The use_optimistic sysctl makes optimistic IPv6 addresses
equivalent to preferred addresses for source address selection
(e.g., when calling connect()), but it does not allow an
application to bind to optimistic addresses. This behaviour is
inconsistent - for example, it doesn't make sense for bind() to
an optimistic address fail with EADDRNOTAVAIL, but connect() to
choose that address outgoing address on the same socket.
Bug: 17769720
Bug: 18609055
Change-Id: I9de0d6c92ac45e29d28e318ac626c71806666f13
Signed-off-by: Erik Kline <ek@google.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
When __cpufreq_driver_target() in speedchange_task failed for some reason, the
policy->cur could be lower than the target_freq. The governor misses to change
the target_freq if the target_freq is equal to the next_freq at the next sample
time.
Added a check to prevent the CPU to stay at the speed that is lower than the
target_freq for long duration.
Change-Id: Ibfdcd193b8280390b8f8374a63218aa31267f310
Signed-off-by: Minsung Kim <ms925.kim@samsung.com>
This unbreaks the build on architectures such as um that do not
support CONFIG_PM_SLEEP.
Change-Id: Ia846ed0a7fca1d762ececad20748d23610e8544f
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
The aarch64-linux-android- toolchain enables -fpic by default. -fpic
isn't needed for the kernel and breaks CONFIG_JUMP_LABEL, so turn it
off.
Change-Id: I685da1dc60e4cf1e9abcfb56e03654675ac02a0c
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Surfaceflinger uses binder heavily to receive/send frames from applications
while compositing the screen. Change the binder mutex to an rt mutex to minimize
instances where high priority surfaceflinger binder work is blocked by lower
priority binder ipc.
Signed-off-by: Riley Andrews <riandrews@google.com>
Change-Id: I086a715267648448f0c5f62b037a3093d1079a79
Use the 'allow_attach' handler for the 'mem' cgroup to allow
non-root processes to add arbitrary processes to a 'mem' cgroup
if it has the CAP_SYS_NICE capability set.
Bug: 18260435
Change-Id: If7d37bf90c1544024c4db53351adba6a64966250
Signed-off-by: Rom Lemarchand <romlem@android.com>
move cpu_cgroup_allow_attach to a common subsys_cgroup_allow_attach.
This allows any process with CAP_SYS_NICE to move tasks across cgroups if
they use this function as their allow_attach handler.
Bug: 18260435
Change-Id: I6bb4933d07e889d0dc39e33b4e71320c34a2c90f
Signed-off-by: Rom Lemarchand <romlem@android.com>
this gives ability to convey the valid values of supported rates in
sample_rates array
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit 929559be6d)
Signed-off-by: Yuchen Song <yuchens@nvidia.com>
Change-Id: Icfbb6d272a70c0a94719613c00bac18c5a0e3f87
Now that we don't use SNDRV_PCM_RATE_xxx bit fields for sample rate, we need to
change the description to an array for describing the sample rates supported by
the sink/source
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit b8bab04829)
Signed-off-by: Yuchen Song <yuchens@nvidia.com>
Change-Id: I6c2fa5a5034ec749e9d7a71c49a1108af2416848
commit f0e9c080 - "ALSA: compress: change the way sample rates are sent to
kernel" changed the way sample rates are sent. So now we don't need to check for
PCM_RATE_xxx in kernel
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit 2aac06f787)
Signed-off-by: Yuchen Song <yuchens@nvidia.com>
Change-Id: I6448d844fb31097bf33e52c23a7e38d6b089ce69
The usage of SNDRV_RATES is not effective as we can have rates like 12000 or
some other ones used by decoders. This change the usage of this to use the raw
Hz values to be sent to kernel
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit f0e9c08065)
Signed-off-by: Yuchen Song <yuchens@nvidia.com>
Change-Id: Ia4c67405b9cf9aef9c641bce9b02a994939eae00
Add a sysctl that causes an interface's optimistic addresses
to be considered equivalent to other non-deprecated addresses
for source address selection purposes. Preferred addresses
will still take precedence over optimistic addresses, subject
to other ranking in the source address selection algorithm.
This is useful where different interfaces are connected to
different networks from different ISPs (e.g., a cell network
and a home wifi network).
The current behaviour complies with RFC 3484/6724, and it
makes sense if the host has only one interface, or has
multiple interfaces on the same network (same or cooperating
administrative domain(s), but not in the multiple distinct
networks case.
For example, if a mobile device has an IPv6 address on an LTE
network and then connects to IPv6-enabled wifi, while the wifi
IPv6 address is undergoing DAD, IPv6 connections will try use
the wifi default route with the LTE IPv6 address, and will get
stuck until they time out.
Also, because optimistic nodes can receive frames, issue
an RTM_NEWADDR as soon as DAD starts (with the IFA_F_OPTIMSTIC
flag appropriately set). A second RTM_NEWADDR is sent if DAD
completes (the address flags have changed), otherwise an
RTM_DELADDR is sent.
Also: add an entry in ip-sysctl.txt for optimistic_dad.
[cherry-pick of net-next 7fd2561e4e]
Signed-off-by: Erik Kline <ek@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bug: 17769720
Change-Id: Ic7e50781c607e1f3a492d9ce7395946efb95c533
Wakeup reason is set before driver resume handlers are called.
It is cleared before driver suspend handlers are called, on
PM_SUSPEND_PREPARE.
Change-Id: I04218c9b0c115a7877e8029c73e6679ff82e0aa4
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Extends the last_resume_reason to log suspend abort reason. The abort
reasons will have "Abort:" appended at the start to distinguish itself
from the resume reason.
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
Change-Id: I3207f1844e3d87c706dfc298fb10e1c648814c5f
The change is to compile on kernels where cpufreq stats are compiled as
a module (CONFIG_CPU_FREQ_STAT=m), because total_cpus is not exported for
module use.
Reported-By: Emilio López <elopez93@gmail.com>
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
Change-Id: I4f3c74f0fac5e8d9449655b26bf3b407b0fe4290
On the syscall tracing path, we call out to secure_computing() to allow
seccomp to check the syscall number being attempted. As part of this, a
SIGTRAP may be sent to the tracer and the syscall could be re-written by
a subsequent SET_SYSCALL ptrace request. Unfortunately, this new syscall
is ignored by the current code unless TIF_SYSCALL_TRACE is also set on
the current thread.
This patch slightly reworks the enter path of the syscall tracing code
so that we always reload the syscall number from
current_thread_info()->syscall after the potential ptrace traps.
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Current upstream kernel hangs with mips and powerpc targets in
uniprocessor mode if SECCOMP is configured.
Bisect points to commit dbd952127d ("seccomp: introduce writer locking").
Turns out that code such as
BUG_ON(!spin_is_locked(&list_lock));
can not be used in uniprocessor mode because spin_is_locked() always
returns false in this configuration, and that assert_spin_locked()
exists for that very purpose and must be used instead.
Fixes: dbd952127d ("seccomp: introduce writer locking")
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Applying restrictive seccomp filter programs to large or diverse
codebases often requires handling threads which may be started early in
the process lifetime (e.g., by code that is linked in). While it is
possible to apply permissive programs prior to process start up, it is
difficult to further restrict the kernel ABI to those threads after that
point.
This change adds a new seccomp syscall flag to SECCOMP_SET_MODE_FILTER for
synchronizing thread group seccomp filters at filter installation time.
When calling seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_TSYNC,
filter) an attempt will be made to synchronize all threads in current's
threadgroup to its new seccomp filter program. This is possible iff all
threads are using a filter that is an ancestor to the filter current is
attempting to synchronize to. NULL filters (where the task is running as
SECCOMP_MODE_NONE) are also treated as ancestors allowing threads to be
transitioned into SECCOMP_MODE_FILTER. If prctrl(PR_SET_NO_NEW_PRIVS,
...) has been set on the calling thread, no_new_privs will be set for
all synchronized threads too. On success, 0 is returned. On failure,
the pid of one of the failing threads will be returned and no filters
will have been applied.
The race conditions against another thread are:
- requesting TSYNC (already handled by sighand lock)
- performing a clone (already handled by sighand lock)
- changing its filter (already handled by sighand lock)
- calling exec (handled by cred_guard_mutex)
The clone case is assisted by the fact that new threads will have their
seccomp state duplicated from their parent before appearing on the tasklist.
Holding cred_guard_mutex means that seccomp filters cannot be assigned
while in the middle of another thread's exec (potentially bypassing
no_new_privs or similar). The call to de_thread() may kill threads waiting
for the mutex.
Changes across threads to the filter pointer includes a barrier.
Based on patches by Will Drewry.
Suggested-by: Julien Tinnes <jln@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
This changes the mode setting helper to allow threads to change the
seccomp mode from another thread. We must maintain barriers to keep
TIF_SECCOMP synchronized with the rest of the seccomp state.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Conflicts:
kernel/seccomp.c
Normally, task_struct.seccomp.filter is only ever read or modified by
the task that owns it (current). This property aids in fast access
during system call filtering as read access is lockless.
Updating the pointer from another task, however, opens up race
conditions. To allow cross-thread filter pointer updates, writes to the
seccomp fields are now protected by the sighand spinlock (which is shared
by all threads in the thread group). Read access remains lockless because
pointer updates themselves are atomic. However, writes (or cloning)
often entail additional checking (like maximum instruction counts)
which require locking to perform safely.
In the case of cloning threads, the child is invisible to the system
until it enters the task list. To make sure a child can't be cloned from
a thread and left in a prior state, seccomp duplication is additionally
moved under the sighand lock. Then parent and child are certain have
the same seccomp state when they exit the lock.
Based on patches by Will Drewry and David Drysdale.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Conflicts:
kernel/fork.c
In preparation for adding seccomp locking, move filter creation away
from where it is checked and applied. This will allow for locking where
no memory allocation is happening. The validation, filter attachment,
and seccomp mode setting can all happen under the future locks.
For extreme defensiveness, I've added a BUG_ON check for the calculated
size of the buffer allocation in case BPF_MAXINSN ever changes, which
shouldn't ever happen. The compiler should actually optimize out this
check since the test above it makes it impossible.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Conflicts:
kernel/seccomp.c
Since seccomp transitions between threads requires updates to the
no_new_privs flag to be atomic, the flag must be part of an atomic flag
set. This moves the nnp flag into a separate task field, and introduces
accessors.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Conflicts:
kernel/sys.c
This adds the new "seccomp" syscall with both an "operation" and "flags"
parameter for future expansion. The third argument is a pointer value,
used with the SECCOMP_SET_MODE_FILTER operation. Currently, flags must
be 0. This is functionally equivalent to prctl(PR_SET_SECCOMP, ...).
In addition to the TSYNC flag later in this patch series, there is a
non-zero chance that this syscall could be used for configuring a fixed
argument area for seccomp-tracer-aware processes to pass syscall arguments
in the future. Hence, the use of "seccomp" not simply "seccomp_add_filter"
for this syscall. Additionally, this syscall uses operation, flags,
and user pointer for arguments because strictly passing arguments via
a user pointer would mean seccomp itself would be unable to trivially
filter the seccomp syscall itself.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Conflicts:
arch/x86/syscalls/syscall_32.tbl
arch/x86/syscalls/syscall_64.tbl
include/uapi/asm-generic/unistd.h
kernel/seccomp.c
And fixup of unistd32.h to truly enable sys_secomp.
Change-Id: I95bea02382c52007d22e5e9dc563c7d055c2c83f
Separates the two mode setting paths to make things more readable with
fewer #ifdefs within function bodies.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
To support splitting mode 1 from mode 2, extract the mode checking and
assignment logic into common functions.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
In preparation for having other callers of the seccomp mode setting
logic, split the prctl entry point away from the core logic that performs
seccomp mode setting.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
while_each_thread() and next_thread() should die, almost every lockless
usage is wrong.
1. Unless g == current, the lockless while_each_thread() is not safe.
while_each_thread(g, t) can loop forever if g exits, next_thread()
can't reach the unhashed thread in this case. Note that this can
happen even if g is the group leader, it can exec.
2. Even if while_each_thread() itself was correct, people often use
it wrongly.
It was never safe to just take rcu_read_lock() and loop unless
you verify that pid_alive(g) == T, even the first next_thread()
can point to the already freed/reused memory.
This patch adds signal_struct->thread_head and task->thread_node to
create the normal rcu-safe list with the stable head. The new
for_each_thread(g, t) helper is always safe under rcu_read_lock() as
long as this task_struct can't go away.
Note: of course it is ugly to have both task_struct->thread_node and the
old task_struct->thread_group, we will kill it later, after we change
the users of while_each_thread() to use for_each_thread().
Perhaps we can kill it even before we convert all users, we can
reimplement next_thread(t) using the new thread_head/thread_node. But
we can't do this right now because this will lead to subtle behavioural
changes. For example, do/while_each_thread() always sees at least one
task, while for_each_thread() can do nothing if the whole thread group
has died. Or thread_group_empty(), currently its semantics is not clear
unless thread_group_leader(p) and we need to audit the callers before we
can change it.
So this patch adds the new interface which has to coexist with the old
one for some time, hopefully the next changes will be more or less
straightforward and the old one will go away soon.
Bug 200004307
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Sergey Dyasly <dserrg@gmail.com>
Tested-by: Sergey Dyasly <dserrg@gmail.com>
Reviewed-by: Sameer Nanda <snanda@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: "Ma, Xindong" <xindong.ma@intel.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: "Tu, Xiaobing" <xiaobing.tu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 0c740d0afc)
Signed-off-by: Sri Krishna chowdary <schowdary@nvidia.com>
Change-Id: Id689cb1383ceba2561b66188d88258619b68f5c6
Reviewed-on: http://git-master/r/419041
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
A number of situations currently require the heavyweight smp_mb(),
even though there is no need to order prior stores against later
loads. Many architectures have much cheaper ways to handle these
situations, but the Linux kernel currently has no portable way
to make use of them.
This commit therefore supplies smp_load_acquire() and
smp_store_release() to remedy this situation. The new
smp_load_acquire() primitive orders the specified load against
any subsequent reads or writes, while the new smp_store_release()
primitive orders the specifed store against any prior reads or
writes. These primitives allow array-based circular FIFOs to be
implemented without an smp_mb(), and also allow a theoretical
hole in rcu_assign_pointer() to be closed at no additional
expense on most architectures.
In addition, the RCU experience transitioning from explicit
smp_read_barrier_depends() and smp_wmb() to rcu_dereference()
and rcu_assign_pointer(), respectively resulted in substantial
improvements in readability. It therefore seems likely that
replacing other explicit barriers with smp_load_acquire() and
smp_store_release() will provide similar benefits. It appears
that roughly half of the explicit barriers in core kernel code
might be so replaced.
[Changelog by PaulMck]
(cherry picked from commit 47933ad41a)
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20131213150640.908486364@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Note: This patch is from v6 of Takahiro's proposed
"arm64: add seccomp support" patchset (leecam@google.com)
secure_computing() is called first in syscall_trace_enter() so that a system
call will be aborted quickly without doing succeeding syscall tracing,
contrary to other cases, if seccomp rules deny that system call.
On compat task, syscall numbers for system calls allowed in seccomp mode 1
are different from those on normal tasks, and so _NR_seccomp_xxx_32's need
to be redefined.
Signed-off-by: AKASHI Takahiro <takahiro.akashi <at> linaro.org>
Conflicts:
arch/arm64/Kconfig
arch/arm64/kernel/entry.S
Change-Id: I5ec44507d7e536df7ec9d62d30a418c26ef15100
Note: This patch is from v6 of Takahiro's proposed
"arm64: add seccomp support" patchset (leecam@google.com)
SIGSYS is primarily used in secure computing to notify tracer.
This patch allows signal handler on compat task to get correct information
with SA_SYSINFO specified when this signal is delivered.
Signed-off-by: AKASHI Takahiro <takahiro.akashi <at> linaro.org>
Note: This patch is from v6 of Takahiro's proposed
"arm64: add seccomp support" patchset (leecam@google.com)
This patch allows compat task to issue seccomp() system call.
Signed-off-by: AKASHI Takahiro <takahiro.akashi <at> linaro.org>
Conflicts:
arch/arm64/include/asm/unistd32.h
Change-Id: I63d38f68da72b3333327256b4cacba2c3ddb39fc
Note: This patch is from v6 of Takahiro's proposed
"arm64: add seccomp support" patchset (leecam@google.com)
Those values (__NR_seccomp_*) are used solely in secure_computing()
to identify mode 1 system calls. If compat system calls have different
syscall numbers, asm/seccomp.h may override them.
Acked-by: Arnd Bergmann <arnd <at> arndb.de>
Signed-off-by: AKASHI Takahiro <takahiro.akashi <at> linaro.org>
Note: This patch is from v6 of Takahiro's proposed
"arm64: add seccomp support" patchset (leecam@google.com)
If tracer specifies -1 as a syscall number, this traced system call should
be skipped with a value in x0 used as a return value.
This patch enables this semantics, but there is a restriction here:
when syscall(-1) is issued by user, tracer cannot skip this system call
and modify a return value at syscall entry.
In order to ease this flavor, we need to treat whatever value in x0 as
a return value, but this might result in a bogus value being returned,
especially when tracer doesn't do anything at this syscall.
So we always return ENOSYS instead, while we have another chance to change
a return value at syscall exit.
Please also note:
* syscall entry tracing and syscall exit tracing (ftrace tracepoint and
audit) are always executed, if enabled, even when skipping a system call
(that is, -1).
In this way, we can avoid a potential bug where audit_syscall_entry()
might be called without audit_syscall_exit() at the previous system call
being called, that would cause OOPs in audit_syscall_entry().
* syscallno may also be set to -1 if a fatal signal (SIGKILL) is detected
in tracehook_report_syscall_entry(), but since a value set to x0 (ENOSYS)
is not used in this case, we may neglect the case.
Signed-off-by: AKASHI Takahiro <takahiro.akashi <at> linaro.org>
Conflicts:
arch/arm64/kernel/entry.S
Change-Id: Ifcdcdbcb7c8cf97e5b5f1086a1ea4107e1d4f9a8
Note: This patch is from v6 of Takahiro's proposed
"arm64: add seccomp support" patchset (leecam@google.com)
To allow tracer to be able to change/skip a system call by re-writing
a syscall number, there are several approaches:
(1) modify x8 register with ptrace(PTRACE_SETREGSET), and handle this case
later on in syscall_trace_enter(), or
(2) support ptrace(PTRACE_SET_SYSCALL) as on arm
Thinking of the fact that user_pt_regs doesn't expose 'syscallno' to
tracer as well as that secure_computing() expects a changed syscall number
to be visible, especially case of -1, before this function returns in
syscall_trace_enter(), we'd better take (2).
Signed-off-by: AKASHI Takahiro <takahiro.akashi <at> linaro.org>
Currently DL aggregation is supported in RNDIS driver and is set to
3 by default. And there is no support to change downlink maximum
packets per transfer at runtime through module parameter. Hence add
module parameter for DL maximum packets per transfer to change it at
runtime.
echo 6 > /sys/module/g_android/parameters/rndis_dl_max_pkt_per_xfer
To disable DL aggregation during runtime,
echo 1 > /sys/module/g_android/parameters/rndis_dl_max_pkt_per_xfer
Change-Id: I3a1d0bc97358e2b6f233df7ae8725fb507de50db
Signed-off-by: Xerox Lin <xerox_lin@htc.com>
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
This change adds module param which allows to disable RNDIS
Multi-packet Feature (Aggregation support in Downlink path)
as this feature is enabled by default.
To disable use this param before moving to RNDIS Composition:
echo 1 > /sys/module/g_android/parameters/rndis_multipacket_dl_disable
Also counts errors as Rx errors if received RNDIS packets are
not following RNDIS message format as those packets are being
discarded.
Change-Id: I764430da78f2204af92e14bb279c11b24c7e4c67
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Add data aggregation support using RNDIS Multi Packet feature
to achieve better UDP Downlink throughput. Max 3 RNDIS Packets
aggregated into one RNDIS Packet with this implementation.
With this change, seeing UDP Downlink throughput increase
from 90 Mbps to above 100 Mbps when using Iperf and sending
data more than 100 Mbps.
Change-Id: I21c39482718944bb1b1068bdd02f626531e58f08
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Rajkumar Raghupathy <raghup@codeaurora.org>
For dual speed gadget, with current no. of request(10), there is
possibility of corner case occurence where all 10 reuqests are queued
to HW without setting IOC bit, which could lead to data stall in
RNDIS tethering and RNDIS local networking.
With this patch, counter will be incremented before queueing request to
HW and sets IOC bit for every nth request due to which the corner case
of all requests queued to HW without IOC bit set will be avoided.
Change-Id: I26515bfd9bbc8f7af38be7835692143f7093118a
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
On windows 7 platform, previously allocated ip address is maintained.
However, Host MAC address of 'usb0' interface is changed when the
tethering driver re-enumerated. Thus, the tethering network driver
can't be allocated ip address from dhcp. It causes connection delay
between host and phone for usb tethering.
This patch prevents from changing Host MAC address of 'usb0' interface.
In other words, this patch maintains the Host MAC address allocated when
first tethering driver although the driver is re-enumerated. However,
after reboot, the Host MAC address can be changed.
Change-Id: I43add9925e9d6d90c56cffbd3ed999104448f818
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
u_ether driver passes rx data to network layer and resubmits the
request back to usb hardware in interrupt context. Network layer
processes rx data by scheduling tasklet. For high throughput
scenarios on rx data path driver is spending lot of time in interrupt
context due to rx data processing by tasklet and continuous completion
and re-submission of the usb requests which results in watchdog bark.
Hence move the rx data processing and usb request submission to a
workqueue bottom half handler.
Change-Id: I316de8e267997137ac189a8b7b2846fa325f4a5a
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Some kernel files may include both linux/compat.h and asm/compat.h directly
or indirectly. Since both header files contain is_compat_task() under
!CONFIG_COMPAT, compiling them with !CONFIG_COMPAT will eventually fail.
Such files include kernel/auditsc.c, kernel/seccomp.c and init/do_mountfs.c
(do_mountfs.c may read asm/compat.h via asm/ftrace.h once ftrace is
implemented).
So this patch proactively
1) removes is_compat_task() under !CONFIG_COMPAT from asm/compat.h
2) replaces asm/compat.h to linux/compat.h in kernel/*.c,
but asm/compat.h is still necessary in ptrace.c and process.c because
they use is_compat_thread().
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Conflicts:
arch/arm64/kernel/hw_breakpoint.c
arch/arm64/kernel/ptrace.c
Change-Id: I5b8330e43ab8bdd383cd410d8223d6c1a39fa0fc
