shinys000114/linux
1
0
Fork 0
mirror of https://github.com/hardkernel/linux.git synced 2026-06-04 02:02:28 +09:00
Code Issues Packages Projects Releases Wiki Activity

can: flexcan: flexcan_chip_start: fix regression, mark one MB for TX and abort pending TX

Browse Source 
commit d5a7b406c5 upstream.

In patch

    0d1862e can: flexcan: fix flexcan_chip_start() on imx6

the loop in flexcan_chip_start() that iterates over all mailboxes after the
soft reset of the CAN core was removed. This loop put all mailboxes (even the
ones marked as reserved 1...7) into EMPTY/INACTIVE mode. On mailboxes 8...63,
this aborts any pending TX messages.

After a cold boot there is random garbage in the mailboxes, which leads to
spontaneous transmit of CAN frames during first activation. Further if the
interface was disabled with a pending message (usually due to an error
condition on the CAN bus), this message is retransmitted after enabling the
interface again.

This patch fixes the regression by:
1) Limiting the maximum number of used mailboxes to 8, 0...7 are used by the RX
FIFO, 8 is used by TX.
2) Marking the TX mailbox as EMPTY/INACTIVE, so that any pending TX of that
mailbox is aborted.

Cc: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Marc Kleine-Budde
2013-10-04 10:52:36 +02:00
committed by Greg Kroah-Hartman
parent e350ff50bc
commit d60241f65b
1 changed files with 8 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/net/can/flexcan.c
View File

@@ -63,7 +63,7 @@
#define FLEXCAN_MCR_BCC BIT(16)
#define FLEXCAN_MCR_LPRIO_EN BIT(13)
#define FLEXCAN_MCR_AEN BIT(12)
#define FLEXCAN_MCR_MAXMB(x) ((x) & 0xf)
#define FLEXCAN_MCR_MAXMB(x) ((x) & 0x1f)
#define FLEXCAN_MCR_IDAM_A (0 << 8)
#define FLEXCAN_MCR_IDAM_B (1 << 8)
#define FLEXCAN_MCR_IDAM_C (2 << 8)
@@ -745,9 +745,11 @@ static int flexcan_chip_start(struct net_device *dev)
*
*/
reg_mcr = flexcan_read(&regs->mcr);
reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff);
reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_FEN | FLEXCAN_MCR_HALT |
FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN |
FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_SRX_DIS;
FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_SRX_DIS |
FLEXCAN_MCR_MAXMB(FLEXCAN_TX_BUF_ID);
netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr);
flexcan_write(reg_mcr, &regs->mcr);
@@ -792,6 +794,10 @@ static int flexcan_chip_start(struct net_device *dev)
&regs->cantxfg[i].can_ctrl);
}
/* Abort any pending TX, mark Mailbox as INACTIVE */
flexcan_write(FLEXCAN_MB_CNT_CODE(0x4),
&regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
/* acceptance mask/acceptance code (accept everything) */
flexcan_write(0x0, &regs->rxgmask);
flexcan_write(0x0, &regs->rx14mask);