ARM: dts: rockchip: add peripherals support for rv1126 bat board

add rtc and  battery support

Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Change-Id: I735b99dd27001a7352217bbb554f97640065f083
This commit is contained in:
Nickey Yang
2020-08-21 18:14:23 +08:00
parent e80932a284
commit 82a3ccbb1c

View File

@@ -78,6 +78,8 @@
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1000000>;
regulator-init-microvolt = <824000>;
pinctrl-names = "default";
pinctrl-0 = <&power_hold>;
regulator-always-on;
regulator-boot-on;
regulator-settling-time-up-us = <250>;
@@ -110,10 +112,61 @@
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <100000>;
CW2015@62 {
compatible = "cw201x";
reg = <0x62>;
bat_low_gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>;
dc_det_gpio = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
chg_ok_gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
bat_config_info = <0x15 0x42 0x60 0x59 0x52 0x58 0x4D 0x48 0x48 0x44 0x44
0x46 0x49 0x48 0x32 0x24 0x20 0x17 0x13 0x0F 0x19 0x3E
0x51 0x45 0x08 0x76 0x0B 0x85 0x0E 0x1C 0x2E 0x3E 0x4D
0x52 0x52 0x57 0x3D 0x1B 0x6A 0x2D 0x25 0x43 0x52 0x87
0x8F 0x91 0x94 0x52 0x82 0x8C 0x92 0x96 0xFF 0x7B 0xBB
0xCB 0x2F 0x7D 0x72 0xA5 0xB5 0xC1 0x46 0xAE>;
monitor_sec = <5>;
virtual_power = <0>;
divider_res1 = <200>;
divider_res2 = <200>;
};
pcf8563: pcf8563@51 {
compatible = "pcf8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
};
};
&npu {
npu-supply = <&vdd_npu_vepu>;
};
&pinctrl {
regulator {
/omit-if-no-ref/
power_hold: power-hold {
rockchip,pins =
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
rtc {
/omit-if-no-ref/
rtc_int: rtc-int {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pmu_io_domains {
status = "okay";
@@ -161,3 +214,7 @@
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&u2phy0 {
vup-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
};