mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-05 10:31:46 +09:00
arm64: dts: rockchip: Add single/dual camera dtsi and rv1126bp-evb-v14 dtsi
Signed-off-by: Su Yuefu <yuefu.su@rock-chips.com> Change-Id: I090f11d77d4355d7b1ccf7e098770eab699f2f89
This commit is contained in:
Su Yuefu
38
arch/arm64/boot/dts/rockchip/rv1126bp-evb-cam-csi0.dtsi
Normal file
38
arch/arm64/boot/dts/rockchip/rv1126bp-evb-cam-csi0.dtsi
Normal file
@@ -0,0 +1,38 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
#include "rv1126b-evb-cam-csi0.dtsi"
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c1m2_pins>;
|
||||
|
||||
sc450ai: sc450ai@30 {
|
||||
compatible = "smartsens,sc450ai";
|
||||
status = "okay";
|
||||
reg = <0x30>;
|
||||
clocks = <&cru CLK_MIPI0_OUT2IO>;
|
||||
clock-names = "xvclk";
|
||||
reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pwdn-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam_clk0_pins>;
|
||||
rockchip,camera-module-index = <0>;
|
||||
rockchip,camera-module-facing = "back";
|
||||
rockchip,camera-module-name = "default";
|
||||
rockchip,camera-module-lens-name = "default";
|
||||
port {
|
||||
sc450ai_out: endpoint {
|
||||
remote-endpoint = <&csi_dphy_input0>;
|
||||
data-lanes = <1 2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "disabled";
|
||||
/delete-node/ sc450ai@30;
|
||||
};
|
||||
@@ -6,565 +6,10 @@
|
||||
/dts-v1/;
|
||||
#include "rv1126b.dtsi"
|
||||
#include "rv1126bp-evb.dtsi"
|
||||
#include "rv1126bp-evb-v14-cam.dtsi"
|
||||
#include "rv1126bp-evb-v14.dtsi"
|
||||
#include "rv1126bp-evb-cam-csi0.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RV1126B-P EVB V14 Board";
|
||||
compatible = "rockchip,rv1126bp-evb-v14", "rockchip,rv1126b";
|
||||
|
||||
rk809_sound: rk809-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "rockchip,rk809-codec";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&sai0>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809_codec>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc_mipi: vcc-mipi {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_mipi";
|
||||
gpio = <&gpio6 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3800000>;
|
||||
regulator-max-microvolt = <3800000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
uart_rts_gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart2m0_rtsn_pins>;
|
||||
pinctrl-1 = <&uart2_gpios>;
|
||||
BT,power_gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_wake_host>;
|
||||
wifi_chip_type = "rk96x";
|
||||
WIFI,host_wake_irq = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&backlight {
|
||||
pwms = <&pwm0_8ch_0 0 25000 0>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi_in_vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi_panel {
|
||||
power-supply = <&vcc_mipi>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
non-removable;
|
||||
mmc-hs200-1_8v;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
|
||||
snps,reset-gpio = <&gpio5 RK_PD4 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
|
||||
assigned-clocks = <&cru CLK_MAC_OUT2IO>;
|
||||
assigned-clock-rates = <25000000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ðm1_miim_pins
|
||||
ðm1_tx_bus2_pins
|
||||
ðm1_rx_bus2_pins
|
||||
ðm1_rgmii_clk_pins
|
||||
ðm1_rgmii_bus_pins
|
||||
ð_clk_25mm1_out_pins>;
|
||||
|
||||
tx_delay = <0x36>;
|
||||
rx_delay = <0x2c>;
|
||||
|
||||
phy-handle = <&rgmii_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PC0 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default", "pmic-sleep",
|
||||
"pmic-power-off";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
pinctrl-1 = <&soc_slppin_gpio>, <&rk817_slppin_slp>;
|
||||
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout2";
|
||||
//fb-inner-reg-idxs = <2>;
|
||||
/* 1: rst regs (default in codes), 0: rst the pmic */
|
||||
pmic-reset-func = <1>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
|
||||
pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl_rk8xx: pinctrl_rk8xx {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk817_slppin_null: rk817_slppin_null {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk817_slppin_slp: rk817_slppin_slp {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun1";
|
||||
};
|
||||
|
||||
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun2";
|
||||
};
|
||||
|
||||
rk817_slppin_rst: rk817_slppin_rst {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun3";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_npu: vdd_epu: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_arm: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sys: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_0v8: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-name = "vcc_0v8";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmu: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd0v8_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-name = "vcc0v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_dovdd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_dovdd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_dvdd: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "vcc_dvdd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1200000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_avdd: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-name = "vcc_avdd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <2800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_buck5: DCDC_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
regulator-name = "vcc_buck5";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2200000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc5v0_host: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc5v0_host";
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_3v3";
|
||||
};
|
||||
};
|
||||
|
||||
rk809_codec: codec {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "rockchip,rk809-codec", "rockchip,rk817-codec";
|
||||
clocks = <&sai0_mclkout>;
|
||||
clock-names = "mclk";
|
||||
assigned-clocks = <&sai0_mclkout>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai0m0_mclk_pins>;
|
||||
hp-volume = <20>;
|
||||
spk-volume = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
pinctrl-0 = <&i2c5m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
gt1x: gt1x@14 {
|
||||
compatible = "goodix,gt1x";
|
||||
reg = <0x14>;
|
||||
pinctrl-names = "default";
|
||||
gtp_ics_slot_report;
|
||||
power-supply = <&vcc_mipi>;
|
||||
goodix,rst-gpio = <&gpio5 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
goodix,irq-gpio = <&gpio5 RK_PA6 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
rgmii_phy: phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
clocks = <&cru CLK_MAC_OUT2IO>;
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
soc_slppin_gpio: soc_slppin_gpio {
|
||||
rockchip,pins =
|
||||
<0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart2_gpios: uart2-gpios {
|
||||
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
wifi_wake_host: wifi-wake-host {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0_8ch_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp_vir0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknpu {
|
||||
rknpu-supply = <&vdd_npu>;
|
||||
};
|
||||
|
||||
&route_dsi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sai0 {
|
||||
status = "okay";
|
||||
rockchip,sai-rx-route = <3 1 2 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai0m0_lrck_pins
|
||||
&sai0m0_sclk_pins
|
||||
&sai0m0_sdi3_pins
|
||||
&sai0m0_sdo0_pins>;
|
||||
};
|
||||
|
||||
&sai0_mclkout {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc0 {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
no-sd;
|
||||
no-mmc;
|
||||
max-frequency = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_clk_pins &sdmmc1_cmd_pins &sdmmc1_bus4_pins>;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2m0_xfer_pins &uart2m0_ctsn_pins>;
|
||||
};
|
||||
|
||||
&usb2phy_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
};
|
||||
|
||||
&usb_drd_dwc3 {
|
||||
extcon = <&usb2phy>;
|
||||
phys = <&usb2phy_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
maximum-speed = "high-speed";
|
||||
snps,dis_u2_susphy_quirk;
|
||||
snps,usb2-lpm-disable;
|
||||
snps,usb2-gadget-lpm-disable;
|
||||
};
|
||||
|
||||
562
arch/arm64/boot/dts/rockchip/rv1126bp-evb-v14.dtsi
Normal file
562
arch/arm64/boot/dts/rockchip/rv1126bp-evb-v14.dtsi
Normal file
@@ -0,0 +1,562 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/ {
|
||||
rk809_sound: rk809-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "rockchip,rk809-codec";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&sai0>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809_codec>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc_mipi: vcc-mipi {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_mipi";
|
||||
gpio = <&gpio6 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3800000>;
|
||||
regulator-max-microvolt = <3800000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
uart_rts_gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart2m0_rtsn_pins>;
|
||||
pinctrl-1 = <&uart2_gpios>;
|
||||
BT,power_gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_wake_host>;
|
||||
wifi_chip_type = "rk96x";
|
||||
WIFI,host_wake_irq = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&backlight {
|
||||
pwms = <&pwm0_8ch_0 0 25000 0>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi_in_vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi_panel {
|
||||
power-supply = <&vcc_mipi>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
non-removable;
|
||||
mmc-hs200-1_8v;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
|
||||
snps,reset-gpio = <&gpio5 RK_PD4 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
|
||||
assigned-clocks = <&cru CLK_MAC_OUT2IO>;
|
||||
assigned-clock-rates = <25000000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ðm1_miim_pins
|
||||
ðm1_tx_bus2_pins
|
||||
ðm1_rx_bus2_pins
|
||||
ðm1_rgmii_clk_pins
|
||||
ðm1_rgmii_bus_pins
|
||||
ð_clk_25mm1_out_pins>;
|
||||
|
||||
tx_delay = <0x36>;
|
||||
rx_delay = <0x2c>;
|
||||
|
||||
phy-handle = <&rgmii_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PC0 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default", "pmic-sleep",
|
||||
"pmic-power-off";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
pinctrl-1 = <&soc_slppin_gpio>, <&rk817_slppin_slp>;
|
||||
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout2";
|
||||
//fb-inner-reg-idxs = <2>;
|
||||
/* 1: rst regs (default in codes), 0: rst the pmic */
|
||||
pmic-reset-func = <1>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
|
||||
pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl_rk8xx: pinctrl_rk8xx {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk817_slppin_null: rk817_slppin_null {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk817_slppin_slp: rk817_slppin_slp {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun1";
|
||||
};
|
||||
|
||||
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun2";
|
||||
};
|
||||
|
||||
rk817_slppin_rst: rk817_slppin_rst {
|
||||
pins = "gpio_slp";
|
||||
function = "pin_fun3";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_npu: vdd_epu: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_arm: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sys: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_0v8: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-name = "vcc_0v8";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmu: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd0v8_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-name = "vcc0v8_pmu";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_dovdd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_dovdd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_dvdd: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "vcc_dvdd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1200000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_avdd: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-name = "vcc_avdd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <2800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_buck5: DCDC_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
regulator-name = "vcc_buck5";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2200000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc5v0_host: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc5v0_host";
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_3v3";
|
||||
};
|
||||
};
|
||||
|
||||
rk809_codec: codec {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "rockchip,rk809-codec", "rockchip,rk817-codec";
|
||||
clocks = <&sai0_mclkout>;
|
||||
clock-names = "mclk";
|
||||
assigned-clocks = <&sai0_mclkout>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai0m0_mclk_pins>;
|
||||
hp-volume = <20>;
|
||||
spk-volume = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
pinctrl-0 = <&i2c5m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
gt1x: gt1x@14 {
|
||||
compatible = "goodix,gt1x";
|
||||
reg = <0x14>;
|
||||
pinctrl-names = "default";
|
||||
gtp_ics_slot_report;
|
||||
power-supply = <&vcc_mipi>;
|
||||
goodix,rst-gpio = <&gpio5 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
goodix,irq-gpio = <&gpio5 RK_PA6 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
rgmii_phy: phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
clocks = <&cru CLK_MAC_OUT2IO>;
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_dphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
soc_slppin_gpio: soc_slppin_gpio {
|
||||
rockchip,pins =
|
||||
<0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart2_gpios: uart2-gpios {
|
||||
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
wifi_wake_host: wifi-wake-host {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0_8ch_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkaiisp_vir0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknpu {
|
||||
rknpu-supply = <&vdd_npu>;
|
||||
};
|
||||
|
||||
&route_dsi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sai0 {
|
||||
status = "okay";
|
||||
rockchip,sai-rx-route = <3 1 2 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sai0m0_lrck_pins
|
||||
&sai0m0_sclk_pins
|
||||
&sai0m0_sdi3_pins
|
||||
&sai0m0_sdo0_pins>;
|
||||
};
|
||||
|
||||
&sai0_mclkout {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc0 {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
no-sd;
|
||||
no-mmc;
|
||||
max-frequency = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_clk_pins &sdmmc1_cmd_pins &sdmmc1_bus4_pins>;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2m0_xfer_pins &uart2m0_ctsn_pins>;
|
||||
};
|
||||
|
||||
&usb2phy_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
};
|
||||
|
||||
&usb_drd_dwc3 {
|
||||
extcon = <&usb2phy>;
|
||||
phys = <&usb2phy_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
maximum-speed = "high-speed";
|
||||
snps,dis_u2_susphy_quirk;
|
||||
snps,usb2-lpm-disable;
|
||||
snps,usb2-gadget-lpm-disable;
|
||||
};
|
||||
Reference in New Issue
Block a user