mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-08 03:40:35 +09:00
arm: dts: rockchip: add dot rk816 v10 dts for rk3308
Change-Id: I976950bc059d23ffc1f581b8821da47afa8079f5 Signed-off-by: Lin Jianhua <linjh@rock-chips.com>
This commit is contained in:
Lin Jianhua
@@ -567,6 +567,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
||||
rk3288-veyron-speedy.dtb \
|
||||
rk3288-x7811-rk818-dual-dsi.dtb \
|
||||
rk3308-dot-v10-aarch32.dtb \
|
||||
rk3308-dot-rk816-v10-aarch32.dtb \
|
||||
rk3308-evb-dmic-i2s-v10-aarch32.dtb \
|
||||
rk3308-voice-module-board-v10-aarch32.dtb \
|
||||
rk3308-voice-module-amic-mainboard-v10-aarch32.dtb \
|
||||
|
||||
488
arch/arm/boot/dts/rk3308-dot-rk816-v10-aarch32.dts
Normal file
488
arch/arm/boot/dts/rk3308-dot-rk816-v10-aarch32.dts
Normal file
@@ -0,0 +1,488 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "arm64/rockchip/rk3308.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3308 Dot Rk816-3 V10 (AArch32)";
|
||||
compatible = "rockchip,rk3308-dot-rk816-v10-aarch32", "rockchip,rk3308";
|
||||
|
||||
chosen {
|
||||
bootargs = "earlycon=uart8250,mmio32,0xff0c0000 swiotlb=1 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootfstype=squashfs rootwait";
|
||||
};
|
||||
|
||||
acodec_sound: acodec-sound {
|
||||
compatible = "rockchip,multicodecs-card";
|
||||
rockchip,card-name = "rockchip,rk3308-acodec";
|
||||
rockchip,codec-hp-det;
|
||||
rockchip,mclk-fs = <256>;
|
||||
rockchip,cpu = <&i2s_8ch_2>;
|
||||
rockchip,codec = <&acodec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
poll-interval = <100>;
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
|
||||
esc-key {
|
||||
linux,code = <KEY_MICMUTE>;
|
||||
label = "micmute";
|
||||
press-threshold-microvolt = <1130000>;
|
||||
};
|
||||
|
||||
menu-key {
|
||||
linux,code = <KEY_PLAY>;
|
||||
label = "play";
|
||||
press-threshold-microvolt = <624000>;
|
||||
};
|
||||
|
||||
vol-down-key {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
label = "volume down";
|
||||
press-threshold-microvolt = <300000>;
|
||||
};
|
||||
|
||||
vol-up-key {
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
label = "volume up";
|
||||
press-threshold-microvolt = <18000>;
|
||||
};
|
||||
};
|
||||
|
||||
dummy_codec: dummy-codec {
|
||||
compatible = "rockchip,dummy-codec";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
status = "okay";
|
||||
compatible = "gpio-leds";
|
||||
|
||||
red-led {
|
||||
gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
label = "redled";
|
||||
default-state = "off";
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
green-led {
|
||||
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
label = "greenled";
|
||||
default-state = "off";
|
||||
linux,default-trigger = "default-off";
|
||||
};
|
||||
|
||||
blue-led {
|
||||
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
label = "blueled";
|
||||
default-state = "on";
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
pcm_codec: pcm-codec {
|
||||
compatible = "delta,dfbmcs320";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sound_pcm {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "dsp_b";
|
||||
simple-audio-card,name = "rockchip,rk3308-pcm";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s_2ch_0>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&pcm_codec>;
|
||||
};
|
||||
};
|
||||
|
||||
vad-sound {
|
||||
status = "disabled";
|
||||
compatible = "rockchip,multicodecs-card";
|
||||
rockchip,card-name = "rockchip,rk3308-vad";
|
||||
rockchip,codec-hp-det;
|
||||
rockchip,cpu = <&i2s_8ch_2>;
|
||||
rockchip,codec = <&acodec>, <&vad>;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-min-microvolt = <4000000>;
|
||||
regulator-max-microvolt = <4000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
uart_rts_gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart4_rts>;
|
||||
pinctrl-1 = <&uart4_rts_gpio>;
|
||||
BT,power_gpio = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
clocks = <&cru SCLK_WIFI>;
|
||||
clock-names = "clk_wifi";
|
||||
ref-clock-frequency = <24000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_wake_host>;
|
||||
wifi_chip_type = "rtl8723ds";
|
||||
WIFI,host_wake_irq = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
rk816: pmic@1a {
|
||||
status = "okay";
|
||||
compatible = "rockchip,rk816";
|
||||
reg = <0x1a>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk816-clkout1", "rk816-clkout2";
|
||||
extcon = <&u2phy>;
|
||||
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc5-supply = <&vcc_io>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
|
||||
pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gpio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
battery {
|
||||
compatible = "rk816-battery";
|
||||
ocv_table = <3400 3625 3685 3697 3718 3735 3748
|
||||
3760 3774 3788 3802 3816 3834 3853
|
||||
3877 3908 3946 3975 4018 4071 4106>;
|
||||
design_capacity = <5000>;
|
||||
design_qmax = <5200>;
|
||||
bat_res = <100>;
|
||||
max_input_current = <2000>;
|
||||
max_chrg_current = <1300>;
|
||||
max_chrg_voltage = <4200>;
|
||||
sleep_enter_current = <300>;
|
||||
sleep_exit_current = <300>;
|
||||
sleep_filter_current = <100>;
|
||||
power_off_thresd = <3400>;
|
||||
zero_algorithm_vol = <3850>;
|
||||
max_soc_offset = <80>;
|
||||
monitor_sec = <5>;
|
||||
virtual_power = <1>;
|
||||
power_dc2otg = <0>;
|
||||
dc_det_adc = <0>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_core: DCDC_REG1{
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log: DCDC_REG2 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <1>;
|
||||
};
|
||||
|
||||
vcc_io: DCDC_REG4 {
|
||||
regulator-name = "vcc_io";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-initial-mode = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_codec: LDO_REG1 {
|
||||
regulator-name = "vcc_1v8_codec";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sdio: vcc_1v8: LDO_REG2 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_10: LDO_REG3 {
|
||||
regulator-name = "vdd_10";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo4: LDO_REG4 {
|
||||
regulator-name = "ldo4";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_3v3: LDO_REG5 {
|
||||
regulator-name = "vccio_3v3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
ldo6: LDO_REG6 {
|
||||
regulator-name = "ldo6";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&acodec {
|
||||
status = "okay";
|
||||
rockchip,no-deep-low-power;
|
||||
rockchip,no-hp-det;
|
||||
rockchip,loopback-grp = <1>;
|
||||
pa-drv-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
rockchip,delay-pa-drv-ms = <5>;
|
||||
spk-ctl-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
/* ADC5-8 for 4ch capture, loopback to ADC3-4 */
|
||||
rockchip,adc-grps-route = <2 3 1 0>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_core>;
|
||||
};
|
||||
|
||||
&cpu0_opp_table {
|
||||
opp-1200000000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&dmc {
|
||||
center-supply = <&vdd_log>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fiq_debugger {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s_2ch_0 {
|
||||
status = "okay";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
&i2s_8ch_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
vccio0-supply = <&vcc_io>;
|
||||
vccio1-supply = <&vcc_io>;
|
||||
vccio2-supply = <&vcc_io>;
|
||||
vccio3-supply = <&vcc_io>;
|
||||
vccio4-supply = <&vccio_sdio>;
|
||||
vccio5-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
&nandc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
wifi_wake_host: wifi-wake-host {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<0 6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ramoops_mem {
|
||||
reg = <0x0 0x30000 0x0 0x20000>;
|
||||
};
|
||||
|
||||
&ramoops {
|
||||
record-size = <0x0 0x00000>;
|
||||
console-size = <0x0 0x20000>;
|
||||
};
|
||||
|
||||
&rockchip_suspend {
|
||||
rockchip,sleep-mode-config = <
|
||||
(0
|
||||
| RKPM_ARMOFF
|
||||
| RKPM_PMU_HW_PLLS_PD
|
||||
| RKPM_DBG_FSM_SOUT
|
||||
)
|
||||
>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&sdio {
|
||||
max-frequency = <110000000>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
supports-sdio;
|
||||
ignore-pm-notify;
|
||||
keep-power-in-suspend;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
u2phy_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_xfer &uart4_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vad {
|
||||
status = "disabled";
|
||||
rockchip,audio-src = <&i2s_8ch_2>;
|
||||
rockchip,det-channel = <0>;
|
||||
rockchip,mode = <1>;
|
||||
rockchip,buffer-time-ms = <500>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
Reference in New Issue
Block a user