mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-05 02:21:52 +09:00
arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements
[ Upstream commit1c7412530d] According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. This fixes an issue where the Ethernet link doesn't come up when using ip link set down/up: [ 29.360965] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down [ 34.569012] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31) [ 34.676732] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma [ 34.678874] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed [ 34.687850] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed Fixes:658e4129bb("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/df3f5c4fc6e43c55429fd3662a636036a21eed49.1607363522.git.stefan@agner.ch Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
committed by
Greg Kroah-Hartman
parent
b9ee2a910d
commit
a83bf12907
@@ -413,7 +413,7 @@
|
||||
max-speed = <1000>;
|
||||
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-deassert-us = <80000>;
|
||||
reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
|
||||
|
||||
interrupt-parent = <&gpio_intc>;
|
||||
|
||||
Reference in New Issue
Block a user