shinys000114/linux
1
0
Fork 0
mirror of https://github.com/hardkernel/linux.git synced 2026-06-08 20:07:46 +09:00
Code Issues Packages Projects Releases Wiki Activity

ath10k: add BMI parameters to fix calibration from DT/pre-cal

Browse Source 
[ Upstream commit a9f5f287fa ]

QCA99X0, QCA9888, QCA9984 supports calibration data in
either OTP or DT/pre-cal file. Current ath10k supports
Calibration data from OTP only.

If caldata is loaded from DT/pre-cal file, fetching board id
and applying calibration parameters like tx power gets failed.

error log:
[   15.733663] ath10k_pci 0000:01:00.0: failed to fetch board file: -2
[   15.741474] ath10k_pci 0000:01:00.0: could not probe fw (-2)

This patch adds calibration data support from DT/pre-cal
file.  Below parameters are used to get board id and
applying calibration parameters from cal data.

		EEPROM[OTP]	FLASH[DT/pre-cal file]
Cal param	0x700		0x10000
Board id	0x10		0x8000

Tested on QCA9888 with pre-cal file.

Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Anilkumar Kolli
2017-05-31 14:21:27 +03:00
committed by Greg Kroah-Hartman
parent 00ceff917d
commit a576086965
2 changed files with 15 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/net/wireless/ath/ath10k/bmi.h
View File

@@ -83,6 +83,8 @@ enum bmi_cmd_id {
#define BMI_NVRAM_SEG_NAME_SZ 16
#define BMI_PARAM_GET_EEPROM_BOARD_ID 0x10
#define BMI_PARAM_GET_FLASH_BOARD_ID 0x8000
#define BMI_PARAM_FLASH_SECTION_ALL 0x10000
#define ATH10K_BMI_BOARD_ID_FROM_OTP_MASK 0x7c00
#define ATH10K_BMI_BOARD_ID_FROM_OTP_LSB 10

16
drivers/net/wireless/ath/ath10k/core.c
View File

@@ -652,7 +652,7 @@ static int ath10k_core_get_board_id_from_otp(struct ath10k *ar)
{
u32 result, address;
u8 board_id, chip_id;
int ret;
int ret, bmi_board_id_param;
address = ar->hw_params.patch_load_addr;
@@ -676,8 +676,13 @@ static int ath10k_core_get_board_id_from_otp(struct ath10k *ar)
return ret;
}
ret = ath10k_bmi_execute(ar, address, BMI_PARAM_GET_EEPROM_BOARD_ID,
&result);
if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT ||
ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE)
bmi_board_id_param = BMI_PARAM_GET_FLASH_BOARD_ID;
else
bmi_board_id_param = BMI_PARAM_GET_EEPROM_BOARD_ID;
ret = ath10k_bmi_execute(ar, address, bmi_board_id_param, &result);
if (ret) {
ath10k_err(ar, "could not execute otp for board id check: %d\n",
ret);
@@ -739,6 +744,11 @@ static int ath10k_download_and_run_otp(struct ath10k *ar)
return ret;
}
/* As of now pre-cal is valid for 10_4 variants */
if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT ||
ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE)
bmi_otp_exe_param = BMI_PARAM_FLASH_SECTION_ALL;
ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result);
if (ret) {
ath10k_err(ar, "could not execute otp (%d)\n", ret);