mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-07 11:26:02 +09:00
arm64: dts: rockchip: add support for Firefly ROC-RK3328-PC
ROC-RK3328-PC is the board inside the portable Firefly Station M1 Geek PC. As a redesign after the ROC-RK3328-CC, it uses TypeC as power input and OTG port, embedded with eMMC 5.1 storage and a SDIO WiFi/BT chip (RTL8723DS). - Rockchip RK3328 SoC - 2/4GB LPDDR3 RAM - 16/32/64/128GB eMMC 5.1 - TF card slot - USB 3.0 Port x 1, USB 2.0 Port x 1, TypeC Port x 1 (Power/OTG) - HDMI - Gigabit Ethernet - WiFi: RTL8723DS - Audio: RK3328 - Key: Power, Reset, Recovery - LED: POWER, USER - IR Signed-off-by: Levin Du <djw@t-chip.com.cn> Link: https://lore.kernel.org/r/20210709080126.17045-3-djw@t-chip.com.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb
|
||||
|
||||
110
arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
Normal file
110
arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
Normal file
@@ -0,0 +1,110 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
// Copyright (c) 2021 T-Chip Intelligent Technology Co., Ltd
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
#include "rk3328-roc-cc.dts"
|
||||
|
||||
/ {
|
||||
model = "Firefly ROC-RK3328-PC";
|
||||
compatible = "firefly,roc-rk3328-pc", "rockchip,rk3328";
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1750000>;
|
||||
|
||||
/* This button is unpopulated out of the factory. */
|
||||
button-recovery {
|
||||
label = "Recovery";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <10000>;
|
||||
};
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
linux,rc-map-name = "rc-khadas";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_int>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_en>, <&wifi_host_wake>;
|
||||
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&codec {
|
||||
mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_logic>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
ir {
|
||||
ir_int: ir-int {
|
||||
rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmcio {
|
||||
sdio_per_pin: sdio-per-pin {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_en: wifi-en {
|
||||
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_host_wake: wifi-host-wake {
|
||||
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_4ma>;
|
||||
};
|
||||
|
||||
bt_rst: bt-rst {
|
||||
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_en: bt-en {
|
||||
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmic_int_l {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
&rk805 {
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_18>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb20_host_drv {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
&vcc_host1_5v {
|
||||
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&vcc_sdio {
|
||||
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio_per_pin>;
|
||||
};
|
||||
Reference in New Issue
Block a user