ARM: dts: rockchip: add rv1103g-rmsl311-dloc-sl-v10.dts

Signed-off-by: Wang Xiaobin <xb.wang@rock-chips.com>
Change-Id: I6464db605365ab25b7057fcbfd0c92bccd38582e

arch/arm/boot/dts/Makefile

@@ -974,6 +974,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rv1103g-38x38-ipc-v10.dtb \
 	rv1103g-battery-ipc-v10.dtb \
 	rv1103g-evb-v10.dtb \
+	rv1103g-rmsl311-dloc-sl-v10.dtb \
 	rv1103g-scaner-v10.dtb \
 	rv1106g-38x38-ipc-v10.dtb \
 	rv1106g-38x38-ipc-v10-spi-nand.dtb \

arch/arm/boot/dts/rv1103g-rmsl311-dloc-sl-v10.dts

@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rv1103.dtsi"
+#include "rv1106-thunder-boot-spi-nor.dtsi"
+
+/ {
+	model = "Rockchip RV1103G RMSL311 DLOC Board";
+	compatible = "rockchip,rv1103g-rmsl311-dloc-v10", "rockchip,rv1103";
+
+	chosen {
+		bootargs = "loglevel=0 console=ttyFIQ0 root=/dev/rd0 snd_soc_core.prealloc_buffer_size_kbytes=16 coherent_pool=0 driver_async_probe=dwmmc_rockchip";
+	};
+
+	vcc_1v8: vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_arm: vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <724000>;
+		regulator-max-microvolt = <1078000>;
+		regulator-init-microvolt = <950000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+	};
+};
+
+&csi2_dphy_hw {
+	status = "okay";
+};
+
+&csi2_dphy1 {
+	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dphy1_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sc035gs_out>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dphy1_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&mipi0_csi2_input>;
+			};
+		};
+	};
+};
+
+&fiq_debugger {
+	rockchip,irq-mode-enable = <1>;
+	status = "okay";
+	rockchip,baudrate = <1500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4m2_xfer>;
+
+	sc035gs: sc035gs@30 {
+		compatible = "smartsens,sc035gs";
+		status = "okay";
+		reg = <0x30>;
+		clocks = <&cru MCLK_REF_MIPI0>;
+		clock-names = "xvclk";
+		reset-gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_refclk_out0>;
+
+		rockchip,camera-module-index = <0>;
+		rockchip,camera-module-facing = "back";
+		rockchip,camera-module-name = "default";
+		rockchip,camera-module-lens-name = "default";
+
+		port {
+			sc035gs_out: endpoint {
+				remote-endpoint = <&dphy1_in>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	vcsel_rk803: vcsel_rk803@63 {
+		compatible = "rockchip,rk803";
+		status = "okay";
+		reg = <0x63>;
+
+		gpio-encc1-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; //Flood
+		gpio-encc2-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; //PRO
+	};
+};
+
+&memory {
+	reg = <0x00000000 0x04000000>;
+};
+
+&meta {
+	/* reserved meta partition 384KB */
+	reg = <0x01e00000 (384 * 0x400)>;
+};
+
+&mipi0_csi2 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi0_csi2_input: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dphy1_out>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi0_csi2_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&cif_mipi0_in>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&npu {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&rga2 {
+	status = "okay";
+};
+
+&rkcif {
+	status = "okay";
+};
+
+&rkcif_mipi_lvds {
+	status = "okay";
+
+	port {
+		/* MIPI CSI-2 endpoint */
+		cif_mipi0_in: endpoint {
+			remote-endpoint = <&mipi0_csi2_output>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&rkcif_mipi_lvds_sditf {
+	status = "okay";
+
+	port {
+		/* MIPI CSI-2 endpoint */
+		mipi_lvds0_sditf: endpoint {
+			remote-endpoint = <&isp0_in>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&rkisp {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mipi_pins>;
+
+	max-input = <640 480 30>;
+};
+
+&rkisp_vir0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			isp0_in: endpoint {
+				remote-endpoint = <&mipi_lvds0_sditf>;
+			};
+		};
+	};
+};
+
+&rkisp_vir1 {
+	status = "okay";
+};
+
+&rng {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&sfc {
+	assigned-clocks = <&cru SCLK_SFC>;
+	assigned-clock-rates = <125000000>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <125000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbdrd {
+	status = "okay";
+};
+
+&usbdrd_dwc3 {
+	extcon = <&u2phy>;
+	status = "okay";
+};