mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-07 03:15:31 +09:00
ARM: dts: rockchip: add voice module boards v11 for RK3308
Separate the power supply to arm&logic, arm freq support 1.2G, disable vad and include rk3308k.dtsi Change-Id: I91516773e74fd098117bfdcf8213803e19cf7527 Signed-off-by: Lin Jianhua <linjh@rock-chips.com>
This commit is contained in:
Lin Jianhua
@@ -573,6 +573,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
||||
rk3308-evb-dmic-i2s-v10-aarch32.dtb \
|
||||
rk3308-evb-dmic-pdm-v11-aarch32.dtb \
|
||||
rk3308-voice-module-board-v10-aarch32.dtb \
|
||||
rk3308-voice-module-board-v11-aarch32.dtb \
|
||||
rk3308-voice-module-amic-mainboard-v10-aarch32.dtb \
|
||||
rk3308-voice-module-pdm-mainboard-v10-aarch32.dtb \
|
||||
rk3308b-evb-amic-v10-aarch32.dtb
|
||||
|
||||
32
arch/arm/boot/dts/rk3308-voice-module-board-v11-aarch32.dts
Normal file
32
arch/arm/boot/dts/rk3308-voice-module-board-v11-aarch32.dts
Normal file
@@ -0,0 +1,32 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3308-voice-module-v11-aarch32.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3308 Voice Module Board V11 (AArch32)";
|
||||
compatible = "rockchip,rk3308-voice-module-board-v11-aarch32", "rockchip,rk3308";
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_wake_host>;
|
||||
wifi_chip_type = "rtl8189fs";
|
||||
WIFI,host_wake_irq = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&acodec {
|
||||
status = "okay";
|
||||
rockchip,no-deep-low-power;
|
||||
/* ADC5-6 for 2ch capture, loopback to ADC3-4 */
|
||||
rockchip,adc-grps-route = <2 1 3 0>;
|
||||
/* The grp2 (ADC5-6) keeps enabled always for VAD */
|
||||
rockchip,en-always-grps = <2>;
|
||||
};
|
||||
384
arch/arm/boot/dts/rk3308-voice-module-v11-aarch32.dtsi
Normal file
384
arch/arm/boot/dts/rk3308-voice-module-v11-aarch32.dtsi
Normal file
@@ -0,0 +1,384 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*/
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "arm64/rockchip/rk3308k.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3308 Voice Module Board V11";
|
||||
compatible = "rockchip,rk3308-vmb-v11", "rockchip,rk3308";
|
||||
|
||||
chosen {
|
||||
bootargs = "earlycon=uart8250,mmio32,0xff0c0000 swiotlb=1 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootfstype=squashfs rootwait snd_aloop.index=7";
|
||||
};
|
||||
|
||||
acodec_sound: acodec-sound {
|
||||
compatible = "rockchip,multicodecs-card";
|
||||
rockchip,card-name = "rockchip,rk3308-acodec";
|
||||
rockchip,codec-hp-det;
|
||||
rockchip,mclk-fs = <256>;
|
||||
rockchip,cpu = <&i2s_8ch_2>;
|
||||
rockchip,codec = <&acodec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
poll-interval = <100>;
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
|
||||
esc-key {
|
||||
linux,code = <KEY_MICMUTE>;
|
||||
label = "micmute";
|
||||
press-threshold-microvolt = <1130000>;
|
||||
};
|
||||
|
||||
home-key {
|
||||
linux,code = <KEY_MODE>;
|
||||
label = "mode";
|
||||
press-threshold-microvolt = <901000>;
|
||||
};
|
||||
|
||||
menu-key {
|
||||
linux,code = <KEY_PLAY>;
|
||||
label = "play";
|
||||
press-threshold-microvolt = <624000>;
|
||||
};
|
||||
|
||||
vol-down-key {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
label = "volume down";
|
||||
press-threshold-microvolt = <300000>;
|
||||
};
|
||||
|
||||
vol-up-key {
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
label = "volume up";
|
||||
press-threshold-microvolt = <18000>;
|
||||
};
|
||||
};
|
||||
|
||||
bluetooth_sound: bluetooth-sound {
|
||||
status = "disabled";
|
||||
compatible = "rockchip,multicodecs-card";
|
||||
rockchip,card-name = "rockchip,rk3308-pcm";
|
||||
rockchip,mclk-fs = <128>;
|
||||
rockchip,cpu = <&i2s_2ch_0>;
|
||||
rockchip,codec = <&dummy_codec>;
|
||||
rockchip,format = "dsp_b";
|
||||
rockchip,wait-card-locked = <0>;
|
||||
};
|
||||
|
||||
dummy_codec: dummy-codec {
|
||||
compatible = "rockchip,dummy-codec";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
spdif_rx_sound: spdif-rx-sound {
|
||||
status = "disabled";
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "rockchip,spdif-rx-sound";
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&spdif_rx>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&dummy_codec>;
|
||||
};
|
||||
};
|
||||
|
||||
spdif_tx_sound: spdif-tx-sound {
|
||||
status = "disabled";
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "rockchip,spdif-tx-sound";
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&spdif_tx>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&dummy_codec>;
|
||||
};
|
||||
};
|
||||
|
||||
vad-sound {
|
||||
status = "disabled";
|
||||
compatible = "rockchip,multicodecs-card";
|
||||
rockchip,card-name = "rockchip,rk3308-vad";
|
||||
rockchip,codec-hp-det;
|
||||
rockchip,cpu = <&i2s_8ch_2>;
|
||||
rockchip,codec = <&acodec>, <&vad>;
|
||||
};
|
||||
|
||||
vdd_core: vdd-core {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm0 0 5000 1>;
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <827000>;
|
||||
regulator-max-microvolt = <1340000>;
|
||||
regulator-init-microvolt = <1015000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
vdd_1v0: vdd-1v0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_1v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
vccio_sdio: vcc_1v8: vcc-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
vcc_ddr: vcc-ddr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
};
|
||||
|
||||
vcc_io: vcc-io {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_io";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vbus_host: vbus-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_drv>;
|
||||
regulator-name = "vbus_host";
|
||||
};
|
||||
};
|
||||
|
||||
&acodec {
|
||||
status = "disabled";
|
||||
|
||||
rockchip,no-hp-det;
|
||||
rockchip,delay-start-play-ms = <200>;
|
||||
rockchip,loopback-grp = <1>;
|
||||
spk-ctl-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_core>;
|
||||
};
|
||||
|
||||
&cpu0_opp_table {
|
||||
opp-1200000000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&dmc {
|
||||
center-supply = <&vdd_log>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fiq_debugger {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s_2ch_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s_8ch_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
vccio0-supply = <&vcc_io>;
|
||||
vccio1-supply = <&vcc_io>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vcc_io>;
|
||||
vccio4-supply = <&vccio_sdio>;
|
||||
vccio5-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
&nandc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
buttons {
|
||||
pwr_key: pwr-key {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usb_drv: usb-drv {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
wifi_wake_host: wifi-wake-host {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "active";
|
||||
pinctrl-0 = <&pwm0_pin_pull_down>;
|
||||
};
|
||||
|
||||
&ramoops {
|
||||
record-size = <0x0 0x00000>;
|
||||
console-size = <0x0 0x20000>;
|
||||
};
|
||||
|
||||
&ramoops_mem {
|
||||
reg = <0x0 0x30000 0x0 0x20000>;
|
||||
};
|
||||
|
||||
&rk_timer_rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rockchip_suspend {
|
||||
rockchip,pwm-regulator-config = <
|
||||
(0
|
||||
| RKPM_PWM_REGULATOR
|
||||
)
|
||||
>;
|
||||
|
||||
rockchip,wakeup-config = <
|
||||
(0
|
||||
| RKPM_GPIO0_WAKEUP_EN
|
||||
| RKPM_TIMER_WAKEUP_EN
|
||||
)
|
||||
>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&sdio {
|
||||
max-frequency = <110000000>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
supports-sdio;
|
||||
ignore-pm-notify;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
supports-sd;
|
||||
card-detect-delay = <300>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
u-boot,dm-pre-reloc;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
|
||||
u2phy_host: host-port {
|
||||
phy-supply = <&vbus_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci{
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vad {
|
||||
status = "disabled";
|
||||
rockchip,audio-src = <&i2s_8ch_2>;
|
||||
rockchip,det-channel = <0>;
|
||||
rockchip,mode = <1>;
|
||||
rockchip,buffer-time-ms = <500>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
Reference in New Issue
Block a user