
||||
snps,pbl = <32>;
|
||||
rx-fifo-depth = <4096>;
|
||||
tx-fifo-depth = <4096>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
sound: sound {
|
||||
|
||||
@@ -138,11 +138,6 @@
|
||||
no-map;
|
||||
};
|
||||
|
||||
reserved@85800000 {
|
||||
reg = <0x00 0x85800000 0x00 0x3700000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cont_splash_mem: splash@9d400000 {
|
||||
reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
|
||||
no-map;
|
||||
@@ -256,6 +251,10 @@
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
|
||||
&qhee_code {
|
||||
reg = <0x00 0x85800000 0x00 0x3700000>;
|
||||
};
|
||||
|
||||
&qusb2phy0 {
|
||||
status = "okay";
|
||||
|
||||
|
||||
@@ -548,7 +548,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
soc@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0 0xffffffff>;
|
||||
@@ -1892,7 +1892,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
camss: camss@ca00000 {
|
||||
camss: camss@ca00020 {
|
||||
compatible = "qcom,sdm660-camss";
|
||||
reg = <0x0ca00020 0x10>,
|
||||
<0x0ca30000 0x100>,
|
||||
|
||||
@@ -4,8 +4,10 @@
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "sdm632.dtsi"
|
||||
#include "pm8953.dtsi"
|
||||
#include "pmi632.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Fairphone 3";
|
||||
@@ -83,6 +85,33 @@
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
|
||||
&pmi632_lpg {
|
||||
status = "okay";
|
||||
|
||||
multi-led {
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@3 {
|
||||
reg = <3>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&pm8953_l8>;
|
||||
|
||||
@@ -419,6 +419,9 @@
|
||||
status = "okay";
|
||||
vdda-supply = <&vreg_l26a_1p2>;
|
||||
|
||||
qcom,dual-dsi-mode;
|
||||
qcom,master-dsi;
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
endpoint {
|
||||
@@ -434,6 +437,31 @@
|
||||
vdds-supply = <&vreg_l1a_0p875>;
|
||||
};
|
||||
|
||||
&dsi1 {
|
||||
vdda-supply = <&vreg_l26a_1p2>;
|
||||
|
||||
qcom,dual-dsi-mode;
|
||||
|
||||
/* DSI1 is slave, so use DSI0 clocks */
|
||||
assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
endpoint {
|
||||
remote-endpoint = <<9611_b>;
|
||||
data-lanes = <0 1 2 3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi1_phy {
|
||||
vdds-supply = <&vreg_l1a_0p875>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gcc {
|
||||
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
||||
<GCC_QSPI_CORE_CLK_SRC>,
|
||||
@@ -493,6 +521,14 @@
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
lt9611_b: endpoint {
|
||||
remote-endpoint = <&dsi1_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
|
||||
|
||||
@@ -554,6 +554,28 @@
|
||||
};
|
||||
};
|
||||
|
||||
&pmi8998_flash {
|
||||
status = "okay";
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
led-sources = <1>;
|
||||
led-max-microamp = <100000>;
|
||||
flash-max-microamp = <1100000>;
|
||||
flash-max-timeout-us = <1280000>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_YELLOW>;
|
||||
led-sources = <2>;
|
||||
led-max-microamp = <100000>;
|
||||
flash-max-microamp = <1100000>;
|
||||
flash-max-timeout-us = <1280000>;
|
||||
};
|
||||
};
|
||||
|
||||
&qup_uart9_rx {
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
|
||||
@@ -483,6 +483,7 @@
|
||||
};
|
||||
|
||||
rmi4-f12@12 {
|
||||
reg = <0x12>;
|
||||
syna,rezero-wait-ms = <0xc8>;
|
||||
syna,clip-x-high = <0x438>;
|
||||
syna,clip-y-high = <0x870>;
|
||||
|
||||
@@ -3890,6 +3890,7 @@
|
||||
qspi: spi@88df000 {
|
||||
compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
|
||||
reg = <0 0x088df000 0 0x600>;
|
||||
iommus = <&apps_smmu 0x160 0x0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@@ -4229,7 +4230,7 @@
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
camss: camss@a00000 {
|
||||
camss: camss@acb3000 {
|
||||
compatible = "qcom,sdm845-camss";
|
||||
|
||||
reg = <0 0x0acb3000 0 0x1000>,
|
||||
@@ -5212,7 +5213,7 @@
|
||||
};
|
||||
|
||||
slimbam: dma-controller@17184000 {
|
||||
compatible = "qcom,bam-v1.7.0";
|
||||
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
|
||||
qcom,controlled-remotely;
|
||||
reg = <0 0x17184000 0 0x2a000>;
|
||||
num-channels = <31>;
|
||||
|
||||
@@ -242,6 +242,9 @@
|
||||
&usb_dwc3 {
|
||||
maximum-speed = "high-speed";
|
||||
dr_mode = "peripheral";
|
||||
|
||||
phys = <&usb_hsphy>;
|
||||
phy-names = "usb2-phy";
|
||||
};
|
||||
|
||||
&usb_hsphy {
|
||||
|
||||
250
arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
Normal file
250
arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
Normal file
@@ -0,0 +1,250 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sm6115.dtsi"
|
||||
#include "pm6125.dtsi"
|
||||
#include <dt-bindings/arm/qcom,ids.h>
|
||||
|
||||
/ {
|
||||
model = "F(x)tec Pro1X (QX1050)";
|
||||
compatible = "fxtec,pro1x", "qcom,sm6115";
|
||||
chassis-type = "handset";
|
||||
|
||||
qcom,msm-id = <QCOM_ID_SM6115 0x10000>;
|
||||
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
framebuffer0: framebuffer@5c000000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>;
|
||||
width = <1080>;
|
||||
height = <2160>;
|
||||
stride = <(1080 * 4)>;
|
||||
format = "a8r8g8b8";
|
||||
clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&vol_up_n>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-volume-up {
|
||||
label = "Volume Up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <15>;
|
||||
linux,can-disable;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dispcc {
|
||||
/* HACK: disable until a panel driver is ready to retain simplefb */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pm6125_gpios {
|
||||
vol_up_n: vol-up-n-state {
|
||||
pins = "gpio5";
|
||||
function = "normal";
|
||||
power-source = <0>;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
&pon_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pon_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
regulators-0 {
|
||||
compatible = "qcom,rpm-pm6125-regulators";
|
||||
|
||||
pm6125_s6a: s6 {
|
||||
regulator-min-microvolt = <304000>;
|
||||
regulator-max-microvolt = <1456000>;
|
||||
};
|
||||
|
||||
pm6125_s7a: s7 {
|
||||
regulator-min-microvolt = <1280000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
};
|
||||
|
||||
pm6125_s8a: s8 {
|
||||
regulator-min-microvolt = <1064000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
};
|
||||
|
||||
pm6125_l1a: l1 {
|
||||
regulator-min-microvolt = <952000>;
|
||||
regulator-max-microvolt = <1152000>;
|
||||
};
|
||||
|
||||
pm6125_l4a: l4 {
|
||||
regulator-min-microvolt = <488000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
pm6125_l5a: l5 {
|
||||
regulator-min-microvolt = <1648000>;
|
||||
regulator-max-microvolt = <3056000>;
|
||||
};
|
||||
|
||||
pm6125_l6a: l6 {
|
||||
regulator-min-microvolt = <576000>;
|
||||
regulator-max-microvolt = <656000>;
|
||||
};
|
||||
|
||||
pm6125_l7a: l7 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
};
|
||||
|
||||
pm6125_l8a: l8 {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <728000>;
|
||||
};
|
||||
|
||||
pm6125_l9a: l9 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
};
|
||||
|
||||
pm6125_l10a: l10 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <1904000>;
|
||||
};
|
||||
|
||||
pm6125_l11a: l11 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <1952000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm6125_l12a: l12 {
|
||||
regulator-min-microvolt = <1624000>;
|
||||
regulator-max-microvolt = <1984000>;
|
||||
};
|
||||
|
||||
pm6125_l13a: l13 {
|
||||
regulator-min-microvolt = <1504000>;
|
||||
regulator-max-microvolt = <1952000>;
|
||||
};
|
||||
|
||||
pm6125_l14a: l14 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <1904000>;
|
||||
};
|
||||
|
||||
pm6125_l15a: l15 {
|
||||
regulator-min-microvolt = <2920000>;
|
||||
regulator-max-microvolt = <3232000>;
|
||||
};
|
||||
|
||||
pm6125_l16a: l16 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <1904000>;
|
||||
};
|
||||
|
||||
pm6125_l17a: l17 {
|
||||
regulator-min-microvolt = <1152000>;
|
||||
regulator-max-microvolt = <1384000>;
|
||||
};
|
||||
|
||||
pm6125_l18a: l18 {
|
||||
regulator-min-microvolt = <1104000>;
|
||||
regulator-max-microvolt = <1312000>;
|
||||
};
|
||||
|
||||
pm6125_l19a: l19 {
|
||||
regulator-min-microvolt = <1624000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
};
|
||||
|
||||
pm6125_l20a: l20 {
|
||||
regulator-min-microvolt = <1624000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
};
|
||||
|
||||
pm6125_l21a: l21 {
|
||||
regulator-min-microvolt = <2400000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
};
|
||||
|
||||
pm6125_l22a: l22 {
|
||||
regulator-min-microvolt = <2952000>;
|
||||
regulator-max-microvolt = <3304000>;
|
||||
};
|
||||
|
||||
pm6125_l23a: l23 {
|
||||
regulator-min-microvolt = <3200000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
};
|
||||
|
||||
pm6125_l24a: l24 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sleep_clk {
|
||||
clock-frequency = <32764>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <14 4>;
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
vcc-supply = <&pm6125_l24a>;
|
||||
vcc-max-microamp = <600000>;
|
||||
vccq2-supply = <&pm6125_l11a>;
|
||||
vccq2-max-microamp = <600000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
vdda-phy-supply = <&pm6125_l4a>;
|
||||
vdda-pll-supply = <&pm6125_l12a>;
|
||||
vddp-ref-clk-supply = <&pm6125_l18a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_dwc3 {
|
||||
maximum-speed = "high-speed";
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb_hsphy {
|
||||
vdd-supply = <&pm6125_l4a>;
|
||||
vdda-pll-supply = <&pm6125_l12a>;
|
||||
vdda-phy-dpdm-supply = <&pm6125_l15a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xo_board {
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
@@ -47,6 +47,8 @@
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&L2_0>;
|
||||
qcom,freq-domain = <&cpufreq_hw 0>;
|
||||
power-domains = <&CPU_PD0>;
|
||||
power-domain-names = "psci";
|
||||
L2_0: l2-cache {
|
||||
compatible = "cache";
|
||||
cache-level = <2>;
|
||||
@@ -63,6 +65,8 @@
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&L2_0>;
|
||||
qcom,freq-domain = <&cpufreq_hw 0>;
|
||||
power-domains = <&CPU_PD1>;
|
||||
power-domain-names = "psci";
|
||||
};
|
||||
|
||||
CPU2: cpu@2 {
|
||||
@@ -75,6 +79,8 @@
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&L2_0>;
|
||||
qcom,freq-domain = <&cpufreq_hw 0>;
|
||||
power-domains = <&CPU_PD2>;
|
||||
power-domain-names = "psci";
|
||||
};
|
||||
|
||||
CPU3: cpu@3 {
|
||||
@@ -87,6 +93,8 @@
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&L2_0>;
|
||||
qcom,freq-domain = <&cpufreq_hw 0>;
|
||||
power-domains = <&CPU_PD3>;
|
||||
power-domain-names = "psci";
|
||||
};
|
||||
|
||||
CPU4: cpu@100 {
|
||||
@@ -99,6 +107,8 @@
|
||||
dynamic-power-coefficient = <282>;
|
||||
next-level-cache = <&L2_1>;
|
||||
qcom,freq-domain = <&cpufreq_hw 1>;
|
||||
power-domains = <&CPU_PD4>;
|
||||
power-domain-names = "psci";
|
||||
L2_1: l2-cache {
|
||||
compatible = "cache";
|
||||
cache-level = <2>;
|
||||
@@ -115,6 +125,8 @@
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&L2_1>;
|
||||
qcom,freq-domain = <&cpufreq_hw 1>;
|
||||
power-domains = <&CPU_PD5>;
|
||||
power-domain-names = "psci";
|
||||
};
|
||||
|
||||
CPU6: cpu@102 {
|
||||
@@ -127,6 +139,8 @@
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&L2_1>;
|
||||
qcom,freq-domain = <&cpufreq_hw 1>;
|
||||
power-domains = <&CPU_PD6>;
|
||||
power-domain-names = "psci";
|
||||
};
|
||||
|
||||
CPU7: cpu@103 {
|
||||
@@ -139,6 +153,8 @@
|
||||
enable-method = "psci";
|
||||
next-level-cache = <&L2_1>;
|
||||
qcom,freq-domain = <&cpufreq_hw 1>;
|
||||
power-domains = <&CPU_PD7>;
|
||||
power-domain-names = "psci";
|
||||
};
|
||||
|
||||
cpu-map {
|
||||
@@ -178,6 +194,68 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
idle-states {
|
||||
entry-method = "psci";
|
||||
|
||||
LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
|
||||
compatible = "arm,idle-state";
|
||||
idle-state-name = "silver-rail-power-collapse";
|
||||
arm,psci-suspend-param = <0x40000003>;
|
||||
entry-latency-us = <290>;
|
||||
exit-latency-us = <376>;
|
||||
min-residency-us = <1182>;
|
||||
local-timer-stop;
|
||||
};
|
||||
|
||||
BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
|
||||
compatible = "arm,idle-state";
|
||||
idle-state-name = "gold-rail-power-collapse";
|
||||
arm,psci-suspend-param = <0x40000003>;
|
||||
entry-latency-us = <297>;
|
||||
exit-latency-us = <324>;
|
||||
min-residency-us = <1110>;
|
||||
local-timer-stop;
|
||||
};
|
||||
};
|
||||
|
||||
domain-idle-states {
|
||||
CLUSTER_0_SLEEP_0: cluster-sleep-0-0 {
|
||||
/* GDHS */
|
||||
compatible = "domain-idle-state";
|
||||
arm,psci-suspend-param = <0x40000022>;
|
||||
entry-latency-us = <360>;
|
||||
exit-latency-us = <421>;
|
||||
min-residency-us = <782>;
|
||||
};
|
||||
|
||||
CLUSTER_0_SLEEP_1: cluster-sleep-0-1 {
|
||||
/* Power Collapse */
|
||||
compatible = "domain-idle-state";
|
||||
arm,psci-suspend-param = <0x41000044>;
|
||||
entry-latency-us = <800>;
|
||||
exit-latency-us = <2118>;
|
||||
min-residency-us = <7376>;
|
||||
};
|
||||
|
||||
CLUSTER_1_SLEEP_0: cluster-sleep-1-0 {
|
||||
/* GDHS */
|
||||
compatible = "domain-idle-state";
|
||||
arm,psci-suspend-param = <0x40000042>;
|
||||
entry-latency-us = <314>;
|
||||
exit-latency-us = <345>;
|
||||
min-residency-us = <660>;
|
||||
};
|
||||
|
||||
CLUSTER_1_SLEEP_1: cluster-sleep-1-1 {
|
||||
/* Power Collapse */
|
||||
compatible = "domain-idle-state";
|
||||
arm,psci-suspend-param = <0x41000044>;
|
||||
entry-latency-us = <640>;
|
||||
exit-latency-us = <1654>;
|
||||
min-residency-us = <8094>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
firmware {
|
||||
@@ -201,6 +279,64 @@
|
||||
psci {
|
||||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
|
||||
CPU_PD0: power-domain-cpu0 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_0_PD>;
|
||||
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CPU_PD1: power-domain-cpu1 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_0_PD>;
|
||||
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CPU_PD2: power-domain-cpu2 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_0_PD>;
|
||||
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CPU_PD3: power-domain-cpu3 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_0_PD>;
|
||||
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CPU_PD4: power-domain-cpu4 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_1_PD>;
|
||||
domain-idle-states = <&BIG_CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CPU_PD5: power-domain-cpu5 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_1_PD>;
|
||||
domain-idle-states = <&BIG_CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CPU_PD6: power-domain-cpu6 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_1_PD>;
|
||||
domain-idle-states = <&BIG_CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CPU_PD7: power-domain-cpu7 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_1_PD>;
|
||||
domain-idle-states = <&BIG_CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CLUSTER_0_PD: power-domain-cpu-cluster0 {
|
||||
#power-domain-cells = <0>;
|
||||
domain-idle-states = <&CLUSTER_0_SLEEP_0>, <&CLUSTER_0_SLEEP_1>;
|
||||
};
|
||||
|
||||
CLUSTER_1_PD: power-domain-cpu-cluster1 {
|
||||
#power-domain-cells = <0>;
|
||||
domain-idle-states = <&CLUSTER_1_SLEEP_0>, <&CLUSTER_1_SLEEP_1>;
|
||||
};
|
||||
};
|
||||
|
||||
reserved_memory: reserved-memory {
|
||||
@@ -661,6 +797,62 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
cryptobam: dma-controller@1b04000 {
|
||||
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
|
||||
reg = <0x0 0x01b04000 0x0 0x24000>;
|
||||
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&rpmcc RPM_SMD_CE1_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
#dma-cells = <1>;
|
||||
qcom,ee = <0>;
|
||||
qcom,controlled-remotely;
|
||||
iommus = <&apps_smmu 0x92 0>,
|
||||
<&apps_smmu 0x94 0x11>,
|
||||
<&apps_smmu 0x96 0x11>,
|
||||
<&apps_smmu 0x98 0x1>,
|
||||
<&apps_smmu 0x9F 0>;
|
||||
};
|
||||
|
||||
crypto: crypto@1b3a000 {
|
||||
compatible = "qcom,sm6115-qce", "qcom,ipq4019-qce", "qcom,qce";
|
||||
reg = <0x0 0x01b3a000 0x0 0x6000>;
|
||||
clocks = <&rpmcc RPM_SMD_CE1_CLK>;
|
||||
clock-names = "core";
|
||||
|
||||
dmas = <&cryptobam 6>, <&cryptobam 7>;
|
||||
dma-names = "rx", "tx";
|
||||
iommus = <&apps_smmu 0x92 0>,
|
||||
<&apps_smmu 0x94 0x11>,
|
||||
<&apps_smmu 0x96 0x11>,
|
||||
<&apps_smmu 0x98 0x1>,
|
||||
<&apps_smmu 0x9F 0>;
|
||||
};
|
||||
|
||||
usb_qmpphy: phy@1615000 {
|
||||
compatible = "qcom,sm6115-qmp-usb3-phy";
|
||||
reg = <0x0 0x01615000 0x0 0x1000>;
|
||||
|
||||
clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
|
||||
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
|
||||
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
|
||||
<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
|
||||
clock-names = "cfg_ahb",
|
||||
"ref",
|
||||
"com_aux",
|
||||
"pipe";
|
||||
|
||||
resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
|
||||
<&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
|
||||
reset-names = "phy", "phy_phy";
|
||||
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "usb3_phy_pipe_clk_src";
|
||||
|
||||
#phy-cells = <0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
qfprom@1b40000 {
|
||||
compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
|
||||
reg = <0x0 0x01b40000 0x0 0x7000>;
|
||||
@@ -698,7 +890,7 @@
|
||||
#interrupt-cells = <4>;
|
||||
};
|
||||
|
||||
tsens0: thermal-sensor@4410000 {
|
||||
tsens0: thermal-sensor@4411000 {
|
||||
compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
|
||||
reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */
|
||||
<0x0 0x04410000 0x0 0x8>; /* SROT */
|
||||
@@ -1111,8 +1303,8 @@
|
||||
compatible = "snps,dwc3";
|
||||
reg = <0x0 0x04e00000 0x0 0xcd00>;
|
||||
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usb_hsphy>;
|
||||
phy-names = "usb2-phy";
|
||||
phys = <&usb_hsphy>, <&usb_qmpphy>;
|
||||
phy-names = "usb2-phy", "usb3-phy";
|
||||
iommus = <&apps_smmu 0x120 0x0>;
|
||||
snps,dis_u2_susphy_quirk;
|
||||
snps,dis_enblslpm_quirk;
|
||||
|
||||
@@ -306,6 +306,9 @@
|
||||
&usb_dwc3 {
|
||||
maximum-speed = "high-speed";
|
||||
dr_mode = "peripheral";
|
||||
|
||||
phys = <&usb_hsphy>;
|
||||
phy-names = "usb2-phy";
|
||||
};
|
||||
|
||||
&usb_hsphy {
|
||||
|
||||
@@ -138,7 +138,7 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>;
|
||||
|
||||
adc-chan@4d {
|
||||
channel@4d {
|
||||
reg = <ADC5_AMUX_THM1_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
@@ -146,7 +146,7 @@
|
||||
label = "rf_pa0_therm";
|
||||
};
|
||||
|
||||
adc-chan@4e {
|
||||
channel@4e {
|
||||
reg = <ADC5_AMUX_THM2_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
@@ -154,7 +154,7 @@
|
||||
label = "quiet_therm";
|
||||
};
|
||||
|
||||
adc-chan@52 {
|
||||
channel@52 {
|
||||
reg = <ADC5_GPIO1_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
@@ -162,7 +162,7 @@
|
||||
label = "camera_flash_therm";
|
||||
};
|
||||
|
||||
adc-chan@54 {
|
||||
channel@54 {
|
||||
reg = <ADC5_GPIO3_100K_PU>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
|
||||
@@ -364,7 +364,7 @@
|
||||
hwlocks = <&tcsr_mutex 3>;
|
||||
};
|
||||
|
||||
soc {
|
||||
soc@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x00 0x00 0x00 0xffffffff>;
|
||||
|
||||
@@ -1891,28 +1891,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
wifi: wifi@18800000 {
|
||||
compatible = "qcom,wcn3990-wifi";
|
||||
reg = <0 0x18800000 0 0x800000>;
|
||||
reg-names = "membase";
|
||||
memory-region = <&wlan_fw_mem>;
|
||||
interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
|
||||
iommus = <&apps_smmu 0x20 0x1>;
|
||||
qcom,msa-fixed-perm;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apps_rsc: rsc@18200000 {
|
||||
compatible = "qcom,rpmh-rsc";
|
||||
label = "apps_rsc";
|
||||
@@ -2010,6 +1988,28 @@
|
||||
#freq-domain-cells = <1>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
wifi: wifi@18800000 {
|
||||
compatible = "qcom,wcn3990-wifi";
|
||||
reg = <0 0x18800000 0 0x800000>;
|
||||
reg-names = "membase";
|
||||
memory-region = <&wlan_fw_mem>;
|
||||
interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
|
||||
iommus = <&apps_smmu 0x20 0x1>;
|
||||
qcom,msa-fixed-perm;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
timer {
|
||||
|
||||
@@ -6,6 +6,7 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include "sm8150.dtsi"
|
||||
#include "pm8150.dtsi"
|
||||
@@ -81,6 +82,66 @@
|
||||
};
|
||||
};
|
||||
|
||||
cam0_vdig_vreg: cam0-vdig-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "camera0_vdig_vreg";
|
||||
gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&main_cam_pwr_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
cam1_vdig_vreg: cam1-vdig-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "camera1_vdig_vreg";
|
||||
gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&sub_cam_pwr_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
cam2_vdig_vreg: cam2-vdig-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "camera2_vdig_vreg";
|
||||
gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&chat_cam_pwr_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
cam3_vdig_vreg: cam3-vdig-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "camera3_vdig_vreg";
|
||||
gpio = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&supwc_pwr_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
cam_vmdr_vreg: cam-vmdr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "camera_vmdr_vreg";
|
||||
gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&main_cam_pwr_vmdr_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
rgbcir_vreg: rgbcir-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "rgbcir_vreg";
|
||||
gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-0 = <&rgbc_ir_pwr_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
@@ -456,6 +517,17 @@
|
||||
};
|
||||
|
||||
&pm8150_gpios {
|
||||
gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
|
||||
"",
|
||||
"NC",
|
||||
"NC",
|
||||
"",
|
||||
"NC",
|
||||
"SUPWC_PWR_EN",
|
||||
"",
|
||||
"NC",
|
||||
"NC"; /* GPIO_10 */
|
||||
|
||||
vol_down_n: vol-down-n-state {
|
||||
pins = "gpio1";
|
||||
function = "normal";
|
||||
@@ -463,9 +535,31 @@
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
};
|
||||
|
||||
supwc_pwr_en: supwc-pwr-en-state {
|
||||
pins = "gpio7";
|
||||
function = "normal";
|
||||
qcom,drive-strength = <1>;
|
||||
power-source = <1>;
|
||||
drive-push-pull;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8150b_gpios {
|
||||
gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
|
||||
"FOCUS_N",
|
||||
"NC",
|
||||
"NC",
|
||||
"RF_LCD_ID_EN",
|
||||
"NC",
|
||||
"TS_VDDH_EN",
|
||||
"LCD_ID",
|
||||
"",
|
||||
"NC", /* GPIO_10 */
|
||||
"NC",
|
||||
"RF_ID";
|
||||
|
||||
snapshot_n: snapshot-n-state {
|
||||
pins = "gpio1";
|
||||
function = "normal";
|
||||
@@ -483,6 +577,30 @@
|
||||
};
|
||||
};
|
||||
|
||||
&pm8150l_gpios {
|
||||
gpio-line-names = "TS_VDDIO_EN", /* GPIO_1 */
|
||||
"NC",
|
||||
"MAIN_CAM_PWR_VMDR_EN",
|
||||
"NC",
|
||||
"",
|
||||
"NC",
|
||||
"NC",
|
||||
"FP_LDO_EN",
|
||||
"NC",
|
||||
"NC", /* GPIO_10 */
|
||||
"NC",
|
||||
"NC";
|
||||
|
||||
main_cam_pwr_vmdr_en: main-cam-pwr-vmdr-en-state {
|
||||
pins = "gpio3";
|
||||
function = "normal";
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
|
||||
power-source = <0>;
|
||||
drive-push-pull;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
&pon_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -500,8 +618,225 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
vmmc-supply = <&vreg_l9c_2p9>;
|
||||
vqmmc-supply = <&vreg_l6c_2p9>;
|
||||
cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
|
||||
bus-width = <4>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <126 4>;
|
||||
gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */
|
||||
"NFC_ESE_SPI_MOSI",
|
||||
"NFC_ESE_SPI_SCLK",
|
||||
"NFC_ESE_SPI_CS_N",
|
||||
"NC",
|
||||
"NC",
|
||||
"DISP_RESET_N",
|
||||
"DEBUG_GPIO0",
|
||||
"MDP_VSYNC_P",
|
||||
"TS_I2C_SDA",
|
||||
"TS_I2C_SCL", /* GPIO_10 */
|
||||
"CAM_SOF",
|
||||
"CAM2_RST_N",
|
||||
"CAM_MCLK0",
|
||||
"CAM_MCLK1",
|
||||
"CAM_MCLK2",
|
||||
"CAM_MCLK3",
|
||||
"CCI_I2C_SDA0",
|
||||
"CCI_I2C_SCL0",
|
||||
"CCI_I2C_SDA1",
|
||||
"CCI_I2C_SCL1", /* GPIO_20 */
|
||||
"NC",
|
||||
"MAIN_CAM_PWR_EN",
|
||||
"CAM3_RST_N",
|
||||
"NC",
|
||||
"CHAT_CAM_PWR_EN",
|
||||
"NC",
|
||||
"NC",
|
||||
"CAM0_RST_N",
|
||||
"RGBC_IR_PWR_EN",
|
||||
"CAM1_RST_N", /* GPIO_30 */
|
||||
"CCI_I2C_SDA2",
|
||||
"CCI_I2C_SCL2",
|
||||
"CCI_I2C_SDA3",
|
||||
"CCI_I2C_SCL3",
|
||||
"NC",
|
||||
"DEBUG_GPIO1",
|
||||
"RGBC_IR_INT",
|
||||
"USB_CC_DIR",
|
||||
"NC",
|
||||
"NC", /* GPIO_40 */
|
||||
"NFC_EN",
|
||||
"NFC_ESE_PWR_REQ",
|
||||
"BT_HCI_UART_CTS_N",
|
||||
"BT_HCI_UART_RFR_N",
|
||||
"BT_HCI_UART_TXD",
|
||||
"BT_HCI_UART_RXD",
|
||||
"NFC_IRQ",
|
||||
"NFC_DWL_REQ",
|
||||
"UIM2_DETECT_EN",
|
||||
"WLAN_SW_CTRL", /* GPIO_50 */
|
||||
"APPS_I2C_SDA",
|
||||
"APPS_I2C_SCL",
|
||||
"NC",
|
||||
"TS_RESET_N",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"HW_ID_0",
|
||||
"NC", /* GPIO_60 */
|
||||
"QLINK_REQUEST",
|
||||
"QLINK_ENABLE",
|
||||
"WMSS_RESET_N",
|
||||
"SDM_GRFC_8",
|
||||
"WDOG_DISABLE",
|
||||
"NC",
|
||||
"NC",
|
||||
"PA_INDICATOR_OR",
|
||||
"MSS_LTE_COXM_TXD",
|
||||
"MSS_LTE_COXM_RXD", /* GPIO_70 */
|
||||
"SDM_RFFE0_DATA",
|
||||
"SDM_RFFE0_CLK",
|
||||
"SDM_RFFE1_DATA",
|
||||
"SDM_RFFE1_CLK",
|
||||
"SDM_RFFE2_DATA",
|
||||
"SDM_RFFE2_CLK",
|
||||
"SDM_RFFE3_DATA",
|
||||
"SDM_RFFE3_CLK",
|
||||
"SUB_CAM_PWR_EN",
|
||||
"FP_RESET_N", /* GPIO_80 */
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"DEBUG_UART_TX",
|
||||
"DEBUG_UART_RX",
|
||||
"DVDT_WRT_DET_AND",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC", /* GPIO_90 */
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"UDON_SWITCH_SEL",
|
||||
"SD_CARD_DET_N",
|
||||
"NC",
|
||||
"CAMSENSOR_I2C_SDA",
|
||||
"CAMSENSOR_I2C_SCL",
|
||||
"USB_AUDIO_EN1", /* GPIO_100 */
|
||||
"DISP_ERR_FG",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"UIM2_DATA",
|
||||
"UIM2_CLK",
|
||||
"UIM2_RESET",
|
||||
"UIM2_DET",
|
||||
"UIM1_DATA",
|
||||
"UIM1_CLK", /* GPIO_110 */
|
||||
"UIM1_RESET",
|
||||
"UIM1_PRESENT",
|
||||
"NFC_CLK_REQ",
|
||||
"SW_SERVICE",
|
||||
"NC",
|
||||
"RF_ID_EXTENSION",
|
||||
"ALS_PROX_INT_N",
|
||||
"FP_INT",
|
||||
"DVDT_WRT_DET_OR",
|
||||
"BAROMETER_INT", /* GPIO_120 */
|
||||
"ACC_COVER_OPEN",
|
||||
"TS_INT_N",
|
||||
"CODEC_INT1_N",
|
||||
"CODEC_INT2_N",
|
||||
"TX_GTR_THRES_IN",
|
||||
"FP_SPI_MISO",
|
||||
"FP_SPI_MOSI",
|
||||
"FP_SPI_SCLK",
|
||||
"FP_SPI_CS_N",
|
||||
"NC", /* GPIO_130 */
|
||||
"DVDT_ENABLE",
|
||||
"ACCEL_INT",
|
||||
"NC",
|
||||
"MAG_INT_N",
|
||||
"NC",
|
||||
"FORCED_USB_BOOT",
|
||||
"NC",
|
||||
"NC",
|
||||
"HW_ID_1",
|
||||
"NC", /* GPIO_140 */
|
||||
"NC",
|
||||
"NC",
|
||||
"CODEC_RST_N",
|
||||
"CDC_SPI_MISO",
|
||||
"CDC_SPI_MOSI",
|
||||
"CDC_SPI_SCLK",
|
||||
"CDC_SPI_CS_N",
|
||||
"NC",
|
||||
"LPASS_SLIMBUS_CLK",
|
||||
"LPASS_SLIMBUS_DATA0", /* GPIO_150 */
|
||||
"LPASS_SLIMBUS_DATA1",
|
||||
"USB_AUDIO_EN2",
|
||||
"BT_FM_SLIMBUS_DATA",
|
||||
"BT_FM_SLIMBUS_CLK",
|
||||
"COMPASS_I2C_SDA",
|
||||
"COMPASS_I2C_SCL",
|
||||
"SSC_SPI_1_MISO",
|
||||
"SSC_SPI_1_MOSI",
|
||||
"SSC_SPI_1_CLK",
|
||||
"SSC_SPI_1_CS_N", /* GPIO_160 */
|
||||
"SSC_SENSOR_I2C_SDA",
|
||||
"SSC_SENSOR_I2C_SCL",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"SSC_UART_1_TX",
|
||||
"SSC_UART_1_RX",
|
||||
"WL_CMD_CLK_CHAIN0",
|
||||
"WL_CMD_DATA_CHAIN0", /* GPIO_170 */
|
||||
"WL_CMD_CLK_CHAIN1",
|
||||
"WL_CMD_DATA_CHAIN1",
|
||||
"WL_BT_COEX_CLK",
|
||||
"WL_BT_COEX_DATA";
|
||||
|
||||
main_cam_pwr_en: main-cam-pwr-en-state {
|
||||
pins = "gpio22";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
|
||||
chat_cam_pwr_en: chat-cam-pwr-en-state {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
|
||||
rgbc_ir_pwr_en: rgbc-ir-pwr-en-state {
|
||||
pins = "gpio29";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
|
||||
sub_cam_pwr_en: sub-cam-pwr-en-state {
|
||||
pins = "gpio79";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
|
||||
@@ -1353,14 +1353,11 @@
|
||||
uart9: serial@a84000 {
|
||||
compatible = "qcom,geni-uart";
|
||||
reg = <0x0 0x00a84000 0x0 0x4000>;
|
||||
reg-names = "se";
|
||||
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
|
||||
clock-names = "se";
|
||||
pinctrl-0 = <&qup_uart9_default>;
|
||||
pinctrl-names = "default";
|
||||
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@@ -1817,7 +1814,7 @@
|
||||
};
|
||||
|
||||
pcie0: pci@1c00000 {
|
||||
compatible = "qcom,pcie-sm8150", "snps,dw-pcie";
|
||||
compatible = "qcom,pcie-sm8150";
|
||||
reg = <0 0x01c00000 0 0x3000>,
|
||||
<0 0x60000000 0 0xf1d>,
|
||||
<0 0x60000f20 0 0xa8>,
|
||||
@@ -1912,7 +1909,7 @@
|
||||
};
|
||||
|
||||
pcie1: pci@1c08000 {
|
||||
compatible = "qcom,pcie-sm8150", "snps,dw-pcie";
|
||||
compatible = "qcom,pcie-sm8150";
|
||||
reg = <0 0x01c08000 0 0x3000>,
|
||||
<0 0x40000000 0 0xf1d>,
|
||||
<0 0x40000f20 0 0xa8>,
|
||||
@@ -2088,6 +2085,36 @@
|
||||
};
|
||||
};
|
||||
|
||||
cryptobam: dma-controller@1dc4000 {
|
||||
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
|
||||
reg = <0 0x01dc4000 0 0x24000>;
|
||||
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
qcom,ee = <0>;
|
||||
qcom,controlled-remotely;
|
||||
num-channels = <8>;
|
||||
qcom,num-ees = <2>;
|
||||
iommus = <&apps_smmu 0x502 0x0641>,
|
||||
<&apps_smmu 0x504 0x0011>,
|
||||
<&apps_smmu 0x506 0x0011>,
|
||||
<&apps_smmu 0x508 0x0011>,
|
||||
<&apps_smmu 0x512 0x0000>;
|
||||
};
|
||||
|
||||
crypto: crypto@1dfa000 {
|
||||
compatible = "qcom,sm8150-qce", "qcom,qce";
|
||||
reg = <0 0x01dfa000 0 0x6000>;
|
||||
dmas = <&cryptobam 4>, <&cryptobam 5>;
|
||||
dma-names = "rx", "tx";
|
||||
iommus = <&apps_smmu 0x502 0x0641>,
|
||||
<&apps_smmu 0x504 0x0011>,
|
||||
<&apps_smmu 0x506 0x0011>,
|
||||
<&apps_smmu 0x508 0x0011>,
|
||||
<&apps_smmu 0x512 0x0000>;
|
||||
interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 &mc_virt SLAVE_EBI_CH0>;
|
||||
interconnect-names = "memory";
|
||||
};
|
||||
|
||||
tcsr_mutex: hwlock@1f40000 {
|
||||
compatible = "qcom,tcsr-mutex";
|
||||
reg = <0x0 0x01f40000 0x0 0x20000>;
|
||||
@@ -3977,7 +4004,7 @@
|
||||
};
|
||||
|
||||
apps_smmu: iommu@15000000 {
|
||||
compatible = "qcom,sm8150-smmu-500", "arm,mmu-500";
|
||||
compatible = "qcom,sm8150-smmu-500", "qcom,smmu-500", "arm,mmu-500";
|
||||
reg = <0 0x15000000 0 0x100000>;
|
||||
#iommu-cells = <2>;
|
||||
#global-interrupts = <1>;
|
||||
|
||||
@@ -672,3 +672,8 @@
|
||||
vdda-phy-supply = <&vreg_l9a_1p2>;
|
||||
vdda-pll-supply = <&vreg_l18a_0p9>;
|
||||
};
|
||||
|
||||
&venus {
|
||||
firmware-name = "qcom/sm8250/Sony/edo/venus.mbn";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -504,7 +504,6 @@
|
||||
remote-endpoint = <&dsi1_out>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user