mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-08 03:40:35 +09:00
arm64: dts: rockchip: add rv1 board dts file
Change-Id: Ib10c6a923e3b6f62a083339ccd8807461ff8f26f Signed-off-by: Zorro Liu <lyx@rock-chips.com>
This commit is contained in:
Zorro Liu
@@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-gru.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin-r0.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin-r1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-mid-818-android.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rv1-android.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-box.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-edp.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator-linux.dtb
|
||||
|
||||
910
arch/arm64/boot/dts/rockchip/rk3399-rv1-android.dts
Normal file
910
arch/arm64/boot/dts/rockchip/rk3399-rv1-android.dts
Normal file
@@ -0,0 +1,910 @@
|
||||
/*
|
||||
* Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/sensor-dev.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-android.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3399 VR Board";
|
||||
compatible = "rockchip,vr", "rockchip,rk3399";
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 0>;
|
||||
rockchip,pwm_id= <2>;
|
||||
rockchip,pwm_voltage = <900000>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <4000000>;
|
||||
regulator-max-microvolt = <4000000>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc1v8_s3: vcc1v8-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
io-domains {
|
||||
compatible = "rockchip,rk3399-io-voltage-domain";
|
||||
rockchip,grf = <&grf>;
|
||||
|
||||
bt656-supply = <&vcc1v8_s3>;
|
||||
audio-supply = <&vcc1v8_s3>;
|
||||
sdmmc-supply = <&vcc_sd>;
|
||||
gpio1830-supply = <&vcc1v8_s3>;
|
||||
};
|
||||
|
||||
pmu-io-domains {
|
||||
compatible = "rockchip,rk3399-pmu-io-voltage-domain";
|
||||
rockchip,grf = <&pmugrf>;
|
||||
pmu1830-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
dw_hdmi_audio: dw-hdmi-audio {
|
||||
status = "okay";
|
||||
compatible = "rockchip,dw-hdmi-audio";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
hdmi_sound: hdmi-sound {
|
||||
status = "disabled";
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,name = "rockchip,hdmi";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s2>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&dw_hdmi_audio>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk818 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; /* GPIO0_B2 */
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
wifi_chip_type = "ap6330";
|
||||
sdio_vref = <1800>;
|
||||
WIFI,host_wake_irq = <&gpio0 3 GPIO_ACTIVE_HIGH>; /* GPIO0_a3 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
clocks = <&rk818 1>;
|
||||
clock-names = "ext_clock";
|
||||
//wifi-bt-power-toggle;
|
||||
uart_rts_gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; /* GPIO2_C3 */
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart0_rts>;
|
||||
pinctrl-1 = <&uart0_gpios>;
|
||||
//BT,power_gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; /* GPIOx_xx */
|
||||
BT,reset_gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; /* GPIO0_B1 */
|
||||
BT,wake_gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>; /* GPIO2_D2 */
|
||||
BT,wake_host_irq = <&gpio0 4 GPIO_ACTIVE_HIGH>; /* GPIO0_A4 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
uboot-charge {
|
||||
compatible = "rockchip,uboot-charge";
|
||||
rockchip,uboot-charge-on = <0>;
|
||||
rockchip,android-charge-on = <1>;
|
||||
};
|
||||
|
||||
mpu6500_hid {
|
||||
status = "okay";
|
||||
compatible = "inv-hid,mpu6500";
|
||||
};
|
||||
};
|
||||
|
||||
&cluster0_opp {
|
||||
opp@408000000 {
|
||||
opp-hz = /bits/ 64 <408000000>;
|
||||
opp-microvolt = <800000>;
|
||||
clock-latency-ns = <40000>;
|
||||
};
|
||||
opp@600000000 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
opp@816000000 {
|
||||
opp-hz = /bits/ 64 <816000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
opp@1008000000 {
|
||||
opp-hz = /bits/ 64 <1008000000>;
|
||||
opp-microvolt = <850000>;
|
||||
};
|
||||
opp@1200000000 {
|
||||
opp-hz = /bits/ 64 <1200000000>;
|
||||
opp-microvolt = <925000>;
|
||||
};
|
||||
opp@1416000000 {
|
||||
opp-hz = /bits/ 64 <1416000000>;
|
||||
opp-microvolt = <1075000>;
|
||||
};
|
||||
opp@1512000000 {
|
||||
opp-hz = /bits/ 64 <1512000000>;
|
||||
opp-microvolt = <1100000>;
|
||||
status="disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&cluster1_opp {
|
||||
opp@408000000 {
|
||||
opp-hz = /bits/ 64 <408000000>;
|
||||
opp-microvolt = <800000>;
|
||||
clock-latency-ns = <40000>;
|
||||
};
|
||||
opp@600000000 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
opp@816000000 {
|
||||
opp-hz = /bits/ 64 <816000000>;
|
||||
opp-microvolt = <825000>;
|
||||
};
|
||||
opp@1008000000 {
|
||||
opp-hz = /bits/ 64 <1008000000>;
|
||||
opp-microvolt = <850000>;
|
||||
};
|
||||
opp@1200000000 {
|
||||
opp-hz = /bits/ 64 <1200000000>;
|
||||
opp-microvolt = <900000>;
|
||||
};
|
||||
opp@1416000000 {
|
||||
opp-hz = /bits/ 64 <1416000000>;
|
||||
opp-microvolt = <1000000>;
|
||||
};
|
||||
opp@1608000000 {
|
||||
opp-hz = /bits/ 64 <1608000000>;
|
||||
opp-microvolt = <1050000>;
|
||||
};
|
||||
opp@1800000000 {
|
||||
opp-hz = /bits/ 64 <1800000000>;
|
||||
opp-microvolt = <1150000>;
|
||||
};
|
||||
opp@1992000000 {
|
||||
opp-hz = /bits/ 64 <1992000000>;
|
||||
opp-microvolt = <1225000>;
|
||||
};
|
||||
};
|
||||
|
||||
&CPU_COST_A72 {
|
||||
busy-cost-data = <
|
||||
210 129 /* 408MHz */
|
||||
308 184 /* 600MHz */
|
||||
419 246 /* 816MHz */
|
||||
518 335 /* 1008MHz */
|
||||
617 428 /* 1200MHz */
|
||||
728 573 /* 1416MHz */
|
||||
827 724 /* 1608MHz */
|
||||
925 900 /* 1800MHz */
|
||||
1024 1108 /* 1992MHz */
|
||||
>;
|
||||
idle-cost-data = <
|
||||
15
|
||||
15
|
||||
0
|
||||
>;
|
||||
};
|
||||
|
||||
&CPU_COST_A53 {
|
||||
busy-cost-data = <
|
||||
108 46 /* 408M */
|
||||
159 67 /* 600M */
|
||||
216 90 /* 816M */
|
||||
267 120 /* 1008M */
|
||||
318 153 /* 1200M */
|
||||
375 198 /* 1416M */
|
||||
401 222 /* 1512M */
|
||||
>;
|
||||
idle-cost-data = <
|
||||
6
|
||||
6
|
||||
0
|
||||
>;
|
||||
};
|
||||
|
||||
&CLUSTER_COST_A72 {
|
||||
busy-cost-data = <
|
||||
210 129 /* 408MHz */
|
||||
308 184 /* 600MHz */
|
||||
419 246 /* 816MHz */
|
||||
518 335 /* 1008MHz */
|
||||
617 428 /* 1200MHz */
|
||||
728 573 /* 1416MHz */
|
||||
827 724 /* 1608MHz */
|
||||
925 900 /* 1800MHz */
|
||||
1024 1108 /* 1992MHz */
|
||||
>;
|
||||
idle-cost-data = <
|
||||
65
|
||||
65
|
||||
65
|
||||
>;
|
||||
};
|
||||
|
||||
&CLUSTER_COST_A53 {
|
||||
busy-cost-data = <
|
||||
108 46 /* 408M */
|
||||
159 67 /* 600M */
|
||||
216 90 /* 816M */
|
||||
267 120 /* 1008M */
|
||||
318 153 /* 1200M */
|
||||
375 198 /* 1416M */
|
||||
401 222 /* 1512M */
|
||||
>;
|
||||
idle-cost-data = <
|
||||
56
|
||||
56
|
||||
56
|
||||
>;
|
||||
};
|
||||
|
||||
&gpu_opp_table {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
opp@200000000 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
opp-microvolt = <825000>;
|
||||
};
|
||||
opp@300000000 {
|
||||
opp-hz = /bits/ 64 <300000000>;
|
||||
opp-microvolt = <850000>;
|
||||
};
|
||||
opp@400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <875000>;
|
||||
};
|
||||
opp@500000000 {
|
||||
opp-hz = /bits/ 64 <500000000>;
|
||||
opp-microvolt = <950000>;
|
||||
};
|
||||
opp@600000000 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <1025000>;
|
||||
};
|
||||
opp@800000000 {
|
||||
opp-hz = /bits/ 64 <800000000>;
|
||||
opp-microvolt = <1125000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
clock-frequency = <150000000>;
|
||||
clock-freq-min-max = <400000 150000000>;
|
||||
supports-sd;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
num-slots = <1>;
|
||||
sd-uhs-sdr104;
|
||||
vqmmc-supply = <&vcc_sd>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
clock-frequency = <50000000>;
|
||||
clock-freq-min-max = <200000 50000000>;
|
||||
supports-sdio;
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
supports-emmc;
|
||||
non-removable;
|
||||
keep-power-in-suspend;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <219>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
/* clock-frequency = <400000>; */
|
||||
|
||||
fusb1: fusb30x@22 {
|
||||
compatible = "fairchild,fusb302";
|
||||
reg = <0x22>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fusb1_int>;
|
||||
vbus-5v-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
|
||||
int-n-gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
vdd_cpu_b: syr827@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
pinctrl-0 = <&vsel1_gpio>;
|
||||
vsel-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-initial-state = <3>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: syr828@41 {
|
||||
compatible = "silergy,syr828";
|
||||
reg = <0x41>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
pinctrl-0 = <&vsel2_gpio>;
|
||||
vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-boot-on;
|
||||
regulator-initial-state = <3>;
|
||||
regulator-initial-mode = <1>;/*1:pwm 2: auto mode*/
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk818: pmic@1c {
|
||||
compatible = "rockchip,rk818";
|
||||
status = "okay";
|
||||
reg = <0x1c>;
|
||||
clock-output-names = "xin32k", "wifibt_32kin";
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
extcon = <&fusb0>;
|
||||
#clock-cells = <1>;
|
||||
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_cpu_l: DCDC_REG1 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_center: DCDC_REG2 {
|
||||
regulator-name = "vdd_center";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_rk1608: LDO_REG1 {
|
||||
//regulator-always-on;
|
||||
//regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_rk1608";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd1v8_rk1608: LDO_REG2 {
|
||||
//regulator-always-on;
|
||||
//regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vdd1v8_rk1608";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd1v0_rk1608: LDO_REG3 {
|
||||
//regulator-always-on;
|
||||
//regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vdd1v0_rk1608";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_power_on: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_power_on";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_2v8: LDO_REG5 {
|
||||
//regulator-always-on;
|
||||
//regulator-boot-on;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-name = "vdd_2v8";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
//regulator-always-on;
|
||||
//regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG7 {
|
||||
//regulator-always-on;
|
||||
//regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
battery {
|
||||
compatible = "rk818-battery";
|
||||
ocv_table = <
|
||||
3400 3599 3671 3701 3728 3746 3762
|
||||
3772 3781 3792 3816 3836 3866 3910
|
||||
3942 3971 4002 4050 4088 4132 4183>;
|
||||
design_capacity = <4000>;
|
||||
design_qmax = <4100>;
|
||||
bat_res = <100>;
|
||||
max_input_current = <2000>;
|
||||
max_chrg_current = <1800>;
|
||||
max_chrg_voltage = <4200>;
|
||||
sleep_enter_current = <300>;
|
||||
sleep_exit_current = <300>;
|
||||
power_off_thresd = <3400>;
|
||||
zero_algorithm_vol = <3850>;
|
||||
fb_temperature = <115>;
|
||||
sample_res = <10>;
|
||||
max_soc_offset = <60>;
|
||||
energy_mode = <0>;
|
||||
monitor_sec = <5>;
|
||||
virtual_power = <1>;
|
||||
power_dc2otg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <345>;
|
||||
i2c-scl-falling-time-ns = <11>;
|
||||
|
||||
fusb0: fusb30x@22 {
|
||||
compatible = "fairchild,fusb302";
|
||||
reg = <0x22>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fusb0_int>;
|
||||
int-n-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&threshold {
|
||||
temperature = <85000>; /* millicelsius */
|
||||
};
|
||||
|
||||
&target {
|
||||
temperature = <100000>; /* millicelsius */
|
||||
};
|
||||
|
||||
&soc_crit {
|
||||
temperature = <105000>; /* millicelsius */
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
||||
rockchip,hw-tshut-temp = <110000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rk_key {
|
||||
compatible = "rockchip,key";
|
||||
status = "okay";
|
||||
io-channels = <&saradc 1>;
|
||||
|
||||
power-key {
|
||||
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <116>;
|
||||
label = "power";
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
extcon = <&fusb0>;
|
||||
status = "okay";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
extcon = <&fusb1>;
|
||||
status = "okay";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
extcon = <&fusb0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
extcon = <&fusb1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
extcon = <&fusb0>;
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
extcon = <&fusb1>;
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rk_screen {
|
||||
#include <dt-bindings/display/screen-timing/lcd-box.dtsi>
|
||||
};
|
||||
|
||||
&disp_timings {
|
||||
native-mode = <&timing0>; /* 720p */
|
||||
};
|
||||
|
||||
&timing0 {
|
||||
screen-width = <130>;
|
||||
screen-hight = <72>;
|
||||
};
|
||||
/*
|
||||
&fb {
|
||||
rockchip,uboot-logo-on = <1>;
|
||||
rockchip,disp-mode = <NO_DUAL>;
|
||||
//rockchip,disp-policy = <DISPLAY_POLICY_BOX>;
|
||||
};
|
||||
*/
|
||||
&vopb_rk_fb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_rk_fb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_rk_fb {
|
||||
status = "okay";
|
||||
rockchip,hdmi_video_source = <DISPLAY_SOURCE_LCDC1>;
|
||||
};
|
||||
|
||||
&cdn_dp_fb {
|
||||
status = "okay";
|
||||
extcon = <&fusb1>;
|
||||
phys = <&tcphy1_dp>;
|
||||
dp_vop_sel = <DISPLAY_SOURCE_LCDC0>;
|
||||
};
|
||||
|
||||
&cdn_dp_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
mali-supply = <&vdd_gpu>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
uart0_gpios: uart0-gpios {
|
||||
rockchip,pins = <2 19 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<1 21 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
vsel1_gpio: vsel1-gpio {
|
||||
rockchip,pins =
|
||||
<1 17 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
vsel2_gpio: vsel2-gpio {
|
||||
rockchip,pins =
|
||||
<1 14 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
spi1 {
|
||||
spi1_gpio: spi1-gpio {
|
||||
rockchip,pins =
|
||||
<1 7 RK_FUNC_GPIO &pcfg_output_low>,
|
||||
<1 8 RK_FUNC_GPIO &pcfg_output_low>,
|
||||
<1 9 RK_FUNC_GPIO &pcfg_output_low>,
|
||||
<1 10 RK_FUNC_GPIO &pcfg_output_low>;
|
||||
};
|
||||
};
|
||||
|
||||
fusb30x {
|
||||
fusb0_int: fusb0-int {
|
||||
rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
fusb1_int: fusb1-int {
|
||||
rockchip,pins = <1 24 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user