shinys000114/linux
1
0
Fork 0
mirror of https://github.com/hardkernel/linux.git synced 2026-06-06 02:50:49 +09:00
Code Issues Packages Projects Releases Wiki Activity

arm64: dts: rockchip: rv1126b-evb1-v10: add wifibt node

Browse Source 
Change-Id: Iefd64dec86384a147843d63220144f87b13ca998
Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>
This commit is contained in:
Yao Xiao
2025-03-17 15:57:24 +08:00
committed by Tao Huang
parent d088ae268e
commit b6760dcaa9
1 changed files with 99 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

99
arch/arm64/boot/dts/rockchip/rv1126b-evb1-v10.dts
View File

@@ -11,6 +11,43 @@
model = "Rockchip RV1126B EVB1 V10 Board";
compatible = "rockchip,rv1126b-evb1-v10", "rockchip,rv1126b";
bt_sco: bt-sco {
status = "okay";
compatible = "delta,dfbmcs320";
#sound-dai-cells = <1>;
};
bt_sound: bt-sound {
status = "okay";
compatible = "simple-audio-card";
simple-audio-card,format = "dsp_a";
simple-audio-card,bitclock-inversion;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,name = "rockchip,bt";
simple-audio-card,cpu {
sound-dai = <&sai2>;
};
simple-audio-card,codec {
sound-dai = <&bt_sco 1>;
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
/*
* On the module itself this is one of these (depending
* on the actual card populated):
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
*/
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
vbus5v0_typec: vbus5v0-typec {
compatible = "regulator-fixed";
regulator-name = "vbus5v0_typec";
@@ -83,6 +120,25 @@
regulator-boot-on;
enable-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
pwm-supply = <&vcc5v0_sys>;
};
wireless-bluetooth {
compatible = "bluetooth-platdata";
uart_rts_gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "rts_gpio";
pinctrl-0 = <&uart2m0_rtsn_pins>;
pinctrl-1 = <&uart2_gpios>;
BT,power_gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
status = "okay";
};
wireless-wlan {
compatible = "wlan-platdata";
rockchip,grf = <&grf>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_wake_host>;
wifi_chip_type = "rk96x";
WIFI,host_wake_irq = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
@@ -222,6 +278,12 @@
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdmmc {
/omit-if-no-ref/
sdmmc_volt: sdmmc-volt {
@@ -238,6 +300,18 @@
rockchip,pins = <5 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wireless-bluetooth {
uart2_gpios: uart2-gpios {
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
wireless-wlan {
wifi_wake_host: wifi-wake-host {
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pwm2_8ch_4 {
@@ -245,6 +319,11 @@
status = "okay";
};
&sai2 {
rockchip,bclk-fs = <16>;
status = "okay";
};
&sdmmc0 {
max-frequency = <200000000>;
no-sdio;
@@ -259,6 +338,26 @@
status = "okay";
};
&sdmmc1 {
bus-width = <4>;
cap-sd-highspeed;
no-sd;
no-mmc;
max-frequency = <200000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_clk_pins &sdmmc1_cmd_pins &sdmmc1_bus4_pins>;
keep-power-in-suspend;
non-removable;
mmc-pwrseq = <&sdio_pwrseq>;
//sd-uhs-sdr104;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2m0_xfer_pins &uart2m0_ctsn_pins>;
};
&usb2phy_host {
phy-supply = <&vcc5v0_host>;
};