arm64: dts: p230: add dvb module

PD#172865

Problem:
Customer requests a new release for linux dvb
Need enable dvb for QA testing

Solution:
Need enable dvb for QA testing

Verify:

Change-Id: Ib082c457d6f43ef4d6a5d16059a7e8ce068a332e
Signed-off-by: yeping.miao <yeping.miao@amlogic.com>

arch/arm64/boot/dts/amlogic/gxl_p230_2g_buildroot.dts

@@ -1284,6 +1284,44 @@
 			key-permit = "read","write","del";
 		};
 	};//End unifykey
+	dvb {
+		compatible = "amlogic, dvb";
+		dev_name = "dvb";
+
+		fe0_mode = "external";
+		fe0_demod = "Atbm8881";
+		fe0_i2c_adap_id = <&i2c1>;
+		fe0_demod_i2c_addr = <0xc0>;
+		fe0_ts = <0>;
+		fe0_reset_value = <0>;
+		fe0_reset_gpio = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH>;
+
+		ts0 = "parallel";
+		ts0_control = <0>;
+		ts0_invert = <0>;
+		interrupts = <0 23 1
+		0 5 1
+		0 21 1
+		0 19 1
+		0 25 1
+		0 18 1
+		0 24 1>;
+		interrupt-names = "demux0_irq",
+		"demux1_irq",
+		"demux2_irq",
+		"dvr0_irq",
+		"dvr1_irq",
+		"dvrfill0_fill",
+		"dvrfill1_flush";
+		pinctrl-names = "p_ts0", "s_ts0";
+		pinctrl-0 = <&dvb_p_ts0_pins>;
+		pinctrl-1 = <&dvb_s_ts0_pins>;
+		clocks = <&clkc CLKID_DEMUX
+		&clkc CLKID_ASYNC_FIFO
+		&clkc CLKID_AHB_ARB0
+		&clkc CLKID_HIU_IFACE>;
+		clock-names = "demux", "asyncfifo", "ahbarb0", "uparsertop";
+	};
 };
 &efuse {
 	status = "ok";
@@ -1297,6 +1335,13 @@
 	status = "okay";
 };
 
+&i2c1 {
+	status = "okay";
+	clock-frequency = <300000>;
+	pinctrl-names="default";
+	pinctrl-0=<&b_i2c_master>;
+};
+
 &pinctrl_periphs {
 	hdmirx_ext_pins: hdmirx_ext_pins {
 		mux {