mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-07 11:26:02 +09:00
power: supply: add CellWise cw221x fuel gauge driver
Signed-off-by: shengfei Xu <xsf@rock-chips.com> Change-Id: I0e29139f2c28b145f650af6d29006a71c84fd624
This commit is contained in:
shengfei Xu
27
Documentation/devicetree/bindings/power/cw221x_battery.txt
Normal file
27
Documentation/devicetree/bindings/power/cw221x_battery.txt
Normal file
@@ -0,0 +1,27 @@
|
||||
Binding for CW221X Battery
|
||||
|
||||
Required properties:
|
||||
- compatible: Should contain one of the following:
|
||||
* "cw221x"
|
||||
- reg: integer, smbus address of the device.
|
||||
|
||||
- cellwise,battery-profile: battery curve information;
|
||||
|
||||
|
||||
Optional properties:
|
||||
|
||||
Example:
|
||||
cw221x@64 {
|
||||
status = "okay";
|
||||
compatible = "cellwise,cw221X";
|
||||
reg = <0x64>;
|
||||
cellwise,battery-profile = /bits/ 8
|
||||
<0x15 0xA8 0x5D 0x5D 0x59 0x55 0x57 0x50
|
||||
0x4B 0x4F 0x55 0x53 0x43 0x37 0x2F 0x28
|
||||
0x21 0x18 0x15 0x17 0x27 0x43 0x57 0x4F
|
||||
0x13 0x5E 0x0A 0xE1 0x19 0x31 0x3C 0x46
|
||||
0x4C 0x52 0x50 0x54 0x44 0x1E 0x7E 0x4C
|
||||
0x1C 0x4A 0x52 0x87 0x8F 0x91 0x94 0x52
|
||||
0x82 0x8C 0x92 0x96 0x00 0xAD 0xFB 0xCB
|
||||
0x2F 0x7D 0x72 0xA5 0xB5 0xC1 0x1C 0x09>;
|
||||
};
|
||||
@@ -138,6 +138,16 @@ config BATTERY_CW2017
|
||||
This driver can also be built as a module. If so, the module will be
|
||||
called cw2017_battery.
|
||||
|
||||
config BATTERY_CW221X
|
||||
tristate "CW221x Battery driver"
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
help
|
||||
Say Y hereto enable support for the cellwise cw221x
|
||||
battery fuel gauge (used in the Pinebook Pro & others)
|
||||
This driver can also be built as a module. If so, the module will be
|
||||
called cw221x_battery.
|
||||
|
||||
config BATTERY_DS2760
|
||||
tristate "DS2760 battery driver (HP iPAQ & others)"
|
||||
depends on W1
|
||||
|
||||
@@ -26,6 +26,7 @@ obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o
|
||||
obj-$(CONFIG_BATTERY_CPCAP) += cpcap-battery.o
|
||||
obj-$(CONFIG_BATTERY_CW2015) += cw2015_battery.o
|
||||
obj-$(CONFIG_BATTERY_CW2017) += cw2017_battery.o
|
||||
obj-$(CONFIG_BATTERY_CW221X) += cw221x_battery.o
|
||||
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
|
||||
obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
|
||||
obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
|
||||
|
||||
908
drivers/power/supply/cw221x_battery.c
Normal file
908
drivers/power/supply/cw221x_battery.c
Normal file
@@ -0,0 +1,908 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Chrager driver for cw221x
|
||||
*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
* Author: Xu Shengfei <xsf@rock-chips.com>
|
||||
*/
|
||||
#include <linux/delay.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/power_supply.h>
|
||||
#include <linux/sizes.h>
|
||||
#include <linux/time.h>
|
||||
#include <linux/workqueue.h>
|
||||
|
||||
/* Module parameters. */
|
||||
static int debug;
|
||||
module_param_named(debug, debug, int, 0644);
|
||||
MODULE_PARM_DESC(debug, "Set to one to enable debugging messages.");
|
||||
|
||||
#define cw_printk(fmt, arg...) \
|
||||
{ \
|
||||
if (debug) \
|
||||
pr_info("FG_CW221X: %s-%d:" fmt, __func__, __LINE__, ##arg); \
|
||||
}
|
||||
|
||||
#define CW_PROPERTIES "cw221X-bat"
|
||||
|
||||
#define REG_CHIP_ID 0x00
|
||||
#define REG_VCELL_H 0x02
|
||||
#define REG_VCELL_L 0x03
|
||||
#define REG_SOC_INT 0x04
|
||||
#define REG_SOC_DECIMAL 0x05
|
||||
#define REG_TEMP 0x06
|
||||
#define REG_MODE_CONFIG 0x08
|
||||
#define REG_GPIO_CONFIG 0x0A
|
||||
#define REG_SOC_ALERT 0x0B
|
||||
#define REG_TEMP_MAX 0x0C
|
||||
#define REG_TEMP_MIN 0x0D
|
||||
#define REG_CURRENT_H 0x0E
|
||||
#define REG_CURRENT_L 0x0F
|
||||
#define REG_T_HOST_H 0xA0
|
||||
#define REG_T_HOST_L 0xA1
|
||||
#define REG_USER_CONF 0xA2
|
||||
#define REG_CYCLE_H 0xA4
|
||||
#define REG_CYCLE_L 0xA5
|
||||
#define REG_SOH 0xA6
|
||||
#define REG_IC_STATE 0xA7
|
||||
#define REG_FW_VERSION 0xAB
|
||||
#define REG_BAT_PROFILE 0x10
|
||||
|
||||
#define CONFIG_MODE_RESTART 0x30
|
||||
#define CONFIG_MODE_ACTIVE 0x00
|
||||
#define CONFIG_MODE_SLEEP 0xF0
|
||||
#define CONFIG_UPDATE_FLG 0x80
|
||||
#define IC_VCHIP_ID 0xA0
|
||||
#define IC_READY_MARK 0x0C
|
||||
|
||||
#define GPIO_ENABLE_MIN_TEMP 0
|
||||
#define GPIO_ENABLE_MAX_TEMP 0
|
||||
#define GPIO_ENABLE_SOC_CHANGE 0
|
||||
#define GPIO_SOC_IRQ_VALUE 0x0 /* 0x7F */
|
||||
#define DEFINED_MAX_TEMP 45
|
||||
#define DEFINED_MIN_TEMP 0
|
||||
|
||||
#define CWFG_NAME "cw221X"
|
||||
#define SIZE_OF_PROFILE 80
|
||||
|
||||
/* mhom rsense * 1000 for convenience calculation */
|
||||
#define USER_RSENSE 1000
|
||||
|
||||
#define queue_delayed_work_time 1000
|
||||
#define queue_start_work_time 50
|
||||
|
||||
#define CW_SLEEP_20MS 20
|
||||
#define CW_SLEEP_10MS 10
|
||||
#define CW_UI_FULL 100
|
||||
#define COMPLEMENT_CODE_U16 0x8000
|
||||
#define CW_SLEEP_100MS 100
|
||||
#define CW_SLEEP_200MS 200
|
||||
#define CW_SLEEP_COUNTS 50
|
||||
#define CW_TRUE 1
|
||||
#define CW_RETRY_COUNT 3
|
||||
#define CW_VOL_UNIT 1000
|
||||
#define CW_LOW_VOLTAGE_REF 2500
|
||||
#define CW_LOW_VOLTAGE 3000
|
||||
#define CW_LOW_VOLTAGE_STEP 10
|
||||
|
||||
#define CW221X_NOT_ACTIVE 1
|
||||
#define CW221X_PROFILE_NOT_READY 2
|
||||
#define CW221X_PROFILE_NEED_UPDATE 3
|
||||
|
||||
#define CW2215_MARK 0x80
|
||||
#define CW2217_MARK 0x40
|
||||
#define CW2218_MARK 0x00
|
||||
|
||||
static unsigned char config_profile_info[SIZE_OF_PROFILE] = {
|
||||
0x32, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC1, 0xCC,
|
||||
0xC7, 0xC5, 0xBE, 0xA6, 0xA7, 0x9A, 0x36, 0x9D, 0x91, 0x85,
|
||||
0x7E, 0x5C, 0x54, 0x4D, 0x49, 0x43, 0x3C, 0x36, 0x8C, 0xD2,
|
||||
0x6E, 0xE7, 0xCE, 0x8B, 0x67, 0x89, 0xC1, 0xD2, 0xCD, 0xC6,
|
||||
0xB1, 0xC3, 0xB9, 0xBE, 0xC3, 0xC2, 0xC0, 0xC6, 0xCD, 0xC1,
|
||||
0xCC, 0xE4, 0xDD, 0xF4, 0xFF, 0x71, 0x80, 0x00, 0xAB, 0x10,
|
||||
0x00, 0x90, 0xA0, 0x00, 0x00, 0x00, 0x64, 0x13, 0xB3, 0xC2,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x91,
|
||||
};
|
||||
|
||||
struct cw_battery {
|
||||
struct i2c_client *client;
|
||||
struct device *dev;
|
||||
struct workqueue_struct *cwfg_workqueue;
|
||||
struct delayed_work battery_delay_work;
|
||||
|
||||
struct power_supply *cw_bat;
|
||||
u8 *bat_profile;
|
||||
int chip_id;
|
||||
int voltage;
|
||||
int ic_soc_h;
|
||||
int ic_soc_l;
|
||||
int ui_soc;
|
||||
int temp;
|
||||
long cw_current;
|
||||
int cycle;
|
||||
int soh;
|
||||
int fw_version;
|
||||
};
|
||||
|
||||
/* CW221X iic read function */
|
||||
static int cw_read(struct i2c_client *client,
|
||||
unsigned char reg,
|
||||
unsigned char buf[])
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_read_i2c_block_data(client, reg, 1, buf);
|
||||
if (ret < 0)
|
||||
dev_err(&client->dev, "IIC error %d\n", ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* CW221X iic write function */
|
||||
static int cw_write(struct i2c_client *client,
|
||||
unsigned char reg,
|
||||
unsigned char const buf[])
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_write_i2c_block_data(client, reg, 1, &buf[0]);
|
||||
if (ret < 0)
|
||||
dev_err(&client->dev, "IIC error %d\n", ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* CW221X iic read word function */
|
||||
static int cw_read_word(struct i2c_client *client,
|
||||
unsigned char reg,
|
||||
unsigned char buf[])
|
||||
{
|
||||
unsigned char reg_val[2] = {0, 0};
|
||||
unsigned int temp_val_buff;
|
||||
unsigned int temp_val_second;
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_read_i2c_block_data(client, reg, 2, reg_val);
|
||||
if (ret < 0)
|
||||
dev_err(&client->dev, "IIC error %d\n", ret);
|
||||
temp_val_buff = (reg_val[0] << 8) + reg_val[1];
|
||||
|
||||
msleep(CW_SLEEP_10MS);
|
||||
ret = i2c_smbus_read_i2c_block_data(client, reg, 2, reg_val);
|
||||
if (ret < 0)
|
||||
dev_err(&client->dev, "IIC error %d\n", ret);
|
||||
temp_val_second = (reg_val[0] << 8) + reg_val[1];
|
||||
|
||||
if (temp_val_buff != temp_val_second) {
|
||||
msleep(CW_SLEEP_10MS);
|
||||
ret = i2c_smbus_read_i2c_block_data(client, reg, 2, reg_val);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "IIC error %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
buf[0] = reg_val[0];
|
||||
buf[1] = reg_val[1];
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* CW221X iic write profile function */
|
||||
static int cw_write_profile(struct i2c_client *client, unsigned char const buf[])
|
||||
{
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < SIZE_OF_PROFILE; i++) {
|
||||
ret = cw_write(client, REG_BAT_PROFILE + i, &buf[i]);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "IIC error %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* CW221X Active function
|
||||
* The CONFIG register is used for the host MCU to configure the fuel gauge IC.
|
||||
* The default value is 0xF0, SLEEP and RESTART bits are set. To power up the IC,
|
||||
* the host MCU needs to write 0x30 to exit shutdown mode, and then write 0x00 to
|
||||
* restart the gauge to enter active mode. To reset the IC, the host MCU needs
|
||||
* to write 0xF0, 0x30 and 0x00 in sequence to this register to complete the
|
||||
* restart procedure. The CW221X will reload relevant parameters and settings and
|
||||
* restart SOC calculation. Note that the SOC may be a different value after reset
|
||||
* operation since it is a brand-new calculation based on the latest battery status.
|
||||
* CONFIG [3:0] is reserved. Don't do any operation with it.
|
||||
*/
|
||||
static int cw221X_active(struct cw_battery *cw_bat)
|
||||
{
|
||||
unsigned char reg_val = CONFIG_MODE_RESTART;
|
||||
int ret;
|
||||
|
||||
ret = cw_write(cw_bat->client, REG_MODE_CONFIG, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
msleep(CW_SLEEP_20MS); /* Here delay must >= 20 ms */
|
||||
|
||||
reg_val = CONFIG_MODE_ACTIVE;
|
||||
ret = cw_write(cw_bat->client, REG_MODE_CONFIG, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
msleep(CW_SLEEP_10MS);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* CW221X Sleep function
|
||||
* The CONFIG register is used for the host MCU to configure the fuel gauge IC.
|
||||
* The default value is 0xF0,SLEEP and RESTART bits are set. To power up the IC,
|
||||
* the host MCU needs to write 0x30 to exit shutdown mode, and then write 0x00
|
||||
* to restart the gauge to enter active mode. To reset the IC, the host MCU needs
|
||||
* to write 0xF0, 0x30 and 0x00 in sequence to this register to complete the restart
|
||||
* procedure. The CW221X will reload relevant parameters and settings and restart SOC
|
||||
* calculation. Note that the SOC may be a different value after reset operation since
|
||||
* it is a brand-new calculation based on the latest battery status.
|
||||
* CONFIG [3:0] is reserved. Don't do any operation with it.
|
||||
*/
|
||||
static int cw221X_sleep(struct cw_battery *cw_bat)
|
||||
{
|
||||
unsigned char reg_val = CONFIG_MODE_RESTART;
|
||||
int ret;
|
||||
|
||||
ret = cw_write(cw_bat->client, REG_MODE_CONFIG, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
msleep(CW_SLEEP_20MS); /* Here delay must >= 20 ms */
|
||||
|
||||
reg_val = CONFIG_MODE_SLEEP;
|
||||
ret = cw_write(cw_bat->client, REG_MODE_CONFIG, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
msleep(CW_SLEEP_10MS);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* The 0x00 register is an UNSIGNED 8bit read-only register. Its value is
|
||||
* fixed to 0xA0 in shutdown mode and active mode.
|
||||
*/
|
||||
static int cw_get_chip_id(struct cw_battery *cw_bat)
|
||||
{
|
||||
unsigned char reg_val;
|
||||
int chip_id;
|
||||
int ret;
|
||||
|
||||
ret = cw_read(cw_bat->client, REG_CHIP_ID, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
chip_id = reg_val; /* This value must be 0xA0! */
|
||||
pr_info("CW: chip_id = 0x%x\n", chip_id);
|
||||
cw_bat->chip_id = chip_id;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* The VCELL register(0x02 0x03) is an UNSIGNED 14bit read-only register that
|
||||
* updates the battery voltage continuously. Battery voltage is measured between
|
||||
* the VCELL pin and VSS pin, which is the ground reference. A 14bit
|
||||
* sigma-delta A/D converter is used and the voltage resolution is 312.5uV. (0.3125mV is *5/16)
|
||||
*/
|
||||
static int cw_get_voltage(struct cw_battery *cw_bat)
|
||||
{
|
||||
unsigned char reg_val[2] = {0, 0};
|
||||
unsigned int voltage;
|
||||
int ret;
|
||||
|
||||
ret = cw_read_word(cw_bat->client, REG_VCELL_H, reg_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
voltage = (reg_val[0] << 8) + reg_val[1];
|
||||
voltage = voltage * 5 / 16;
|
||||
cw_bat->voltage = voltage;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* The SOC register(0x04 0x05) is an UNSIGNED 16bit read-only register that indicates
|
||||
* the SOC of the battery. The SOC shows in % format, which means how much percent of
|
||||
* the battery's total available capacity is remaining in the battery now. The SOC can
|
||||
* intrinsically adjust itself to cater to the change of battery status,
|
||||
* including load, temperature and aging etc.
|
||||
* The high byte(0x04) contains the SOC in 1% unit which can be directly used if
|
||||
* this resolution is good enough for the application. The low byte(0x05) provides
|
||||
* more accurate fractional part of the SOC and its
|
||||
* LSB is (1/256) %.
|
||||
*/
|
||||
static int cw_get_capacity(struct cw_battery *cw_bat)
|
||||
{
|
||||
unsigned char reg_val[2] = {0, 0};
|
||||
int ui_100 = CW_UI_FULL;
|
||||
int ui_soc;
|
||||
int soc_h;
|
||||
int soc_l;
|
||||
int ret;
|
||||
|
||||
ret = cw_read_word(cw_bat->client, REG_SOC_INT, reg_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
soc_h = reg_val[0];
|
||||
soc_l = reg_val[1];
|
||||
ui_soc = ((soc_h * 256 + soc_l) * 100) / (ui_100 * 256);
|
||||
/* remainder = (((soc_h * 256 + soc_l) * 100 * 100) / (ui_100 * 256)) % 100; */
|
||||
if (ui_soc >= 100) {
|
||||
cw_printk("CW221x[%d]: UI_SOC = %d larger 100!\n", __LINE__, ui_soc);
|
||||
ui_soc = 100;
|
||||
}
|
||||
cw_bat->ic_soc_h = soc_h;
|
||||
cw_bat->ic_soc_l = soc_l;
|
||||
cw_bat->ui_soc = ui_soc;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* The TEMP register is an UNSIGNED 8bit read only register.
|
||||
* It reports the real-time battery temperature
|
||||
* measured at TS pin. The scope is from -40 to 87.5 degrees Celsius,
|
||||
* LSB is 0.5 degree Celsius. TEMP(C) = - 40 + Value(0x06 Reg) / 2
|
||||
*/
|
||||
static int cw_get_temp(struct cw_battery *cw_bat)
|
||||
{
|
||||
unsigned char reg_val;
|
||||
int temp;
|
||||
int ret;
|
||||
|
||||
ret = cw_read(cw_bat->client, REG_TEMP, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
temp = (int)reg_val * 10 / 2 - 400;
|
||||
cw_bat->temp = temp;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* get complement code function, unsigned short must be U16 */
|
||||
static long get_complement_code(unsigned short raw_code)
|
||||
{
|
||||
long complement_code;
|
||||
int dir;
|
||||
|
||||
if (0 != (raw_code & COMPLEMENT_CODE_U16)) {
|
||||
dir = -1;
|
||||
raw_code = (0xFFFF - raw_code) + 1;
|
||||
} else {
|
||||
dir = 1;
|
||||
}
|
||||
complement_code = (long)raw_code * dir;
|
||||
|
||||
return complement_code;
|
||||
}
|
||||
|
||||
/*
|
||||
* CURRENT is a SIGNED 16bit register(0x0E 0x0F) that reports current A/D converter
|
||||
* result of the voltage across the current sense resistor, 10mohm typical.
|
||||
* The result is stored as a two's complement value to show positive and negative current.
|
||||
* Voltages outside the minimum and maximum register values are reported as the
|
||||
* minimum or maximum value. The register value should be divided by the sense
|
||||
* resistance to convert to amperes. The value of the sense resistor determines
|
||||
* the resolution and the full-scale range of the current readings. The LSB of 0x0F
|
||||
* is (52.4/32768)uV for CW2215 and CW2217. The LSB of 0x0F is (125/32768)uV for CW2218.
|
||||
* The default value is 0x0000, stands for 0mA. 0x7FFF stands for the maximum charging
|
||||
* current and 0x8001 stands for the maximum discharging current.
|
||||
*/
|
||||
static int cw_get_current(struct cw_battery *cw_bat)
|
||||
{
|
||||
unsigned char reg_val[2] = {0, 0};
|
||||
unsigned short current_reg; /* unsigned short must u16 */
|
||||
long long cw_current; /* use long long type to guarantee 8 bytes space */
|
||||
int ret;
|
||||
|
||||
ret = cw_read_word(cw_bat->client, REG_CURRENT_H, reg_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
current_reg = (reg_val[0] << 8) + reg_val[1];
|
||||
cw_current = get_complement_code(current_reg);
|
||||
|
||||
if (((cw_bat->fw_version & CW2215_MARK) != 0) || ((cw_bat->fw_version & CW2217_MARK) != 0))
|
||||
cw_current = cw_current * 1600 / USER_RSENSE;
|
||||
else if ((cw_bat->fw_version != 0) && ((cw_bat->fw_version & 0xC0) == CW2218_MARK))
|
||||
cw_current = cw_current * 3815 / USER_RSENSE;
|
||||
else {
|
||||
cw_bat->cw_current = 0;
|
||||
dev_err(cw_bat->dev, "error! cw221x firmware read error!\n");
|
||||
}
|
||||
|
||||
cw_bat->cw_current = cw_current;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* CYCLECNT is an UNSIGNED 16bit register(0xA4 0xA5) that counts cycle life of the battery.
|
||||
* The LSB of 0xA5 stands for 1/16 cycle. This register will be clear after enters shutdown mode
|
||||
*/
|
||||
static int cw_get_cycle_count(struct cw_battery *cw_bat)
|
||||
{
|
||||
unsigned char reg_val[2] = {0, 0};
|
||||
int cycle;
|
||||
int ret;
|
||||
|
||||
ret = cw_read_word(cw_bat->client, REG_CYCLE_H, reg_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
cycle = (reg_val[0] << 8) + reg_val[1];
|
||||
cw_bat->cycle = cycle / 16;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* SOH (State of Health) is an UNSIGNED 8bit register(0xA6) that represents the level of
|
||||
* battery aging by tracking battery internal impedance increment. When the device enters
|
||||
* active mode, this register refresh to 0x64 by default. Its range is 0x00 to 0x64,
|
||||
* indicating 0 to 100%. This register will be clear after enters shutdown mode.
|
||||
*/
|
||||
static int cw_get_soh(struct cw_battery *cw_bat)
|
||||
{
|
||||
int ret;
|
||||
unsigned char reg_val;
|
||||
int soh;
|
||||
|
||||
ret = cw_read(cw_bat->client, REG_SOH, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
soh = reg_val;
|
||||
cw_bat->soh = soh;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* FW_VERSION register reports the firmware (FW) running in the chip. It is fixed to
|
||||
* 0x00 when the chip is in shutdown mode. When in active mode, Bit [7:6] = '01' stand
|
||||
* for the CW2217, Bit [7:6] = '00' stand for the CW2218 and Bit [7:6] = '10' stand for CW2215.
|
||||
* Bit[5:0] stand for the FW version running in the chip. Note that the FW version is
|
||||
* subject to update and contact sales office for confirmation when necessary.
|
||||
*/
|
||||
static int cw_get_fw_version(struct cw_battery *cw_bat)
|
||||
{
|
||||
int ret;
|
||||
unsigned char reg_val;
|
||||
int fw_version;
|
||||
|
||||
ret = cw_read(cw_bat->client, REG_FW_VERSION, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
fw_version = reg_val;
|
||||
cw_bat->fw_version = fw_version;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int cw_update_data(struct cw_battery *cw_bat)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
ret += cw_get_voltage(cw_bat);
|
||||
ret += cw_get_capacity(cw_bat);
|
||||
ret += cw_get_temp(cw_bat);
|
||||
ret += cw_get_current(cw_bat);
|
||||
ret += cw_get_cycle_count(cw_bat);
|
||||
ret += cw_get_soh(cw_bat);
|
||||
cw_printk("vol = %d current = %ld cap = %d temp = %d\n",
|
||||
cw_bat->voltage, cw_bat->cw_current, cw_bat->ui_soc, cw_bat->temp);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int cw_init_data(struct cw_battery *cw_bat)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
ret = cw_get_fw_version(cw_bat);
|
||||
if (ret != 0)
|
||||
return ret;
|
||||
|
||||
ret += cw_get_chip_id(cw_bat);
|
||||
ret += cw_get_voltage(cw_bat);
|
||||
ret += cw_get_capacity(cw_bat);
|
||||
ret += cw_get_temp(cw_bat);
|
||||
ret += cw_get_current(cw_bat);
|
||||
ret += cw_get_cycle_count(cw_bat);
|
||||
ret += cw_get_soh(cw_bat);
|
||||
|
||||
cw_printk("chip_id = %d vol = %d cur = %ld cap = %d temp = %d fw_version = %d\n",
|
||||
cw_bat->chip_id, cw_bat->voltage, cw_bat->cw_current,
|
||||
cw_bat->ui_soc, cw_bat->temp, cw_bat->fw_version);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int cw221x_parse_properties(struct cw_battery *cw_bat)
|
||||
{
|
||||
struct device *dev = cw_bat->dev;
|
||||
int length;
|
||||
int ret;
|
||||
|
||||
length = device_property_count_u8(dev, "cellwise,battery-profile");
|
||||
if (length < 0) {
|
||||
dev_warn(cw_bat->dev,
|
||||
"No battery-profile found, using current flash contents\n");
|
||||
} else if (length != SIZE_OF_PROFILE) {
|
||||
dev_err(cw_bat->dev, "battery-profile must be %d bytes\n",
|
||||
SIZE_OF_PROFILE);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
cw_bat->bat_profile = devm_kzalloc(dev, length, GFP_KERNEL);
|
||||
if (!cw_bat->bat_profile)
|
||||
return -ENOMEM;
|
||||
|
||||
ret = device_property_read_u8_array(dev,
|
||||
"cellwise,battery-profile",
|
||||
cw_bat->bat_profile,
|
||||
length);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*CW221X update profile function, Often called during initialization*/
|
||||
static int cw_config_start_ic(struct cw_battery *cw_bat)
|
||||
{
|
||||
unsigned char reg_val;
|
||||
int count = 0;
|
||||
int ret;
|
||||
|
||||
ret = cw221X_sleep(cw_bat);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = cw221x_parse_properties(cw_bat);
|
||||
if (ret)
|
||||
/* update new battery info */
|
||||
ret = cw_write_profile(cw_bat->client, config_profile_info);
|
||||
else
|
||||
ret = cw_write_profile(cw_bat->client, cw_bat->bat_profile);
|
||||
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* set UPDATE_FLAG AND SOC INTTERRUP VALUE */
|
||||
reg_val = CONFIG_UPDATE_FLG | GPIO_SOC_IRQ_VALUE;
|
||||
ret = cw_write(cw_bat->client, REG_SOC_ALERT, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* close all interruptes */
|
||||
reg_val = 0;
|
||||
ret = cw_write(cw_bat->client, REG_GPIO_CONFIG, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = cw221X_active(cw_bat);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
while (CW_TRUE) {
|
||||
msleep(CW_SLEEP_100MS);
|
||||
cw_read(cw_bat->client, REG_IC_STATE, ®_val);
|
||||
if (IC_READY_MARK == (reg_val & IC_READY_MARK))
|
||||
break;
|
||||
count++;
|
||||
if (count >= CW_SLEEP_COUNTS) {
|
||||
cw221X_sleep(cw_bat);
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Get the cw221X running state
|
||||
* Determine whether the profile needs to be updated
|
||||
*/
|
||||
static int cw221X_get_state(struct cw_battery *cw_bat)
|
||||
{
|
||||
int ret;
|
||||
unsigned char reg_val;
|
||||
int i;
|
||||
int reg_profile;
|
||||
|
||||
ret = cw_read(cw_bat->client, REG_MODE_CONFIG, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
if (reg_val != CONFIG_MODE_ACTIVE)
|
||||
return CW221X_NOT_ACTIVE;
|
||||
|
||||
ret = cw_read(cw_bat->client, REG_SOC_ALERT, ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
if (0x00 == (reg_val & CONFIG_UPDATE_FLG))
|
||||
return CW221X_PROFILE_NOT_READY;
|
||||
|
||||
for (i = 0; i < SIZE_OF_PROFILE; i++) {
|
||||
ret = cw_read(cw_bat->client, (REG_BAT_PROFILE + i), ®_val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
reg_profile = REG_BAT_PROFILE + i;
|
||||
cw_printk("0x%2x = 0x%2x\n", reg_profile, reg_val);
|
||||
if (config_profile_info[i] != reg_val)
|
||||
break;
|
||||
}
|
||||
if (i != SIZE_OF_PROFILE)
|
||||
return CW221X_PROFILE_NEED_UPDATE;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* CW221X init function, Often called during initialization */
|
||||
static int cw_init(struct cw_battery *cw_bat)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = cw_get_chip_id(cw_bat);
|
||||
if (ret < 0) {
|
||||
dev_err(cw_bat->dev, "iic read write error");
|
||||
return ret;
|
||||
}
|
||||
if (cw_bat->chip_id != IC_VCHIP_ID) {
|
||||
dev_err(cw_bat->dev, "not cw221X\n");
|
||||
return -1;
|
||||
}
|
||||
|
||||
ret = cw221X_get_state(cw_bat);
|
||||
if (ret < 0) {
|
||||
dev_err(cw_bat->dev, "iic read write error");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (ret != 0) {
|
||||
ret = cw_config_start_ic(cw_bat);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
cw_printk("cw221X init success!\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void cw_bat_work(struct work_struct *work)
|
||||
{
|
||||
struct delayed_work *delay_work;
|
||||
struct cw_battery *cw_bat;
|
||||
int ret;
|
||||
|
||||
delay_work = container_of(work,
|
||||
struct delayed_work,
|
||||
work);
|
||||
cw_bat = container_of(delay_work,
|
||||
struct cw_battery,
|
||||
battery_delay_work);
|
||||
|
||||
ret = cw_update_data(cw_bat);
|
||||
if (ret < 0)
|
||||
dev_err(cw_bat->dev, "i2c read error when update data");
|
||||
|
||||
power_supply_changed(cw_bat->cw_bat);
|
||||
|
||||
queue_delayed_work(cw_bat->cwfg_workqueue,
|
||||
&cw_bat->battery_delay_work,
|
||||
msecs_to_jiffies(queue_delayed_work_time));
|
||||
}
|
||||
|
||||
static int cw_battery_set_property(struct power_supply *psy,
|
||||
enum power_supply_property psp,
|
||||
const union power_supply_propval *val)
|
||||
{
|
||||
/* struct cw_battery *cw_bat = power_supply_get_drvdata(psy); */
|
||||
int ret = 0;
|
||||
|
||||
switch (psp) {
|
||||
default:
|
||||
ret = -EINVAL;
|
||||
break;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int cw_battery_get_property(struct power_supply *psy,
|
||||
enum power_supply_property psp,
|
||||
union power_supply_propval *val)
|
||||
{
|
||||
struct cw_battery *cw_bat = power_supply_get_drvdata(psy);
|
||||
int ret = 0;
|
||||
|
||||
switch (psp) {
|
||||
case POWER_SUPPLY_PROP_CYCLE_COUNT:
|
||||
val->intval = cw_bat->cycle;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_CAPACITY:
|
||||
val->intval = cw_bat->ui_soc;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_HEALTH:
|
||||
val->intval = POWER_SUPPLY_HEALTH_GOOD;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_PRESENT:
|
||||
val->intval = (cw_bat->voltage <= 0) ? 0 : 1;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
||||
val->intval = cw_bat->voltage * CW_VOL_UNIT;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
||||
val->intval = cw_bat->cw_current;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_TECHNOLOGY:
|
||||
val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
|
||||
break;
|
||||
case POWER_SUPPLY_PROP_TEMP:
|
||||
val->intval = cw_bat->temp;
|
||||
break;
|
||||
default:
|
||||
ret = -EINVAL;
|
||||
break;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static enum power_supply_property cw_battery_properties[] = {
|
||||
POWER_SUPPLY_PROP_CYCLE_COUNT,
|
||||
POWER_SUPPLY_PROP_CAPACITY,
|
||||
POWER_SUPPLY_PROP_HEALTH,
|
||||
POWER_SUPPLY_PROP_PRESENT,
|
||||
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
||||
POWER_SUPPLY_PROP_CURRENT_NOW,
|
||||
POWER_SUPPLY_PROP_TECHNOLOGY,
|
||||
POWER_SUPPLY_PROP_TEMP,
|
||||
};
|
||||
|
||||
static int cw221X_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
||||
{
|
||||
struct power_supply_config psy_cfg = {0};
|
||||
struct power_supply_desc *psy_desc;
|
||||
struct cw_battery *cw_bat;
|
||||
int loop = 0;
|
||||
int ret;
|
||||
|
||||
cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL);
|
||||
if (!cw_bat)
|
||||
return -ENOMEM;
|
||||
|
||||
i2c_set_clientdata(client, cw_bat);
|
||||
cw_bat->client = client;
|
||||
cw_bat->dev = &client->dev;
|
||||
|
||||
ret = cw_init(cw_bat);
|
||||
while ((loop++ < CW_RETRY_COUNT) && (ret != 0)) {
|
||||
msleep(CW_SLEEP_200MS);
|
||||
ret = cw_init(cw_bat);
|
||||
}
|
||||
if (ret) {
|
||||
dev_err(cw_bat->dev, "cw221X init fail!\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = cw_init_data(cw_bat);
|
||||
if (ret) {
|
||||
dev_err(cw_bat->dev, "cw221X init data fail!\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
psy_desc = devm_kzalloc(&client->dev, sizeof(*psy_desc), GFP_KERNEL);
|
||||
if (!psy_desc)
|
||||
return -ENOMEM;
|
||||
psy_cfg.drv_data = cw_bat;
|
||||
psy_desc->name = CW_PROPERTIES;
|
||||
psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
|
||||
psy_desc->properties = cw_battery_properties;
|
||||
psy_desc->num_properties = ARRAY_SIZE(cw_battery_properties);
|
||||
psy_desc->get_property = cw_battery_get_property;
|
||||
psy_desc->set_property = cw_battery_set_property;
|
||||
cw_bat->cw_bat = devm_power_supply_register(&client->dev, psy_desc, &psy_cfg);
|
||||
if (IS_ERR(cw_bat->cw_bat)) {
|
||||
ret = PTR_ERR(cw_bat->cw_bat);
|
||||
dev_err(cw_bat->dev, "failed to register battery: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
cw_bat->cwfg_workqueue = create_singlethread_workqueue("cwfg_gauge");
|
||||
INIT_DELAYED_WORK(&cw_bat->battery_delay_work, cw_bat_work);
|
||||
queue_delayed_work(cw_bat->cwfg_workqueue,
|
||||
&cw_bat->battery_delay_work,
|
||||
msecs_to_jiffies(queue_start_work_time));
|
||||
|
||||
cw_printk("cw221X driver probe success!\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int cw221X_remove(struct i2c_client *client)
|
||||
{
|
||||
struct cw_battery *cw_bat = i2c_get_clientdata(client);
|
||||
|
||||
cancel_delayed_work_sync(&cw_bat->battery_delay_work);
|
||||
destroy_workqueue(cw_bat->cwfg_workqueue);
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int cw_bat_suspend(struct device *dev)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct cw_battery *cw_bat = i2c_get_clientdata(client);
|
||||
|
||||
cancel_delayed_work(&cw_bat->battery_delay_work);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int cw_bat_resume(struct device *dev)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct cw_battery *cw_bat = i2c_get_clientdata(client);
|
||||
|
||||
queue_delayed_work(cw_bat->cwfg_workqueue,
|
||||
&cw_bat->battery_delay_work,
|
||||
msecs_to_jiffies(20));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct dev_pm_ops cw_bat_pm_ops = {
|
||||
.suspend = cw_bat_suspend,
|
||||
.resume = cw_bat_resume,
|
||||
};
|
||||
#endif
|
||||
|
||||
static const struct i2c_device_id cw221X_id_table[] = {
|
||||
{ CWFG_NAME, 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, cw221X_id_table);
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id cw221X_match_table[] = {
|
||||
{ .compatible = "cellwise,cw221X", },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, cw221X_match_table);
|
||||
#endif
|
||||
|
||||
static struct i2c_driver cw221X_driver = {
|
||||
.driver = {
|
||||
.name = CWFG_NAME,
|
||||
#ifdef CONFIG_PM
|
||||
.pm = &cw_bat_pm_ops,
|
||||
#endif
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(cw221X_match_table),
|
||||
},
|
||||
.probe = cw221X_probe,
|
||||
.remove = cw221X_remove,
|
||||
.id_table = cw221X_id_table,
|
||||
};
|
||||
|
||||
module_i2c_driver(cw221X_driver);
|
||||
|
||||
MODULE_AUTHOR("Xu Shengfei <xsf@rock-chips.com>");
|
||||
MODULE_DESCRIPTION("CW221X FGADC Device Driver V0.1");
|
||||
MODULE_LICENSE("GPL");
|
||||
Reference in New Issue
Block a user