mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-07 19:30:30 +09:00
ARM: dts: rockchip: add rv1126-bat-evb-v10.dts
Signed-off-by: Fenrir Lin <fenrir.lin@rock-chips.com> Change-Id: I4762d2796454c0f4b0f02620d78e2cb6cc6f9339
This commit is contained in:
Fenrir Lin
@@ -854,6 +854,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
||||
rv1126-ai-cam-ddr3-v1.dtb \
|
||||
rv1126-ai-cam-ddr3-v1-spi-nand.dtb \
|
||||
rv1126-ai-cam-plus.dtb \
|
||||
rv1126-bat-evb-v10.dtb \
|
||||
rv1126-bat-ipc-v10.dtb \
|
||||
rv1126-bat-ipc-4k-v10.dtb \
|
||||
rv1126-evb-ddr3-v10.dtb \
|
||||
|
||||
420
arch/arm/boot/dts/rv1126-bat-evb-v10.dts
Normal file
420
arch/arm/boot/dts/rv1126-bat-evb-v10.dts
Normal file
@@ -0,0 +1,420 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rv1126.dtsi"
|
||||
#include "rv1126-bat-ipc.dtsi"
|
||||
#include "rv1126-thunder-boot-emmc.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Rockchip RV1126 BAT EVB V10 Board";
|
||||
compatible = "rockchip,rv1126-bat-evb-v10", "rockchip,rv1126";
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
poll-interval = <100>;
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
|
||||
recovery {
|
||||
label = "Volum_up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
press-threshold-microvolt = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
cam_ircut0: cam_ircut {
|
||||
status = "okay";
|
||||
compatible = "ap1511a,ircut";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_cut_en>;
|
||||
ircut-open-gpios = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
led-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
rockchip,camera-module-index = <1>;
|
||||
rockchip,camera-module-facing = "front";
|
||||
};
|
||||
|
||||
i2s0_sound: i2s0-sound {
|
||||
status = "okay";
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,name = "rockchip,i2s0-sound";
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0_8ch>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&es8311>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
white {
|
||||
label = "white";
|
||||
pwms = <&pwm2 0 50000 0>;
|
||||
max-brightness = <255>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v2_dvdd: vcc1v8_dovdd: vcc2v8_avdd: vcc-camera {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_camera";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vcc_1v8: vcc-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vccio_flash: vccio-flash {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vccio_flash";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
vccio_sd: vccio-sd {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
states = <3300000 1
|
||||
1800000 0>;
|
||||
};
|
||||
|
||||
vdd_npu_vepu: vdd-npu-vepu {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm1 0 5000 1>;
|
||||
regulator-name = "vdd_npu_vepu";
|
||||
regulator-min-microvolt = <720000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-init-microvolt = <824000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
pwm-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_wake_host>;
|
||||
wifi_chip_type = "cy43438";
|
||||
WIFI,poweren_gpio = <&gpio1 RK_PC7 GPIO_ACTIVE_LOW>;
|
||||
WIFI,host_wake_irq = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&csi_dphy0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
mipi_in_ucam0: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&ucam_out0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
csidphy0_out: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&isp_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
non-removable;
|
||||
mmc-hs200-1_8v;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
supports-emmc;
|
||||
/delete-property/ pinctrl-names;
|
||||
/delete-property/ pinctrl-0;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
hym8563: hym8563@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
os04c10: os04c10@36 {
|
||||
compatible = "ovti,os04c10";
|
||||
reg = <0x36>;
|
||||
clocks = <&cru CLK_MIPICSI_OUT>;
|
||||
clock-names = "xvclk";
|
||||
power-domains = <&power RV1126_PD_VI>;
|
||||
avdd-supply = <&vcc2v8_avdd>;
|
||||
dovdd-supply = <&vcc1v8_dovdd>;
|
||||
dvdd-supply = <&vcc1v2_dvdd>;
|
||||
pwdn-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
rockchip,camera-module-index = <1>;
|
||||
rockchip,camera-module-facing = "front";
|
||||
rockchip,camera-module-name = "default";
|
||||
rockchip,camera-module-lens-name = "default";
|
||||
ir-cut = <&cam_ircut0>;
|
||||
|
||||
port {
|
||||
ucam_out0: endpoint {
|
||||
remote-endpoint = <&mipi_in_ucam0>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
opt3001: opt3001@44 {
|
||||
compatible = "ti,opt3001";
|
||||
reg = <0x44>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-0 = <&i2c4m1_xfer>;
|
||||
|
||||
es8311: es8311@18 {
|
||||
compatible = "everest,es8311";
|
||||
reg = <0x18>;
|
||||
clocks = <&cru MCLK_I2S0_TX_OUT2IO>;
|
||||
clock-names = "mclk";
|
||||
adc-pga-gain = <6>; /* 18dB */
|
||||
adc-volume = <0xbf>; /* 0dB */
|
||||
dac-volume = <0xbf>; /* 0dB */
|
||||
aec-mode = "dac left, adc right";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0m0_mclk &spk_ctl>;
|
||||
assigned-clocks = <&cru MCLK_I2S0_TX_OUT2IO>;
|
||||
assigned-clock-parents = <&cru MCLK_I2S0_TX>;
|
||||
spk-ctl-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c5m0_xfer>;
|
||||
|
||||
CW2015@62 {
|
||||
compatible = "cw201x";
|
||||
reg = <0x62>;
|
||||
bat_config_info = <0x15 0x7E 0x7A 0x6E 0x6A 0x67 0x63 0x62 0x62 0x61 0x5E
|
||||
0x59 0x56 0x57 0x51 0x3C 0x30 0x27 0x29 0x29 0x2E 0x3A
|
||||
0x49 0x57 0x64 0x57 0x0B 0x85 0x30 0x50 0x60 0x67 0x6A
|
||||
0x6C 0x6A 0x6C 0x39 0x14 0x64 0x0E 0x04 0x2A 0x4E 0x81
|
||||
0x8E 0x90 0x90 0x43 0x64 0x83 0x96 0xA5 0x80 0x86 0xAC
|
||||
0xCB 0x2F 0x00 0x64 0xA5 0xB5 0x00 0xF8 0x31>;
|
||||
monitor_sec = <5>;
|
||||
virtual_power = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
#sound-dai-cells = <0>;
|
||||
rockchip,clk-trcm = <1>;
|
||||
rockchip,i2s-rx-route = <0 1 2 3>;
|
||||
pinctrl-0 = <&i2s0m0_sclk_tx
|
||||
&i2s0m0_lrck_tx
|
||||
&i2s0m0_sdo0
|
||||
&i2s0m0_sdi0>;
|
||||
};
|
||||
|
||||
&isp_reserved {
|
||||
size = <0x02400000>;
|
||||
};
|
||||
|
||||
&npu {
|
||||
npu-supply = <&vdd_npu_vepu>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
es8311 {
|
||||
spk_ctl: spk-ctl {
|
||||
rockchip,pins = <2 RK_PA4 0 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
ir-cut {
|
||||
/omit-if-no-ref/
|
||||
ir_cut_en: ir-cut-en {
|
||||
rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_output_low>;
|
||||
};
|
||||
};
|
||||
wireless-wlan {
|
||||
/omit-if-no-ref/
|
||||
wifi_wake_host: wifi-wake-host {
|
||||
rockchip,pins = <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
|
||||
pmuio0-supply = <&vcc_3v3>;
|
||||
pmuio1-supply = <&vcc_3v3>;
|
||||
vccio2-supply = <&vccio_sd>;
|
||||
vccio3-supply = <&vcc_1v8>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "active";
|
||||
pinctrl-0 = <&pwm1m0_pins_pull_down>;
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "active";
|
||||
pinctrl-0 = <&pwm2m1_pins_pull_down>;
|
||||
};
|
||||
|
||||
&pwm3 {
|
||||
status = "okay";
|
||||
pinctrl-names = "active";
|
||||
pinctrl-0 = <&pwm3m1_pins_pull_down>;
|
||||
};
|
||||
|
||||
&rkisp_thunderboot {
|
||||
reg = <0x08000000 (32 * 0x00100000)>;
|
||||
};
|
||||
|
||||
&rkisp_vir0 {
|
||||
ports {
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
isp_in: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&csidphy0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rkisp_vir1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkispp_vir1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rkvenc {
|
||||
venc-supply = <&vdd_npu_vepu>;
|
||||
};
|
||||
|
||||
&rkvenc_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mpp_srv {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rockchip_suspend {
|
||||
status = "okay";
|
||||
rockchip,sleep-debug-en = <1>;
|
||||
rockchip,sleep-mode-config = <
|
||||
(0
|
||||
| RKPM_SLP_ARMOFF
|
||||
| RKPM_SLP_PMU_PMUALIVE_32K
|
||||
| RKPM_SLP_PMU_DIS_OSC
|
||||
)
|
||||
>;
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&sdio {
|
||||
max-frequency = <50000000>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
supports-sdio;
|
||||
supports-chip-alive;
|
||||
logic-remove-card;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
card-detect-delay = <200>;
|
||||
rockchip,default-sample-phase = <90>;
|
||||
supports-sd;
|
||||
sd-uhs-sdr12;
|
||||
sd-uhs-sdr25;
|
||||
sd-uhs-sdr104;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
vup-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart5m2_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user