ASoC: es8323: update codec es8323 driver

This patch update the es8323 codec drivers as follows:

o Remove snd_soc_control_type:
  Now that upstream remove definition of snd_soc_control_type.

o Replace SOC_DAPM_VALUE_ENUM:
  SOC_DAPM_VALUE_ENUM is replaced by SOC_DAPM_ENUM.

o Remove codec->dapm.bias_level = level:
  The line at the end of the set_bias_level callback to update the bias_level state. Now that upstream move this update into snd_soc_dapm_force_bias_level().

o Remove .owner = THIS_MODULE:
  No need to set .owner here.The i2c_driver core will do.

o module_i2c_driver:
  Convert to use module_i2c_driver is simple.

o Add match table:
  Add a device tree match table for es8323 codec driver.

o Add mclk:
  The I2S block provide the output clock as the mclk,so add it.

o Adjust code format:
  Adjust some problems of code format.

Change-Id: I8e0647310eb11325c39ebb408f75cc9ed28df71d
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>

sound/soc/codecs/Kconfig

@@ -64,6 +64,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_DMIC
 	select SND_SOC_BT_SCO
 	select SND_SOC_ES8316 if I2C
+	select SND_SOC_ES8323 if I2C
 	select SND_SOC_ES8328_SPI if SPI_MASTER
 	select SND_SOC_ES8328_I2C if I2C
 	select SND_SOC_GTM601
@@ -465,6 +466,10 @@ config SND_SOC_ES8316
 	tristate "Everest Semi ES8316 CODEC"
 	depends on I2C
 
+config SND_SOC_ES8323
+	tristate "Everest Semi ES8323 CODEC"
+	depends on I2C
+
 config SND_SOC_HDMI_CODEC
 	tristate
 	select SND_PCM_ELD

sound/soc/codecs/Makefile

@@ -57,6 +57,7 @@ snd-soc-dw-hdmi-audio-objs := dw-hdmi-audio.o
 snd-soc-bt-sco-objs := bt-sco.o
 snd-soc-dmic-objs := dmic.o
 snd-soc-es8316-objs := es8316.o
+snd-soc-es8323-objs := es8323.o
 snd-soc-es8328-objs := es8328.o
 snd-soc-es8328-i2c-objs := es8328-i2c.o
 snd-soc-es8328-spi-objs := es8328-spi.o
@@ -256,6 +257,7 @@ obj-$(CONFIG_SND_SOC_DW_HDMI_AUDIO)	+= snd-soc-dw-hdmi-audio.o
 obj-$(CONFIG_SND_SOC_BT_SCO)	+= snd-soc-bt-sco.o
 obj-$(CONFIG_SND_SOC_DMIC)	+= snd-soc-dmic.o
 obj-$(CONFIG_SND_SOC_ES8316)	+= snd-soc-es8316.o
+obj-$(CONFIG_SND_SOC_ES8323)	+= snd-soc-es8323.o
 obj-$(CONFIG_SND_SOC_ES8328)	+= snd-soc-es8328.o
 obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o
 obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o