mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-07 19:30:30 +09:00
ARM64: dts: rk3399: add new dts for tve1205g
Change-Id: I698a0cb3efa998c3c5cd53e238c656fba82e15cc Signed-off-by: Zhou weixin <zwx@rock-chips.com>
This commit is contained in:
Zhou weixin
@@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-disvr.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-edp.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-edp-next.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-linux.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-tve1205g.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-vr-android.dtb
|
||||
|
||||
always := $(dtb-y)
|
||||
|
||||
903
arch/arm64/boot/dts/rockchip/rk3399-tve1205g.dts
Normal file
903
arch/arm64/boot/dts/rockchip/rk3399-tve1205g.dts
Normal file
@@ -0,0 +1,903 @@
|
||||
/*
|
||||
* Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/pinctrl/rk.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-android-next.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
#include <dt-bindings/sensor-dev.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
|
||||
/ {
|
||||
compatible = "rockchip,rk3399-mid", "rockchip,rk3399";
|
||||
|
||||
edp_panel: edp-panel {
|
||||
compatible = "auo,b125han03", "panel-simple";
|
||||
backlight = <&backlight>;
|
||||
power-supply = <&vcc3v3_s0>;
|
||||
enable-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
|
||||
ports {
|
||||
panel_in_edp: endpoint {
|
||||
remote-endpoint = <&edp_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3900000>;
|
||||
regulator-max-microvolt = <3900000>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&host_vbus_drv>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 0>;
|
||||
rockchip,pwm_id= <2>;
|
||||
rockchip,pwm_voltage = <1000000>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm0 0 25000 PWM_POLARITY_INVERTED>;
|
||||
brightness-levels = <
|
||||
0 1 51 52 52 53 53 54
|
||||
54 55 55 56 56 57 57 58
|
||||
58 59 59 60 61 61 62 63
|
||||
63 64 65 65 66 67 67 68
|
||||
69 69 70 71 71 72 73 73
|
||||
74 75 75 76 77 77 78 79
|
||||
79 80 80 81 81 82 83 83
|
||||
84 85 86 86 87 88 89 89
|
||||
90 91 92 92 93 94 95 95
|
||||
96 97 98 98 99 100 101 101
|
||||
102 103 104 104 105 106 107 107
|
||||
108 109 110 110 111 112 113 113
|
||||
114 115 116 116 117 118 119 119
|
||||
120 121 122 122 123 124 125 125
|
||||
126 127 128 128 129 130 131 131
|
||||
132 133 134 134 135 136 137 137
|
||||
138 139 140 140 141 142 143 143
|
||||
144 145 146 146 147 148 149 149
|
||||
150 151 152 152 153 154 155 155
|
||||
156 157 158 158 159 160 161 161
|
||||
162 163 164 164 165 166 167 167
|
||||
168 169 170 170 171 172 173 173
|
||||
174 175 176 176 177 178 179 179
|
||||
180 181 182 182 183 184 185 185
|
||||
186 187 188 188 189 190 191 191
|
||||
216 217 218 218 219 220 221 221
|
||||
222 223 224 224 225 226 227 227
|
||||
228 229 230 230 231 232 233 233
|
||||
234 235 236 236 237 238 239 239
|
||||
240 241 242 242 243 244 245 245
|
||||
246 247 248 248 249 250 251 251
|
||||
252 253 254 254 255 255 255 255>;
|
||||
default-brightness-level = <200>;
|
||||
enable-gpios = <&gpio3 GPIO_A4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
io-domains {
|
||||
compatible = "rockchip,rk3399-io-voltage-domain";
|
||||
rockchip,grf = <&grf>;
|
||||
|
||||
bt656-supply = <&vcc_3v0>;
|
||||
audio-supply = <&vcca1v8_codec>;
|
||||
sdmmc-supply = <&vcc_sd>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
};
|
||||
|
||||
pmu-io-domains {
|
||||
compatible = "rockchip,rk3399-pmu-io-voltage-domain";
|
||||
rockchip,grf = <&pmugrf>;
|
||||
|
||||
pmu1830-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
es8316-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "rockchip,es8316-codec";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Mic Jack",
|
||||
"Headphone", "Headphone Jack";
|
||||
simple-audio-card,routing =
|
||||
"Mic Jack", "MICBIAS1",
|
||||
"IN1P", "Mic Jack",
|
||||
"Headphone Jack", "HPOL",
|
||||
"Headphone Jack", "HPOR";
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&es8316>;
|
||||
};
|
||||
};
|
||||
|
||||
spdif-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "rockchip,spdif";
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&spdif>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&spdif_out>;
|
||||
};
|
||||
};
|
||||
|
||||
spdif_out: spdif-out {
|
||||
compatible = "linux,spdif-dit";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; /* GPIO0_B2 */
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
wifi_chip_type = "ap6354";
|
||||
sdio_vref = <1800>;
|
||||
WIFI,host_wake_irq = <&gpio0 3 GPIO_ACTIVE_HIGH>; /* GPIO0_a3 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
//wifi-bt-power-toggle;
|
||||
uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; /* GPIO2_C3 */
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart0_rts>;
|
||||
pinctrl-1 = <&uart0_gpios>;
|
||||
//BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; /* GPIOx_xx */
|
||||
BT,reset_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; /* GPIO0_B1 */
|
||||
BT,wake_gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; /* GPIO2_D2 */
|
||||
BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* GPIO0_A4 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
uboot-charge {
|
||||
compatible = "rockchip,uboot-charge";
|
||||
rockchip,uboot-charge-on = <0>;
|
||||
rockchip,android-charge-on = <1>;
|
||||
};
|
||||
|
||||
vibrator {
|
||||
compatible = "rk-vibrator-gpio";
|
||||
vibrator-gpio = <&gpio4 30 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rk_headset {
|
||||
compatible = "rockchip_headset";
|
||||
headset_gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_det>;
|
||||
io-channels = <&saradc 2>;
|
||||
};
|
||||
};
|
||||
|
||||
&rk_key {
|
||||
compatible = "rockchip,key";
|
||||
status = "okay";
|
||||
|
||||
io-channels = <&saradc 1>;
|
||||
|
||||
vol-up-key {
|
||||
linux,code = <114>;
|
||||
label = "volume up";
|
||||
rockchip,adc_value = <1>;
|
||||
};
|
||||
|
||||
vol-down-key {
|
||||
linux,code = <115>;
|
||||
label = "volume down";
|
||||
rockchip,adc_value = <170>;
|
||||
};
|
||||
|
||||
power-key {
|
||||
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <116>;
|
||||
label = "power";
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
menu-key {
|
||||
linux,code = <59>;
|
||||
label = "menu";
|
||||
rockchip,adc_value = <746>;
|
||||
};
|
||||
|
||||
home-key {
|
||||
linux,code = <102>;
|
||||
label = "home";
|
||||
rockchip,adc_value = <355>;
|
||||
};
|
||||
|
||||
back-key {
|
||||
linux,code = <158>;
|
||||
label = "back";
|
||||
rockchip,adc_value = <560>;
|
||||
};
|
||||
|
||||
camera-key {
|
||||
linux,code = <212>;
|
||||
label = "camera";
|
||||
rockchip,adc_value = <450>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
clock-frequency = <50000000>;
|
||||
clock-freq-min-max = <400000 150000000>;
|
||||
supports-sd;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
num-slots = <1>;
|
||||
//sd-uhs-sdr104;
|
||||
vqmmc-supply = <&vcc_sd>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
clock-frequency = <150000000>;
|
||||
clock-freq-min-max = <200000 150000000>;
|
||||
supports-sdio;
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
supports-emmc;
|
||||
non-removable;
|
||||
keep-power-in-suspend;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
status = "okay";
|
||||
rockchip,i2s-broken-burst-len;
|
||||
rockchip,playback-channels = <8>;
|
||||
rockchip,capture-channels = <8>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
&spdif {
|
||||
status = "okay";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <180>;
|
||||
i2c-scl-falling-time-ns = <30>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
vdd_cpu_b: syr837@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
pinctrl-0 = <&vsel1_gpio>;
|
||||
vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-initial-state = <3>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: syr828@41 {
|
||||
compatible = "silergy,syr828";
|
||||
status = "okay";
|
||||
reg = <0x41>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
pinctrl-0 = <&vsel2_gpio>;
|
||||
vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <735000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
vcc10-supply = <&vcc3v3_sys>;
|
||||
vcc11-supply = <&vcc3v3_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc1v8_pmu>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-name = "vdd_center";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v0_tp: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc3v0_tp";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca3v0_codec: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcca3v0_codec";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_codec: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_codec";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <140>;
|
||||
i2c-scl-falling-time-ns = <30>;
|
||||
|
||||
es8316: es8316@10 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "everest,es8316";
|
||||
reg = <0x11>;
|
||||
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
||||
clock-names = "mclk";
|
||||
spk-con-gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <345>;
|
||||
i2c-scl-falling-time-ns = <11>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
touchpad: touchpad@2c {
|
||||
compatible = "hid-over-i2c";
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <GPIO_C2 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&touchpad_irq_gpio>;
|
||||
reg = <0x2c>;
|
||||
hid-descr-addr = <0x002c>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <345>;
|
||||
i2c-scl-falling-time-ns = <11>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
fusb1: fusb30x@22 {
|
||||
compatible = "fairchild,fusb302";
|
||||
reg = <0x22>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fusb1_int>;
|
||||
vbus-5v-gpios = <&gpio4 GPIO_D6 GPIO_ACTIVE_LOW>;
|
||||
int-n-gpios = <&gpio1 GPIO_B5 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <345>;
|
||||
i2c-scl-falling-time-ns = <11>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
fusb0: fusb30x@22 {
|
||||
compatible = "fairchild,fusb302";
|
||||
reg = <0x22>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fusb0_int>;
|
||||
vbus-5v-gpios = <&gpio4 GPIO_D5 GPIO_ACTIVE_LOW>;
|
||||
int-n-gpios = <&gpio1 GPIO_A2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
mali-supply = <&vdd_gpu>;
|
||||
};
|
||||
|
||||
&rga {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
extcon = <&fusb0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
extcon = <&fusb1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
extcon = <&fusb0>;
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy0_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
extcon = <&fusb1>;
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
extcon = <&fusb0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
extcon = <&fusb1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart0_gpios: uart0-gpios {
|
||||
rockchip,pins = <2 19 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<1 21 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
vsel1_gpio: vsel1-gpio {
|
||||
rockchip,pins =
|
||||
<1 17 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
vsel2_gpio: vsel2-gpio {
|
||||
rockchip,pins =
|
||||
<1 14 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
headphone {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
touchpad {
|
||||
touchpad_irq_gpio: touchpad-irq-gpio {
|
||||
rockchip,pins = <1 GPIO_C2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
host_vbus_drv: host-vbus-drv {
|
||||
rockchip,pins =
|
||||
<4 25 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
fusb30x {
|
||||
fusb0_int: fusb0-int {
|
||||
rockchip,pins =
|
||||
<1 GPIO_A2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
fusb1_int: fusb1-int {
|
||||
rockchip,pins =
|
||||
<1 GPIO_B5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&edp {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
edp_out: port@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
edp_out_panel: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&panel_in_edp>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_dsi {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&vpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvdec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&route_edp {
|
||||
status = "okay";
|
||||
logo,mode = "center";
|
||||
};
|
||||
@@ -550,6 +550,7 @@ CONFIG_HID_ZEROPLUS=y
|
||||
CONFIG_HID_ZYDACRON=y
|
||||
CONFIG_HID_RKVR=y
|
||||
CONFIG_USB_HIDDEV=y
|
||||
CONFIG_I2C_HID=y
|
||||
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
|
||||
Reference in New Issue
Block a user