[ Upstream commit f5f185bf7c42f6ca885202fefc40fc871d08a722 ]
The DMA-related nodes RDMA/WROT in MDP3 should be changed to generic names.
In addition, fix improper space indent in example.
Fixes: 4ad7b39623 ("media: dt-binding: mediatek: add bindings for MediaTek MDP3 components")
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7269cba53d906cf257c139d3b3a53ad272176bca ]
Currently supplicant dependent optee device enumeration only registers
devices whenever tee-supplicant is invoked for the first time. But it
forgets to remove devices when tee-supplicant daemon stops running and
closes its context gracefully. This leads to following error for fTPM
driver during reboot/shutdown:
[ 73.466791] tpm tpm0: ftpm_tee_tpm_op_send: SUBMIT_COMMAND invoke error: 0xffff3024
Fix this by adding an attribute for supplicant dependent devices so that
the user-space service can detect and detach supplicant devices before
closing the supplicant:
$ for dev in /sys/bus/tee/devices/*; do if [[ -f "$dev/need_supplicant" && -f "$dev/driver/unbind" ]]; \
then echo $(basename "$dev") > $dev/driver/unbind; fi done
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://github.com/OP-TEE/optee_os/issues/6094
Fixes: 5f178bb71e ("optee: enable support for multi-stage bus enumeration")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
[jw: fixed up Date documentation]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94b3f0b5af2c7af69e3d6e0cdd9b0ea535f22186 ]
The CSD lock seems to get stuck in 2 "modes". When it gets stuck
temporarily, it usually gets released in a few seconds, and sometimes
up to one or two minutes.
If the CSD lock stays stuck for more than several minutes, it never
seems to get unstuck, and gradually more and more things in the system
end up also getting stuck.
In the latter case, we should just give up, so the system can dump out
a little more information about what went wrong, and, with panic_on_oops
and a kdump kernel loaded, dump a whole bunch more information about what
might have gone wrong. In addition, there is an smp.panic_on_ipistall
kernel boot parameter that by default retains the old behavior, but when
set enables the panic after the CSD lock has been stuck for more than
the specified number of milliseconds, as in 300,000 for five minutes.
[ paulmck: Apply Imran Khan feedback. ]
[ paulmck: Apply Leonardo Bras feedback. ]
Link: https://lore.kernel.org/lkml/bc7cc8b0-f587-4451-8bcd-0daae627bcc7@paulmck-laptop/
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Imran Khan <imran.f.khan@oracle.com>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0144e3b85d ]
The GHCB specification declares that the firmware error value for
a guest request will be stored in the lower 32 bits of EXIT_INFO_2. The
upper 32 bits are for the VMM's own error code. The fw_err argument to
snp_guest_issue_request() is thus a misnomer, and callers will need
access to all 64 bits.
The type of unsigned long also causes problems, since sw_exit_info2 is
u64 (unsigned long long) vs the argument's unsigned long*. Change this
type for issuing the guest request. Pass the ioctl command struct's error
field directly instead of in a local variable, since an incomplete guest
request may not set the error code, and uninitialized stack memory would
be written back to user space.
The firmware might not even be called, so bookend the call with the no
firmware call error and clear the error.
Since the "fw_err" field is really exitinfo2 split into the upper bits'
vmm error code and lower bits' firmware error code, convert the 64 bit
value to a union.
[ bp:
- Massage commit message
- adjust code
- Fix a build issue as
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303070609.vX6wp2Af-lkp@intel.com
- print exitinfo2 in hex
Tom:
- Correct -EIO exit case. ]
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230214164638.1189804-5-dionnaglaze@google.com
Link: https://lore.kernel.org/r/20230307192449.24732-12-bp@alien8.de
Stable-dep-of: db10cb9b5746 ("virt: sevguest: Fix passing a stack buffer as a scatterlist target")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efb339a833 ]
The PSP can return a "firmware error" code of -1 in circumstances where
the PSP has not actually been called. To make this protocol unambiguous,
name the value SEV_RET_NO_FW_CALL.
[ bp: Massage a bit. ]
Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221207010210.2563293-2-dionnaglaze@google.com
Stable-dep-of: db10cb9b5746 ("virt: sevguest: Fix passing a stack buffer as a scatterlist target")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61fdd1f1d2c183ec256527d16d75e75c3582af82 ]
The MT6366 PMIC is mostly, but not fully, compatible with MT6358. It has
a different set of regulators. Specifically, it lacks the camera related
VCAM* LDOs and VLDO28, but has additional VM18, VMDDR, and VSRAM_CORE LDOs.
The PMICs contain a chip ID register that can be used to detect which
exact model is preset, so it is possible to share a common base
compatible string.
Add a separate compatible for the MT6366 PMIC, with a fallback to the
MT6358 PMIC.
Fixes: 49be163055 ("dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-2-wenst@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b650d953cd ]
Under certain circumstances, the tcp receive buffer memory limit
set by autotuning (sk_rcvbuf) is increased due to incoming data
packets as a result of the window not closing when it should be.
This can result in the receive buffer growing all the way up to
tcp_rmem[2], even for tcp sessions with a low BDP.
To reproduce: Connect a TCP session with the receiver doing
nothing and the sender sending small packets (an infinite loop
of socket send() with 4 bytes of payload with a sleep of 1 ms
in between each send()). This will cause the tcp receive buffer
to grow all the way up to tcp_rmem[2].
As a result, a host can have individual tcp sessions with receive
buffers of size tcp_rmem[2], and the host itself can reach tcp_mem
limits, causing the host to go into tcp memory pressure mode.
The fundamental issue is the relationship between the granularity
of the window scaling factor and the number of byte ACKed back
to the sender. This problem has previously been identified in
RFC 7323, appendix F [1].
The Linux kernel currently adheres to never shrinking the window.
In addition to the overallocation of memory mentioned above, the
current behavior is functionally incorrect, because once tcp_rmem[2]
is reached when no remediations remain (i.e. tcp collapse fails to
free up any more memory and there are no packets to prune from the
out-of-order queue), the receiver will drop in-window packets
resulting in retransmissions and an eventual timeout of the tcp
session. A receive buffer full condition should instead result
in a zero window and an indefinite wait.
In practice, this problem is largely hidden for most flows. It
is not applicable to mice flows. Elephant flows can send data
fast enough to "overrun" the sk_rcvbuf limit (in a single ACK),
triggering a zero window.
But this problem does show up for other types of flows. Examples
are websockets and other type of flows that send small amounts of
data spaced apart slightly in time. In these cases, we directly
encounter the problem described in [1].
RFC 7323, section 2.4 [2], says there are instances when a retracted
window can be offered, and that TCP implementations MUST ensure
that they handle a shrinking window, as specified in RFC 1122,
section 4.2.2.16 [3]. All prior RFCs on the topic of tcp window
management have made clear that sender must accept a shrunk window
from the receiver, including RFC 793 [4] and RFC 1323 [5].
This patch implements the functionality to shrink the tcp window
when necessary to keep the right edge within the memory limit by
autotuning (sk_rcvbuf). This new functionality is enabled with
the new sysctl: net.ipv4.tcp_shrink_window
Additional information can be found at:
https://blog.cloudflare.com/unbounded-memory-usage-by-tcp-for-receive-buffers-and-how-we-fixed-it/
[1] https://www.rfc-editor.org/rfc/rfc7323#appendix-F
[2] https://www.rfc-editor.org/rfc/rfc7323#section-2.4
[3] https://www.rfc-editor.org/rfc/rfc1122#page-91
[4] https://www.rfc-editor.org/rfc/rfc793
[5] https://www.rfc-editor.org/rfc/rfc1323
Signed-off-by: Mike Freemon <mfreemon@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 471470bc70 upstream.
Implement the workaround for ARM Cortex-A520 erratum 2966298. On an
affected Cortex-A520 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The workaround is to execute a TLBI before returning to EL0 after all
loads of privileged data. A non-shareable TLBI to any address is
sufficient.
The workaround isn't necessary if page table isolation (KPTI) is
enabled, but for simplicity it will be. Page table isolation should
normally be disabled for Cortex-A520 as it supports the CSV3 feature
and the E0PD feature (used when KASLR is enabled).
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230921194156.1050055-2-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5027d54a9c upstream.
accept_ra_min_rtr_lft only considered the lifetime of the default route
and discarded entire RAs accordingly.
This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and
applies the value to individual RA sections; in particular, router
lifetime, PIO preferred lifetime, and RIO lifetime. If any of those
lifetimes are lower than the configured value, the specific RA section
is ignored.
In order for the sysctl to be useful to Android, it should really apply
to all lifetimes in the RA, since that is what determines the minimum
frequency at which RAs must be processed by the kernel. Android uses
hardware offloads to drop RAs for a fraction of the minimum of all
lifetimes present in the RA (some networks have very frequent RAs (5s)
with high lifetimes (2h)). Despite this, we have encountered networks
that set the router lifetime to 30s which results in very frequent CPU
wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the
WiFi firmware) entirely on such networks, it seems better to ignore the
misconfigured routers while still processing RAs from other IPv6 routers
on the same network (i.e. to support IoT applications).
The previous implementation dropped the entire RA based on router
lifetime. This turned out to be hard to expand to the other lifetimes
present in the RA in a consistent manner; dropping the entire RA based
on RIO/PIO lifetimes would essentially require parsing the whole thing
twice.
Fixes: 1671bcfd76 ("net: add sysctl accept_ra_min_rtr_lft")
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230726230701.919212-1-prohr@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1671bcfd76 upstream.
This change adds a new sysctl accept_ra_min_rtr_lft to specify the
minimum acceptable router lifetime in an RA. If the received RA router
lifetime is less than the configured value (and not 0), the RA is
ignored.
This is useful for mobile devices, whose battery life can be impacted
by networks that configure RAs with a short lifetime. On such networks,
the device should never gain IPv6 provisioning and should attempt to
drop RAs via hardware offload, if available.
Signed-off-by: Patrick Rohr <prohr@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4597648fdd upstream.
This reverts commits 86327e8eb9 ("memcg: drop kmem.limit_in_bytes") and
partially reverts 58056f7750 ("memcg, kmem: further deprecate
kmem.limit_in_bytes") which have incrementally removed support for the
kernel memory accounting hard limit. Unfortunately it has turned out that
there is still userspace depending on the existence of
memory.kmem.limit_in_bytes [1]. The underlying functionality is not
really required but the non-existent file just confuses the userspace
which fails in the result. The patch to fix this on the userspace side
has been submitted but it is hard to predict how it will propagate through
the maze of 3rd party consumers of the software.
Now, reverting alone 86327e8eb9 is not an option because there is
another set of userspace which cannot cope with ENOTSUPP returned when
writing to the file. Therefore we have to go and revisit 58056f7750 as
well. There are two ways to go ahead. Either we give up on the
deprecation and fully revert 58056f7750 as well or we can keep
kmem.limit_in_bytes but make the write a noop and warn about the fact.
This should work for both known breaking workloads which depend on the
existence but do not depend on the hard limit enforcement.
Note to backporters to stable trees. a8c49af3be ("memcg: add per-memcg
total kernel memory stat") introduced in 4.18 has added memcg_account_kmem
so the accounting is not done by obj_cgroup_charge_pages directly for v1
anymore. Prior kernels need to add it explicitly (thanks to Johannes for
pointing this out).
[akpm@linux-foundation.org: fix build - remove unused local]
Link: http://lkml.kernel.org/r/20230920081101.GA12096@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net [1]
Link: https://lkml.kernel.org/r/ZRE5VJozPZt9bRPy@dhcp22.suse.cz
Fixes: 86327e8eb9 ("memcg: drop kmem.limit_in_bytes")
Fixes: 58056f7750 ("memcg, kmem: further deprecate kmem.limit_in_bytes")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86327e8eb9 upstream.
kmem.limit_in_bytes (v1 way to limit kernel memory usage) has been
deprecated since 58056f7750 ("memcg, kmem: further deprecate
kmem.limit_in_bytes") merged in 5.16. We haven't heard about any serious
users since then but it seems that the mere presence of the file is
causing more harm thatn good. We (SUSE) have had several bug reports from
customers where Docker based containers started to fail because a write to
kmem.limit_in_bytes has failed.
This was unexpected because runc code only expects ENOENT (kmem disabled)
or EBUSY (tasks already running within cgroup). So a new error code was
unexpected and the whole container startup failed. This has been later
addressed by
52390d6804
so current Docker runtimes do not suffer from the problem anymore. There
are still older version of Docker in use and likely hard to get rid of
completely.
Address this by wiping out the file completely and effectively get back to
pre 4.5 era and CONFIG_MEMCG_KMEM=n configuration.
I would recommend backporting to stable trees which have picked up
58056f7750 ("memcg, kmem: further deprecate kmem.limit_in_bytes").
[mhocko@suse.com: restore _KMEM switch case]
Link: https://lkml.kernel.org/r/ZKe5wxdbvPi5Cwd7@dhcp22.suse.cz
Link: https://lkml.kernel.org/r/20230704115240.14672-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0242737dc4 ]
Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU
disable control sometimes fail to disable the counters. This will lead
to error or inaccurate data since before we enable the counters the
counter's still counting for the event used in last perf session.
This patch tries to fix this by hardening the global disable process.
Before disable the PMU, writing an invalid event type (0xffff) to
focibly stop the counters. Correspondingly restore each events on
pmu::pmu_enable().
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 86327e8eb9 upstream.
kmem.limit_in_bytes (v1 way to limit kernel memory usage) has been
deprecated since 58056f7750 ("memcg, kmem: further deprecate
kmem.limit_in_bytes") merged in 5.16. We haven't heard about any serious
users since then but it seems that the mere presence of the file is
causing more harm thatn good. We (SUSE) have had several bug reports from
customers where Docker based containers started to fail because a write to
kmem.limit_in_bytes has failed.
This was unexpected because runc code only expects ENOENT (kmem disabled)
or EBUSY (tasks already running within cgroup). So a new error code was
unexpected and the whole container startup failed. This has been later
addressed by
52390d6804
so current Docker runtimes do not suffer from the problem anymore. There
are still older version of Docker in use and likely hard to get rid of
completely.
Address this by wiping out the file completely and effectively get back to
pre 4.5 era and CONFIG_MEMCG_KMEM=n configuration.
I would recommend backporting to stable trees which have picked up
58056f7750 ("memcg, kmem: further deprecate kmem.limit_in_bytes").
[mhocko@suse.com: restore _KMEM switch case]
Link: https://lkml.kernel.org/r/ZKe5wxdbvPi5Cwd7@dhcp22.suse.cz
Link: https://lkml.kernel.org/r/20230704115240.14672-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ae440c5da3 ]
Some drivers firmwares parse by themselves slice header and need
num_delta_pocs_of_ref_rps_idx value to parse slice header
short_term_ref_pic_set().
Use one of the 4 reserved bytes to store this value without
changing the v4l2_ctrl_hevc_decode_params structure size and padding.
This value also exist in DXVA API.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix typo in num_delta_pocs_of_ref_rps_idx doc]
Stable-dep-of: 297160d411 ("media: mediatek: vcodec: move core context from device to each instance")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5f641174a1 upstream.
The `nocrt` module parameter has no code associated with it and does
nothing. As `crt=-1` has same functionality as what nocrt should be
doing drop `nocrt` and associated documentation.
This should fix a quirk for Gigabyte GA-7ZX that used `nocrt` and
thus didn't function properly.
Fixes: 8c99fdce30 ("ACPI: thermal: set "thermal.nocrt" via DMI on Gigabyte GA-7ZX")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
