staging: brcm80211: renamed files in brcmsmac and include directories

Code cleanup.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmfmac/bcmsdh.c

@@ -19,13 +19,13 @@
 #include <linux/netdevice.h>
 #include <linux/pci_ids.h>
 #include <linux/sched.h>
-#include <bcmdefs.h>
-#include <bcmdevs.h>
+#include <defs.h>
+#include <brcm_hw_ids.h>
 #include <brcmu_utils.h>
 #include <brcmu_wifi.h>
-#include <bcmsoc.h>
+#include <soc.h>
 
-#include <bcmsdh.h>		/* BRCM API for SDIO
+#include <sdio_host.h>		/* BRCM API for SDIO
 			 clients (such as wl, dhd) */
 #include <bcmsdbus.h>		/* common SDIO/controller interface */
 #include <sbsdio.h>		/* BRCM sdio device core */

drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c

@@ -25,10 +25,10 @@
 #include <linux/completion.h>
 #include <linux/sched.h>
 
-#include <bcmdefs.h>
-#include <bcmdevs.h>
+#include <defs.h>
+#include <brcm_hw_ids.h>
 #include <brcmu_utils.h>
-#include <bcmsdh.h>
+#include <sdio_host.h>
 #include <brcmu_wifi.h>
 
 #if defined(OOB_INTR_ONLY)

drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c

@@ -16,11 +16,11 @@
 #include <linux/types.h>
 #include <linux/netdevice.h>
 #include <linux/mmc/sdio.h>
-#include <bcmdefs.h>
-#include <bcmdevs.h>
+#include <defs.h>
+#include <brcm_hw_ids.h>
 #include <brcmu_utils.h>
 #include <brcmu_wifi.h>
-#include <bcmsdh.h>
+#include <sdio_host.h>
 #include <bcmsdbus.h>		/* bcmsdh to/from specific controller APIs */
 #include <sdiovar.h>		/* ioctl/iovars */
 

drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c

@@ -17,10 +17,10 @@
 #include <linux/sched.h>	/* request_irq() */
 #include <linux/netdevice.h>
 #include <net/cfg80211.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_utils.h>
 #include <brcmu_wifi.h>
-#include <bcmsdh.h>
+#include <sdio_host.h>
 #include <bcmsdbus.h>		/* bcmsdh to/from specific controller APIs */
 #include <sdiovar.h>		/* to get msglevel bit values */
 

drivers/staging/brcm80211/brcmfmac/dhd_cdc.c

@@ -17,7 +17,7 @@
 #include <linux/types.h>
 #include <linux/netdevice.h>
 #include <linux/sched.h>
-#include <bcmdefs.h>
+#include <defs.h>
 
 #include <brcmu_utils.h>
 #include <brcmu_wifi.h>

drivers/staging/brcm80211/brcmfmac/dhd_common.c

@@ -16,7 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/sched.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_wifi.h>
 #include <linux/netdevice.h>
 #include <asm/unaligned.h>

drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c

@@ -17,7 +17,7 @@
 #include <linux/netdevice.h>
 #include <linux/sched.h>
 #include <brcmu_utils.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_wifi.h>
 
 #include <dngl_stats.h>

drivers/staging/brcm80211/brcmfmac/dhd_linux.c

@@ -32,7 +32,7 @@
 #include <linux/fs.h>
 #include <linux/uaccess.h>
 #include <net/cfg80211.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_utils.h>
 #include <brcmu_wifi.h>
 

drivers/staging/brcm80211/brcmfmac/dhd_sdio.c

@@ -22,15 +22,15 @@
 #include <linux/sched.h>
 #include <linux/mmc/sdio.h>
 #include <asm/unaligned.h>
-#include <bcmdefs.h>
-#include <bcmsdh.h>
+#include <defs.h>
+#include <sdio_host.h>
 
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_wifi.h>
 #include <brcmu_utils.h>
-#include <bcmdevs.h>
+#include <brcm_hw_ids.h>
 
-#include <bcmsoc.h>
+#include <soc.h>
 
 /* register access macros */
 #ifndef __BIG_ENDIAN

drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c

@@ -19,7 +19,7 @@
 #include <linux/sched.h>
 
 #include <brcmu_utils.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_wifi.h>
 
 #include <asm/uaccess.h>

drivers/staging/brcm80211/brcmfmac/wl_iw.c

@@ -16,7 +16,7 @@
 
 #include <linux/kthread.h>
 #include <linux/semaphore.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/wireless.h>

drivers/staging/brcm80211/brcmsmac/Makefile

@@ -28,27 +28,27 @@ ccflags-y :=				\
 	-Idrivers/staging/brcm80211/include
 
 BRCMSMAC_OFILES := \
-	brcms_mac80211.o \
+	mac80211_if.o \
 	ucode_loader.o \
-	wlc_alloc.o \
-	wlc_ampdu.o \
-	wlc_antsel.o \
-	wlc_bmac.o \
-	wlc_channel.o \
-	wlc_main.o \
-	wlc_phy_shim.o \
-	wlc_pmu.o \
-	wlc_rate.o \
-	wlc_stf.o \
+	alloc.o \
+	ampdu.o \
+	antsel.o \
+	bottom_mac.o \
+	channel.o \
+	main.o \
+	phy_shim.o \
+	pmu.o \
+	rate.o \
+	stf.o \
 	aiutils.o \
-	phy/wlc_phy_cmn.o \
-	phy/wlc_phy_lcn.o \
-	phy/wlc_phy_n.o \
-	phy/wlc_phytbl_lcn.o \
-	phy/wlc_phytbl_n.o \
-	phy/wlc_phy_qmath.o \
-	bcmotp.o \
-	bcmsrom.o \
+	phy/phy_cmn.o \
+	phy/phy_lcn.o \
+	phy/phy_n.o \
+	phy/phytbl_lcn.o \
+	phy/phytbl_n.o \
+	phy/phy_qmath.o \
+	otp.o \
+	srom.o \
 	dma.o \
 	nicpci.o
 

drivers/staging/brcm80211/brcmsmac/aiutils.c

@@ -17,22 +17,22 @@
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <bcmdefs.h>
-#include "wlc_types.h"
+#include <defs.h>
+#include "types.h"
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <brcmu_utils.h>
 #include <aiutils.h>
-#include <bcmsoc.h>
+#include <soc.h>
 #include <chipcommon.h>
-#include <bcmdevs.h>
+#include <brcm_hw_ids.h>
 
 /* ********** from siutils.c *********** */
 #include <nicpci.h>
-#include <bcmsrom.h>
-#include <wlc_pmu.h>
-#include <wlc_scb.h>
-#include <wlc_pub.h>
+#include <srom.h>
+#include <pmu.h>
+#include <scb.h>
+#include <pub.h>
 
 /* slow_clk_ctl */
 #define SCC_SS_MASK		0x00000007	/* slow clock source mask */

drivers/staging/brcm80211/brcmsmac/alloc.c

@@ -16,23 +16,23 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_utils.h>
 #include <aiutils.h>
-#include "bcmdma.h"
+#include "dma.h"
 
 #include "d11.h"
-#include "wlc_types.h"
-#include "wlc_cfg.h"
-#include "wlc_scb.h"
-#include "wlc_pub.h"
-#include "wlc_key.h"
-#include "wlc_alloc.h"
-#include "wlc_rate.h"
-#include "wlc_bsscfg.h"
-#include "phy/wlc_phy_hal.h"
-#include "wlc_channel.h"
-#include "wlc_main.h"
+#include "types.h"
+#include "cfg.h"
+#include "scb.h"
+#include "pub.h"
+#include "key.h"
+#include "alloc.h"
+#include "rate.h"
+#include "bsscfg.h"
+#include "phy/phy_hal.h"
+#include "channel.h"
+#include "main.h"
 
 static struct wlc_bsscfg *wlc_bsscfg_malloc(uint unit);
 static void wlc_bsscfg_mfree(struct wlc_bsscfg *cfg);

drivers/staging/brcm80211/brcmsmac/ampdu.c

@@ -16,24 +16,23 @@
 #include <linux/kernel.h>
 #include <net/mac80211.h>
 
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_utils.h>
 #include <aiutils.h>
-#include "bcmdma.h"
-#include <bcmdma.h>
+#include "dma.h"
 #include <d11.h>
 
-#include "wlc_types.h"
-#include "wlc_cfg.h"
-#include "wlc_rate.h"
-#include "wlc_scb.h"
-#include "wlc_pub.h"
-#include "wlc_key.h"
-#include "phy/wlc_phy_hal.h"
-#include "wlc_antsel.h"
-#include "wlc_channel.h"
-#include "wlc_main.h"
-#include "wlc_ampdu.h"
+#include "types.h"
+#include "cfg.h"
+#include "rate.h"
+#include "scb.h"
+#include "pub.h"
+#include "key.h"
+#include "phy/phy_hal.h"
+#include "antsel.h"
+#include "channel.h"
+#include "main.h"
+#include "ampdu.h"
 
 #define AMPDU_MAX_MPDU		32	/* max number of mpdus in an ampdu */
 #define AMPDU_NUM_MPDU_LEGACY	16	/* max number of mpdus in an ampdu to a legacy */

drivers/staging/brcm80211/brcmsmac/antsel.c

@@ -14,28 +14,28 @@
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include <wlc_cfg.h>
+#include <cfg.h>
 
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_utils.h>
 #include <aiutils.h>
-#include <bcmdevs.h>
-#include "bcmdma.h"
+#include <brcm_hw_ids.h>
+#include "dma.h"
 
 #include "d11.h"
-#include "wlc_rate.h"
-#include "wlc_key.h"
-#include "wlc_scb.h"
-#include "wlc_pub.h"
-#include "phy/wlc_phy_hal.h"
-#include "wlc_bmac.h"
-#include "wlc_channel.h"
-#include "wlc_main.h"
-#include "wlc_antsel.h"
+#include "rate.h"
+#include "key.h"
+#include "scb.h"
+#include "pub.h"
+#include "phy/phy_hal.h"
+#include "bottom_mac.h"
+#include "channel.h"
+#include "main.h"
+#include "antsel.h"
 
 #define ANT_SELCFG_AUTO		0x80	/* bit indicates antenna sel AUTO */
 #define ANT_SELCFG_MASK		0x33	/* antenna configuration mask */

drivers/staging/brcm80211/brcmsmac/bottom_mac.c

@@ -21,33 +21,33 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 
-#include <bcmdefs.h>
-#include <bcmdevs.h>
+#include <defs.h>
+#include <brcm_hw_ids.h>
 #include <brcmu_wifi.h>
 #include <aiutils.h>
-#include <bcmsrom.h>
-#include <bcmotp.h>
+#include <srom.h>
+#include "otp.h"
 #include <brcmu_utils.h>
 #include <chipcommon.h>
 #include <nicpci.h>
-#include <bcmdma.h>
+#include "dma.h"
 
-#include "wlc_types.h"
-#include "wlc_pmu.h"
+#include "types.h"
+#include "pmu.h"
 #include "d11.h"
-#include "wlc_cfg.h"
-#include "wlc_rate.h"
-#include "wlc_scb.h"
-#include "wlc_pub.h"
-#include "wlc_key.h"
-#include "phy/wlc_phy_hal.h"
-#include "wlc_channel.h"
-#include "wlc_main.h"
+#include "cfg.h"
+#include "rate.h"
+#include "scb.h"
+#include "pub.h"
+#include "key.h"
+#include "phy/phy_hal.h"
+#include "channel.h"
+#include "main.h"
 #include "ucode_loader.h"
-#include "wlc_antsel.h"
-#include "wlc_alloc.h"
-#include "wlc_bmac.h"
-#include "brcms_mac80211.h"
+#include "antsel.h"
+#include "alloc.h"
+#include "bottom_mac.h"
+#include "mac80211_if.h"
 
 #define	TIMER_INTERVAL_WATCHDOG_BMAC	1000	/* watchdog timer, in unit of ms */
 

drivers/staging/brcm80211/brcmsmac/bottom_mac.h

@@ -16,17 +16,6 @@
 #ifndef _BRCM_BOTTOM_MAC_H_
 #define _BRCM_BOTTOM_MAC_H_
 
-/* XXXXX this interface is under wlc.c by design
- * http://hwnbu-twiki.broadcom.com/bin/view/Mwgroup/WlBmacDesign
- *
- *        high driver files(e.g. wlc_ampdu.c etc)
- *             wlc.h/wlc.c
- *         wlc_bmac.h/wlc_bmac.c
- *
- *  So don't include this in files other than wlc.c, wlc_bmac* wl_rte.c(dongle port) and wl_phy.c
- *  create wrappers in wlc.c if needed
- */
-
 /* dup state between BMAC(struct wlc_hw_info) and HIGH(struct wlc_info)
    driver */
 typedef struct wlc_bmac_state {

drivers/staging/brcm80211/brcmsmac/channel.c

@@ -19,23 +19,23 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_utils.h>
 #include <aiutils.h>
-#include "bcmdma.h"
+#include "dma.h"
 
-#include "wlc_types.h"
+#include "types.h"
 #include "d11.h"
-#include "wlc_cfg.h"
-#include "wlc_scb.h"
-#include "wlc_pub.h"
-#include "wlc_key.h"
-#include "phy/wlc_phy_hal.h"
-#include "wlc_bmac.h"
-#include "wlc_rate.h"
-#include "wlc_channel.h"
-#include "wlc_main.h"
-#include "wlc_stf.h"
+#include "cfg.h"
+#include "scb.h"
+#include "pub.h"
+#include "key.h"
+#include "phy/phy_hal.h"
+#include "bottom_mac.h"
+#include "rate.h"
+#include "channel.h"
+#include "main.h"
+#include "stf.h"
 
 #define	VALID_CHANNEL20_DB(wlc, val) wlc_valid_channel20_db((wlc)->cmi, val)
 #define	VALID_CHANNEL20_IN_BAND(wlc, bandunit, val) \

drivers/staging/brcm80211/brcmsmac/dma.c

@@ -18,15 +18,14 @@
 #include <linux/string.h>
 #include <linux/netdevice.h>
 #include <linux/pci.h>
-#include <bcmdefs.h>
-#include <bcmdevs.h>
-#include <bcmsoc.h>
+#include <defs.h>
+#include <brcm_hw_ids.h>
+#include <soc.h>
 #include <brcmu_utils.h>
 #include <aiutils.h>
 
-#include "wlc_types.h"
-#include "bcmdma.h"
-#include <bcmdma.h>
+#include "types.h"
+#include "dma.h"
 
 #if defined(__mips__)
 #include <asm/addrspace.h>

drivers/staging/brcm80211/brcmsmac/dma.h

@@ -17,7 +17,7 @@
 #ifndef	_BRCM_DMA_H_
 #define	_BRCM_DMA_H_
 
-#include "wlc_types.h"		/* forward structure declarations */
+#include "types.h"		/* forward structure declarations */
 
 #ifndef _dma_pub_
 #define _dma_pub_

drivers/staging/brcm80211/brcmsmac/mac80211_if.c

@@ -25,22 +25,22 @@
 #include <linux/sched.h>
 #include <linux/firmware.h>
 #include <net/mac80211.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_wifi.h>
 #include <brcmu_utils.h>
 #include <nicpci.h>
-#include "bcmdma.h"
+#include "dma.h"
 
-#include "phy/wlc_phy_int.h"
+#include "phy/phy_int.h"
 #include "d11.h"
-#include "wlc_types.h"
-#include "wlc_cfg.h"
-#include "wlc_key.h"
-#include "wlc_channel.h"
-#include "wlc_scb.h"
-#include "wlc_pub.h"
+#include "types.h"
+#include "cfg.h"
+#include "key.h"
+#include "channel.h"
+#include "scb.h"
+#include "pub.h"
 #include "ucode_loader.h"
-#include "brcms_mac80211.h"
+#include "mac80211_if.h"
 
 #define N_TX_QUEUES	4 /* #tx queues on mac80211<->driver interface */
 

drivers/staging/brcm80211/brcmsmac/main.c

@@ -19,34 +19,33 @@
 #include <linux/pci_ids.h>
 #include <net/mac80211.h>
 
-#include <bcmdefs.h>
-#include <bcmdevs.h>
+#include <defs.h>
+#include <brcm_hw_ids.h>
 #include <brcmu_utils.h>
 #include <brcmu_wifi.h>
 #include <aiutils.h>
-#include <bcmsrom.h>
-#include "bcmdma.h"
-#include <bcmdma.h>
+#include <srom.h>
+#include "dma.h"
 
-#include "wlc_pmu.h"
+#include "pmu.h"
 #include "d11.h"
-#include "wlc_types.h"
-#include "wlc_cfg.h"
-#include "wlc_rate.h"
-#include "wlc_scb.h"
-#include "wlc_pub.h"
-#include "wlc_key.h"
-#include "wlc_bsscfg.h"
-#include "phy/wlc_phy_hal.h"
-#include "wlc_channel.h"
-#include "wlc_main.h"
-#include "wlc_bmac.h"
-#include "wlc_phy_hal.h"
-#include "wlc_antsel.h"
-#include "wlc_stf.h"
-#include "wlc_ampdu.h"
-#include "wlc_alloc.h"
-#include "brcms_mac80211.h"
+#include "types.h"
+#include "cfg.h"
+#include "rate.h"
+#include "scb.h"
+#include "pub.h"
+#include "key.h"
+#include "bsscfg.h"
+#include "phy/phy_hal.h"
+#include "channel.h"
+#include "main.h"
+#include "bottom_mac.h"
+#include "phy_hal.h"
+#include "antsel.h"
+#include "stf.h"
+#include "ampdu.h"
+#include "alloc.h"
+#include "mac80211_if.h"
 
 /*
  * WPA(2) definitions

drivers/staging/brcm80211/brcmsmac/main.h

@@ -166,7 +166,7 @@ extern const u8 prio2fifo[];
 #define	MAXTXFRAMEBURST		8	/* vanilla xpress mode: max frames/burst */
 #define	MAXFRAMEBURST_TXOP	10000	/* Frameburst TXOP in usec */
 
-/* Per-AC retry limit register definitions; uses bcmdefs.h bitfield macros */
+/* Per-AC retry limit register definitions; uses defs.h bitfield macros */
 #define EDCF_SHORT_S            0
 #define EDCF_SFB_S              4
 #define EDCF_LONG_S             8

drivers/staging/brcm80211/brcmsmac/nicpci.c

@@ -17,15 +17,15 @@
 #include <linux/delay.h>
 #include <linux/string.h>
 #include <linux/pci.h>
-#include <bcmdefs.h>
-#include "wlc_types.h"
+#include <defs.h>
+#include "types.h"
 #include <brcmu_utils.h>
 #include <aiutils.h>
-#include <bcmsoc.h>
-#include <bcmdevs.h>
+#include <soc.h>
+#include <brcm_hw_ids.h>
 #include <chipcommon.h>
-#include <wlc_scb.h>
-#include <wlc_pub.h>
+#include <scb.h>
+#include <pub.h>
 #include <nicpci.h>
 
 /* SPROM offsets */

drivers/staging/brcm80211/brcmsmac/otp.c

@@ -21,14 +21,14 @@
 #include <linux/pci.h>
 #include <linux/crc-ccitt.h>
 
-#include <bcmdefs.h>
-#include <bcmdevs.h>
-#include "wlc_types.h"
+#include <defs.h>
+#include <brcm_hw_ids.h>
+#include "types.h"
 #include <brcmu_utils.h>
 #include <aiutils.h>
-#include <bcmsoc.h>
+#include <soc.h>
 #include <chipcommon.h>
-#include <bcmotp.h>
+#include "otp.h"
 
 #define OTPS_GUP_MASK		0x00000f00
 #define OTPS_GUP_SHIFT		8

drivers/staging/brcm80211/brcmsmac/phy/phy_cmn.c

@@ -14,7 +14,7 @@
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include <wlc_cfg.h>
+#include <cfg.h>
 
 #include <linux/kernel.h>
 #include <linux/string.h>
@@ -23,16 +23,16 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 
-#include <bcmdefs.h>
+#include <defs.h>
 #include <chipcommon.h>
-#include <bcmdevs.h>
-#include "bcmdma.h"
+#include <brcm_hw_ids.h>
+#include <dma.h>
 
-#include <wlc_types.h>
-#include <wlc_phy_int.h>
-#include <wlc_phyreg_n.h>
-#include <wlc_phy_radio.h>
-#include <wlc_phy_lcn.h>
+#include <types.h>
+#include <phy_int.h>
+#include <phyreg_n.h>
+#include <phy_radio.h>
+#include <phy_lcn.h>
 
 u32 phyhal_msg_level = PHYHAL_ERROR;
 

drivers/staging/brcm80211/brcmsmac/phy/phy_hal.h

@@ -23,7 +23,7 @@
 
 #include <aiutils.h>
 #include <d11.h>
-#include <wlc_phy_shim.h>
+#include <phy_shim.h>
 #include <net/mac80211.h>	/* struct wiphy */
 #include "brcmu_wifi.h"		/* chanspec_t */
 

drivers/staging/brcm80211/brcmsmac/phy/phy_int.h

@@ -18,10 +18,10 @@
 #define _BRCM_PHY_INT_H_
 
 #include <linux/kernel.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_utils.h>
 
-#include <wlc_phy_hal.h>
+#include <phy_hal.h>
 
 #define	PHY_VERSION			{ 1, 82, 8, 0 }
 

drivers/staging/brcm80211/brcmsmac/phy/phy_lcn.c

@@ -18,22 +18,22 @@
 #include <linux/string.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
-#include <wlc_cfg.h>
+#include <cfg.h>
 #include <linux/pci.h>
 #include <brcmu_utils.h>
 #include <aiutils.h>
-#include <wlc_pmu.h>
-#include <wlc_scb.h>
-#include <wlc_pub.h>
+#include <pmu.h>
+#include <scb.h>
+#include <pub.h>
 
-#include <bcmdevs.h>
-#include "bcmdma.h"
+#include <brcm_hw_ids.h>
+#include <dma.h>
 
-#include "wlc_phy_radio.h"
-#include "wlc_phy_int.h"
-#include "wlc_phy_qmath.h"
-#include "wlc_phy_lcn.h"
-#include "wlc_phytbl_lcn.h"
+#include "phy_radio.h"
+#include "phy_int.h"
+#include "phy_qmath.h"
+#include "phy_lcn.h"
+#include "phytbl_lcn.h"
 
 #define PLL_2064_NDIV		90
 #define PLL_2064_LOW_END_VCO 	3000

drivers/staging/brcm80211/brcmsmac/phy/phy_n.c

@@ -16,22 +16,22 @@
 
 #include <linux/kernel.h>
 #include <linux/string.h>
-#include <bcmdefs.h>
-#include <wlc_cfg.h>
+#include <defs.h>
+#include <cfg.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <aiutils.h>
 #include <chipcommon.h>
-#include <wlc_pmu.h>
+#include <pmu.h>
 
-#include <bcmdevs.h>
-#include "bcmdma.h"
+#include <brcm_hw_ids.h>
+#include <dma.h>
 
-#include <wlc_types.h>
-#include <wlc_phy_radio.h>
-#include <wlc_phy_int.h>
-#include <wlc_phyreg_n.h>
-#include <wlc_phytbl_n.h>
+#include <types.h>
+#include <phy_radio.h>
+#include <phy_int.h>
+#include <phyreg_n.h>
+#include <phytbl_n.h>
 
 #define	READ_RADIO_REG2(pi, radio_type, jspace, core, reg_name) \
 	read_radio_reg(pi, radio_type##_##jspace##_##reg_name | \

drivers/staging/brcm80211/brcmsmac/phy/phy_qmath.c

@@ -16,7 +16,7 @@
 
 #include <linux/types.h>
 
-#include "wlc_phy_qmath.h"
+#include "phy_qmath.h"
 
 /*
 Description: This function make 16 bit unsigned multiplication. To fit the output into

drivers/staging/brcm80211/brcmsmac/phy/phytbl_lcn.c

@@ -15,9 +15,9 @@
  */
 
 #include <linux/types.h>
-#include "bcmdma.h"
-#include <wlc_phy_int.h>
-#include <wlc_phytbl_lcn.h>
+#include <dma.h>
+#include <phy_int.h>
+#include <phytbl_lcn.h>
 
 const u32 dot11lcn_gain_tbl_rev0[] = {
 	0x00000000,

drivers/staging/brcm80211/brcmsmac/phy/phytbl_n.c

@@ -16,9 +16,9 @@
 
 #include <linux/kernel.h>
 
-#include "bcmdma.h"
-#include <wlc_phy_int.h>
-#include <wlc_phytbl_n.h>
+#include <dma.h>
+#include <phy_int.h>
+#include <phytbl_n.h>
 
 const u32 frame_struct_rev0[] = {
 	0x08004a04,

drivers/staging/brcm80211/brcmsmac/phy_shim.c

@@ -24,29 +24,29 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_utils.h>
 #include <brcmu_wifi.h>
 #include <aiutils.h>
 #include <chipcommon.h>
-#include "bcmdma.h"
-#include <wlc_pmu.h>
+#include "dma.h"
+#include <pmu.h>
 
-#include "wlc_types.h"
-#include "wlc_cfg.h"
+#include "types.h"
+#include "cfg.h"
 #include "d11.h"
-#include "wlc_rate.h"
-#include "wlc_scb.h"
-#include "wlc_pub.h"
-#include "phy/wlc_phy_hal.h"
-#include "wlc_channel.h"
-#include "bcmsrom.h"
-#include "wlc_key.h"
-#include "wlc_bmac.h"
-#include "wlc_phy_hal.h"
-#include "wlc_main.h"
-#include "wlc_phy_shim.h"
-#include "brcms_mac80211.h"
+#include "rate.h"
+#include "scb.h"
+#include "pub.h"
+#include "phy/phy_hal.h"
+#include "channel.h"
+#include <srom.h>
+#include "key.h"
+#include "bottom_mac.h"
+#include "phy_hal.h"
+#include "main.h"
+#include "phy_shim.h"
+#include "mac80211_if.h"
 
 /* PHY SHIM module specific state */
 struct wlc_phy_shim_info {

drivers/staging/brcm80211/brcmsmac/pmu.c

@@ -18,13 +18,13 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <bcmdevs.h>
-#include "wlc_types.h"
+#include <brcm_hw_ids.h>
+#include "types.h"
 #include <chipcommon.h>
 #include <brcmu_utils.h>
-#include "wlc_scb.h"
-#include "wlc_pub.h"
-#include "wlc_pmu.h"
+#include "scb.h"
+#include "pub.h"
+#include "pmu.h"
 
 /*
  * d11 slow to fast clock transition time in slow clock cycles

drivers/staging/brcm80211/brcmsmac/pub.h

@@ -17,7 +17,7 @@
 #ifndef _BRCM_PUB_H_
 #define _BRCM_PUB_H_
 
-#include "wlc_types.h"		/* forward structure declarations */
+#include "types.h"		/* forward structure declarations */
 #include "brcmu_wifi.h"		/* for chanspec_t */
 
 #define	WLC_NUMRATES	16	/* max # of rates in a rateset */

drivers/staging/brcm80211/brcmsmac/rate.c

@@ -16,17 +16,17 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_utils.h>
 #include <aiutils.h>
-#include "bcmdma.h"
+#include "dma.h"
 
-#include "wlc_types.h"
+#include "types.h"
 #include "d11.h"
-#include "wlc_cfg.h"
-#include "wlc_scb.h"
-#include "wlc_pub.h"
-#include "wlc_rate.h"
+#include "cfg.h"
+#include "scb.h"
+#include "pub.h"
+#include "rate.h"
 
 /* Rate info per rate: It tells whether a rate is ofdm or not and its phy_rate value */
 const u8 rate_info[WLC_MAXRATE + 1] = {

drivers/staging/brcm80211/brcmsmac/srom.c

@@ -16,19 +16,19 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/etherdevice.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <stdarg.h>
-#include "wlc_types.h"
+#include "types.h"
 #include <brcmu_utils.h>
-#include <bcmsoc.h>
+#include <soc.h>
 #include <chipcommon.h>
-#include <bcmdevs.h>
+#include <brcm_hw_ids.h>
 #include <nicpci.h>
 #include <aiutils.h>
-#include <bcmsrom.h>
-#include <bcmotp.h>
+#include <srom.h>
+#include "otp.h"
 
 #define SROM_OFFSET(sih) ((sih->ccrev > 31) ? \
 	(((sih->cccaps & CC_CAP_SROM) == 0) ? NULL : \

drivers/staging/brcm80211/brcmsmac/stf.c

@@ -17,24 +17,24 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_utils.h>
 #include <aiutils.h>
 #include <brcmu_wifi.h>
-#include "bcmdma.h"
+#include "dma.h"
 
-#include "wlc_types.h"
+#include "types.h"
 #include "d11.h"
-#include "wlc_cfg.h"
-#include "wlc_rate.h"
-#include "wlc_scb.h"
-#include "wlc_pub.h"
-#include "wlc_key.h"
-#include "phy/wlc_phy_hal.h"
-#include "wlc_channel.h"
-#include "wlc_main.h"
-#include "wlc_bmac.h"
-#include "wlc_stf.h"
+#include "cfg.h"
+#include "rate.h"
+#include "scb.h"
+#include "pub.h"
+#include "key.h"
+#include "phy/phy_hal.h"
+#include "channel.h"
+#include "main.h"
+#include "bottom_mac.h"
+#include "stf.h"
 
 #define MIN_SPATIAL_EXPANSION	0
 #define MAX_SPATIAL_EXPANSION	1

drivers/staging/brcm80211/brcmsmac/types.h

@@ -151,7 +151,7 @@ struct wlc_bsscfg;
 struct brcmu_strbuf;
 struct si_pub;
 
-/* brcm_msg_level is a bit vector with defs in bcmdefs.h */
+/* brcm_msg_level is a bit vector with defs in defs.h */
 extern u32 brcm_msg_level;
 
 #endif				/* _BRCM_TYPES_H_ */

drivers/staging/brcm80211/brcmsmac/ucode_loader.c

@@ -15,7 +15,7 @@
  */
 
 #include <linux/types.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <ucode_loader.h>
 
 enum {

drivers/staging/brcm80211/brcmsmac/ucode_loader.h

@@ -14,7 +14,7 @@
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "wlc_types.h"		/* forward structure declarations */
+#include "types.h"		/* forward structure declarations */
 
 #define MIN_FW_SIZE 40000	/* minimum firmware file size in bytes */
 #define MAX_FW_SIZE 150000

drivers/staging/brcm80211/brcmutil/utils.c

@@ -22,10 +22,10 @@
 #include <linux/netdevice.h>
 #include <linux/sched.h>
 #include <linux/printk.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <stdarg.h>
 #include <brcmu_utils.h>
-#include <bcmdevs.h>
+#include <brcm_hw_ids.h>
 
 MODULE_AUTHOR("Broadcom Corporation");
 MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver utilities.");

drivers/staging/brcm80211/brcmutil/wifi.c

@@ -16,7 +16,7 @@
 #include <linux/ctype.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <bcmdefs.h>
+#include <defs.h>
 #include <brcmu_utils.h>
 #include <brcmu_wifi.h>
 

drivers/staging/brcm80211/include/aidmp.h

@@ -17,7 +17,7 @@
 #ifndef	_AIDMP_H
 #define	_AIDMP_H
 
-#include "bcmdefs.h"		/* for PAD macro */
+#include "defs.h"		/* for PAD macro */
 
 /* Manufacturer Ids */
 #define	MFGID_ARM		0x43b

drivers/staging/brcm80211/include/chipcommon.h

@@ -17,7 +17,7 @@
 #ifndef	_SBCHIPC_H
 #define	_SBCHIPC_H
 
-#include "bcmdefs.h"		/* for PAD macro */
+#include "defs.h"		/* for PAD macro */
 
 typedef volatile struct {
 	u32 chipid;		/* 0x0 */